State superposition theorem applied to D.C. circuits.

1 Answer

Answer :

Superposition Theorem applied to D.C. circuits: Superposition theorem states that in any linear, bilateral, multisource network, the response (voltage across any element or current through any element) of any branch is equal to the algebraic sum of the responses produced in it with each source acting alone, while the other sources are replaced by their internal resistances.

Related questions

Description : State Superposition Theorem.

Last Answer : Superposition Theorem: In any linear, bilateral, multisource network the voltage across or the current through any branch is given by algebraic sum of all individual voltages or currents caused ... sources acting alone with all other sources replaced by their internal resistances if any.

Description : Superposition theorem can be applied only to circuits having?

Last Answer : Superposition theorem can be applied only to circuits having linear bilateral elements.

Description : The superposition theorem requires as many circuits to be solved as there are?

Last Answer : The superposition theorem requires as many circuits to be solved as there are sources.

Description : The superposition theorem is based on the concept of ?

Last Answer : The superposition theorem is based on the concept of Linearity.

Description : Which of the following statements is incorrect ? (A) Superposition theorem is useful for Linear and Non-linear circuit analysis when several sources are present in the circuit. (B) ... purely resistive, maximum power transfer is achieved under the condition : Load Resistance = Source Resistance

Last Answer : Which of the following statements is incorrect ? (A) Superposition theorem is useful for Linear and Non-linear circuit analysis when several sources are present in the circuit. ... purely resistive, maximum power transfer is achieved under the condition : Load Resistance = Source Resistance

Description : The superposition theorem is applicable to?

Last Answer : The superposition theorem is applicable to linear responses only.

Description : The concept on which Superposition theorem is based is?

Last Answer : The concept on which Superposition theorem is based is linearity.

Description : State Thevenin’s Theorem.

Last Answer : Any two terminal circuit having number of linear impedances and sources (voltage, current, dependent, independent) can be represented by a simple equivalent circuit consisting of a single voltage ... circuit across the two terminals, when the sources are replaced by their internal impedances. 

Description : State maximum power transfer theorem for DC circuit.

Last Answer : Maximum power transfer theorem for DC circuit: The maximum power transfer theorem states that the source or a network transfers maximum power to load only when the load resistance is equal ... removed (disconnected) ii) All internal independent sources are replaced by their internal resistances.

Description : Which capacitors are suitable for DC filter circuits?

Last Answer : Electrolytic capacitors are suitable for DC filter circuits.

Description : State the Thevenin’s theorem. Also write stepwise procedure for applying Thevenin’s theorem to simple circuits.

Last Answer : Thevenin's Theorem: Any two terminal circuit having number of linear impedance and sources (voltage, current, dependent, independent) can be represented by a simple equivalent circuit consisting of a single voltage ... 's equivalent circuit: Step V: Determination of Load current:

Description : Superposition 

Last Answer : Superposition 1 : https://youtu.be/3C3daEzmtuM Superposition 2 : https://youtu.be/mURACJC2jAU Superposition 3 : https://youtu.be/nG715RGdsvk Superposition 4 : https://youtu.be/qCHpYc8tOUs ... Superposition 9 : https://youtu.be/8cA91sqz2AI Superposition 10 : https://youtu.be/2nYcmOtRmaY

Description : State the modification to be done in dc series motor to work satisfactorily as ac series motor. State applications of ac series motor.

Last Answer : Modifications are necessary in a dc series motor so that it operates satisfactorily on ac supply. The modifications are as follows:  1) AC series motor is built with a few field turns as ... and grinders 5) High speed vacuum cleaners 6) Sewing machines 7) Food processors 8) Drilling machine 

Description : Maximum Power Transfer Theorem 1

Last Answer : Maximum Power Transfer Theorem 1

Description : Write the steps for finding the current through an element by Thevenin’s theorem.

Last Answer : Steps to find Thevenin's equivalent circuit, taking an example is as follows:  1. From the given circuit (fig.a),Remove RL from the terminals A and B and redraw the circuit as shown in ... (fig.d)from where it was temporarily removed earlier.  Current flowing through RL is given by 

Description : Can you apply Thevenin's theorem in an AC circuit?

Last Answer : It  can  be  applied  to  AC  circuits

Description : State two advantages of digital circuits.

Last Answer : Advantages of Digital Circuits: i) Digital circuits are easier to design. ii) Information storage is easy. iii) Accuracy and precision are greater. iv) Less affected by noise. v) Reliability is more

Description : As per Shannon’s channel capacity theorem, if samples are transmitted in ‘T’ seconds over a noisy channel which is bandlimited to ‘B’ Hz. The number of samples ‘n’ is given by (symbols/notations carry their usual meaning) A) B/T B) T/B C) 2BT D) BT/2 

Last Answer : As per Shannon’s channel capacity theorem, if samples are transmitted in ‘T’ seconds over a noisy channel which is bandlimited to ‘B’ Hz. The number of samples ‘n’ is given by ( ... /notations carry their usual meaning) A) B/T B) T/B C) 2BT D) BT/2 

Description : Millman's theorem yields equivalent  (1) Impedance or Resistance (3) Voltage source (2) Current source (4) Voltage or Current source

Last Answer : Millman's theorem yields equivalent Voltage or Current source

Description : Norton’s theorem states that a complex network connected to a load can be replaced with an equivalent impedance (A) in series with a current source (B) in parallel with a voltage source (C) in series with a voltage source (D) in parallel with a current source

Last Answer : in parallel qith current source

Description : While calculating Rth in Thevenin's theorem and Norton equivalent?

