For structural analysis, Maxwell's reciprocal theorem can be applied to: (A) Plastic structures (B) Elastic structures (C) Symmetrical structures (D) All the above

For structural analysis, Maxwell's reciprocal theorem can be applied to:
(A) Plastic structures
(B) Elastic structures
(C) Symmetrical structures
(D) All the above
by

1 Answer

Answer :

(B) Elastic structures
by

Related questions

For structural analysis of forces, the method refers to (A) Moment-area-theorem (B) Three-moment equation (C) Maxwell's reciprocal theorem (D) None of these

Description : For structural analysis of forces, the method refers to  (A) Moment-area-theorem  (B) Three-moment equation  (C) Maxwell's reciprocal theorem  (D) None of these

Last Answer : (A) Moment-area-theorem 

If the vapour pressure at two temperatures of a solid phase in equilibrium with its liquid phase are known, then the latent heat of fusion can be calculated by the (A) Maxwell's equation (B) Clausius-Clapeyron Equation (C) Van Laar equation (D) Nernst Heat Theorem

Description : If the vapour pressure at two temperatures of a solid phase in equilibrium with its liquid phase are known, then the latent heat of fusion can be calculated by the (A) Maxwell's equation (B) Clausius-Clapeyron Equation (C) Van Laar equation (D) Nernst Heat Theorem

Last Answer : B) Clausius-Clapeyron Equation

"At the absolute zero temperature, the entropy of every perfectly crystalline substance becomes zero". This follows from the (A) Third law of thermodynamics (B) Second law of thermodynamics (C) Nernst heat theorem (D) Maxwell's relations

Description : "At the absolute zero temperature, the entropy of every perfectly crystalline substance becomes zero". This follows from the (A) Third law of thermodynamics (B) Second law of thermodynamics (C) Nernst heat theorem (D) Maxwell's relations

Last Answer : (A) Third law of thermodynamics

Terzaghi's analysis assumes: (A) Soil is homogeneous and isotropic (B) Elastic zone has straight boundaries inclined at = to the horizontal and plastic zones fully developed (C) Failure zones do not extend above the horizontal plane through the base of the footing (D) All the above

Description : Terzaghi's analysis assumes: (A) Soil is homogeneous and isotropic (B) Elastic zone has straight boundaries inclined at = to the horizontal and plastic zones fully developed (C) Failure zones do not extend above the horizontal plane through the base of the footing (D) All the above

Last Answer : Answer: Option D

In the virtual work method of plastic analysis of steel structures, the virtual quantity is (a) Slope (b) Moment (c) Load (d) Displacement

Description : In the virtual work method of plastic analysis of steel structures, the virtual quantity is (a) Slope (b) Moment (c) Load (d) Displacement

Last Answer : (d) Displacement

The branching of alkanes that produces symmetrical structures : (a) raises the boiling point ; raises the melting point (b) raises the boiling point ; lowers the melting point (c) lowers the boiling point ; lowers the melting point (d) lowers the boiling point ; raises the melting point

Description : The branching of alkanes that produces symmetrical structures : (a) raises the boiling point ; raises the melting point (b) raises the boiling point ; lowers the melting point (c) lowers the boiling point ; lowers the melting point (d) lowers the boiling point ; raises the melting point

Last Answer : raises the boiling point ; raises the melting point

Castigliano's first theorem is applicable (A) For statically determinate structures only (B) When the system behaves elastically (C) Only when principle of superposition is valid(D) None of the above

Description : Castigliano's first theorem is applicable (A) For statically determinate structures only (B) When the system behaves elastically (C) Only when principle of superposition is valid (D) None of the above

Last Answer : (C) Only when principle of superposition is valid

The Castigliano's second theorem can be used to compute deflections (A) In statically determinate structures only (B) For any type of structure (C) At the point under the load only (D) For beams and frames only

Description : The Castigliano's second theorem can be used to compute deflections (A) In statically determinate structures only (B) For any type of structure (C) At the point under the load only (D) For beams and frames only

