Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than chromate coating (C) The base metal to be electroplated is normally made the cathode of the electrolytic cell and coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than chromate coating (C) The base metal to be electroplated is normally made the cathode of the electrolytic cell and coating metal is made the anode
(D) Calorising is the process of coating steel with chromium
by

1 Answer

Answer :

(D) Calorising is the process of coating steel with chromium
by

Related questions

__________ is the process of coating the surface of steel with aluminium oxide, thereby imparting it increased resistance to corrosion & oxidation upto a temperature of 700°C. (A) Veneering (B) Galvanising (C) Electroplating (D) Calorising

Description : __________ is the process of coating the surface of steel with aluminium oxide, thereby imparting it increased resistance to corrosion & oxidation upto a temperature of 700°C. (A) Veneering (B) Galvanising (C) Electroplating (D) Calorising

Last Answer : (D) Calorising

(3) made cathode and a pure nickel red, the anode Explanation: Electroplating is the deposition by electrolysis of a coating of metal upon a conducting surface. The simplest system makes the object to be plated the negative electrode (cathode) or plate in a galvanic couple. Thus a spoon or other object may be connected by a wire to a plate of nickel. The process that occurs on the spoon is called reduction and, therefore, the spoon is also referred to as a cathode.

Description : (3) made cathode and a pure nickel red, the anode Explanation: Electroplating is the deposition by electrolysis of a coating of metal upon a conducting surface. The simplest system makes the object to be ... on the spoon is called reduction and, therefore, the spoon is also referred to as a cathode.

Last Answer : Which of the following is not a method of preparing oxygen? (1) Electrolysis of water (2) Fractional distillation of liquid air (3) Decomposition of potassium permanganate (4) Decomposition of manganese dioxide

The process of coating steel sheets by zinc to improve its corrosion resistance is called (A) Calorising (B) Galvanising (C) Zincification (D) Tempering

Description : The process of coating steel sheets by zinc to improve its corrosion resistance is called (A) Calorising (B) Galvanising (C) Zincification (D) Tempering

Last Answer : (B) Galvanising

What products do we get on electrolysis of saturated brine using steel cathode and graphite anode in an electrolytic cell? (A) Cl2 & Na (B) Cl2 & H2 (C) O2 & H2 (D) Cl2 , H2 & NaOH solution

Description : What products do we get on electrolysis of saturated brine using steel cathode and graphite anode in an electrolytic cell? (A) Cl2 & Na (B) Cl2 & H2 (C) O2 & H2 (D) Cl2 , H2 & NaOH solution

Last Answer : (D) Cl2 , H2 & NaOH solution

When a spoon is to be electroplated with nickel the spoon is (1) dipped in a nickel sulphate solution (2) made anode and a pure nickel rod, the cathode (3) made cathode and a pure nickel red, the anode (4) coated with nickel sulphate and dried

Description : When a spoon is to be electroplated with nickel the spoon is (1) dipped in a nickel sulphate solution (2) made anode and a pure nickel rod, the cathode (3) made cathode and a pure nickel red, the anode (4) coated with nickel sulphate and dried

Last Answer : made cathode and a pure nickel red, the anode

Sacrificial anode method is used in the protection of pipelines which are buried underground. Sacrificial anode (A) Occurs higher in the electro-chemical series of metals (B) Is exemplified by magnesium plate (C) Is much cheaper than the cathodic base material to be guarded against corrosion (D) All (A), (B) & (C)

Description : Sacrificial anode method is used in the protection of pipelines which are buried underground. Sacrificial anode (A) Occurs higher in the electro-chemical series of metals (B) Is exemplified by magnesium plate (C) ... cathodic base material to be guarded against corrosion (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Which of the following metals in not used for coating of the base metal to guard it against corrosion? (A) Lead (B) Cadmium (C) Magnesium (D) Aluminium

Description : Which of the following metals in not used for coating of the base metal to guard it against corrosion? (A) Lead (B) Cadmium (C) Magnesium (D) Aluminium

Last Answer : (C) Magnesium

Corrosion of a metal occurs at the (a) Anode (b) Cathode (c) Both anode and cathode (d) None of the above

Description : Corrosion of a metal occurs at the (a) Anode (b) Cathode (c) Both anode and cathode (d) None of the above

Last Answer : Ans:(a)

