Draw and explain RC phase shift Oscillator.

Draw and explain RC phase shift Oscillator.
by

2 Answers

Answer :

Circuit Diagram:

image

Explanation: Here the collector resistor RC limits the collector current of the transistor, resistors R1 and R2 form the voltage divider network while the emitter resistor RE improves the stability. Next, the capacitors CE and Co are the emitter by-pass capacitor and the output DC decoupling capacitor, respectively. Further, the circuit also shows three RC networks employed in the feedback path. This RC networks causes the output waveform to shift by 180° during its course of travel from output terminal to the base of the transistor. Next, this signal will be shifted again by 180° by the transistor in the circuit due to the fact that the phase-difference between the input and the output will be 180° in the case of common emitter configuration. This makes the net phase-difference to be 360°, satisfying the phase-difference condition.

by

Answer :

Circuit diagram of RC phase shift oscillator:

image

WORKING: * Circuit consists of a single stage amplifier in common emitter configuration & RC phase shifting network. * R1, R2, RE provides biasing & CE is bypass capacitor. * Common emitter amplifier introduces a 1800 phase shift between input & output. & remaining 1800 phase shift is produced by three identical basic RC phase shifting networks. * Each RC network is designed to introduce a phase shift of 600 . * The phase shift around the loop is 3600 only at one precise frequency.


image  

by

Related questions

In an R-C phase shift oscillator, the minimum no. of R-C networks to be connected in cascade will be -

Description : In an R-C phase shift oscillator, the minimum no. of R-C networks to be connected in cascade will be -

Last Answer : In an R-C phase shift oscillator, the minimum no. of R-C networks to be connected in cascade will be 3

Oscillator independent of phase shift is

Description : Oscillator independent of phase shift is  (1) Relaxation (2) Wein bridge (3) Clapp (4) All of these

Last Answer : Oscillator independent of phase shift is Relaxation 

Draw & explain operation of phase detector.

Description : Draw & explain operation of phase detector.

Last Answer : In phase detector, the op-Amp basically acts as a zero crossing detector. If a sine wave is applied at the i/p, we get square wave at the op-Amp o/p (at point ... to two channel of the CRO. The time duration between the pulses corresponding to voltages represent the phase between them. 

Compare RC and LC oscillator.

Description : Compare RC and LC oscillator.

Last Answer :  RC and LC oscillator

Draw symbol of LED and explain it’s working principle.

Description : Draw symbol of LED and explain it’s working principle.

Last Answer : Construction of LED: The basic structure of LED is shown in fig.(a). The active region exists between the p and n regions. The light emerges from the active side in all the directions when electron hole-pairs ... fig.(c). In this way an LED emits light. This is the principle of operation of LED.

Draw and explain V and inverted V curves for synchronous motor.

Description : Draw and explain V and inverted V curves for synchronous motor.

Last Answer : V curves' and inverted V curves' for Synchronous Motor:  V curve:  V curve is a plot of the stator current versus field current for different constant loads. The graph is plotted ... Vcurves of synchronous motor. The highest point on each of these curves indicates unity power factor.

Draw the block diagram of regulated power supply, explain function of each block and draw waveforms of each stage.

Description : Draw the block diagram of regulated power supply, explain function of each block and draw waveforms of each stage.

Last Answer : 1. A step down transformer 2. A rectifier 3. A filter 4. A regulator Operation of Regulated Power Supply:- Step Down Transformer:- A step down transformer will ... regulator. A regulator will maintain the output constant even when changes at the input or any other changes occur.

Draw & explain touch plate switch using IC555.

Description : Draw & explain touch plate switch using IC555.

Last Answer : It is construct form monostable multivibrator , when metal plates touch by finger then voltage at pin number 2 goes to below 1/3 Vcc then output of lower comparator becomes high hence flip flop set and ... then output of timer goes low and it low till up to the metal plates touch by finger .

Draw block diagram of PLL as a FM demodulator. Explain function of each block.

Description : Draw block diagram of PLL as a FM demodulator. Explain function of each block.

Last Answer : Operation:  The FM signal which is to be demodulated is applied at the input of the PLL.  the PLL is locked to the FM  The error voltage produced at ... using PLL ensures a high Linearity, between the instantaneous input frequency and VCO control voltage (error amplifier output)

Explain MCB and ELCB with connection diagram supplying single phase load.

Description : Explain MCB and ELCB with connection diagram supplying single phase load. 

Last Answer : OR OR Explanation: * MCB provides short circuit protection. * MCB provides overload protection * ELCB provides earth fault protection. * MCB is in series with ... occurs, the ELCB cuts off the power within the time of 0.1 sec. automatically to protect the personnel. 

List different starting methods of three phase synchronous motor. Explain any one of them.

Description : List different starting methods of three phase synchronous motor. Explain any one of them.

Last Answer : Different Starting Methods of Three Phase Synchronous Motor: As synchronous motor is not self starting, different methods of starting are as follows: 1) By using an Induction (Pony) motor 2) ... . The rotor gets pulled into synchronism and starts running at constant speed as a synchronous motor. 

