Then number of T-states of the instruction STA in 8085 microprocessor is A) 10 B) 12 C) 13 D) 16 

1 Answer

Answer :

Then number of T-states of the instruction STA in 8085 microprocessor is 13 

Related questions

Description : In 8085 microprocessor, how many T-states does OPCODE FETCH machine cycle normally require (i.e., when HOLD and WAIT signals are NOT forced)? A) 4 to 6 B) 3 to 8 C) 2 to 3 D) 8 to 12 

Last Answer : In 8085 microprocessor, how many T-states does OPCODE FETCH machine cycle normally require (i.e., when HOLD and WAIT signals are NOT forced)? A) 4 to 6 B) 3 to 8 C) 2 to 3 D) 8 to 12 

Description : The 8085 Microprocessor has A) 8-bits Data bus and 16-bits Address bus B) 8-bits Data bus and 8-bits Address bus C) 16-bits Data bus and 16-bits Address bus D) 32-bits Data bus and 8-bits Address bus 

Last Answer : B) 8-bits Data bus and 8-bits Address bus. 

Description : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs

Last Answer : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs

Description : What is the size of memory which can be accessed by direct accessing in 8085 microprocessor? A) 64 kB B) 4 kB C) 128 kB D) 128 MB 

Last Answer : What is the size of memory which can be accessed by direct accessing in 8085 microprocessor? A) 64 kB B) 4 kB C) 128 kB D) 128 MB 

Description : Explain Briefly The Flag Register In The 8085 Microprocessor.?

Last Answer : Answer :The flag register in 8085 is an 8-bit register which contains 5 bit positions. These five flags are of 1bit F/F and are known as zero, sign, carry, parity and auxiliary carry. ... addition and subtraction operations. The parity flag is used for results containing an even number of one's.

Description : Mention The Various Functional Blocks Of The 8085 Microprocessor.?

Last Answer : Answer :The various functional blocks of the 8085 microprocessor are: Registers Arithmetic logic unit Address buffer Increment / decrement address latch Interrupt control Serial I/O control Timing and control circuitry Instructions decoder and machine cycle encoder.

Description : How Can Signals Be Classified For The 8085 Microprocessor?

Last Answer : Answer :The signals of the 8085 microprocessor based on their functions can be classified into 7 categories namely: Frequency and power signals Address and data buses The control bus Interrupt Signals Serial Input / Output signals DMA signals Reset Signals

Description : List any four salient features of 8085 microprocessor

Last Answer : Features of 8085:  1. 16 address line so 216=64 Kbytes of memory can be addressed.  2. Operating clock frequency is 3MHz and minimum clock frequency is 500 KHz.  3. On chip bus controller ... duty cycle TTL clock  10. Provide 2 serial I/O lines, so peripheral can be interfaced with 8085 μp

Description :  What is the size of SP register in 8085 microprocessor? A) 16 bits B) 8 bits C) 64 bits D) 48 bits

Last Answer :  What is the size of SP register in 8085 microprocessor? A) 16 bits B) 8 bits C) 64 bits D) 48 bits

Description : The ALE line of an 8085 microprocessor is used to (A) latch the output of an I/O instruction into an external latch. (B) deactivate the chip-select signal from memory devices. (C) find the interrupt ... of the TRAP interrupt. (D) latch the 8 bits of address lines AD7-AD0 into an external latch.

Last Answer : The ALE line of an 8085 microprocessor is used to latch the 8 bits of address lines AD7-AD0 into an external latch.

Description : In 8085, whenever a signal is received at TRAP terminal, its program execution is transferred to a subroutine on address A) 0000 H B) 002C H C) 0024 H D) 0004 H

Last Answer : In 8085, whenever a signal is received at TRAP terminal, its program execution is transferred to a subroutine on address 0024 H

Description : Explain The Flow Of A Typical Instruction Word.?

Last Answer : Answer :The flow of a typical Instruction word is as follows: The content of the program counter of 2 byte is transferred to the address register known as MAR ( memory address register ). This ... bus. Now the data is placed in the instruction register which will eventually decode and execute it.

Description : What Happens When Hlt Instruction Is Executed In Processor?

Last Answer : Answer :The Micro Processor enters into Halt-State and the buses are tri-stated.

Description : Explain count up (CTU) instruction with timing diagram.

Last Answer : The CTU is an instruction that counts false-to-true rung transitions. Rung transitions can be caused by events occurring in the program. When rung conditions for a CTU instruction have made a false-to-true ... of Counter up(CTU) Instruction: Too many uploads - please try again in an hour

Description : Application Specific Instruction Set Processor (ASIP)

Last Answer : An application specific instruction set processor (ASIP) can serve as a compromise between the general purpose processor and single-purpose processors. An ASIP is a Programmable processor ... fetch sequential data memory locations in parallel with other operations to further speed execution.

