Cost of instrumentation in a modern chemical plant ranges from __________ percent of the total plant cost. (A) 5 to 10 (B) 20 to 30 (C) 40 to 50 (D) 60 to 70

Cost of instrumentation in a modern chemical plant ranges from __________ percent of the total plant cost.
(A) 5 to 10
(B) 20 to 30
(C) 40 to 50
(D) 60 to 70
by

1 Answer

Answer :

(B) 20 to 30
by

Related questions

Purchased cost of equipments for a chemical process plant ranges from __________ percent of the fixed capital investment. (A) 10 to 20 (B) 20 to 40 (C) 45 to 60 (D) 65 to 75

Description : Purchased cost of equipments for a chemical process plant ranges from __________ percent of the fixed capital investment. (A) 10 to 20 (B) 20 to 40 (C) 45 to 60 (D) 65 to 75

Last Answer : (B) 20 to 40

Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Description : Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Last Answer : (B) 35 to 45

'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product cost. (A) 1 to 5 (B) 10 to 20 (C) 25 to 35 (D) 35 to 45

Description : 'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product ... 1 to 5 (B) 10 to 20 (C) 25 to 35 (D) 35 to 45

Last Answer : (B) 10 to 20

The percent of total iron in body in hemoglobin is (A) 10–20 (B) 20–30 (C) 30–40 (D) 60–70

Description : The percent of total iron in body in hemoglobin is (A) 10–20 (B) 20–30 (C) 30–40 (D) 60–70

Last Answer : Answer : D

The ratio of working capital to total capital investment for most chemical plants (except for non-seasonal based products) is in the range of __________ percent. (A) 0.1 to 1 (B) 1 to 2 (C) 10 to 20 (D) 50 to 60

Description : The ratio of working capital to total capital investment for most chemical plants (except for non-seasonal based products) is in the range of __________ percent. (A) 0.1 to 1 (B) 1 to 2 (C) 10 to 20 (D) 50 to 60

Last Answer : (C) 10 to 20

In practice, the compression ratio of compression-ignition (CI) engine ranges from (A) 15 to 25 (B) 5 to 10 (C) 40 to 55 (D) 60 to 70

Description : In practice, the compression ratio of compression-ignition (CI) engine ranges from (A) 15 to 25 (B) 5 to 10 (C) 40 to 55 (D) 60 to 70

Last Answer : Option A

The percentage of the calcium eliminated in feces is (A) 10–20 (B) 30–40 (C) 50–60 (D) 70–90

Description : The percentage of the calcium eliminated in feces is (A) 10–20 (B) 30–40 (C) 50–60 (D) 70–90

Last Answer : Answer : D

Most chemical plants use an initial working capital amounting to 10- 20% of the total capital investment. But this percentage may increase to __________ percent in case of seasonal products manufacturing plant. (A) 30 (B) 50 (C) 75 (D) 95

Description : Most chemical plants use an initial working capital amounting to 10- 20% of the total capital investment. But this percentage may increase to __________ percent in case of seasonal products manufacturing plant. (A) 30 (B) 50 (C) 75 (D) 95

Last Answer : (B) 50

Three materials A, B and C of equal thickness and of thermal conductivity of 20, 40 & 60 kcal/hr. m. °C respectively are joined together. The temperature outside of A and C are 30°C and 100°C respectively. The interface between B and C will be at a temperature of __________ °C. (A) 40 (B) 95 (C) 70 (D) 50

Description : Three materials A, B and C of equal thickness and of thermal conductivity of 20, 40 & 60 kcal/hr. m. °C respectively are joined together. The temperature outside of A and C are 30°C and 100°C respectively. The interface ... C will be at a temperature of __________ °C. (A) 40 (B) 95 (C) 70 (D) 50

Last Answer : (C) 70

Consider a fuzzy set old as defined below Old = {(20, 0.1), (30, 0.2), (40, 0.4), (50, 0.6), (60, 0.8), (70, 1), (80, 1)} Then the alpha-cut for alpha = 0.4 for the set old will be (A) {(40, 0.4)} (B) {50, 60, 70, 80} (C) {(20, 0.1), (30, 0.2)} (D) {(20, 0), (30, 0), (40, 1), (50, 1), (60, 1), (70, 1), (80, 1)}