Explain the concept of lagging and leading phase angle by waveform.

Description : Explain the concept of lagging and leading phase angle by waveform.

Last Answer : i) Leading phase angle :  When two ac quantities of same frequency do not attain their respective zero or peak values simultaneously, then the quantities are said to be out-of-phase quantities. The ... Similarly, in the second diagram, the voltage is said to be lagging the current by  Φ.

Explain three phase half wave controller or three phase unidirectional controller.

Description : Explain three phase half wave controller or three phase unidirectional controller.

Last Answer : Three phase half wave controller or unidirectional controller:

Explain three phase full wave controller.

Description : Explain three phase full wave controller.

Last Answer : Three phase full wave controller: Three phase full wave controller is also called as the three-phase bidirectional controller. Let the load is star connected so at each phase there are antiparallel connected SCRs. ... conduct at the same time and the third phase will be open.

Draw the circuit diagram of crystal oscillator and explain its working.

Description : Draw the circuit diagram of crystal oscillator and explain its working.

Last Answer : To excite a crystal for operation in the series-resonant mode it may be connected as a series element in a feedback path, the crystal impedance is the smallest and the amount of positive feedback is the largest. ... which is good.  The resonant frequency is given as  Fo = 1/( 2 π √LC ) 

Draw and explain Hartley Oscillator circuit diagram.

Description : Draw and explain Hartley Oscillator circuit diagram.

Last Answer : Function of each component: 1. An NPN transistor connected in a common emitter configuration works as the active device in amplifier stage and CE configuration provides 180°phase shift. 2. R1 and R2 ... circuit to the base-emitter circuit.  The frequency of oscillation is given as-  

Compare amplifier and oscillator.

Description : Compare amplifier and oscillator.

Last Answer : Figure shows a block diagram of an amplifier and an oscillator.   An amplifier is a device, which produces an output signal with similar waveform as that of the input. ... is supplied. An oscillator does not require any external signal to start or maintain energy conversion process.

crystal oscillator and its applications.

Description : crystal oscillator and its applications.

Last Answer : Need: Any circuit that generates an alternating voltage is called an oscillator. To generate ac Voltage, it takes energy from the dc source. 1. In some applications voltages of low frequency are required where ... generate clock in digital systems.  It is used as sweep circuits in TV and CRO.

List two types of oscillator, which generates frequency in RF range.

Description : List two types of oscillator, which generates frequency in RF range.

Last Answer : Types of Oscillators generating frequencies in RF range: i) Hartley Oscillator ii) Colpitt’s Oscillator iii) Clapp Oscillator

In a 4-pole wave winding connected dc motor, the cross-magnetizing AT/pole for a brush shift of θ radians

Description : In a 4-pole wave winding connected dc motor, the cross-magnetizing AT/pole for a brush shift of θ radians (A) Armature amp-conductors × (θ/360o) (B) Armature amp-turns × (θ/360o) (C) Armature amp-conductors × (1/4 - θ/360o) (D) Armature amp-conductors × (1/8 - θ/360o)

Last Answer : In a 4-pole wave winding connected dc motor, the cross-magnetizing AT/pole for a brush shift of θ radians Armature amp-conductors × (1/8 - θ/360o)

Is this oscillator adjustable with a screwdriver, and where is the link to prchase it?

Description : Is this oscillator adjustable with a screwdriver, and where is the link to prchase it?

Last Answer : answer:@XOIIO Probably a question you should direct to the company. The link below should help. http://www.vectron.com/contact/index.htm

Describe triggering of SCR using UJT relaxation oscillator.

Description : Describe triggering of SCR using UJT relaxation oscillator. 

Last Answer : I need it's operation

Which of the following is a negative-resistance microwave device for oscillator applications?

Description :  Which of the following is a negative-resistance microwave device for oscillator applications? A) IMPATT Diode B) Gunn Diode C) Snap diode D) Schottky Diode 

Last Answer :  Which of the following is a negative-resistance microwave device for oscillator applications? A) IMPATT Diode B) Gunn Diode C) Snap diode D) Schottky Diode 

A Hartley Oscillator is used for generating

Description : A Hartley Oscillator is used for generating (A) very low frequency Oscillation (B) radio-frequency Oscillation (C) microwave Oscillation (D) audio-frequency Oscillation

Last Answer : A Hartley Oscillator is used for generating radio-frequency Oscillation

Do you hold shift when you type in ALL CAPS or do you use caps lock?

Description : Do you hold shift when you type in ALL CAPS or do you use caps lock?

Last Answer : Yes.

How to Shift Gears in a Car ?

Description : How to Shift Gears in a Car ?

Last Answer : How to Shift Gears in a Car Driving a shift stick offers many benefits especially for drivers who don't like monotony on the road. First-timers are recommended to practice driving using a shift stick ... If you enjoy learning this article, you'll surely be delighted in reading how to learn driving.

How to Survive Working Night Shift ?

Description : How to Survive Working Night Shift ?

