The temperature at which ferromagnetic material can no longer be magnetised by the outside forces, is termed as the (A) Critical point (B) Curie temperature (C) Inversion temperature (D) Eutectic temperature

The temperature at which ferromagnetic material can no longer be magnetised by the outside forces, is termed as the
(A) Critical point
(B) Curie temperature
(C) Inversion temperature
(D) Eutectic temperature
by

1 Answer

Answer :

(B) Curie temperature
by

Related questions

Pick out the wrong statement. (A) A ferromagnetic material becomes paramagnetic above the 'Curie temperature' (B) Permanent magnets are made of hard materials, whereas electromagnets require soft magnetic materials (C) Soft magnetic materials (e.g., pure iron) have higher permeability and low hysterisis loss and coercive forces (D) Tungsten steel and alnico are not hard magnetic materials

Description : Pick out the wrong statement. (A) A ferromagnetic material becomes paramagnetic above the 'Curie temperature' (B) Permanent magnets are made of hard materials, whereas electromagnets require soft ... hysterisis loss and coercive forces (D) Tungsten steel and alnico are not hard magnetic materials

Last Answer : Option D

The critical temperature above which the ferromagnetic materials loose their magnetic property is known as (A) hysterisis. (B) Curie point. (C) transition temperature. (D) standard temperature.

Description : The critical temperature above which the ferromagnetic materials loose their magnetic property is known as (A) hysterisis. (B) Curie point. (C) transition temperature. (D) standard temperature.

Last Answer : (B) Curie point

The transition temperature at which all the ferromagnetic materials become paramagnetic materials is termed as the 'Curie temperature'. Its value for cobalt is __________ °C. (A) 768 (B) 1127 (C) 1359 (D) 1480

Description : The transition temperature at which all the ferromagnetic materials become paramagnetic materials is termed as the 'Curie temperature'. Its value for cobalt is __________ °C. (A) 768 (B) 1127 (C) 1359 (D) 1480

Last Answer : (B) 1127

Which of the following is NOT closely associated with a non-magnetic Phase Diagram? w) Eutectic Temperature (pron: you-tek-tik) x) Curie Point y) Solidus z) Liquidus Curves

Description : Which of the following is NOT closely associated with a non-magnetic Phase Diagram? w) Eutectic Temperature (pron: you-tek-tik) x) Curie Point y) Solidus z) Liquidus Curves

Last Answer : ANSWER: X -- CURIE POINT

A magnetic material becomes __________ above the Curie temperature. (A) Ferromagnetic (B) Diamagnetic (C) Paramagnetic (D) None of these

Description : A magnetic material becomes __________ above the Curie temperature. (A) Ferromagnetic (B) Diamagnetic (C) Paramagnetic (D) None of these

Last Answer : (C) Paramagnetic

Pure nickel is (A) Ferromagnetic above its curie point (i.e., 415°C)(B) Having h.c.p. crystal lattice(C) Ferromagnetic at room temperature(D) Not resistant to oxidation at high temperature

Description : Pure nickel is (A) Ferromagnetic above its curie point (i.e., 415°C) (B) Having h.c.p. crystal lattice (C) Ferromagnetic at room temperature (D) Not resistant to oxidation at high temperature

Last Answer : (C) Ferromagnetic at room temperature

If a ferromagnetic material is heated upto Curie temperature, it becomes

Description : If a ferromagnetic material is heated upto Curie temperature, it becomes (a) Permanent magnet (b) Anti-ferromagnetic material (c) Diamagnetic material (d) Paramagnetic material 

Last Answer : Paramagnetic material

When the temperature of a ferromagnetic material exceeds the Curie temperature, it behaves similar to a

Description : When the temperature of a ferromagnetic material exceeds the Curie temperature, it behaves similar to a 

Last Answer : When the temperature of a ferromagnetic material exceeds the Curie temperature, it behaves similar to a Diamagnetic material

Heating of ferromagnetic materials to a temperature above Curie temperature makes it (A) Insulator for heat & electricity transmission (B) Ferritic (C) Behave like paramagnetic materials (D) Superconductor