Last Answer : (B) For any type of structure

Sinking fund is (A) The fund for rebuilding a structure when its economic life is over (B) Raised to meet maintenance costs (C) The total sum to be paid to the municipal authorities by the tenants (D) A part of the money kept in reserve for providing additional structures and structural modifications

Description : Sinking fund is (A) The fund for rebuilding a structure when its economic life is over (B) Raised to meet maintenance costs (C) The total sum to be paid to the municipal ... tenants (D) A part of the money kept in reserve for providing additional structures and structural modifications

Last Answer : (A) The fund for rebuilding a structure when its economic life is over

Muller Breslau's principle for obtaining influence lines is applicable to (i) Trusses (ii) Statically determinate beams and frames (iii) Statically indeterminate structures, the material of which is elastic and follows Hooke's law (iv) Any statically indeterminate structure The correct answer is (A) (i), (ii) and (iii) (B) (i), (ii) and (iv) (C) (i) and (ii) (D) Only (i)

Description : Muller Breslau's principle for obtaining influence lines is applicable to (i) Trusses (ii) Statically determinate beams and frames (iii) Statically indeterminate structures, the material of which is elastic and follows Hooke's law (iv ... B) (i), (ii) and (iv) (C) (i) and (ii) (D) Only (i)

Last Answer : (A) (i), (ii) and (iii)

A time varying electric field produces a magnetic field.' This phenomenon is called: (A) Hertz's law (B) Ampere Maxwell's law (C) Faraday's law

Description : A time varying electric field produces a magnetic field.' This phenomenon is called: (A) Hertz's law (B) Ampere Maxwell's law (C) Faraday's law

Last Answer : Answer: Option B

Lacquer paints (A) Are generally applied on structural steel (B) Are less durable as compared to enamel paints (C) Consist of resin and nitro-cellulose (D) All the above

Description : Lacquer paints (A) Are generally applied on structural steel (B) Are less durable as compared to enamel paints (C) Consist of resin and nitro-cellulose (D) All the above

Last Answer : Answer: Option D

The principle of virtual work can be applied to elastic system by considering the virtual work of (A) Internal forces only (B) External forces only (C) Internal as well as external forces (D) None of the above

Description : The principle of virtual work can be applied to elastic system by considering the virtual work of (A) Internal forces only (B) External forces only (C) Internal as well as external forces (D) None of the above

Last Answer : (C) Internal as well as external forces

At yield point of a test piece, the material (A) Obeys Hooke's law (B) Behaves in an elastic manner (C) Regains its original shape on removal of the load(D) Undergoes plastic deformation

Description : At yield point of a test piece, the material  (A) Obeys Hooke's law  (B) Behaves in an elastic manner  (C) Regains its original shape on removal of the load  (D) Undergoes plastic deformation 

Last Answer : (D) Undergoes plastic deformation 

Every material obeys the Hooke's law within its (A) Elastic limit (B) Plastic point (C) Limit of proportionality (D) None of these

Description : Every material obeys the Hooke's law within its (A) Elastic limit (B) Plastic point (C) Limit of proportionality (D) None of these

Last Answer : (C) Limit of proportionality

A member which does not regain its original shape after removed of load producing deformation is said (A) Plastic (B) Elastic (C) Rigid (D) None of these

Description : A member which does not regain its original shape after removed of load producing deformation is said (A) Plastic (B) Elastic (C) Rigid (D) None of these

Last Answer : (A) Plastic

The stress at which extension of a material takes place more quickly as compared to the increase in load, is called (A) Elastic point (B) Plastic point (C) Breaking point (D) Yielding point

Description : The stress at which extension of a material takes place more quickly as compared to the increase in load, is called (A) Elastic point (B) Plastic point (C) Breaking point (D) Yielding point

Last Answer : (D) Yielding point

Cohesive soils are generally (A) Plastic and also compressible (B) Elastic and also compressible (C) Plastic but incompressible (D) None of these

