Pick out the wrong statement. (A) A soft magnetic material should have high permeability and small area of hysteresis loop (B) Poisson's ratio of high melting point metals is more than unity (C) Solders generally melt at less than 185°C (D) Steel produced by B.O.F process is ideally suited for manufacturing flat product

Pick out the wrong statement.
(A) A soft magnetic material should have high permeability and small area of
hysteresis loop
(B) Poisson's ratio of high melting point metals is more than unity
(C) Solders generally melt at less than 185°C
(D) Steel produced by B.O.F process is ideally suited for manufacturing flat
product
by

1 Answer

Answer :

Option B
by

Related questions

Pick out the wrong statement. (A) A ferromagnetic material becomes paramagnetic above the 'Curie temperature' (B) Permanent magnets are made of hard materials, whereas electromagnets require soft magnetic materials (C) Soft magnetic materials (e.g., pure iron) have higher permeability and low hysterisis loss and coercive forces (D) Tungsten steel and alnico are not hard magnetic materials

Description : Pick out the wrong statement. (A) A ferromagnetic material becomes paramagnetic above the 'Curie temperature' (B) Permanent magnets are made of hard materials, whereas electromagnets require soft ... hysterisis loss and coercive forces (D) Tungsten steel and alnico are not hard magnetic materials

Last Answer : Option D

Pick out the wrong statement. (A) Weldability of high carbon steel is poorer compared to low carbon steel (B) Invar is a magnetic alloy (C) Magnetic permeability of the diamagnetic material is less than one (D) Martenistic transformation never goes to completion (i.e., 100%) at room temperature

Description : Pick out the wrong statement. (A) Weldability of high carbon steel is poorer compared to low carbon steel (B) Invar is a magnetic alloy (C) Magnetic permeability of the diamagnetic material is less than one (D) Martenistic transformation never goes to completion (i.e., 100%) at room temperature

Last Answer : Option B

Draw B-H curve for magnetic material and state its nature. State the significance of hysteresis loop. Also draw the hysteresis loop for hard steel and soft steel.

Description : Draw B-H curve for magnetic material and state its nature. State the significance of hysteresis loop. Also draw the hysteresis loop for hard steel and soft steel. 

Last Answer : B-H curve for magnetic material: The B-H curve is the graphical representation of relation between flux density (B) and applied field strength (H), with H plotted on the x-axis and B plotted on ... or crossing an air gap tends to bulge outwards the iron ring, this effect is called as Fringing .

Straight silicon steel (containing Si from 0.5 to 5%) because of their low hysteresis loss and high magnetic permeability are used for electrical appliances. Which of the following electrical appliances made of silicon steel contains maximum percentage of silicon (about 4%)? (A) Armature of small motors/generators (B) Generators and small motors (C) Induction motors (D) High frequency transformers

Description : Straight silicon steel (containing Si from 0.5 to 5%) because of their low hysteresis loss and high magnetic permeability are used for electrical appliances. Which of the following electrical ... /generators (B) Generators and small motors (C) Induction motors (D) High frequency transformers

Last Answer : (D) High frequency transformers

Draw Hysteresis loop for Hard steel and soft steel. Also write one application of each material.

Description : Draw Hysteresis loop for Hard steel and soft steel. Also write one application of each material.

Last Answer : Application of Hard steel:  Fig. (a) Shows hysteresis loop for hard steel. Such materials are used for producing permanent magnets. Such a hysteresis loop represents a large residual ... Residual flux & coercive force are less. Hence material can be used for making the electromagnets. 