Pick out the wrong statement. (A) The X-rays cannot be deflected by electric field unlike cathode rays (B) The intensity of X-rays can be measured by ionisation current produced due to the ionisation of gas by X-rays (C) The quality of X-rays can be controlled by varying the anode-cathode voltage (D) Crystal structure of a material can be studied by an electron microscope

Description : Pick out the wrong statement. (A) The X-rays cannot be deflected by electric field unlike cathode rays (B) The intensity of X-rays can be measured by ionisation current produced due to the ... the anode-cathode voltage (D) Crystal structure of a material can be studied by an electron microscope

Last Answer : (C) The quality of X-rays can be controlled by varying the anode-cathode voltage

Lead is (A) Not resistant to corrosion (B) Used as a cathodic material (C) Not used as pigment (in its compound forms) for paints (D) Used as a shock absorber (in mattress form) between the foundation and steel framework of skyscraper buildings

Description : Lead is (A) Not resistant to corrosion (B) Used as a cathodic material (C) Not used as pigment (in its compound forms) for paints (D) Used as a shock absorber (in mattress form) between the foundation and steel framework of skyscraper buildings

Last Answer : (D) Used as a shock absorber (in mattress form) between the foundation and steel framework of skyscraper buildings

. Plasticisers are added to paints to (A) Make it corrosion resistant (B) Make glossy surface (C) Give elasticity & prevent cracking of the film (D) Increase atmospheric oxidation

Description : . Plasticisers are added to paints to (A) Make it corrosion resistant (B) Make glossy surface (C) Give elasticity & prevent cracking of the film (D) Increase atmospheric oxidation

Last Answer : (C) Give elasticity & prevent cracking of the film

Caustic soda is produced in a mercury cell having anode and cathode made respectively of moving mercury and (A) Moving mercury and graphite (B) Graphite and moving mercury (C) Moving mercury and carbon (D) Moving mercury and crimped steel wire

Description : Caustic soda is produced in a mercury cell having anode and cathode made respectively of moving mercury and (A) Moving mercury and graphite (B) Graphite and moving mercury (C) Moving mercury and carbon (D) Moving mercury and crimped steel wire

Last Answer : (B) Graphite and moving mercury

. Enamels and paints are generally __________ fluid. (A) Rheopectic (B) Pseudo-plastic (C) Thixotropic (D) Dilatant

Description : . Enamels and paints are generally __________ fluid. (A) Rheopectic (B) Pseudo-plastic (C) Thixotropic (D) Dilatant

Last Answer : (B) Pseudo-plastic

Exposure to SO2 containing chimney gases results in the (A) Reduction in strength of leather & cloth (B) Acceleration of corrosion rates of metals (C) Increased drying & hardening time of paints (D) All (A), (B) and (C)

Description : Exposure to SO2 containing chimney gases results in the (A) Reduction in strength of leather & cloth (B) Acceleration of corrosion rates of metals (C) Increased drying & hardening time of paints (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) A soft magnetic material should have high permeability and small area of hysteresis loop (B) Poisson's ratio of high melting point metals is more than unity (C) Solders generally melt at less than 185°C (D) Steel produced by B.O.F process is ideally suited for manufacturing flat product

Description : Pick out the wrong statement. (A) A soft magnetic material should have high permeability and small area of hysteresis loop (B) Poisson's ratio of high melting point metals is more than unity (C) ... less than 185°C (D) Steel produced by B.O.F process is ideally suited for manufacturing flat product

Last Answer : Option B

Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. What is wrong if anode is made of nickel instant

Description : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite rods. What is wrong if anode is made of nickel instant

Last Answer : Electrolytic reduction of `Al_(2)O_(3)`. Electrolyte (`Al_(2)O_(3)+"cryolite")` Anode: Graphite ... CO D. Nickel May be affected by high temperature.

Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite)` Cathode : fraphite inside Fe -Container Pick out the statement which is

Description : Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite)` Cathode : fraphite inside Fe -Container Pick out the statement which is

Last Answer : Electrolytic reducation of `Al_(2)O_(3)` Electrolyte `(Al_(2)O_(3)+cryolite)` Cathode : fraphite ... 2)` D. nikkel may be affected at high temperature

Define the following : Electrochemistry , Electrolyte , Non-Electrolyte , Electrolytic Cell , Galvanic or Voltaic cell , Electrolysis , Hydrolysis & electroplating.

Description : Define the following : Electrochemistry , Electrolyte , Non-Electrolyte , Electrolytic Cell , Galvanic or Voltaic cell , Electrolysis , Hydrolysis & electroplating.