Description : Cohesive soils are generally (A) Plastic and also compressible (B) Elastic and also compressible (C) Plastic but incompressible (D) None of these

Last Answer : (A) Plastic and also compressible

Which of the following conditions is to be satisfied both in elastic and plastic analyses? (a) Equilibrium condition (b) Yield condition (c ) Plastic moment condition (d) Mechanism condition

Description : Which of the following conditions is to be satisfied both in elastic and plastic analyses? (a) Equilibrium condition (b) Yield condition (c ) Plastic moment condition (d) Mechanism condition

Last Answer : (a) Equilibrium condition

The material in which large deformation is possible before absolute failure by rupture takes place, is known as (a) Ductile (b) Plastic (c) Brittle (d) Elastic

Description : The material in which large deformation is possible before absolute failure by rupture takes place, is known as (a) Ductile (b) Plastic (c) Brittle (d) Elastic

Last Answer : Ductile

Select incorrect statement from the following. In the Virtual work method, it is generally assumed that [ A ] Elastic deformations in the slab are negligible [ B ] Plastic deformations in the slab are negligible [ C ] Plastic deformations takes place at the yield lines [ D ] Both (a) and (b)

Description : Select incorrect statement from the following. In the Virtual work method, it is generally assumed that [ A ] Elastic deformations in the slab are negligible [ B ] Plastic deformations in the slab are negligible [ C ] Plastic deformations takes place at the yield lines [ D ] Both (a) and (b)

Last Answer : [ B ] Plastic deformations in the slab are negligible

Creep coefficient is the ratio of [ A ] Ultimate Creep strain to elastic strain [ B ] Elastic strain to ultimate Creep strain [ C ] Elastic strain to plastic strain [ D ] Plastic strain to elastic strain

Description : Creep coefficient is the ratio of [ A ] Ultimate Creep strain to elastic strain [ B ] Elastic strain to ultimate Creep strain [ C ] Elastic strain to plastic strain [ D ] Plastic strain to elastic strain

Last Answer : [ A ] Ultimate Creep strain to elastic strain

What are the shortcomings of grillage analysis which is commonly used in structural analysis of bridges?

Description : What are the shortcomings of grillage analysis which is commonly used in structural analysis of bridges?

Last Answer : Grillage analysis suffers from the following shortcomings based on E. C. Hambly: (i) For coarse mesh, torques may not be identical in orthogonal directions. Similarly, twists may differ in ... moment in an element depends on the curvatures in the beam's direction and its orthogonal direction.

In the displacement method of structural analysis, the basic unknowns are (A) Displacements (B) Force (C) Displacements and forces (D) None of the above

Description : In the displacement method of structural analysis, the basic unknowns are (A) Displacements (B) Force (C) Displacements and forces (D) None of the above

Last Answer : (A) Displacements

Which of the following methods of structural analysis is a displacement method? (A) Moment distribution method (B) Column analogy method (C) Three moment equation (D) None of the above

Description : Which of the following methods of structural analysis is a displacement method? (A) Moment distribution method (B) Column analogy method (C) Three moment equation (D) None of the above

Last Answer : (A) Moment distribution method

Which of the following methods of structural analysis is a force method? (A) Slope deflection method (B) Column analogy method (C) Moment distribution method (D) None of the above

Description : Which of the following methods of structural analysis is a force method? (A) Slope deflection method (B) Column analogy method (C) Moment distribution method (D) None of the above

Last Answer : (B) Column analogy method

The moment-distribution method in structural analysis falls in the category of (a) Displacement method (b) Force method (c) Flexibility method (d) First order approximate method

Description : The moment-distribution method in structural analysis falls in the category of (a) Displacement method (b) Force method (c) Flexibility method (d) First order approximate method

Last Answer : (a) Displacement method

For filling cracks in masonry structures, the type of bitumen used, is (A) Cut-back bitumen (B) Bitumen-emulsion (C) Blown bitumen (D) Plastic bitumen