Description : Which of the following instructions is not available in 8085 microprocessor? (A) LDA 3850 (B) XTHL (C) push PSW (D) LDAXH

Last Answer : Which of the following instructions is not available in 8085 microprocessor? (A) LDA 3850 (B) XTHL (C) push PSW (D) LDAXH

Description : In an 8085 microprocessor, after the execution of XRA A instruction A) the carry flag is set B) the accumulator contains FFH C) the zero flag is set D) the accumulator contents are shifted left by one bit

Last Answer :  In an 8085 microprocessor, after the execution of XRA A instruction the zero flag is set 

Description : Which flag does not change by the execution of the instruction DCR B in 8085 microprocessor ?  (a) Parity (b) Carry (c) Zero (d) Sign

Last Answer : Which flag does not change by the execution of the instruction DCR B in 8085 microprocessor ?  (a) Parity (b) Carry (c) Zero (d) Sign

Description : How many operations are there in the instruction set of 8085 microprocessor?

Last Answer : There are 74 operations in the 8085 microprocessor.

Description : How many speed of 8088,8085,8086 microprocessor: a. 2.5 Million instruction per second b. 1.5 Million instruction per second c. 3.5 Million instruction per second d. 1.6 Million instruction per second

Last Answer : a. 2.5 Million instruction per second

Description : In an 8085 microprocessor, the instruction CMP B has been executed while the contentsof accumulator is less than that of register B. As a result carry flag and zero flag will berespectively (A) set, reset (B) reset, set (C) reset, reset (D) set, set

Last Answer : (A) set, reset

Description : Describe Briefly The Accumulator Register Of 8085.?

Last Answer : Answer :It is one of the most important 8 bit register of 8085 It is responsible for coordinating input and output to and from the microprocessor through it. The primary purpose of ... logical operations. This accumulator register is mainly used for arithmetic, logical, store and rotate operations.

Description : Explain In Brief The Control And Timing Circuitry Of The 8085.?

Last Answer : Answer :The timing and control circuitry section of the 8085 is responsible for the generation of timing and control signals so that instructions can be executed. The types of signals involved ... of control signals for the executions of instructions and for the sync between external devices.

Description : Does The 8085 Support Externally Initiated Operations? If Yes How?

Last Answer : Answer :Yes the 8085 does support several externally initiated operations. The possible operations and the corresponding pins for them in the 8085 are as follows: It supports resetting ( this is possible ... It also has a HOLD pin which can basically pause the operation till required/ as required.

Description : Mention The Different Types Of Data Transfers Possible In The 8085.?

Last Answer : Answer :The various types of data transfer operations possible are: Data transfer is possible between two registers. It is also possible between a memory location and a register. Also it can occur between ... . In reality data is never transferred it can only be copied from one location to another.

Description : Explain All The Addressing Modes Of The 8085 With The Help Of Examples.?

Last Answer : Answer :The various types of addressing modes of the 8085 are as follows: Direct addressing: The instructions in itself contain the opearand. For ex. STA5513H or in/out instructions such as IN PORT C. ... etc. Implicit addressing: this form of addressing contains no operands. For ex. RAR, CMA etc.

Description : Explain Briefly What Happens When The Intr Signal Goes High In The 8085?

Last Answer : Answer :The INTR is a maskable interrupt for the 8085. It has the lowest priority and is also non vectored. When this INTR signal goes into the high state the following things occur / ... the processor saves the address of new instruction into the STACK and an interrupt service subroutine begins.

Description : Explain Briefly The Trap Input For The 8085.?

Last Answer : Answer :The TRAP input is sensitive to both edge and level. The pulse width for this signal should be in excess as compared to the normal noise width. A second trap will never be able to ... to low transition. The pulse widths are wider than normal widths so as to prevent unwanted false triggers.

Description : Can An Rc Circuit Be Used As Clock Source For 8085?

Last Answer : Answer :Yes, it can be used, if an accurate clock frequency is not required. Also, the component cost is low compared to LC or Crystal.

Description : In 8085 Which Is Called As High Order / Low Order Register?

Last Answer : Answer :Flag is called as Low order register & Accumulator is called as High order Register.

Description : How Many Interrupts Are There In 8085?

Last Answer : Answer :There are 12 interrupts in 8085.

Description : In What Way Interrupts Are Classified In 8085?