Last Answer : How to Survive Working Night Shift Very early in our lives, we have been trained to follow a certain routine. We wake up in the morning, do our tasks for the day and sleep at night. Working on ... 're on the graveyard shift. For more information regarding this article, read how to stay up all night.

Shift Register

Description : Shift Register

Last Answer : Shift Register:- Shift Register is a group of flipflops used to shift data from one side to other side or to convert serial data into parallel or vice versa. Shift registers are of following types  i) ... iii) Parallel in serial out(PISO) iv) Parallel in parallel out(PIPO)

applications of RC coupled amplifier

Description :  applications of RC coupled amplifier

Last Answer : Applications of RC coupled amplifier: (i) Widely used as Voltage amplifiers. (ii) They are used in Public Address System. (iii) In Tape recorders. (iv) In stereo amplifiers (v) In T.V. V.C.R. and C.D. Players.

Series rc circuits

Description : Series rc circuits

Last Answer : Series rc circuits

Parallel rc circuit

Description : Parallel rc circuit

Last Answer : Parallel rc circuit

Source free RC circuit 2

Description : Source free RC circuit 2

Last Answer : Source free RC circuit 2

Source free RC circuit 3

Description : Source free RC circuit 3

Last Answer : Source free RC circuit 3

Source free RC circuit 4

Description : Source free RC circuit 4

Last Answer : Source free RC circuit 4

Source free RC circuit 5

Description : Source free RC circuit 5

Last Answer : Source free RC circuit 5

Source free RC circuit 6

Description : Source free RC circuit 6

Last Answer : Source free RC circuit 6

Source free RC circuit 7

Description : Source free RC circuit 7

Last Answer : Source free RC circuit 7

Source free RC circuit 8

Description : Source free RC circuit 8

Last Answer : Source free RC circuit 8

Compare RC coupled, transformer coupled and direct coupled amplifier based on four points.

Description : Compare RC coupled, transformer coupled and direct coupled amplifier based on four points.

Last Answer : Parameter RC coupled Transformer coupled Direct coupled  Coupling element Resistor and capacitor Transformer No element Impedance matching Poor Excellent good Frequency ... Low frequency amplifier,opamp Size and cost small Large and bulky least

Compare RC and LC filter.

Description : Compare RC and LC filter.

Last Answer : RC filters  LC filters The RC filter is only useful for small load currents. The LC filters are useful for heavy load currents. More power dissipated in RC filter. Less power ... RC is fine for filtering low power signals. LC is fine for filtering high power signals.

List the advantages of RC coupled amplifier.

Description : List the advantages of RC coupled amplifier.

Last Answer : Advantages: 1. The frequency response is excellent 2. The circuit is very compact and extremely light 3. Cost is low because it employ resistors and capacitors which are cheap 

Explain the operation of RC triggering circuit with neat diagram.

Description : Explain the operation of RC triggering circuit with neat diagram.

Last Answer : RC triggering circuit: The RC half-wave triggering circuit is as shown in the figure. During negative halfcycle of supply voltage vs, the capacitor C charges through diode D2 and load, ... be triggered at 0° & 180° because the supply voltage is zero and less than finger voltage. 

RC Heli recommendation for a newbie?

Description : RC Heli recommendation for a newbie?

Last Answer : answer:Helis are hard to fly; I'd recommend trying RC foamies first or starting with a smaller, cheaper heli (you are going to crash it at least a few times-everyone does when they get ... things expensive but they can be really great when tuned just right. Are you an engineer by background?

Can An Rc Circuit Be Used As Clock Source For 8085?

Description : Can An Rc Circuit Be Used As Clock Source For 8085?

Last Answer : Answer :Yes, it can be used, if an accurate clock frequency is not required. Also, the component cost is low compared to LC or Crystal.

Time constant for RC circuit formula

Description : Time constant for RC circuit formula τ = RC Where, τ = time constant

Last Answer : Time constant for RC circuit formula τ = RC Where, τ = time constant

RC triggering is preferred over resistance triggering because

Description : RC triggering is preferred over resistance triggering because (A) it provides triggering at a precise instant (B) it gives a longer duration gate pulse (C) it enables triggering at a larger value of firing angle (D) it protects the SCR against high dv/dt

Last Answer : a

Draw the labeled circuit of RC phase shift oscillator. State the formula for frequency of oscillator.

Description : Draw the labeled circuit of RC phase shift oscillator. State the formula for frequency of oscillator.

Last Answer : Frequency of oscillation is given by,

Draw the block diagram of PLC.

Description : Draw the block diagram of PLC.

Last Answer : Block diagram of PLC and input/output devices used for PLC Input/output devices - The input module has bank of terminals for physically connecting input devices, like push buttons, limit switches etc. ... is to translate signals from the PLC's CPU into a form that the output device can use.

Draw equivalent circuit of alternator.

Description : Draw equivalent circuit of alternator.

Last Answer : Equivalent circuit of alternator

State different types of electrical signal and draw all types of waveforms.

Description : State different types of electrical signal and draw all types of waveforms.

Last Answer : Types of electrical signals 1) Sine wave 2) Triangular wave 3) Square wave Waveforms