Last Answer : Ans : (a) Electrochemistry : Electrochemistry is the branch of chemistry which deals with such chemical reactions involving the inter-conversion of electrical energy and chemical energy. Example : Batteries , ... should be a solution of the coating metal, such as its metal nitrate or sulfate.

The metals commonly used for electroplating are – (1) Gold, Sodium and Chromium (2) Chromium, Copper and Nickel (3) Nickel, Lead and Chromium (4) Gold, Sodium and Potassium

Description : The metals commonly used for electroplating are – (1) Gold, Sodium and Chromium (2) Chromium, Copper and Nickel (3) Nickel, Lead and Chromium (4) Gold, Sodium and Potassium

Last Answer : (2) Chromium, Copper and Nickel Explanation: The process of electroplating takes place as metals in ionic form move from a positive to negative electrode. An electric current passing through the ... ability of metal objects. Plating protects by one of two ways, either sacrificially or mechanically.

The metals commonly used for electroplating are (1) Gold, Sodium and Chromium (2) Chromium, Copper and Nickel (3) Nickel, Lead and Chromium (4) Gold, Sodium and Potassium

Description : The metals commonly used for electroplating are (1) Gold, Sodium and Chromium (2) Chromium, Copper and Nickel (3) Nickel, Lead and Chromium (4) Gold, Sodium and Potassium

Last Answer : Chromium, Copper and Nickel

Galvanising (i.e., zinc coating) of steel sheets is done to (A) Prevent its rusting by contact with corrosive atmosphere (B) Protect the base metal by cathodic protection (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Galvanising (i.e., zinc coating) of steel sheets is done to (A) Prevent its rusting by contact with corrosive atmosphere (B) Protect the base metal by cathodic protection (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Pick out the wrong statement. (A) Metal/alloys having hexagonal crystal lattice structure are less malleable than those having cubic crystal lattice structure (B) Metal/alloys having body centred cubic (bcc) crystal lattice structure is stronger & less ductile than those having face centred cubic (fcc) crystal lattice structure (C) Tungsten has a body centred cubic (bcc) crystal lattice structure (D) Both ferritic & austenitic stainless steel has a face centred cubic (fcc) crystal structure

Description : Pick out the wrong statement. (A) Metal/alloys having hexagonal crystal lattice structure are less malleable than those having cubic crystal lattice structure (B) Metal/alloys having body centred cubic ... D) Both ferritic & austenitic stainless steel has a face centred cubic (fcc) crystal structure

Last Answer : (C) Tungsten has a body centred cubic (bcc) crystal lattice structure

The component labeled 'CR1' in the circuit shown in the illustration __________________. EL-0085 A. varies its anode/cathode polarity depending on 'RL' current B. rectifies the varying voltage from the collector of 'Q1' C. acts as a low capacitive reactance to smooth ripple D. establishes a constant reference voltage for the base of 'Q1'

Description : The component labeled 'CR1' in the circuit shown in the illustration __________________. EL-0085 A. varies its anode/cathode polarity depending on 'RL' current B. rectifies the varying voltage from the ... reactance to smooth ripple D. establishes a constant reference voltage for the base of 'Q1'

Last Answer : Answer: D

The device in figure 'B' shown in the illustration will conduct when the ____________. EL-0067 A. base-emitter is forward biased and the collector-base is reverse biased B. anode-cathode is forward biased and the cathode-gate is forward biased C. source-gate is forward biased and the gate-drain is reversed biased D. terminal 1-2 is forward biased and the emitter-terminal 1 is reverse biased

Description : The device in figure 'B' shown in the illustration will conduct when the ____________. EL-0067 A. base-emitter is forward biased and the collector-base is reverse biased B. anode-cathode is forward ... is reversed biased D. terminal 1-2 is forward biased and the emitter-terminal 1 is reverse biased

Last Answer : Answer: B

The leads of the device in figure 'B' shown in the illustration are named _________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Description : The leads of the device in figure 'B' shown in the illustration are named _________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: A

Leads on the device in figure 'B' shown in the illustration are named ____________. EL-0067 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Description : Leads on the device in figure 'B' shown in the illustration are named ____________. EL-0067 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: D

The leads of the device in figure 'A' shown in the illustration are named the _______________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Description : The leads of the device in figure 'A' shown in the illustration are named the _______________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: C

The coating of a thin layer of zinc on steel or iron objects is known as – (1) Hot dipping (2) Tinning (3) Galvanising (4) Electroplating

Description : The coating of a thin layer of zinc on steel or iron objects is known as – (1) Hot dipping (2) Tinning (3) Galvanising (4) Electroplating

Last Answer : (3) Galvanising Explanation: Galvanization is the process of applying a protective zinc coating to steel or iron, in order to prevent rusting. Although galvanization can be done with electrochemical and ... is hot-dip galvanization, in which steel parts are submerged in a bath of molten zinc.