Last Answer : Answer :In 8085 the interrupts are classified as Hardware and Software interrupts.

Description : Which Stack Is Used In 8085?

Last Answer : Answer :LIFO (Last In First Out) stack is used in 8085.In this type of Stack the last stored information can be retrieved first.

Description : What Are The Various Flags Used In 8085?

Last Answer : Answer :Sign flag, Zero flag, Auxillary flag, Parity flag, Carry flag.

Description : What Are The Various Registers In 8085?

Last Answer : Answer :Accumulator register, Temporary register, Instruction register, Stack Pointer, Program Counter are the various registers in 8085.

Description : The 16 bit flag of 8086 microprocessor is responsible to indicate ___________ A. the condition of result of ALU operation B. the condition of memory C. the result of addition D. the result of subtraction 

Last Answer : The 16 bit flag of 8086 microprocessor is responsible to indicate the condition of result of ALU operation

Description : In 8086 microprocessor , the address bus is ________ bit wide A. 12 bit B. 10 bit C. 16 bit D. 20 bit

Last Answer : In 8086 microprocessor, the address bus is 20 bit

Description : The microprocessor can read/write 16 bit data from or to ________ A. memory B. I /O device C. processor D. register

Last Answer : The microprocessor can read/write 16 bit data from or to memory 

Description : The intel 8086 microprocessor is a _______ processor A. 8 bit B. 16 bit C. 32 bit D. 4 bit

Last Answer : The intel 8086 microprocessor is a 16 bit processor 

Description : The purpose of the microprocessor is to control ______  A. memory B. switches C. processing D. tasks

Last Answer : The purpose of the microprocessor is to control memory 

Description : Microprocessor is the ______ of the computer and it perform all the computational tasks  A. main B. heart C. important D. simple

Last Answer : Microprocessor is the heart of the computer and it performs all the computational tasks

Description : Microprocessor is a/an _______ circuit that functions as the CPU of the compute  A. electronic B. mechanic C. integrating D. processing

Last Answer : Microprocessor is a/an electronic  circuit that functions as the CPU of the compute 

Description : A microprocessor is a _______ chip integrating all the functions of a CPU of a computer.  A. multiple B. single C. double D. triple

Last Answer : A microprocessor is a single chip integrating all the functions of a CPU of a computer.

Description :  In a 16-bit microprocessor, a single word is A) 16 bit data B) 32 bit data C) 8 bit data D) 64 bit data 

Last Answer :  In a 16-bit microprocessor, a single word is 16 bit data

Description : In the 8085A Microprocessor, arithmetic and logical operations are performed through which of the following? A) Stack B) ALU C) I/O D) Register 

Last Answer : In the 8085A Microprocessor, arithmetic and logical operations are performed through which of the following? A) Stack B) ALU C) I/O D) Register 

Description : What is the Power Supply specification for 8085AH microprocessor? A) Single +5V supply with 10% voltage margins B) Dual +5V supply with 10% voltage margins C) Single +10V supply with 5% voltage margins D) Dual +5V supply with 5% voltage margins 

Last Answer : What is the Power Supply specification for 8085AH microprocessor? A) Single +5V supply with 10% voltage margins B) Dual +5V supply with 10% voltage margins C) Single +10V supply with 5% voltage margins D) Dual +5V supply with 5% voltage margins 

Description : What is the difference between a microcontroller and a microprocessor?

Last Answer : Compare microprocessor and microcontroller Microprocessor Microcontroller 1)Inbuilt RAM and ROM 1)Do not have inbuilt RAM or ROM 2)Inbuilt timer 2)Doesn't have inbuilt timer ... same memory 6)Many Multifunction pins on the IC  6)less multifunction Pins on IC.

Description : In 8085 microprocessor, the value of the most significant bit of the result following the execution of any arithmetic of Boolean instruction is stored in the (1) Carry status flag (2) Auxiliary carry status flag (3) Sign status flag (4) Zero status flag

Last Answer : In 8085 microprocessor, the value of the most significant bit of the result following the execution of any arithmetic of Boolean instruction is stored in the Sign status flag

Description : 8085 microprocessor has ________ individual flags during arithmetic and logic operations.

Last Answer : 8085 microprocessor has 5 individual flags during arithmetic and logic operations.

Description : When a program is being executed in an 8085 microprocessor, its Program Counter contains  (A) the number of instructions in the current program that have already been executed (B) the total number ... is being currently executed (D) the memory address of the instruction that is to be executed next

Last Answer : When a program is being executed in an 8085 microprocessor, its Program Counter contains the memory address of the instruction that is to be executed next