Dielectric (A) Is an electrical insulating material (B) Of low resistivity is preferred (C) Should have high thermal conductivity (D) Need not defy the corrosive action of chemicals

Dielectric
(A) Is an electrical insulating material
(B) Of low resistivity is preferred
(C) Should have high thermal conductivity
(D) Need not defy the corrosive action of chemicals
by

1 Answer

Answer :

(A) Is an electrical insulating material
by

Related questions

The insulating material should have (a) low permittivity (b) high resistivity (c) high dielectric strength (d) all of the above

Description : The insulating material should have (a) low permittivity (b) high resistivity (c) high dielectric strength (d) all of the above

Last Answer : (d) all of the above

Gold and silver are (A) dielectric materials (B) low resistivity conducting materials. (C) magnetic materials. (D) insulating materials.

Description : Gold and silver are (A) dielectric materials (B) low resistivity conducting materials. (C) magnetic materials. (D) insulating materials.

Last Answer : (B) low resistivity conducting materials.

Low thermal conductivity of heat insulating materials is due to its (A) Dense structure (B) High proportion of air space (C) High specific heat (D) None of these

Description : Low thermal conductivity of heat insulating materials is due to its (A) Dense structure (B) High proportion of air space (C) High specific heat (D) None of these

Last Answer : (B) High proportion of air space

The critical radius of insulation for a spherical shell is (where, K = thermal conductivity of insulating material h0 = heat transfer coefficient at the outer surface) (A) K/h0 (B) 2K/h0 (C) h0 /K (D) h0 /2K

Description : The critical radius of insulation for a spherical shell is (where, K = thermal conductivity of insulating material h0 = heat transfer coefficient at the outer surface) (A) K/h0 (B) 2K/h0 (C) h0 /K (D) h0 /2K

Last Answer : (B) 2K/h0

Define dielectric failure of electrical insulating material.

Description : Define dielectric failure of electrical insulating material. 

Last Answer : Definition of dielectric failure of electrical insulating material. In the insulating material if the applied voltage is increased gradually then for certain value insulation will break down, ... material vanishes its insulating properties and starts conducting, also known as dielectric failure.

The insulating material for a cable should have (a) low cost (b) high dielectric strength (c) high mechanical strength (d) all of the above

Description : The insulating material for a cable should have (a) low cost (b) high dielectric strength (c) high mechanical strength (d) all of the above

Last Answer : (d) all of the above

The type of liquor circulation system to be ' employed in evaporators (viz. natural or forced circulation) is determined mainly by the __________ of the liquid. (A) Viscosity (B) Density (C) Thermal conductivity (D) Corrosive nature

Description : The type of liquor circulation system to be ' employed in evaporators (viz. natural or forced circulation) is determined mainly by the __________ of the liquid. (A) Viscosity (B) Density (C) Thermal conductivity (D) Corrosive nature

Last Answer : (A) Viscosity

The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2 . The temperature of the inside wall is - 5°C. The outside wall temperature is (A) 25°C (B) 30°C (C) 35°C (D) 40°C

Description : The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2 . The temperature of the inside wall is - 5°C. The outside wall temperature is (A) 25°C (B) 30°C (C) 35°C (D) 40°C

Last Answer : (C) 35°C

Coke oven regenerators are made of __________ bricks. (A) Fire clay (B) Silica (C) Low thermal conductivity (D) High electrical conductivity

Description : Coke oven regenerators are made of __________ bricks. (A) Fire clay (B) Silica (C) Low thermal conductivity (D) High electrical conductivity

Last Answer : (A) Fire clay

The electrical conductivity of a __________ decreases with rise in temperature. (A) Metal/alloy (B) Semi-conductor (C) Dielectric (D) None of these

Description : The electrical conductivity of a __________ decreases with rise in temperature. (A) Metal/alloy (B) Semi-conductor (C) Dielectric (D) None of these

Last Answer : (A) Metal/alloy

With increase in temperature, the electrical conductivity of a __________ decreases. (A) Semi-conductor (B) Metal or alloy (C) Dielectric (D) None of these

Description : With increase in temperature, the electrical conductivity of a __________ decreases. (A) Semi-conductor (B) Metal or alloy (C) Dielectric (D) None of these

Last Answer : (A) Semi-conductor

Copper has very low (A) Malleability (B) Ductility (C) Tensile strength (D) Thermal & electrical conductivity

Description : Copper has very low (A) Malleability (B) Ductility (C) Tensile strength (D) Thermal & electrical conductivity

Last Answer : (C) Tensile strength

Velocity of liquid hydrocarbon fuels in a pipeline cannot be measured by magnetic flow-meters, because their __________ is very low/small. (A) Thermal conductivity (B) Electrical conductivity (C) Specific gravity

Description : Velocity of liquid hydrocarbon fuels in a pipeline cannot be measured by magnetic flow-meters, because their __________ is very low/small. (A) Thermal conductivity (B) Electrical conductivity (C) Specific gravity

Last Answer : (C) Specific gravity

Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Description : Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Last Answer : (B) High vapour pressure

Mica is a (A) Dielectric material. (B) Insulating material. (C) Magnetic material. (D) Both insulating and dielectric material.