The coating of a thin layer of zinc on steel or iron objects is known as (1) Hot dipping (2) Tinning (3) Galvanising (4) Electroplating

Description : The coating of a thin layer of zinc on steel or iron objects is known as (1) Hot dipping (2) Tinning (3) Galvanising (4) Electroplating

Last Answer : Galvanising

Zinc is not used (A) For producing zinc base die casting alloys (B) In its oxide form as pigments (C) As anode for corrosion prevention in boiler (D) As an alloying element in various bronzes

Description : Zinc is not used (A) For producing zinc base die casting alloys (B) In its oxide form as pigments (C) As anode for corrosion prevention in boiler (D) As an alloying element in various bronzes

Last Answer : (D) As an alloying element in various bronzes

Pick out the correct statement. (A) Stainless steel is nothing but chromium coated steel (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal (C) Plastic deformation of a material is its temporary distortion under the action of applied stress (D) Rusting of iron is not electrochemical in nature

Description : Pick out the correct statement. (A) Stainless steel is nothing but chromium coated steel (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal (C) ... its temporary distortion under the action of applied stress (D) Rusting of iron is not electrochemical in nature

Last Answer : (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal

In electro-refining, the pure metal is deposited on – (1) vessel (2) electrolyte (3) cathode (4) anode

Description : In electro-refining, the pure metal is deposited on – (1) vessel (2) electrolyte (3) cathode (4) anode

Last Answer : (3) cathode Explanation: In electro-refining, the anodes consist of unrefined impure metal, and as the current passes through the acidic electrolyte the anodes are corroded into the solution so ... pure metal onto the cathodes. Electrolytic refining is used to extract impurities from crude metals.

In electro-refining, the pure metal is deposited on (1) vessel (2) electrolyte (3) cathode (4) anode

Description : In electro-refining, the pure metal is deposited on (1) vessel (2) electrolyte (3) cathode (4) anode

Last Answer : cathode

Identify the correct statement with reference to the extractive metallurgy of aluminium. (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3 (B) Approximately 80% of the aluminium deposited on the cathode comes from cryolite (C) Sodium is deposited along with aluminium, but is immediately vaporised (D) Anode effect sets in when the cryolite concentration goes below 40%.

Description : Identify the correct statement with reference to the extractive metallurgy of aluminium. (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3 (B) Approximately 80% of ... is immediately vaporised (D) Anode effect sets in when the cryolite concentration goes below 40%.

Last Answer : (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3

Pick out the wrong statement. (A) Copper is the metal having the highest electronic conductivity (B) Hardenability & Weldability of metals are inversely related (C) Covalent bonding formed by sharing of electrons is present in all semiconductor materials (D) Glass transition temperature applies to 'polymers' but not to 'glasses'

Description : Pick out the wrong statement. (A) Copper is the metal having the highest electronic conductivity (B) Hardenability & Weldability of metals are inversely related (C) Covalent bonding formed by ... all semiconductor materials (D) Glass transition temperature applies to 'polymers' but not to 'glasses'

Last Answer : Option A

Pick out the wrong statement about the machinability of metals. Machinability of a metal (A) Decreases with increase in strain hardening tendencies (B) Decreases with increase in hardness, in general (C) Depend on the composition, microstructure and physical & mechanical

Description : Pick out the wrong statement about the machinability of metals. Machinability of a metal (A) Decreases with increase in strain hardening tendencies (B) Decreases with increase in hardness, in general (C) Depend on the composition, microstructure and physical & mechanical

Last Answer : Option C

Which of the following metal is used in electroplating to make object appear shinning? a) Iron b)copper c)chromium d)aluminium

Description : Which of the following metal is used in electroplating to make object appear shinning? a) Iron b)copper c)chromium d)aluminium

Last Answer : c)chromium

Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction (D) Nichrome, a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Description : Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction ... , a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Last Answer : (B) Presence of silicon in steel decreases its electrical resistance

