Define ripple factor and PIV of diode.

1 Answer

Answer :

1. Ripple factor: It is define as ratio of R.M.S. value of AC component to the DC component in the output. 

2. PIV : It is maximum reverse voltage that diode can withstand without destroying junction.

Related questions

Description : Define PIV, TUF, ripple factor, efficiency of rectifier.

Last Answer : PIV: Peak Inverse Voltage (PIV) is defined as the maximum negative voltage which appears across non-conducting reverse biased diode. TUF : Transformer Utilization Factor (TUF) is defined as the ratio of DC output ... Efficiency of rectifier: η = DC output power/ AC input power = PLdc / Pac

Description : Define ripple factor and PIV of HWR

Last Answer : Peak Inverse Voltage (PIV) or Peak Reverse Voltage (PRV) refer to the maximum voltage a diode can withstand in the reverse-biased direction before breakdown. Also may be called Reverse Breakdown Voltage.

Description : Define leakage factor.

Last Answer : It is the ratio of total flux to leakage flux.

Description : A 3 -stage ripple counter has Flip Flop with propagation delay of 25 nsec and pulse width of strobe input 10 nsec. Then the maximum operating frequency at which counter operates reliably is

Last Answer : A 3 -stage ripple counter has Flip Flop with propagation delay of 25 nsec and pulse width of strobe input 10 nsec. Then the maximum operating frequency at which counter operates reliably is 12.67 MHz

Description : In a half-wave rectifier, if an a.c supply is 60 Hz. Then what is the a.c ripple at output? (A) 30 Hz (B) 60 Hz (C) 20 Hz (D) 15 Hz

Last Answer : In a half-wave rectifier, if an a.c supply is 60 Hz. Then what is the a.c ripple at output? (A) 30 Hz (B) 60 Hz (C) 20 Hz (D) 15 Hz

Description : What is the ripple voltage?

Last Answer : Ripple voltage is the small variations in Dc voltage that remain after filtering in a power supply.

Description : Define given parameters and state their values for bridge rectifier (i) Ripple factor (ii) PIV of diode.

Last Answer : Ripple Factor: Ripple Factor is defined as the ratio of RMS value of the AC component of output to the DC or average value of the output. Mathematically it is expressed as, ( ... which appears across non-conducting reverse biased diode. (ii) PIV of diode for bridge rectifier-Vm

Description : Diode VI characteristics

Last Answer : Diode VI characteristics

Description : applications of Schottky diode.

Last Answer : 1) To rectify very high frequency signals. 2) As a switching device in digital computers. 3) In clipping & and clamping circuits. 4) In low power schottky TTL circuits. 5) In mixing and detecting circuits used in communication systems. 6) In low voltage power supply circuits.

Description :  applications of P-N junction diode

Last Answer : 1.It is used as rectifier in DC power supply 2.It is used as free wheel diode across relay or inductive load 3.It is used as switch in logic circuits used in computers 4.It is used as detector in demodulation circuits of communication receiver 

Description : State any two applications of zener diode.

Last Answer : Applications of Zener Diode: i) As a voltage regulator. ii) As a fixed reference voltage provider in transistor biasing circuits. iii) As peak clippers or limiters in wave shaping circuits.

Description : List specification of zener diode

Last Answer : 1. Zener Voltage 2. Maximum Zener current 3. Power dissipation 4. Operating temperature 5. Dynamic Resistance 

Description : Explain the operating principle of LASER and list applications of LASER diode.

Last Answer : A basic construction of Laser diode is as shown . A PN junction is formed by two layers of doped gallium arsenide. There is highly reflective surface at one end of PN junction and ... 6. laser scanning and light beam illumination. 7. Military applications 8. Medical surgery 9.Diamond cutting

Description : Write short notes on diode.

Last Answer : Diode is made from semiconductor material like silicon or germanium. Diode may use as rectifier which convert AC to DC. It is a electronic component. It is two terminal device, one is anode and second is ... in one direction. Diode is made from P-type and N-type material. Diode have a PN junction.

Description : what is the minimum voltage required to turn on a diode ?

Last Answer : 0.7 v sil and 0.3 v for gr

Description : what is diode ?

Last Answer : Semiconductor device. That allows flow of current in one direction

Description : Define Q factor.

Last Answer : Quality Factor: The quality factor basically represents a figure of merit of a component (practical inductor or capacitor) or a complete circuit. It is a dimensionless number and defined as: ... between two branches of the circuit to the current taken by the parallel circuit from the source.

Description : How does the temperature affect the Zener voltage of a Zener diode?

Last Answer : The Zener voltage of a Zener diode is affected by temperature changes. The Zener voltage of a diode is directly proportional to the temperature. This means that as the temperature increases, the ... is given by the Zener voltage temperature coefficient, which is specified in the diode's datasheet.

Description : Explain Zener Diode.

Last Answer : A Zener diode is a type of semiconductor diode that is designed to operate in the reverse breakdown region of its characteristic curve. Unlike regular diodes, which are designed to conduct ... in surge protectors, power supplies, and other applications where precise voltage regulation is required.

Description : Suggest the diode material suitable to rectify 0.5V AC signal.