Description : Consider a fuzzy set old as defined below Old = {(20, 0.1), (30, 0.2), (40, 0.4), (50, 0.6), (60, 0.8), (70, 1), (80, 1)} Then the alpha-cut for alpha = 0.4 for the set old will be (A) {(40, 0.4)} (B) {50, 60, ... , (30, 0.2)} (D) {(20, 0), (30, 0), (40, 1), (50, 1), (60, 1), (70, 1), (80, 1)}

Last Answer : (D) {(20, 0), (30, 0), (40, 1), (50, 1), (60, 1), (70, 1), (80, 1)}

A natural draft cooling tower is filled with wooden grids, which covers about __________ percent of the tower height. (A) 10-15 (B) 30-40 (C) 70-80 (D) 90-100

Description : A natural draft cooling tower is filled with wooden grids, which covers about __________ percent of the tower height. (A) 10-15 (B) 30-40 (C) 70-80 (D) 90-100

Last Answer : (A) 10-15

Alcohol content in freshly prepared natural and fortified **** may be respectively around __________ percent. (A) 7-14 and 14-30 (B) 7-14 and 40-50 (C) 14 - 30 and 40-50 (D) 10 - 20 and 40 - 50

Description : Alcohol content in freshly prepared natural and fortified wine may be respectively around __________ percent. (A) 7-14 and 14-30 (B) 7-14 and 40-50 (C) 14 - 30 and 40-50 (D) 10 - 20 and 40 - 50

Last Answer : (A) 7-14 and 14-30

Construction expenses are roughly __________ percent of the total direct cost of the plant. (A) 2 (B) 10 (C) 30 (D) 50

Description : Construction expenses are roughly __________ percent of the total direct cost of the plant. (A) 2 (B) 10 (C) 30 (D) 50

Last Answer : B) 10

A retailer of Real Dry deodorant prices a can at £2.00; it cost the retailer £1.40. What is the, markup as a percentage of the selling price? A)3.0 percent B)30 percent C)70.0 percent D)20.0 percent

Description : A retailer of Real Dry deodorant prices a can at £2.00; it cost the retailer £1.40. What is the, markup as a percentage of the selling price? A)3.0 percent B)30 percent C)70.0 percent D)20.0 percent

Last Answer : B)30 percent

Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Description : Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Last Answer : (B) 25-30

In the total proteins, the percentage of albumin is about (A) 20–40 (B) 30–45 (C) 50–70 (D) 80–90

Description : In the total proteins, the percentage of albumin is about (A) 20–40 (B) 30–45 (C) 50–70 (D) 80–90

Last Answer : Answer : C

The total Glucose in the body is ________ gms. (A) 10–15 (B) 20–30 (C) 40–50 (D) 60–80

Description : The total Glucose in the body is ________ gms. (A) 10–15 (B) 20–30 (C) 40–50 (D) 60–80

Last Answer : B

Average human body contains about __________ percent water by weight. (A) 20 (B) 40 (C) 70 (D) 85

Description : Average human body contains about __________ percent water by weight. (A) 20 (B) 40 (C) 70 (D) 85

Last Answer : (C) 70

The disc angle of a disc plough ranges from? [a] 40-45 degree [b] 30-35 degree [c] 20-25 degree [d] 45-50 degree [e] None of the above

Description : The disc angle of a disc plough ranges from? [a] 40-45 degree [b] 30-35 degree [c] 20-25 degree [d] 45-50 degree [e] None of the above

Last Answer : [a] 40-45 degree

The spacing between the discs in the gang bolt ranges cm for lighy duty and cm heavy -duty harrows i. 15-25 and 25-30 c) 40-45 and 45-50 ii. 20-30 and 30-40. d) 15-25 and 32-36

Description : The spacing between the discs in the gang bolt ranges cm for lighy duty and cm heavy -duty harrows i. 15-25 and 25-30 c) 40-45 and 45-50 ii. 20-30 and 30-40. d) 15-25 and 32-36

Last Answer : 15-25 and 25-30

The amount of benzene present in pure Benzol is about __________ percent. (A) 30 (B) 50 (C) 70 (D) 90