Description : Heating of ferromagnetic materials to a temperature above Curie temperature makes it (A) Insulator for heat & electricity transmission (B) Ferritic (C) Behave like paramagnetic materials (D) Superconductor

Last Answer : Option C

The temperature at which new grains are formed in the metal is called the __________ temperature. (A) Eutectic (B) Recrystallisation (C) Upper critical (D) Lower critical

Description : The temperature at which new grains are formed in the metal is called the __________ temperature. (A) Eutectic (B) Recrystallisation (C) Upper critical (D) Lower critical

Last Answer : (B) Recrystallisation

Which of the following terminology is used for the temperature at which new grains are formed in a metal? (A) Eutectic temperature (B) Lower critical temperature (C) Recrystallisation temperature (D) Upper critical temperature

Description : Which of the following terminology is used for the temperature at which new grains are formed in a metal? (A) Eutectic temperature (B) Lower critical temperature (C) Recrystallisation temperature (D) Upper critical temperature

Last Answer : Recrystallisation temperature

At __________ point, all the three phases (i.e. solid, liquid and gas) co exist. (A) Eutectic (B) Triple (C) Plait (D) Critical

Description : At __________ point, all the three phases (i.e. solid, liquid and gas) co exist. (A) Eutectic (B) Triple (C) Plait (D) Critical

Last Answer : (B) Triple

The temperature at which a real gas obeys the ideal gas laws over a wide range of pressure is called __________ temperature. (A) Boyle (B) Inversion (C) Critical (D) Reduced

Description : The temperature at which a real gas obeys the ideal gas laws over a wide range of pressure is called __________ temperature. (A) Boyle (B) Inversion (C) Critical (D) Reduced

Last Answer : (A) Boyle

The temperature at which a real gas obeys the ideal gas laws over a wide range of pressure is called the __________ temperature. (A) Critical (B) Boyle (C) Inversion (D) Reduced

Description : The temperature at which a real gas obeys the ideal gas laws over a wide range of pressure is called the __________ temperature. (A) Critical (B) Boyle (C) Inversion (D) Reduced

Last Answer : (B) Boyle

The temperature at the eutectic point of the system is the __________ temperature that can be attained in the system. (A) Lowest (B) Highest (C) Average (D) None of these

Description : The temperature at the eutectic point of the system is the __________ temperature that can be attained in the system. (A) Lowest (B) Highest (C) Average (D) None of these

Last Answer : (A) Lowest

Find the susceptibility when the curie constant is 0.2 and the difference in critical temperature and paramagnetic curie temperature is 0.01. a) 2 b) 20 c) 0.02 d) 200

Description : Find the susceptibility when the curie constant is 0.2 and the difference in critical temperature and paramagnetic curie temperature is 0.01. a) 2 b) 20 c) 0.02 d) 200

Last Answer : b) 20

Which of the following is not used as a medium for high temperature heating ? (A) Dowtherm (B) Mercury (C) Liquid metal (e.g. molten sodium) (D) Fused salts (e.g., an eutectic mixture of 53% KNO3 , 40% NaNO2and 7% NaNO3 )

Description : Which of the following is not used as a medium for high temperature heating ? (A) Dowtherm (B) Mercury (C) Liquid metal (e.g. molten sodium) (D) Fused salts (e.g., an eutectic mixture of 53% KNO3 , 40% NaNO2and 7% NaNO3 )

Last Answer : (B) Mercury

Eutectic reaction for iron-carbon system occurs at a temperature of __________ °C. (A) 723(B) 959 (C) 1147 (D) 1493

Description : Eutectic reaction for iron-carbon system occurs at a temperature of __________ °C. (A) 723 (B) 959 (C) 1147 (D) 1493

Last Answer : Option A

Which of the following is used as base material in Stereolithography (SLA) process? a.Thermoplastics , Metals powders b.Thermoplastics , Eutectic metals. c.Titanium alloys d.Photopolymer

Description : Which of the following is used as base material in Stereolithography (SLA) process? a.Thermoplastics , Metals powders b.Thermoplastics , Eutectic metals. c.Titanium alloys d.Photopolymer