Last Answer : The diode material suitable to rectify 0.5V AC signal is silicon

Description : Draw symbols of zener diode and LED.

Last Answer : Symbol of zener diode : Symbol of LED

Description : Write the function of freewheeling diode.

Last Answer : Function of Freewheeling Diode (FWD): a) Freewheeling diode is used across inductive loads such as coils, dc motor armature etc. to prevent voltage spikes across these loads when the switching ... current is shifted from switching device, it is turned off easily and regain its blocking ability.

Description : Avalanche diode

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : A zener voltage regulator has load requirements of 12 V and 2 A. The zener diode minimum current requirement is 0.2 A. The minimum voltage at input is 24 V. What is the required value of series resistance with source? A) 5.45 Ω B) 6 Ω C) 7.2 Ω D) 6.38 Ω  

Last Answer : A zener voltage regulator has load requirements of 12 V and 2 A. The zener diode minimum current requirement is 0.2 A. The minimum voltage at input is 24 V. What is the required value of series resistance with source? A) 5.45 Ω B) 6 Ω C) 7.2 Ω D) 6.38 Ω  

Description : A diode in which the change in reverse bias voltage varies the capacitance is called as A) Varactor diode B) Switching diode C) Tunnel diode D) Zener-diode  

Last Answer : A diode in which the change in reverse bias voltage varies the capacitance is called as Varactor diode

Description : Which diode exhibits negative resistance characteristic? (A) LED (B) Zener (C) Tunnel diode (D) PN diode

Last Answer : Which diode exhibits negative resistance characteristic? (A) LED (B) Zener (C) Tunnel diode (D) PN diode

Description : What is a diode clamper circuit?

Last Answer : Tha faction of diode 

Description : What is the use of diode in the circuit?

Last Answer : Diode is a device which allows the flow of current in one direction and blocks the current in opposite direction.

Description : How can you identify a zener diode?

Last Answer : It  conducts  current  in  either  direction.

Description : How do we test a diode?

Last Answer : test

Description : Explain the formation of parasitic BJT and parasitic diode in Power MOSFET. Can parasitic diode be used in same power electronics applications?

Last Answer : Parasitic Diode: The parasitic diode is in between drain and source. The MOSFET structure itself contains parasitic diode or body drain diode. This parasitic diode allows the reverse flow of current when the ... of MOSFET as a BJT collector. Parasitic BJT operates in the cut-off region.

Description : Justify the statement. Antiparallel diode is connected across MOSFET.

Last Answer : In MOSFET current is flow from drain to source but when the load is inductive the current may flow in opposite direction. To avoid the opposite flow of current and to protect MOSFET the antiparallel diode is connected across MOSFET.

Description : How much time a diode takes to switch ON in forward bias condition.

Last Answer : t=0 sec.

Description : What would cause a diode to fail?

Last Answer : Supply voltage beyond its limit

Description : Can we use a zener diode as a rectifier?

Last Answer : Yes we can use zener diode as rectifier but it have limitations better to use normal diode. Zener diode have some different applications.

Description : What is the use of Schottky diode?

Last Answer : Schottky diode are use in SMPS, Sample and hold circuits and voltage clamping etc.

Description : What is the use of laser diode?

Last Answer : laser diodes are use in telecommunication, rangefinders, barcode readers etc.

Description : What does a Shockley diode do?

Last Answer : It is diode have low forward voltage drop and very high switching action

Description : What is the use of fast recovery diode?

Last Answer : Fast recovery diode are used in high frequency rectification. Fast recovery diode also used for freewheeling. Fast recovery diode also used for DC to DC converter.

Description : What is the use of Tunnel diode ?

Last Answer : Tunnel diode is use in frequency converters and detectors, ultra high speed switching, amplifiers, etc.

Last Answer : In Reverse bias of diode when the cathode is connected to positive and anode is connected to negative very small current flows this very small current is known as leakage current of diode.

Last Answer : Diode conducts when the anode voltage is greater than the cathode voltage.

Last Answer : Diode have two terminals.

Last Answer : It is semiconductor diode with a low forward voltage drop and very high switching action

Last Answer : PN junction of zener diode is heavily doped than ordinary diode. For the occurrence of Zener effect the zener diode is heavily doped. If the zener diode is not heavily doped then Zener effect ... breakdown voltage is sharp. If the diode is lightly doped the diode will have higher breakdown voltage.

Last Answer : Yes dynamic impedance of zener diode vary.

Last Answer : Yes, Zener diode is a voltage regulator. Zener diode maintain constant reverse Biased Voltage. If the current is varying then also zener diode maintain constant voltage.

Last Answer : Yes it can be, and it will act like a normal PN junction diode. The characteristic of ZENER diode is exactly same as PN junction diode in forward Bias.

Description : Define form factor and peak factor.

Last Answer : Form factor is equal to rms value divided by average value ... Peak factor is equal to Max value divided by rms value.

Description : Define: 1) Electrode 2) Electrolyte

Last Answer : Electrode: An electrode is a small piece of metal or other substance that is used to take an electric current to or from the source of power.  Electrolyte: The substance which is ... electric current to pass through it, resulting in the chemical decomposition, is known as an electrolyte.