Description : The amount of benzene present in pure Benzol is about __________ percent. (A) 30 (B) 50 (C) 70 (D) 90

Last Answer : (C) 70

The energy dissipated when a car hits a tree at 70 miles per hour is ABOUT how much greater than that dissipated at 50 miles per hour? w) 20 percent x) 40 percent y) 70 percent z) 100 percent

Description : The energy dissipated when a car hits a tree at 70 miles per hour is ABOUT how much greater than that dissipated at 50 miles per hour? w) 20 percent x) 40 percent y) 70 percent z) 100 percent

Last Answer : ANSWER: Z -- 100 PERCENT

Crushing efficiency of a machine ranges between __________ percent. (A) 0.1 to 2 (B) 5 to 10 (C) 20 to 25

Description : Crushing efficiency of a machine ranges between __________ percent. (A) 0.1 to 2 (B) 5 to 10 (C) 20 to 25

Last Answer : (A) 0.1 to 2

Percent reduction in yield in case of onion due to weeds is a). 20-30 b). 30-35 c). 60-70 d).15-20

Description : Percent reduction in yield in case of onion due to weeds is a). 20-30 b). 30-35 c). 60-70 d).15-20

Last Answer : c). 60-70

The percentage of alumina in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80 %

Description : The percentage of alumina in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80 %

Last Answer : Answer: Option B

Percentage of silica in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80

Description : Percentage of silica in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80

Last Answer : Answer: Option C

The normal values of over flow rates for secondary sedimentation tanks, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 10,000 litres/sqm/day

Description : The normal values of over flow rates for secondary sedimentation tanks, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 10,000 litres/sqm/day

Last Answer : ANS: A

Elastomeric bearings are made of natural or synthetic rubber of shore hardness of approximately. a) 30 to 40 b) 50 to 70* c) 40 to 50 d) 60 to 70

Description : Elastomeric bearings are made of natural or synthetic rubber of shore hardness of approximately. a) 30 to 40 b) 50 to 70* c) 40 to 50 d) 60 to 70

Last Answer : b) 50 to 70

A girl covered a definite distance at same speed. Had she moved 6 km/hr faster, she would have taken 30 mins less. If she had moved 4 km/hr slower, she would have taken 30 mins more. The distance (in km) is. a) 50 b) 40 c) 70 d) 60

Description : A girl covered a definite distance at same speed. Had she moved 6 km/hr faster, she would have taken 30 mins less. If she had moved 4 km/hr slower, she would have taken 30 mins more. The distance (in km) is. a) 50 b) 40 c) 70 d) 60

Last Answer : D Let distance = x km Rate = y km/hr x/y - x / (y+6) = 30/60 (x(y+6)-xy) / y(y+6) = ½ (xy +6x - xy) / y(y+6) = ½ 12x = y(y+6) ------------>1 And x/ (y-4) - x/y = 30/60 (Xy - x(y-4 ... = (y+6) / (y-4) 3y - 12 = 2y +12 Y = 24km Put y value in 1 we get 12x = 24 (24+6) 12x = 24 *30 X=60km

The optimum moisture content in solids to be crushed/ground ranges from __________ percent. (A) 3 to 4 (B) 8 to 10 (C) 10 to 15 (D) 15 to 20

Description : The optimum moisture content in solids to be crushed/ground ranges from __________ percent. (A) 3 to 4 (B) 8 to 10 (C) 10 to 15 (D) 15 to 20

Last Answer : (A) 3 to 4

P2O5 content in triple superphosphate is about __________ percent. (A) 42-50 (B) 15-20 (C) 85-90 (D) 70-75

Description : P2O5 content in triple superphosphate is about __________ percent. (A) 42-50 (B) 15-20 (C) 85-90 (D) 70-75

Last Answer : (A) 42-50

P2O5 content in superphosphate is about __________ percent. (A) 30-35 (B) 15-20 (C) 65-70 (D) 85-90

Description : P2O5 content in superphosphate is about __________ percent. (A) 30-35 (B) 15-20 (C) 65-70 (D) 85-90

Last Answer : (B) 15-20

Total assembly segments in Delhi are : (1) 50 (2) 60 (3) 70 (4) 40

Description : Total assembly segments in Delhi are : (1) 50 (2) 60 (3) 70 (4) 40

Last Answer : (3) 70 Explanation: There are 70 assembly segments in Delhi. In accordance with the recommendations of the Balakrishnan Committee, the Parliament passed the Constitution (69th Amendment) Act, 1991, which ... and 239 AB in the Constitution providing, inter alia, for a Legislative Assembly for Delhi.