State Magneto-striction. Draw Hysteresis loop for : (i) High silicon steel (ii) Copper (iii) Soft iron (iv) Wood

Description : State Magneto-striction. Draw Hysteresis loop for : (i) High silicon steel (ii) Copper (iii) Soft iron (iv) Wood

Last Answer : Magneto-striction: It is the change in dimensions of ferro magnetic material when it is magnetized for eg. Silicon steel, iron or any ferromagnetic material.  i) Hysteresis loop for High silicon steel :  ... loop for Soft iron :  iv) Hysteresis loop for Copper and Wood : 

Materials subjected to rapid reversal of magnetism should have (a) large area oiB-H loop (b) high permeability and low hysteresis loss (c) high co-ercivity and high retentivity (d) high co-ercivity and low density

Description : Materials subjected to rapid reversal of magnetism should have (a) large area oiB-H loop (b) high permeability and low hysteresis loss (c) high co-ercivity and high retentivity (d) high co-ercivity and low density

Last Answer : (b) high permeability and low hysteresis loss

Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Description : Pick out the wrong statement. (A) Polymeric fibres are never produced by addition polymerisation (B) Property of tackiness is exhibited by uncured rubber (C) Sharp melting point is not observed in thermoplastic polymers (D) Polythene generally has an excellent resistance to ultra violet rays

Last Answer : (A) Polymeric fibres are never produced by addition polymerisation

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than chromate coating (C) The base metal to be electroplated is normally made the cathode of the electrolytic cell and coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Description : Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than ... coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Last Answer : (D) Calorising is the process of coating steel with chromium

Pick up the correct statement from the following: (A) Permeability is a measure of conducting the magnetic lines of force in the material (B) Permeability is a measure of the extent to which magnetic lines of force can penetrate a medium (C) Permeability is expressed as the ratio of the magnetic flux density (B) to the field strength of the magnetizing field (D) All of these

Description : Pick up the correct statement from the following: (A) Permeability is a measure of conducting the magnetic lines of force in the material (B) Permeability is a measure of the extent to which magnetic ... magnetic flux density (B) to the field strength of the magnetizing field (D) All of these

Last Answer : Answer: Option D

Explain the hysteresis loop of a magnetic material with neat diagram.

Description : Explain the hysteresis loop of a magnetic material with neat diagram.

Last Answer : Hysteresis loop of magnetic material:  The circuit arrangement for plotting the hysteresis loop is shown in figure given below. The electromagnetic part consists of a coil wound on the iron ring ... one magnetic reversal is called hysteresis loop. Meaning of hysteresis is to lag behind.

Pick out the wrong statement pertaining to the properties of glasses. Glasses generally have (A) High electrical insulation properties (B) Sharp melting points (C) Low co-efficient of thermal expansion (D) Compressive strength much greater than their tensile strengths

Description : Pick out the wrong statement pertaining to the properties of glasses. Glasses generally have (A) High electrical insulation properties (B) Sharp melting points (C) Low co-efficient of thermal expansion (D) Compressive strength much greater than their tensile strengths

Last Answer : (B) Sharp melting points

Pick up the correct statement from the following: (A) Plastics have generally low melting point (B) The coefficient of thermal expansion of plastics is about three times than that of steel (C) The acoustical boards prepared by impregnating fibre-glass with phenolic resins has absorption coefficient of about 0.67 (D) All the above

Description : Pick up the correct statement from the following: (A) Plastics have generally low melting point (B) The coefficient of thermal expansion of plastics is about three times than that of steel (C) ... fibre-glass with phenolic resins has absorption coefficient of about 0.67 (D) All the above

Last Answer : Answer: Option D

Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a distillation column (C) Separation of components is not possible in liquid extraction, if selectivity is unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Description : Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a ... unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Last Answer : (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same (D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Description : Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence ... D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Last Answer : (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same

A steel bar 5 m × 50 mm is loaded with 250,000 N. If the modulus of elasticity of the material is 0.2 MN/mm2 and Poisson's ratio is 0.25, the change in the volume of the bar is: (A) 1.125 cm3 (B) 2.125 cm3 (C) 3.125 cm3 (D) 4.125 cm

Description : A steel bar 5 m × 50 mm is loaded with 250,000 N. If the modulus of elasticity of the material is 0.2  MN/mm2  and Poisson's ratio is 0.25, the change in the volume of the bar is:  (A) 1.125 cm3 (B) 2.125 cm3 (C) 3.125 cm3 (D) 4.125 cm

Last Answer : (C) 3.125 cm

Point out the wrong statement about the magnetic properties of soft iron and steel.

Description : Point out the wrong statement about the magnetic properties of soft iron and steel.