Description : Mica is a (A) Dielectric material. (B) Insulating material. (C) Magnetic material. (D) Both insulating and dielectric material.

Last Answer : (D) Both insulating and dielectric material.

State failure phenomena observed in insulating material. State four reasons for failure of gaseous and solid dielectric materials.

Description : State failure phenomena observed in insulating material. State four reasons for failure of gaseous and solid dielectric materials. 

Last Answer : Failure phenomena in insulating material means the dielectric property fails :  The dielectric failure mean the dielectric strength of insulating material reduces due to high voltages or high ... 6. Due to poor maintenance of insulating material there may be possibility dielectric failure 

What is dielectric strength of an insulating material? What is its unit?

Description : What is dielectric strength of an insulating material? What is its unit?

Last Answer : Dielectric Strength: The dielectric strength of an insulating material is the maximum voltage which the insulating medium can withstand without breakdown. Unit is volts per millimeter (V/mm), or kV/mm or kV/cm

For an insulating material, dielectric strength and dielectric loss should be respectively

Description : For an insulating material, dielectric strength and dielectric loss should be respectively   (A) high and high (B) low and high (C) high and low (D) low and low.

Last Answer : For an insulating material, dielectric strength and dielectric loss should be respectively  high and low 

ideal material for making cooking vessels should have (A) High heat capacity (B) Low heat capacity (C) High thermal conductivity (D) Both (B) and (C)

Description : ideal material for making cooking vessels should have (A) High heat capacity (B) Low heat capacity (C) High thermal conductivity (D) Both (B) and (C)

Last Answer : Option D

Which of the following criterion is used for any metal to be used as a cooking material? (1) More specific heat (2) More thermal conductivity (3) Less thermal conductivity (4) Less electrical conductivity

Description : Which of the following criterion is used for any metal to be used as a cooking material? (1) More specific heat (2) More thermal conductivity (3) Less thermal conductivity (4) Less electrical conductivity

Last Answer : (3) Less thermal conductivity Explanation: A metal to be used as a cooking material should have less thermal conductivity.

Which of the following criterion is used for any metal to be used as a cooking material ? (1) More specific heat (2) More thermal conductivity (3) Less thermal conductivity (4) Less electrical conductivity

Description : Which of the following criterion is used for any metal to be used as a cooking material ? (1) More specific heat (2) More thermal conductivity (3) Less thermal conductivity (4) Less electrical conductivity

Last Answer : Less thermal conductivity 

Which solid material has a high heat capacity but low thermal conductivity?

Description : Which solid material has a high heat capacity but low thermal conductivity?

Last Answer : https://en.wikipedia.org/wiki/Thermal_barrier_coating

Which of the following properties is not necessarily desirable in the material for transformer core? A. Mechanical strength B. Low hysteresis loss C. High thermal conductivity D. High permeability

Description : Which of the following properties is not necessarily desirable in the material for transformer core? A. Mechanical strength B. Low hysteresis loss C. High thermal conductivity D. High permeability

Last Answer : C) high thermal conductivity

State any two electrical, mechanical and thermal properties of insulating materials.

Description : State any two electrical, mechanical and thermal properties of insulating materials. 

Last Answer : i) Electrical Properties of insulating material:- 1. It should have high resistance. 2. It should have high breakdown voltage. 3. It should have high dielectric strength. 4. It should have low ... . 4. Ii should have thermal Stability. 5. Co-efficient of thermal expansion should be low.

Coke used for the production of calcium carbide should have (A) Low ash content (B) Low ignition temperature (C) High electrical resistivity (D) All (A), (B) and (C)

Description : Coke used for the production of calcium carbide should have (A) Low ash content (B) Low ignition temperature (C) High electrical resistivity (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In an amorphous material, atoms defy any definite atomic structure and exist in random pattern just like in liquid. Which of the following is an amorphous material? (A) Tin(B) Lead (C) Zinc (D) Glass

Description : In an amorphous material, atoms defy any definite atomic structure and exist in random pattern just like in liquid. Which of the following is an amorphous material? (A) Tin (B) Lead (C) Zinc (D) Glass