Mild steel is (A) A low carbon steel (0.05 to 0.3% carbon) (B) Highly resistant to corrosion (as much as stainless steel) (C) A high carbon steel (0.5 to 1.5% carbon) (D) Very poor in strength & ductility

Description : Mild steel is (A) A low carbon steel (0.05 to 0.3% carbon) (B) Highly resistant to corrosion (as much as stainless steel) (C) A high carbon steel (0.5 to 1.5% carbon) (D) Very poor in strength & ductility

Last Answer : (A) A low carbon steel (0.05 to 0.3% carbon)

The cathode used in the electrolytic cell during aluminium extraction is made of

Description : The cathode used in the electrolytic cell during aluminium extraction is made of

Last Answer : The cathode used in the electrolytic cell during aluminium extraction is made of A. Aluminium B. Carbon lining C. Iron D. Steel

Pick out the wrong statement. (A) The toughness of a material decreases, when it is heated (B) Crane hooks are normally made of wrought iron (C) Cold working of a metal decreases its fatigue strength (D) The temperature at which new grains are formed in a metal is known as the recrystallisation temperature

Description : Pick out the wrong statement. (A) The toughness of a material decreases, when it is heated (B) Crane hooks are normally made of wrought iron (C) Cold working of a metal decreases its ... (D) The temperature at which new grains are formed in a metal is known as the recrystallisation temperature

Last Answer : (C) Cold working of a metal decreases its fatigue strength

Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the possibility of tower wall collapse (B) Packed towers are preferred over plate towers for handling corrosive and foamy liquids (C) Diameter of randomly packed tower is normally more than 1.2 metres (D) Due to uneven supply and improper distribution of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Description : Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the ... of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Last Answer : (C) Diameter of randomly packed tower is normally more than 1.2 metres

Pick up the incorrect statement from the following: (A) Plastics are chemical resistant (B) Plastics are durable (C) Plastics are ductile (D) Plastics are excellent electric insulators

Description : Pick up the incorrect statement from the following: (A) Plastics are chemical resistant (B) Plastics are durable (C) Plastics are ductile (D) Plastics are excellent electric insulators

Last Answer : Answer: Option C

Corrosion in Steel girder bridges may be prevented by : a) Protective coatings by painting b) Metallising c) Use of epoxy based paints d) All the above*

Description : Corrosion in Steel girder bridges may be prevented by : a) Protective coatings by painting b) Metallising c) Use of epoxy based paints d) All the above*

Last Answer : d) All the above*

Hot dipping process is used for coating a low melting point metal (e.g. Pb, Sn, Zn) on iron, steel & copper having relatively higher melting points. Which of the following is not a hot dipping process? (A) Galvanising (B) Tinning (C) Sherardizing (D) None of these

Description : Hot dipping process is used for coating a low melting point metal (e.g. Pb, Sn, Zn) on iron, steel & copper having relatively higher melting points. Which of the following is not a hot dipping process? (A) Galvanising (B) Tinning (C) Sherardizing (D) None of these

Last Answer : (C) Sherardizing

Sherardizing process is used for (A) Surface coating (B) Heat treatment of high speed steel (C) Cold working on metals (D) None of these

Description : Sherardizing process is used for (A) Surface coating (B) Heat treatment of high speed steel (C) Cold working on metals (D) None of these

Last Answer : (A) Surface coating

Inverter cell anode and cathode of the…………. cell is used for vehicle (a) Copper electrode zinc (b)Zinc copper (c) Aluminium zinc (d)Nickel Cobalt

Description : Inverter cell anode and cathode of the…………. cell is used for vehicle (a) Copper electrode zinc (b)Zinc copper (c) Aluminium zinc (d)Nickel Cobalt

Last Answer : (a) Copper electrode zinc

In the common dry cell, the zinc atoms are: w) reduced at the cathode x) oxidized at the cathode y) oxidized at the anode z) reduced at the anode

Description : In the common dry cell, the zinc atoms are: w) reduced at the cathode x) oxidized at the cathode y) oxidized at the anode z) reduced at the anode

Last Answer : ANSWER: Y -- OXIDIZED AT THE ANODE

Which of the substances listed should be applied to battery terminals to help prevent corrosion? A. Zinc chromate B. Naval jelly C. Lead peroxide D. Petroleum jelly

Description : Which of the substances listed should be applied to battery terminals to help prevent corrosion? A. Zinc chromate B. Naval jelly C. Lead peroxide D. Petroleum jelly

Last Answer : Answer: D