Last Answer : Point out the wrong statement about the magnetic properties of soft iron and steel. A. The ... to slag formation is minimised in open hearth process

Which of the following properties is not necessarily desirable in the material for transformer core? A. Mechanical strength B. Low hysteresis loss C. High thermal conductivity D. High permeability

Description : Which of the following properties is not necessarily desirable in the material for transformer core? A. Mechanical strength B. Low hysteresis loss C. High thermal conductivity D. High permeability

Last Answer : C) high thermal conductivity

A ferrite core has less eddy current loss than an iron core because ferrites have (A) High resistance. (B) Low resistance. (C) Low permeability. (D) High hysteresis.

Description : A ferrite core has less eddy current loss than an iron core because ferrites have (A) High resistance. (B) Low resistance. (C) Low permeability. (D) High hysteresis.

Last Answer : (A) High resistance.

If the area of hysteresis loop of a material is large, the hysteresis loss in this material will be?

Description : If the area of hysteresis loop of a material is large, the hysteresis loss in this material will be?

Last Answer : If the area of hysteresis loop of a material is large, the hysteresis loss in this material will be large.

Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point (C) Each ton of petroleum oil on distillation produces about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Description : Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches ... about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Last Answer : (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point

Alloys in which mercury is one of the metals are called (a) Amalgams (b) Emulsions (c) Mixtures (d) Solders

Description : Alloys in which mercury is one of the metals are called (a) Amalgams (b) Emulsions (c) Mixtures (d) Solders

Last Answer : Ans:(a)

The permeability of a dielectric material in air medium will be a) Absolute permeability b) Relative permeability c) Product of absolute and relative permeability d) Unity

Description : The permeability of a dielectric material in air medium will be a) Absolute permeability b) Relative permeability c) Product of absolute and relative permeability d) Unity

Last Answer : a) Absolute permeability

Pick out the wrong statement (A) Hardening makes the steel more brittle (B) High alloy steels contain more than 50% alloying element (C) 18/8 stainless steel is a magnetic steel (D) Both (B) and (C)

Description : Pick out the wrong statement (A) Hardening makes the steel more brittle (B) High alloy steels contain more than 50% alloying element (C) 18/8 stainless steel is a magnetic steel (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids (C) Particles movement from higher concentration to lower concentration takes place in diffusion process (D) According to Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Description : Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids ( ... Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Last Answer : (B) Molecular diffusion in solid is much faster than that in liquids

Pick out the wrong statement. (A) Yellow phosphorous which is the most reactive allotropic form of phosphorous is transported under water (B) Apatite is the principal material present in phosphate rock which is chemically Ca10 (PO4 )6 (F, Cl, OH) (C) Urea is more hygroscopic than ammonium nitrate (D) Nitrogen fixation means the process of bringing atmospheric nitrogen into combination i.e. into nitrogen compound fo

Description : Pick out the wrong statement. (A) Yellow phosphorous which is the most reactive allotropic form of phosphorous is transported under water (B) Apatite is the principal material present in ... fixation means the process of bringing atmospheric nitrogen into combination i.e. into nitrogen compound fo

Last Answer : (C) Urea is more hygroscopic than ammonium nitrate

Which method, vapor phase oxidation or direct-melt process, transforms deposited material into a solid glass preform by heating the porous material without melting?

Description : Which method, vapor phase oxidation or direct-melt process, transforms deposited material into a solid glass preform by heating the porous material without melting?

Last Answer : Vapor phase oxidation.

Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio (above the minimum reflux ratio), the fixed cost of the distillation column first increases and then decreases (C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Description : Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio ( ... (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Last Answer : C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux

Pick out the wrong statement. (A) Low intensity explosives are also called propellants, whereas high intensity explosive are called detonators (B) Gun powder comprises of 75% salt petre, 15% charcoal and 10% sulphur (C) Lead azide is a popular military explosive (D) TNT is a hygroscopic explosive having very high melting point and is non-toxic to human being

Description : Pick out the wrong statement. (A) Low intensity explosives are also called propellants, whereas high intensity explosive are called detonators (B) Gun powder comprises of 75% salt petre, 15% charcoal ... TNT is a hygroscopic explosive having very high melting point and is non-toxic to human being