Last Answer : d.Photopolymer

The magnetic field which destroys the superconductivity is called a) Diamagnetic field b) Ferromagnetic field c) Ferrimagnetic field d) Critical field

Description : The magnetic field which destroys the superconductivity is called a) Diamagnetic field b) Ferromagnetic field c) Ferrimagnetic field d) Critical field

Last Answer : d) Critical field

Diamagnetic materials are magnetised (A) Strongly (B) Only slightly (C) With eddy currents only (D) In a direction opposite to that of the applied field

Description : Diamagnetic materials are magnetised (A) Strongly (B) Only slightly (C) With eddy currents only (D) In a direction opposite to that of the applied field

Last Answer : (D) In a direction opposite to that of the applied field

Diamagnetic materials (A) Are magnetised by eddy currents only (B) Are non-magnetic and cannot be magnetised (C) Are magnetised in direction opposite to the magnetic field (D) Can be magnetised in one direction only

Description : Diamagnetic materials (A) Are magnetised by eddy currents only (B) Are non-magnetic and cannot be magnetised (C) Are magnetised in direction opposite to the magnetic field (D) Can be magnetised in one direction only

Last Answer : (C) Are magnetised in direction opposite to the magnetic field

Nickel as a material of construction (A) Is used as an alloying element for both ferrous & non-ferrous alloys (B) Is paramagnetic below 415° C (its Curie temperature) (C) Diamagnetic (D) Has a body centred cubic (bcc) crystal lattice structure

Description : Nickel as a material of construction (A) Is used as an alloying element for both ferrous & non-ferrous alloys (B) Is paramagnetic below 415° C (its Curie temperature) (C) Diamagnetic (D) Has a body centred cubic (bcc) crystal lattice structure

Last Answer : (A) Is used as an alloying element for both ferrous & non-ferrous alloys

Which of the following input device is used in Banks to read magnetised characters on a Cheque? A. OCR B. MICR C. Bar Code reader D. Magnetic Stripe reader

Description : Which of the following input device is used in Banks to read magnetised characters on a Cheque? A. OCR B. MICR C. Bar Code reader D. Magnetic Stripe reader

Last Answer : B. MICR

In the process of magnetisation of a bar (1) The entire bulk of the bar gets magnetised (2) Only the surface of the bar gets magnetised (3) Only the ends of the bar get magnetised (4) Only some parts of the outer layers of the bar get magnetised

Description : In the process of magnetisation of a bar (1) The entire bulk of the bar gets magnetised (2) Only the surface of the bar gets magnetised (3) Only the ends of the bar get magnetised (4) Only some parts of the outer layers of the bar get magnetised

Last Answer : The entire bulk of the bar gets magnetised

Nickel is a __________ material. (A) Ferromagnetic (B) Diamagnetic (C) Paramagnetic (D) None of these

Description : Nickel is a __________ material. (A) Ferromagnetic (B) Diamagnetic (C) Paramagnetic (D) None of these

Last Answer : (A) Ferromagnetic

Nickel is a __________ material. (A) Ferromagnetic (B) Semi-conductor (C) Paramagnetic (D) Ferroelectric

Description : Nickel is a __________ material. (A) Ferromagnetic (B) Semi-conductor (C) Paramagnetic (D) Ferroelectric

Last Answer : (A) Ferromagnetic

Quartz is a __________ material. (A) Diamagnetic (B) Ferromagnetic (C) Ferroelectric (D) Piezoelectric

Description : Quartz is a __________ material. (A) Diamagnetic (B) Ferromagnetic (C) Ferroelectric (D) Piezoelectric

Last Answer : Option D

Which of the following is not a ferromagnetic material? (A) Nickel (B) Cobalt (C) Alumini

Description : Which of the following is not a ferromagnetic material? (A) Nickel (B) Cobalt (C) Alumini

Last Answer : Option C

The temperature at which the magnetic property of iron disappears (i.e., it becomes non-magnetic) and its electrical conductivity & specific heat also changes, is called the 'Curie point', which is __________ °C. (A) 768 (B) 908 (C) 1400 (D) 1539

