State the classification of single phase induction motors.

2 Answers

Answer :

1. Split phase induction motor

2. Capacitor start induction motor

3. Capacitor run induction motor

4. Shaded pole induction motor

Answer :

Types of single phase induction motors:

1. Split phase induction motor. 2. Capacitor start inductor motor. 3. Capacitor start capacitor run induction motor. 4. Permanent split capacitor motor. 5. Shaded pole induction motor. 

Related questions

Description : State the types of single phase induction motors.

Last Answer : The types of single phase induction motors are: i) Resistance split phase induction motor. ii) Capacitor split phase inductor motor. a. Capacitor start induction run motor b. permanent capacitor motor c. capacitor start capacitor run induction motor iii) Shaded pole induction motor.

Description : Where do we require single-phase induction motors?

Last Answer : Single-phase induction motors are required where (i) 3 phase supply is not available (ii) Efficiency is of lesser importance (iii) Rating is less than one H.P. (iv) Equipment is portable

Description : SINGLE PHASE INDUCTION MOTORS MCQ

Last Answer : 101. After the starting winding of a single phase induction motor is disconnected from supply, it continues to run only on (a) running winding (b) rotor winding (c) field winding (d) compensating winding Ans: a ... motor is usually reduced by using (a) gearing (b) belts (c) brakes (d) chains Ans: a

Description : (a) Define permeability. (b) Define MMF. (c) Define form factor of an alternating quantity. (d) Define frequency and time period of an alternating quality. (e) Define transformation ratio of transformer. ... and state the meaning of each term used. (g) Give two applications of single phase motors. 

Last Answer : Permeability : It is the ability of a magnetic/Non magnetic material to allow setting up of flux in it.  MMF : The magneto motive force (MMF) is the force required to setup flux in a magnetic / ... applications of single phase motors : Water pumps, ceiling fan, lathe machine

Description : Most three-phase induction motors of five horsepower or less, are started by _____________. A. autotransformer starters B. resistor starters C. across-the-line starters D. reactor starters

Last Answer : Answer: C

Description : Most three-phase induction motors used for driving engine room auxiliaries are started by _____________. A. resistor starters B. across-the-line starters C. impedance starters D. reactor starters

Last Answer : Answer: B

Description : Why are centrifugal switches provided on many 1-phase Induction motors?

Last Answer : Centrifugal switches are provided on many 1-phase Induction motors to disconnect the starting / auxiliary winding from the supply when the motor reaches about 70% of its synchronous speed.

Description : Name types of 1-phase induction motors.

Last Answer : Based on the method of starting arrangement provided, the 1-phase Induction motors are classified as follows (i) Split-phase motor (ii) Shaded pole motor (iii) Resistor start Induction run ... iv) capacitor start Induction run single phase IM (v) capacitor start Capacitor run single phase IM

Description : Name the two different theories with which principle of 1-phase induction motors are explained

Last Answer : The two different theories are · Double revolving field theory · Cross field theory

Description : How do split-phase induction motors become self-starting?

Last Answer : By using combinations of inductance and capacitance to apply out-of phase currents in starting windings.

Description : THREE PHASE INDUCTION MOTORS MCQ

Last Answer : 101. Insertion of resistance in the stator of an induction motor (a) increases the load torque (b) decreases the starting torque (c) increases the starting torque (d) none of the above Ans: b

Description : Deep bar rotor construction is used in three phase induction motors to mainly: (1) Control speed (2) Control power factor (3) Increase starting torque (4) None of these

Last Answer : Deep bar rotor construction is used in three phase induction motors to mainly: Increase starting torque

Description : State applications of single phase AC motors. 

Last Answer : Water pumps ceiling fan & air conditioners. lathe machine washing machines. Blowers Mixers & grinders Compressors Conveyers Refrigerators.

Description : Explain the working of a single phase capacitor start induction motor. 