Last Answer : (D) TNT is a hygroscopic explosive having very high melting point and is non-toxic to human being

Pick out the wrong statement: (A) Magnetic separation method can be employed to treat both dry & wet ores (B) Reduction ratio in crushing operation is defined as the ratio of minimum feed size to the maximum product size (C) Gyratory crusher is used for coarse crushing (D) Screens are of stationary, moving and vibratory types

Description : Pick out the wrong statement: (A) Magnetic separation method can be employed to treat both dry & wet ores (B) Reduction ratio in crushing operation is defined as the ratio of minimum feed ... ) Gyratory crusher is used for coarse crushing (D) Screens are of stationary, moving and vibratory types

Last Answer : (B) Reduction ratio in crushing operation is defined as the ratio of minimum feed size to the maximum product size

Pick out the correct statement. (A) Stainless steel is nothing but chromium coated steel (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal (C) Plastic deformation of a material is its temporary distortion under the action of applied stress (D) Rusting of iron is not electrochemical in nature

Description : Pick out the correct statement. (A) Stainless steel is nothing but chromium coated steel (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal (C) ... its temporary distortion under the action of applied stress (D) Rusting of iron is not electrochemical in nature

Last Answer : (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal

At equilibrium condition, the chemical potential of a material in different phases in contact with each other is equal. The chemical potential for a real gas (μ) is given by (where, μ = standard chemical potential at unit fugacity (f° = 1 atm.) and the gas behaves ideally.) (A) μ° + RT ln f (B) μ°+ R ln f (C) μ° + T ln f (D) μ° + R/T ln f

Description : At equilibrium condition, the chemical potential of a material in different phases in contact with each other is equal. The chemical potential for a real gas (μ) is given by (where, μ = standard chemical potential at unit fugacity (f° = 1 atm. ... (B) μ°+ R ln f (C) μ° + T ln f (D) μ° + R/T ln f

Last Answer : (A) μ° + RT ln f

The sugar industry is ideally suited for the cooperative sector. Why? -Geography

Description : The sugar industry is ideally suited for the cooperative sector. Why? -Geography

Last Answer : Sugarcane cultivation is seasonal hence the production too is seasonal. The farmers are engaged in the cultivation of the sugarcane, and when it is reaped, a cluster of farmers set up a ... together. Hence it is a cooperative sector. The cooperative formation has been successful in Maharashtra.

Which industry, due to its seasonal nature, is ideally suited to the cooperative sector? -SST 10th

Description : Which industry, due to its seasonal nature, is ideally suited to the cooperative sector? -SST 10th

Last Answer : This answer was deleted by our moderators...

Why is sugar industry ideally suited to the cooperative sector? -SST 10th

Description : Why is sugar industry ideally suited to the cooperative sector? -SST 10th

Last Answer : (i) The sugar industry is seasonal in nature and so is ideally suited to the cooperative sector. (ii) For entire year the farmers are engaged in producing sugarcane as it is an annual ... nature of the sugar industry is combated by setting up cooperative where farmers share the profits and losses.

Land plane is ideally suited for a) Land levelling b) Earth moving c) Final grading d) Top finishing

Description : Land plane is ideally suited for a) Land levelling b) Earth moving c) Final grading d) Top finishing

Last Answer : d) Top finishing

Land plane is ideally suited for: a. Land leveling b. Earth moving c. Final grading d. Top finishing

Description : Land plane is ideally suited for: a. Land leveling b. Earth moving c. Final grading d. Top finishing

Last Answer : d. Top finishing

Project management is ideally suited for a business environment requiring all of the following except _________. A. Flexibility B. Innovation C. speed D. Repetability

Description : Project management is ideally suited for a business environment requiring all of the following except _________. A. Flexibility B. Innovation C. speed D. Repetability

Last Answer : A. Flexibility

Division operation is ideally suited to handle queries of the type : (A) customers who have no account in any of the branches in Delhi. (B) customers who have an account at all branches in Delhi. (C) customers who have an account in atleast one branch in Delhi. (D) customers who have only joint account in any one branch in Delhi

Description : Division operation is ideally suited to handle queries of the type : (A) customers who have no account in any of the branches in Delhi. (B) customers who have an account at all branches in Delhi. ( ... atleast one branch in Delhi. (D) customers who have only joint account in any one branch in Delhi

Last Answer : (B) customers who have an account at all branches in Delhi. 