Last Answer : Option D

A steam pipe is intended to be insulated with two layers of insulating materials of different thermal conductivities. For minimum heat transfer to take place (A) The better insulation material should be put just next to pipe (i.e., inside) (B) The better insulating material should be put outside (C) Either of the insulating material could be put on either side (D) Steam temperature is considered before deciding as to which insulating material is to be put inside (i.e., just next to the pipe)

Description : A steam pipe is intended to be insulated with two layers of insulating materials of different thermal conductivities. For minimum heat transfer to take place (A) The better insulation material should be put just ... to which insulating material is to be put inside (i.e., just next to the pipe)

Last Answer : (A) The better insulation material should be put just next to pipe (i.e., inside)

Compute the conductivity when the current density is 12 units and the electric field is 20 units. Also identify the nature of the material. a) 1.67, dielectric b) 1.67, conductor c) 0.6, dielectric d) 0.6, conductor

Description : Compute the conductivity when the current density is 12 units and the electric field is 20 units. Also identify the nature of the material. a) 1.67, dielectric b) 1.67, conductor c) 0.6, dielectric d) 0.6, conductor

Last Answer : c) 0.6, dielectric

My windshield wipers seem to defy my every action. Can you help me?

Description : My windshield wipers seem to defy my every action. Can you help me?

Last Answer : It’s the spring that holds the wiper arm down.It’s weak.Yes,you heard it here first. ;)

(3) reflection of light due to the presence of free electrons Explanation: Lustre (or luster) is the way light interacts with the surface of a crystal, rock, or mineral. The word traces its origins back to the latin lux, meaning "light", and generally implies radiance, gloss, or brilliance. Metals in general have high electrical conductivity, high thermal conductivity, and high density. Typically they are malleable and ductile, deforming -under stress without cleaving.

Description : (3) reflection of light due to the presence of free electrons Explanation: Lustre (or luster) is the way light interacts with the surface of a crystal, rock, or mineral. The word ... conductivity, and high density. Typically they are malleable and ductile, deforming -under stress without cleaving.

Last Answer : Cloud is a colloidal dispersion of – (1) Air in a dispersion medium of water (2) Fog in a dispersion medium of water (3) Mist in a dispersion medium of air (4) Water drops in a dispersion medium of air

Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the possibility of tower wall collapse (B) Packed towers are preferred over plate towers for handling corrosive and foamy liquids (C) Diameter of randomly packed tower is normally more than 1.2 metres (D) Due to uneven supply and improper distribution of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Description : Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the ... of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Last Answer : (C) Diameter of randomly packed tower is normally more than 1.2 metres

Open pan evaporators are preferred to be used, when the solution to be concentrated is (A) Scaling (B) Highly viscous (C) Corrosive (D) Salty

Description : Open pan evaporators are preferred to be used, when the solution to be concentrated is (A) Scaling (B) Highly viscous (C) Corrosive (D) Salty

Last Answer : (B) Highly viscous

Pumping of a corrosive liquid is generally preferred to be done by a __________ pump, as it can be made of a variety of materials including plastics. (A) Piston (B) Gear (C) Positive displacement (D) Sump

Description : Pumping of a corrosive liquid is generally preferred to be done by a __________ pump, as it can be made of a variety of materials including plastics. (A) Piston (B) Gear (C) Positive displacement (D) Sump

Last Answer : (B) Gear

Psychrometry deals with the properties of gas-vapor mixture. Humidity can be determined by the measurement of the __________ of a fibre. (A) Electrical resistance (B) Thermal conductivity (C) Strength (D) None of these

Description : Psychrometry deals with the properties of gas-vapor mixture. Humidity can be determined by the measurement of the __________ of a fibre. (A) Electrical resistance (B) Thermal conductivity (C) Strength (D) None of these

Last Answer : (A) Electrical resistance

The ratio of thermal & electrical conductivity is same for all the metals at the same temperature; and at around room temperature, this ratio is proportional to(where, T = absolute temperature, °K) (A) T (B) 1/T (C) T2 (D) 1/T2

Description : The ratio of thermal & electrical conductivity is same for all the metals at the same temperature; and at around room temperature, this ratio is proportional to(where, T = absolute temperature, °K) (A) T (B) 1/T (C) T2 (D) 1/T2

Last Answer : A) T

Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a shell and tube heat exchanger (C) Steam jet ejector is used for vapor compression in a thermal recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Description : Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a ... recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Last Answer : (D) Heat sensitive materials should be concentrated in high pressure evaporators

Which of the listed conditions could indicate the need for cleaning electrical insulation? A. Low ambient temperature B. Low operating temperature C. High dielectric strength D. Low megger readings

Description : Which of the listed conditions could indicate the need for cleaning electrical insulation? A. Low ambient temperature B. Low operating temperature C. High dielectric strength D. Low megger readings

Last Answer : Answer: D

State various thermal insulating materials. State any two properties of insulating material

Description : State various thermal insulating materials. State any two properties of insulating material

Last Answer : Thermal insulating materials: 1) Asbestos 2) Aluminum Foil 3) Thermocol 4) Saw dust 5) Cork board slabs 6) Foam glass 7) Rock Wool 8) Glass Wool 9) ... . h) Presence of Moisture: with the increase in moisture content, the coefficient of thermal conductivity rises greatly

What is good dielectric break down value for insulating oil?