Last Answer : Single phase capacitor start induction motor https://youtu.be/31lvvzU5Puc

Description : In a single-phase induction motor, the operating direction is determined by the ________ A) Rotor B) Stator C) Starting circuit D) None of these

Last Answer : In a single-phase induction motor, the operating direction is determined by the Starting circuit

Description : What is the slip (as a percentage) when a 6 pole single phase induction motor operating on 220 V and 60 Hz is rotating at speed of 1140 rpm? A) 60% B) 5% C) 10% D) None of these

Last Answer : What is the slip (as a percentage) when a 6 pole single phase induction motor operating on 220 V and 60 Hz is rotating at speed of 1140 rpm? A) 60% B) 5% C) 10% D) None of these

Description : In the capacitor-start, capacitor-run single-phase induction motor (A) two capacitors are connected across the main winding (B) when the centrifugal switch opens, the permanent capacitor is left ... left in the main winding circuit (D) two capacitors are connected across the auxiliary winding.

Last Answer : In the capacitor-start, capacitor-run single-phase induction motor when the centrifugal switch opens, the permanent capacitor is left in the auxiliary winding circuit

Description : The meter constant of a single-phase 230 V induction watt hour meter is 400 revolutions per kWh. The speed of the meter disc for a current of 10 A of 0.9 pf lagging will be

Last Answer : The meter constant of a single-phase 230 V induction watt hour meter is 400 revolutions per kWh. The speed of the meter disc for a current of 10 A of 0.9 pf lagging will be 13.80 rpm

Description : A capacitor start, capacitor run single phase induction motor is basically a : -  a) ac series motor b) dc series motor c) 2 phase induction motor d) 3 phase induction motor

Last Answer : A capacitor start, capacitor run single phase induction motor is basically a : -  2 phase induction motor 

Description : Starting torque can be obtained in the case of a single phase induction motor with identical main and auxiliary windings by connecting:  (1) A capacitor across the mains (2) A capacitor in ... with the auxiliary winding (4) Equal value capacitors in series with the main and the auxiliary windings

Last Answer : Starting torque can be obtained in the case of a single phase induction motor with identical main and auxiliary windings by connecting:  A capacitor is series with the auxiliary winding.

Description : In a capacitor start single-phase induction motor, the capacitor is connected in:  (A) series with the main winding (B) series with the auxiliary winding (C) series with both the windings (D) parallel with the auxiliary winding .

Last Answer : In a capacitor start single-phase induction motor, the capacitor is connected in: series with the auxiliary winding 

Description : How speed control is made in single phase motors?

Last Answer : It is usually controlled by applying a variable voltage from tapped transformers, variacs, potentio meters, and tapped reactors.

Description : Which type of torque is developed in single phase motors?

Last Answer : Pulsating torque is produced.

Description : Which type of rotor is used in single phase motors?

Last Answer : Squirrel cage type

Description : Why single-phase motors are not self-starting?

Last Answer : When a 1φ supply is given to the single winding of the single phase motor, the field produced by it changes in magnitude and direction sinusoidally (pulsating flux). Such and alternating field is equivalent ... developed by the motor is equal to zero. So a single-phase motor is not self-starting.

Description : The single phasing relays are used for the protection of (a) single phase motors only (b) two phase motors only (c) two single phase motors running in parallel (d) three phase motors

Last Answer : (d) three phase motors

Last Answer : The capacitors used in single-phase capacitor motors have no polarity marking.

Last Answer : In capacitor start single-phase motors current in the starting winding leads the voltage.

Description : The relative speed between the magnetic fields of stator and rotor under steady state operation is zero for a (A) dc machine. (B) 3 phase induction machine. (C) synchronous machine. (D) single phase induction machine.

Last Answer : Ans: all options are correct

Description : How to control the speed of induction motors? Do variable frequency drives plays a role in that?

Last Answer : VSD - DC/DC usage to drive compressors allows controlling and accurate measurements on speed and torque of compressor motors, and so enhancing its application characteristics. Integrating of VSD ... vital auxiliary circuit. The converter is analyzed; design and considerations have been discussed.

Description : Which of the listed motors will operate at the highest RPM, assuming that each operates at the same frequency? A. A four-pole synchronous motor under normal load. B. A four-pole induction motor under ... A six-pole synchronous motor under normal load. D. A six-pole induction motor under full load.