Description : The temperature at which the magnetic property of iron disappears (i.e., it becomes non-magnetic) and its electrical conductivity & specific heat also changes, is called the 'Curie point', which is __________ °C. (A) 768 (B) 908 (C) 1400 (D) 1539

Last Answer : Option A

A small hole in the window of a closed room forms an inverted image of outside building on the opposite wall of the room. This happens because (a) the rays of light suffer lateral inversion on entering the hole (b) of the rectilinear propagation of light (c) the hole acts as a convex lens (d) the hole acts as a prism

Description : A small hole in the window of a closed room forms an inverted image of outside building on the opposite wall of the room. This happens because (a) the rays of light suffer lateral inversion on entering the ... propagation of light (c) the hole acts as a convex lens (d) the hole acts as a prism

Last Answer : Ans:(b)

an eutectic system, two elements are completely (A) Soluble in solid state (B) Insoluble in liquid state (C) Insoluble in both solid & liquid state (D) Soluble in liquid state

Description : an eutectic system, two elements are completely (A) Soluble in solid state (B) Insoluble in liquid state (C) Insoluble in both solid & liquid state (D) Soluble in liquid state

Last Answer : Option D

All gases above its inversion temperature, in a throttling process will show (A) A heating effect (B) No change in temperature (C) A cooling effect (D) Either (A) or (C)

Description : All gases above its inversion temperature, in a throttling process will show (A) A heating effect (B) No change in temperature (C) A cooling effect (D) Either (A) or (C)

Last Answer : (A) A heating effect

____ is a weather-based indicator for assessing crop development [a] Growing Degree Days [b] Thermal Death Point [c] Sun Clad [d] Heat Units [e] Temperature Inversion

Description : ____ is a weather-based indicator for assessing crop development [a] Growing Degree Days [b] Thermal Death Point [c] Sun Clad [d] Heat Units [e] Temperature Inversion

Last Answer : [c] Sun Clad

Which of the following is a ferromagnetic material ? A. Tungsten B. Aluminium C. Copper D. Nickel (Answer)

Description : Which of the following is a ferromagnetic material ? A. Tungsten B. Aluminium C. Copper D. Nickel (Answer)

Last Answer : D. Nickel (Answer)

Which of the following is a ferromagnetic material ? (a) Tungsten (b) Aluminium (c) Copper (d) Nickel

Description : Which of the following is a ferromagnetic material ? (a) Tungsten (b) Aluminium (c) Copper (d) Nickel

Last Answer : (d) Nickel

A material which is slightly repelled by a magnetic field is known as (a) ferromagnetic material (b) diamagnetic material (c) paramagnetic material (d) conducting material

Description : A material which is slightly repelled by a magnetic field is known as (a) ferromagnetic material (b) diamagnetic material (c) paramagnetic material (d) conducting material

Last Answer : (b) diamagnetic material

In a ferromagnetic material the state of flux density is as follows when external magnetic field is applied to it. (A) Increased (B) Decreased (C) Remains unchanged (D) Becomes zero

Description : In a ferromagnetic material the state of flux density is as follows when external magnetic field is applied to it. (A) Increased (B) Decreased (C) Remains unchanged (D) Becomes zero

Last Answer : (C) Remains unchanged

Ferrites are (A) ferromagnetic material. (B) ferrimagnetic materials. (C) anti ferromagnetic material. (D) diamagnetic materials.

Description : Ferrites are (A) ferromagnetic material. (B) ferrimagnetic materials. (C) anti ferromagnetic material. (D) diamagnetic materials.

Last Answer : (A) ferromagnetic material.

Iron is what type of magnetic material? Is it: w) diamagnetic x) paramagnetic y) ferromagnetic z) non-magnetic

Description : Iron is what type of magnetic material? Is it: w) diamagnetic x) paramagnetic y) ferromagnetic z) non-magnetic

Last Answer : ANSWER: Y -- FERROMAGNETIC 

State any two applications of: (i) Ferromagnetic (ii) Paramagnetic material.

Description : State any two applications of: (i) Ferromagnetic (ii) Paramagnetic material. 