Description : For filling cracks in masonry structures, the type of bitumen used, is (A) Cut-back bitumen (B) Bitumen-emulsion (C) Blown bitumen (D) Plastic bitumen

Last Answer : Answer: Option D

Steel Beam theory is the method of analysis and a design of [ A ] Singly reinforced sections [ B ] Doubly reinforced sections [ C ] Both (a) and (b) [ D ] Steel structures only

Description : Steel Beam theory is the method of analysis and a design of [ A ] Singly reinforced sections [ B ] Doubly reinforced sections [ C ] Both (a) and (b) [ D ] Steel structures only

Last Answer : [ B ] Doubly reinforced sections

Steel Beam theory is the method of analysis and a design of [ A ] Singly reinforced sections [ B ] Doubly reinforced sections [ C ] Both (a) and (b) [ D ] Steel structures only

Description : Steel Beam theory is the method of analysis and a design of [ A ] Singly reinforced sections [ B ] Doubly reinforced sections [ C ] Both (a) and (b) [ D ] Steel structures only

Last Answer : [ B ] Doubly reinforced sections

Compounds with identical molecular formula but different structures are called - (1) Tetravalent compounds (2) Structural isomers (3) Covalent compounds (4) None of the above

Description : Compounds with identical molecular formula but different structures are called - (1) Tetravalent compounds (2) Structural isomers (3) Covalent compounds (4) None of the above

Last Answer : (2) Structural isomers Explanation: Structures with identical molecular formula but different structures are called structural isomers. Eg: Butane.

What body structures are composed of elastic connective tissue?

Description : What body structures are composed of elastic connective tissue?

Last Answer : Need answer

State superposition theorem applied to D.C. circuits.

Description : State superposition theorem applied to D.C. circuits.

Last Answer : Superposition Theorem applied to D.C. circuits: Superposition theorem states that in any linear, bilateral, multisource network, the response (voltage across any element or current through any ... each source acting alone, while the other sources are replaced by their internal resistances.

Thevenin’s theorem can be applied to network containing...

Description : Thevenin’s theorem can be applied to network containing : (A) Passive elements only (B) Active elements only (C) Linear elements only (D) All of these

Last Answer : C

Superposition theorem can be applied only to circuits having?

Description : Superposition theorem can be applied only to circuits having?

Last Answer : Superposition theorem can be applied only to circuits having linear bilateral elements.

Superposition theorem can be applied to?

Last Answer : Thesuperposition theoremforelectrical circuitsstates that for a linear system the response (voltageorcurrent) in any branch of a bilaterallinear circuithaving more than one independent source equals the ... alone, where all the other independent sources are replaced by their internalimpedances.

Select the correct statement (A) Flexibility matrix is a square symmetrical matrix (B) Stiffness matrix is a square symmetrical matrix (C) Both (A) and (B) (D) None of the above

Description : Select the correct statement (A) Flexibility matrix is a square symmetrical matrix (B) Stiffness matrix is a square symmetrical matrix (C) Both (A) and (B) (D) None of the above

Last Answer : (C) Both (A) and (B

For a symmetrical two hinged parabolic arch, if one of the supports settles horizontally, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero

Description : For a symmetrical two hinged parabolic arch, if one of the supports settles horizontally, then the horizontal thrust (A) Is increased (B) Is decreased (C) Remains unchanged (D) Becomes zero

Last Answer : (B) Is decreased

Frequency distribution curves (A) Having a single lump, are called uninodal curves (B) If symmetrical, are called normal curves (C) If not symmetrical, are called skew curves (D) All the above

Description : Frequency distribution curves (A) Having a single lump, are called uninodal curves (B) If symmetrical, are called normal curves (C) If not symmetrical, are called skew curves (D) All the above

Last Answer : (D) All the above

In plastic analysis, the shape factor for a circular section, is (A) 1.5 (B) 1.6 (C) 1.7 (D) 1.75

Description : In plastic analysis, the shape factor for a circular section, is  (A) 1.5  (B) 1.6  (C) 1.7  (D) 1.75 