Last Answer : Answer: A

Description : The air gap provided in induction motors should be checked periodically with a feeler gage to detect an unequal air gap and _____________. A. decreased motor magnetizing current B. hysteresis loses C. increased power factor D. mechanical damage to the rotor

Last Answer : Answer: D

Description : Which of the following types of motors is often designed for use in correcting power factor? A. Polyphase B. Wound-rotor C. Induction D. Synchronous

Last Answer : Answer: D

Description : Autotransformer starters or compensators are sometimes used with polyphase induction motors to _____________. A. reduce the voltage applied to the motor during the starting period B. increase the voltage for ' ... to be either stepped up or down, depending on the application, to ensure full torque

Last Answer : Answer: A

Description : In general, polyphase induction motors can be started on full line voltage by means of ______________. A. compensator starters B. autotransformer starters C. across-the-line starters D. primary-resistor starters

Last Answer : Answer: C

Description : Low horsepower, polyphase, induction motors can be started with full voltage by means of _____________. A. compensator starters B. autotransformer starters C. across-the-line starters D. primary-resistor starters

Last Answer : Answer: C

Description : Why Induction motors are widely used in Industries?

Last Answer : Answer: In Industries 80% of the motor drives used are induction motors. Induction Motors are widely used in Industries because of some features it possess. They are: • Low Cost • Simple and Rugged Construction • Absence of Commutator • Good power factor • Higher efficiency • Good Speed Regulation

Description : Slip ring induction motor advantages and disadvantages compared to squirrel cage motors?

Last Answer : Advantages: High starting torque with low starting current Smooth acceleration under heavy loads No abnormal heating during starting Good running characteristics after external rotor resistances are cut out ... cage motors The speed regulation is poor when run with resistance in the rotor circuit

Description : What are the advantages and disadvantages of Induction Motors?

Last Answer : Advantages: It is simple and rugged in construction It is relatively cheap Induction motors require less maintenance Induction motor has high efficiency and reasonably good power factor 3-phase induction ... and its speed cannot be changed easily Its starting torque is inferior to dc shunt motor

Description : Why do we use capacitor-start induction motors in applications requiring high starting torque in preference to repulsion induction motors?

Last Answer : Capacitors are easily available, cheaper and reliable. Repulsion-induction motors posses a special commutator and brushes that require maintenance. Most manufacturers have stopped making them.

Description : Why capacitor –start induction motors advantageous?

Last Answer : In capacitor start induction motors capacitor is connected in series with the auxiliary winding. When speed of the motor approaches to 75 to 80% of the synchronous speed the starting winding gets ... torque is proportional to phase angle ά and hence such motors produce very high starting torque.

Description : Give applications of Capacitor start Induction run motors.

Last Answer : Drilling machine, centrifugal pump, grinders , refrigerator etc

Description : Why do we use capacitor-start induction motors in applications requiring high starting torque in preference to repulsion induction motors?

Last Answer : Ans : Capacitors are easily available, cheaper and reliable. Repulsion-induction motors posses a special commutator and brushes that require maintenance. Most manufacturers have stopped making them.

Description : Straight silicon steel (containing Si from 0.5 to 5%) because of their low hysteresis loss and high magnetic permeability are used for electrical appliances. Which of the following electrical ... /generators (B) Generators and small motors (C) Induction motors (D) High frequency transformers

Last Answer : (D) High frequency transformers

Description : On which Following products is labelling not Voluntary a) Colour TV c) Ceiling fans b) Ballast d) Induction motors

Last Answer : Colour TV

Description : Products on which labeling is voluntary are a) Electric geysers b) Induction motors b) Ceiling fans d) All of the above

Last Answer : All of the above

Description : In induction motors, the length of air gap in kept as small as mechanically possible is order to have (a) low power factor (b) high power factor (c) high over load capacity (d) any of the above

Last Answer : (b) high power factor

Description : What is the effect of following on induction motors: (1) Voltage unbalance (2) Harmonic distortion

Last Answer : i) Effect of voltage unbalance: For three phase motors this leads to unequal currents in the three phase windings that result in unbalance in the fields produced due to which negative phase ... currents thereon). This leads to motor failures, lower life and improper torque speed characteristics. 

Description : The speed and torque of induction motors can be varied by which of the following means: 1) Stator voltage control 2) Rotor voltage control 3) Frequency control 4) All of these

Last Answer : All can off them can control speed and torque of induction motor.This is because  increased supply frequency increases synchronous speed  which will definetly affect torque and speed . .Both stator and rotor  voltage control are proportional to torque and slip.

Description : In the Squirrel cage induction motors, the rotor slots are usually a slight skew to reduce (A) Windage losses (B) Eddy currents (C) Accumulation of dirt and dust (D) Magnetic hum

Last Answer : Eddy   currents.