Anitha travels 400 km by bus at 70 km/hr, 600 km by train at 80km/hr, 250 km by bike at 60 km/hr and 50 kn by car at 40 km/hr. what is the average speed for the total distance? a) 68.45 b) 69.45 c) 67.45 d) 69.77

Description : Anitha travels 400 km by bus at 70 km/hr, 600 km by train at 80km/hr, 250 km by bike at 60 km/hr and 50 kn by car at 40 km/hr. what is the average speed for the total distance? a) 68.45 b) 69.45 c) 67.45 d) 69.77

Last Answer : D Total distance = (400+250+50+600)km =1300 km Total time taken = (400/70 + 600/80+250/60+50/40) hrs =(40/7 +60/8+25/6+5/4) =(24*40)+(21*60)+(28*25)+(42*5) / 168 =960+1260+700+210 / 168 =(3130 / 168) Average speed =(1300*168 / 3130) km/hr =218400/3130 =69.77 km/hr

Maximum production start up cost for making a chemical plant operational is about __________ percent of the fixed capital cost. (A) 1 (B) 5 (C) 10 (D) 30

Description : Maximum production start up cost for making a chemical plant operational is about __________ percent of the fixed capital cost. (A) 1 (B) 5 (C) 10 (D) 30

Last Answer : (C) 10

Which of the following statements regarding cash flow patterns (for time periods 0, 1, 2, 3, and 4) is correct? A. The sequence of -Rs.100, Rs.50, Rs.40, Rs.60, and Rs.50 is a non-conventional cash flow pattern B. The sequence of -Rs.100, Rs.600, -Rs.1,100, Rs.600, and Rs.20 potentially has a maximum of two internal rates of return. C. The sequence of +Rs.100, -Rs.1,100, and Rs.1,600 is a conventional cash flow pattern. D. The sequence of -Rs.50, Rs.50, Rs.70, Rs.60, and -Rs.150 potentially has at most two internal rates of return.

Description : Which of the following statements regarding cash flow patterns (for time periods 0, 1, 2, 3, and 4) is correct? A. The sequence of -Rs.100, Rs.50, Rs.40, Rs.60, and Rs.50 is a non-conventional cash ... -Rs.50, Rs.50, Rs.70, Rs.60, and -Rs.150 potentially has at most two internal rates of return.

Last Answer : B. The sequence of -Rs.100, Rs.600, -Rs.1,100, Rs.600, and Rs.20 potentially has a maximum of two internal rates of return.

Transmission voltage of ll kV is normally used for distances upto (a) 20—25 km (b) 40—50 km (c) 60—70 km (d) 80—100 km

Description : Transmission voltage of ll kV is normally used for distances upto (a) 20—25 km (b) 40—50 km (c) 60—70 km (d) 80—100 km

Last Answer : (a) 20—25 km

Octane number of petrol normally used in petrol engines is of the order of a. 20-30 b. 40-60 c. 60-70 d. 80-90

Description : Octane number of petrol normally used in petrol engines is of the order of a. 20-30 b. 40-60 c. 60-70 d. 80-90

Last Answer : ANSWER d. 80-90

Standard disc Plough consists of steel disc of _ diameter a) 20 to 40 cm. c) 60 to 90 cm b) 30 to 60 cm. d) 70 to 100 cm

Description : Standard disc Plough consists of steel disc of _ diameter a) 20 to 40 cm. c) 60 to 90 cm b) 30 to 60 cm. d) 70 to 100 cm

Last Answer :  60 to 90 cm

Permanent loss in a Venturimeter is about __________ percent of the pressure drop in the upstream cone. (A) 1 (B) 10 (C) 40 (D) 70

Description : Permanent loss in a Venturimeter is about __________ percent of the pressure drop in the upstream cone. (A) 1 (B) 10 (C) 40 (D) 70