Last Answer : Applications of Ferromagnetic Materials:  1. In the transformer laminations. 2. In Electrical machines as a magnetic material. 3. In Magnetic poles of motor and generator 4. Magnetic ... : 1. Solid state MASER  2. Using adiabatic demagnetization low temperature can be achieved. 

The relative permeability of a ferromagnetic material is?

Description : The relative permeability of a ferromagnetic material is?

Last Answer : The relative permeability of a ferromagnetic material is more than 100 or 1000.

Curie point is the temperature at which (1) Matter becomes radioactive (2) A metal loses magnetic properties (3) A metal loses conductivity (4) Transmutation of metal occurs

Description : Curie point is the temperature at which (1) Matter becomes radioactive (2) A metal loses magnetic properties (3) A metal loses conductivity (4) Transmutation of metal occurs

Last Answer : (2) A metal loses magnetic properties Explanation: In physics and materials science, the Curie temperature (TO, or Curie point, is the temperature at which a ferromagnetic or a ... in piezoelectric materials to refer to the temperature at which spontaneous polarization is lost on heating.

Curie point is the temperature at which (1) Matter becomes radioactive (2) A metal loses magnetic properties. (3) A metal loses conductivity (4) Transmutation of metal occurs.

Description : Curie point is the temperature at which (1) Matter becomes radioactive (2) A metal loses magnetic properties. (3) A metal loses conductivity (4) Transmutation of metal occurs.

Last Answer : A metal loses magnetic properties.

What is eutectic ?

Description : What is eutectic ?

Last Answer : Eutectic Greek word. The word eutectic means Easy Melting . Eutectic is an alloy in an alloy series that freezes and melts at a certain temperature, and the two metals in the internal structure are stratified in a stratified form. That is, it does not dissolve under difficult conditions.

Explain the terms solid solution, eutectic, eutectoid and peritectic.

Description : Explain the terms solid solution, eutectic, eutectoid and peritectic.

Last Answer : Solid Solution. When a homogeneous mixture of two (or more) atomic forms exists in solid state, it is known as solid solution. Eutectic. A mixture of two (or more) phases which solidify ... a different and new solid phase. This three phase transformation occurs at a point called peritectic point.

Gases are cooled in Joule-Thomson expansion, when it is __________ inversion temperature. (A) Below (B) At (C) Above (D) Either 'b' or 'c'

Description : Gases are cooled in Joule-Thomson expansion, when it is __________ inversion temperature. (A) Below (B) At (C) Above (D) Either 'b' or 'c'

Last Answer : A) Below

Joule-Thomson co-efficient which is defined as, η = (∂T/∂P)H = 1/Cp (∂H/∂T)P, changes sign at a temperature known as inversion temperature. The value of Joule-Thomson co-efficient at inversion temperature is (A) 0 (B) ∞ (C) +ve (D) -ve

Description : Joule-Thomson co-efficient which is defined as, η = (∂T/∂P)H = 1/Cp (∂H/∂T)P, changes sign at a temperature known as inversion temperature. The value of Joule-Thomson co-efficient at inversion temperature is (A) 0 (B) ∞ (C) +ve (D) -ve

Last Answer : (A) 0

Which one is true for a throttling process? (A) A gas may have more than one inversion temperatures (B) The inversion temperature is different for different gases (C) The inversion temperature is same for all gases (D) The inversion temperature is the temperature at which Joule-Thomson co-efficient is infinity

Description : Which one is true for a throttling process? (A) A gas may have more than one inversion temperatures (B) The inversion temperature is different for different gases (C) The inversion ... gases (D) The inversion temperature is the temperature at which Joule-Thomson co-efficient is infinity

Last Answer : (B) The inversion temperature is different for different gases

The Joule-Thomson co-efficient is defined as (∂T/∂P)H. Its value at the inversion point is (A) ∞ (B) 1 (C) 0 (D) -ve

Description : The Joule-Thomson co-efficient is defined as (∂T/∂P)H. Its value at the inversion point is (A) ∞ (B) 1 (C) 0 (D) -ve

Last Answer : (C) 0