Description : What is good dielectric break down value for insulating oil?

Last Answer : 60 kV.

The breakdown of insulation of the cable can be avoided economically by the use of (a) inter-sheaths (b) insulating materials with different dielectric constants (c) both (a) and (b) (d) none of the above

Description : The breakdown of insulation of the cable can be avoided economically by the use of (a) inter-sheaths (b) insulating materials with different dielectric constants (c) both (a) and (b) (d) none of the above

Last Answer : (c) both (a) and (b)

Materials, which provide a path to the magnetic flux, are classified as (A) insulating materials. (B) semi conducting materials. (C) magnetic materials. (D) dielectric materials.

Description : Materials, which provide a path to the magnetic flux, are classified as (A) insulating materials. (B) semi conducting materials. (C) magnetic materials. (D) dielectric materials.

Last Answer : (C) magnetic materials.

Dielectric materials are (A) Insulating materials. (B) Semiconducting materials. (C) Magnetic materials. (D) Ferroelectric materials.

Description : Dielectric materials are (A) Insulating materials. (B) Semiconducting materials. (C) Magnetic materials. (D) Ferroelectric materials.

Last Answer : (A) Insulating materials.

A bearing metal should not have (A) Enough plasticity (B) Low thermal conductivity (C) Low co-efficient of friction (D) High toughness

Description : A bearing metal should not have (A) Enough plasticity (B) Low thermal conductivity (C) Low co-efficient of friction (D) High toughness

Last Answer : (B) Low thermal conductivity

Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Description : Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Last Answer : (C) High corrosion resistance

Among liquids, water has a comparatively high value of thermal conductivity, due to its (A) Low density (B) High viscosity (C) Partial ionisation (D) Dense structure

Description : Among liquids, water has a comparatively high value of thermal conductivity, due to its (A) Low density (B) High viscosity (C) Partial ionisation (D) Dense structure

Last Answer : (C) Partial ionisation

Thickness of stock does not affect the fuel economy of furnaces, if thematerial to be heated is of(A) Low emissivity(B) High thermal conductivity(C) Both (A) and (B)(D) Neither (A) nor (B)

Description : Thickness of stock does not affect the fuel economy of furnaces, if thematerial to be heated is of (A) Low emissivity (B) High thermal conductivity (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

ick out the undesirable property for a good refrigerant. (A) High thermal conductivity (B) Low freezing point (C) Large latent heat of vaporisation (D) High viscosity

Description : ick out the undesirable property for a good refrigerant. (A) High thermal conductivity (B) Low freezing point (C) Large latent heat of vaporisation (D) High viscosity

Last Answer : (D) High viscosity

Which of the following is an undesirable property of slag produced during the Pyrometallurgical method of metal extraction from its ore? (A) High fusibility & fluidity (B) High thermal conductivity (C) Low density (D) High chemical activity

Description : Which of the following is an undesirable property of slag produced during the Pyrometallurgical method of metal extraction from its ore? (A) High fusibility & fluidity (B) High thermal conductivity (C) Low density (D) High chemical activity

Last Answer : B) High thermal conductivity

An approximate estimation of total dissolved solids of a given water sample is often made by measuring (a) Electrical conductivity of the water sample (b) Electro-magnetic conductivity of the water sample (c) Sound conductivity of the water sample (d) Thermal conductivity of the water sample

Description : An approximate estimation of total dissolved solids of a given water sample is often made by measuring (a) Electrical conductivity of the water sample (b) Electro-magnetic conductivity of the water sample (c) Sound conductivity of the water sample (d) Thermal conductivity of the water sample

Last Answer : (a) Electrical conductivity of the water sample

Pick out the wrong statement. (A) Pure rubber is as useless as pure gold as a material of construction (B) Thermal conductivity of aluminium is higher than that of copper; henceit is increasingly used for utensil making(C) Copper has poor weldability(D) Reinforced plastics are made from both thermoplastic as well asthermosetting plastics

Description : Pick out the wrong statement. (A) Pure rubber is as useless as pure gold as a material of construction (B) Thermal conductivity of aluminium is higher than that of copper; henceit is ... has poor weldability (D) Reinforced plastics are made from both thermoplastic as well as thermosetting plastics

Last Answer : (B) Thermal conductivity of aluminium is higher than that of copper; henceit is increasingly used for utensil making