Last Answer : (B) 10

Paper grade bamboo contains about __________ percent cellulose. (A) 5 (B) 20 (C) 40 (D) 60

Description : Paper grade bamboo contains about __________ percent cellulose. (A) 5 (B) 20 (C) 40 (D) 60

Last Answer : (A) 5

Thermal efficiency of blast furnace stoves used for heating blast (air) may be about __________ percent. (A) 20 (B) 40 (C) 60 (D) 80

Description : Thermal efficiency of blast furnace stoves used for heating blast (air) may be about __________ percent. (A) 20 (B) 40 (C) 60 (D) 80

Last Answer : (D) 80

Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25

Description : Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25

Last Answer : (B) 60-65

The normal value of over flow rates for plain primary sedimentation tanks, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 100,000 litres/sqm/day

Description : The normal value of over flow rates for plain primary sedimentation tanks, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 100,000 litres/sqm/day

Last Answer : ANS: B

The normal values of over flow rates for sedimentation tanks using coagulant, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 100,000 litres/sqm/day

Description : The normal values of over flow rates for sedimentation tanks using coagulant, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 100,000 litres/sqm/day

Last Answer : ANS: C

Total sales is Rs. 7,60,000, cash sales Rs. 30,000 collection period is 25 days, debtors at Balance Sheet date will be– (A) Rs. 80,000 (B) Rs. 70,000 (C) Rs. 60,000 (D) Rs. 50,000

Description : Total sales is Rs. 7,60,000, cash sales Rs. 30,000 collection period is 25 days, debtors at Balance Sheet date will be– (A) Rs. 80,000 (B) Rs. 70,000 (C) Rs. 60,000 (D) Rs. 50,000

Last Answer : Answer: Rs. 50,000

Calculate the prime cost from the following information: Direct material purchased: Rs. 1,00,000 Direct material consumed: Rs. 90,000 Direct labour: Rs. 60,000 Direct expenses: Rs. 20,000 Manufacturing overheads: Rs. 30,000 (a) Rs. 1,80,000 (b) Rs. 2,00,000 (c) Rs. 1,70,000 (d) Rs. 2,10,000

Description : Calculate the prime cost from the following information: Direct material purchased: Rs. 1,00,000 Direct material consumed: Rs. 90,000 Direct labour: Rs. 60,000 Direct expenses: Rs. 20,000 Manufacturing overheads: Rs. 30,000 (a) Rs. 1,80,000 (b) Rs. 2,00,000 (c) Rs. 1,70,000 (d) Rs. 2,10,000

Last Answer : (c) Rs. 1,70,000

The incomes of A and B are in the ratio 1 : 2 and their expenditures are in the ratio 2 : 5. If A saves Rs 20,000 and B saves Rs 35,000, what is the total income of A and B? A) Rs 30,000 B) Rs 70,000 C) Rs 90,000 D) Rs 60,000 E) Rs 80,000

Description : The incomes of A and B are in the ratio 1 : 2 and their expenditures are in the ratio 2 : 5. If A saves Rs 20,000 and B saves Rs 35,000, what is the total income of A and B? A) Rs 30,000 B) Rs 70,000 C) Rs 90,000 D) Rs 60,000 E) Rs 80,000

Last Answer : Answer: C Income of A = x, of B = 2x Expenditure of A = 2y, of B = 5y Savings is (income – expenditure). So x – 2y = 20,000 2x – 5y = 35,000 Solve the equations, x = 30,000 So total = x+2x = 3x = 3*30,000 = 90,000

Shatter index of metallurgical coke on 2 inches and 0.5 inch screen should be respectively around __________ percent. (A) 80 and 97 (B) 95 and 100 (C) 40 and 70 (D) 25 and 97

Description : Shatter index of metallurgical coke on 2 inches and 0.5 inch screen should be respectively around __________ percent. (A) 80 and 97 (B) 95 and 100 (C) 40 and 70 (D) 25 and 97

Last Answer : (A) 80 and 97

In gram nipping is done at — DAS a. 10 to 20 b. 5 to 10 c. 30 to 40 d. 50 to 60

Description : In gram nipping is done at — DAS a. 10 to 20 b. 5 to 10 c. 30 to 40 d. 50 to 60

Last Answer : c. 30 to 40