Last Answer : (C) 1.7 

In plastic analysis, the shape factor for a triangular section, is (A) 1.5 (B) 1.34 (C) 2.34 (D) 2.5

Description : In plastic analysis, the shape factor for a triangular section, is  (A) 1.5  (B) 1.34  (C) 2.34  (D) 2.5 

Last Answer : (C) 2.34 

In plastic analysis, the shape factor for rectangular section, is (A) 1.4 (B) 1.5 (C) 1.6 (D) 1.7

Description : In plastic analysis, the shape factor for rectangular section, is  (A) 1.4  (B) 1.5  (C) 1.6  (D) 1.7

Last Answer : (B) 1.5 

When will we see Ghislaine Maxwell's list?

Description : When will we see Ghislaine Maxwell's list?

Last Answer : We won’t!!! She said that SHE would no longer fight to keep the list private. She said NOTHING about the people on the list stopping it from becoming public knowledge. Somebody’s pockets are being lined even as we speak!!!

Which one of the following laws will not contribute to the Maxwell’s equations? a) Gauss law b) Faraday law c) Ampere law d) Curie Weiss law

Description : Which one of the following laws will not contribute to the Maxwell’s equations? a) Gauss law b) Faraday law c) Ampere law d) Curie Weiss law

Last Answer : d) Curie Weiss law

In which of the following forms can Maxwell’s equation not be represented? a) Static b) Differential c) Integral d) Harmonic

Description : In which of the following forms can Maxwell’s equation not be represented? a) Static b) Differential c) Integral d) Harmonic

Last Answer : a) Static

Maxwell's relation corresponding to the identity, dH = dS = Vdp + ∑μi dni is (A) (∂T/∂V)S, ni = -(∂P/∂S)V, ni (B) (∂S/∂P)T, ni = (∂V/∂T)P, ni (C) (∂S/∂V)T, ni = (∂P/∂T)V, ni (D) (∂T/∂P)S, ni = (∂V/∂S)P, ni

Description : Maxwell's relation corresponding to the identity, dH = dS = Vdp + ∑μi dni is (A) (∂T/∂V)S, ni = -(∂P/∂S)V, ni (B) (∂S/∂P)T, ni = (∂V/∂T)P, ni (C) (∂S/∂V)T, ni = (∂P/∂T)V, ni (D) (∂T/∂P)S, ni = (∂V/∂S)P, ni

Last Answer : (D) (∂T/∂P)S, ni = (∂V/∂S)P, ni

The four properties of a system viz. P, V, T, S are related by __________ equation. (A) Gibbs-Duhem (B) Gibbs-Helmholtz (C) Maxwell's (D) None of these

Description : The four properties of a system viz. P, V, T, S are related by __________ equation. (A) Gibbs-Duhem (B) Gibbs-Helmholtz (C) Maxwell's (D) None of these

Last Answer : (C) Maxwell's

Variation of equilibrium pressure with temperature for any two phases of a given substances is given by the __________ equation. (A) Gibbs-Duhem (B) Maxwell's (C) Clapeyron (D) None of these

Description : Variation of equilibrium pressure with temperature for any two phases of a given substances is given by the __________ equation. (A) Gibbs-Duhem (B) Maxwell's (C) Clapeyron (D) None of these

Last Answer : (C) Clapeyron

The equation relating E, P, V and T which is true for all substances under all conditions is given by (∂E/∂V)T = T(∂P/∂T)H - P. This equation is called the (A) Maxwell's equation (B) Thermodynamic equation of state (C) Equation of state (D) Redlich-Kwong equation of state

Description : The equation relating E, P, V and T which is true for all substances under all conditions is given by (∂E/∂V)T = T(∂P/∂T)H - P. This equation is called the (A) Maxwell's equation (B) Thermodynamic equation of state (C) Equation of state (D) Redlich-Kwong equation of state

Last Answer : (B) Thermodynamic equation of state