Which of the following relationships is correct for relating the three elastic constants of an isotropic elastic material (where, E = Young's modulus, G = Modulus of rigidity or shear modulus v = Poisson's ratio)? (A) E = 2G (1 + v) (B) E = G (1 + v) (C) E = G (1 + v)/2 (D) E = 2G (1 + 2v)

Description : Which of the following relationships is correct for relating the three elastic constants of an isotropic elastic material (where, E = Young's modulus, G = Modulus of rigidity or shear modulus v = Poisson's ratio)? (A) E = 2G (1 + v) (B) E = G (1 + v) (C) E = G (1 + v)/2 (D) E = 2G (1 + 2v)

Last Answer : (A) E = 2G (1 + v)

An elastic behaviour of materials is expressed in terms of (A) Hysteresis loop area (B) Stress-strain curve (C) Relaxation time

Description : An elastic behaviour of materials is expressed in terms of (A) Hysteresis loop area (B) Stress-strain curve (C) Relaxation time

Last Answer : (C) Relaxation time

Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter polymer melt to harden into filaments. Melt spinning is not used in case of the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Description : Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter ... the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Last Answer : (A) Acrylic

Pick out the wrong statement. (A) Enthalpies of all elements in their standard states are assumed to be zero (B) Combustion reactions are never endothermic in nature (C) Heat of reaction at constant volume is equal to the change in internal energy (D) Clausius-Clapeyron equation is not applicable to melting process

Description : Pick out the wrong statement. (A) Enthalpies of all elements in their standard states are assumed to be zero (B) Combustion reactions are never endothermic in nature (C) Heat of reaction ... to the change in internal energy (D) Clausius-Clapeyron equation is not applicable to melting process

Last Answer : (D) Clausius-Clapeyron equation is not applicable to melting process

Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile matter coals are more suitable for making pulverised fuel (C) Regulation of furnace temperature and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Description : Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile ... and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Last Answer : (D) None of these

Change in volume of metals from absolute zero temperature to their melting points is (A) Almost same for all metals (B) Different for different metals (C) Less for low melting point metals (D) Less for high melting point metals

Description : Change in volume of metals from absolute zero temperature to their melting points is (A) Almost same for all metals (B) Different for different metals (C) Less for low melting point metals (D) Less for high melting point metals

Last Answer : (A) Almost same for all metals

Pick out the wrong statement. (A) The mass diffusivity, the thermal diffusivity and the eddy momentum diffusivity are the same for NSc = NPr= 1 (B) 1 Nm3 of dry air is lighter than 1Nm3 of humid air (C) The Lewis number of a mixture is unity, when the thermal diffusivity is equal to the mass diffusivity

Description : Pick out the wrong statement. (A) The mass diffusivity, the thermal diffusivity and the eddy momentum diffusivity are the same for NSc = NPr= 1 (B) 1 Nm3 of dry air is lighter ... ) The Lewis number of a mixture is unity, when the thermal diffusivity is equal to the mass diffusivity

Last Answer : (B) 1 Nm3 of dry air is lighter than 1Nm3 of humid air

Paramagnetic materials have relative permeability (a) slightly less than unity (b) equal to unity (c) slightly more than unity (d) equal to that ferromagnetic mate rials

Description : Paramagnetic materials have relative permeability (a) slightly less than unity (b) equal to unity (c) slightly more than unity (d) equal to that ferromagnetic mate rials

Last Answer : (c) slightly more than unity

The relative permeability of a paramagnetic substance is (A) unity. (B) slightly more than unity. (C) zero. (D) less than unity.

Description : The relative permeability of a paramagnetic substance is (A) unity. (B) slightly more than unity. (C) zero. (D) less than unity.

Last Answer : (B) slightly more than unity.