Last Answer : While calculating Rth in Thevenin's theorem and Norton equivalent all independent sources are made dead.

Description : In Thevenin's theorem, to find Z?

Last Answer : In Thevenin's theorem, to find Z all independent voltage sources are short circuited and all independent current sources are open circuited.

Description : Millman's theorem yields?

Last Answer : Millman's theorem yields equivalent voltage or current source.

Description : Application of Norton's theorem to a circuit yields?

Last Answer : Application of Norton's theorem to a circuit yields equivalent current source and impedance in series.

Last Answer : According to Lami's theorem if three forces acting at a point are in equilibrium, each force is proportional to the sine of the angle between the other two.

Description : Series rc circuits

Last Answer : Series rc circuits

Description : Circuits with XL Alone

Last Answer : Circuits with XL Alone X L values in series let two inductive reactances X L 1 and X L 2 are connected in series and has value 50 ohm and 50 ohm respectively. 100 volts A C ... phasor. And it is taken horizontal. Phase angle between inductive current and voltage is same 90 degree.

Description : AC Circuits with Resistance but No Reactance

Last Answer : AC Circuits with Resistance but No Reactance AC Circuits with Resistance but No Reactance Series resistances let two resistances R 1 and R 2 are connected in series as shows in figure and there ... voltage. Voltage V A is common to both the branch hence voltage V A is common reference.

Description : Nodal Analysis of Electric Circuits Example

Last Answer : Nodal Analysis of Electric Circuits Example 1 : https://youtu.be/XLS6kDQuHj0 Nodal Analysis of Electric Circuits Example 2 : https://youtu.be/OFhurvl74bA Nodal Analysis of Electric Circuits ... youtu.be/GmOozdjTVtM Nodal Analysis of Electric Circuits Example 9 : https://youtu.be/KjgfjJ7Ubb8

Description : What is the need of polarity marking in polyphase AC circuits?

Last Answer : Need of Polarity Marking in Polyphase AC Circuits: i) Polarity marking of terminals provides reference polarity for better understanding of system, even if the polarity of ac voltage changes ... of current transformers in relay protection circuit and getting desired performance is very difficult.

Description : Which of the following is true at resonance in LC circuits? A) The series impedance of the two elements is at a maximum and the parallel impedance is at minimum B) The series impedance of the ... D) The series impedance of the two elements is at a minimum and the parallel impedance is at maximum

Last Answer : Which of the following is true at resonance in LC circuits? A) The series impedance of the two elements is at a maximum and the parallel impedance is at minimum B) The series impedance of ... D) The series impedance of the two elements is at a minimum and the parallel impedance is at maximum

Description : An air gap is usually inserted in magnetic circuits to?

Last Answer : An air gap is usually inserted in magnetic circuits to prevent saturation.

Description : In AC. circuits, laminated iron is invariably used in order to?

Last Answer : In AC. circuits, laminated iron is invariably used in order to reduce eddy current loss.

Description : State super position theorem. Write steps to find current in an element using super position theorem.

Last Answer : Statement of superposition theorem: In any linear network containing two or more sources, the current in any element is equal to algebraic sum of the current caused by individual source acting ... . Add algebraically the voltage drops and branch currents to obtain combined effect of all sources.

Description : State maximum power transfer theorem. 

Last Answer : The maximum power transfer theorem states that the maximum amount of power will be delivered to the load resistance when the load resistance is equal to the Thevenin/ Norton resistance of the network supplying the power ... draws maximum power. Also find the value of the maximum power.

Description : Basic Op Amp Circuits

Last Answer : In this chapter we will be examining some common uses of op amps. Where Chapter Three focused on the theory of negative feedback in a more abstract way, this chapter zeroes in on the practical ... on using op amps with a single polarity power supply and how to increase the available output current.

Description : Explain the concept of initial and final conditions in switching circuits for elements R and L. 

Last Answer : Concept of Initial and final condition in switching circuits for R:  Consider a resistor is connected to a voltage source, using a switch as shown in fig below The switch is closed ... of value Io in parallel with short circuit.(I0 is the current in inductor just before switching)

Description : Explain with neat diagram series and parallel magnetic circuits. 

Last Answer : Series magnetic circuit: When different magnetic materials having different lengths, cross sectional areas and permeability are connected one after another, in which same flux is established in different sections, then it is called series ... flux, Φ = Φ1 + Φ2  Path 1: BAFE  Path 2: BACD

Description : Compare Asynchronous sequential and synchronous sequential circuits.

Last Answer : SR. NO. ASYNCHRONOUS SEQUENTIAL CIRCUIT SYNCHRONOUS SEQUENTIAL CIRCUITS. 1 Output can be changed at any instant of time by changing the input Output changes at discrete ... the counter change state simultaneously. This is because all the flip-flops are clocked simultaneously.

Description : Which of the following circuits converts any arbitrary waveform into square waveform? A) Hartley oscillator B) Schmitt trigger C) Differentiator D) RC phase shift oscillator 

Last Answer : Which of the following circuits converts any arbitrary waveform into square waveform? A) Hartley oscillator B) Schmitt trigger C) Differentiator D) RC phase shift oscillator 

Description : Asynchronous circuits are usually faster than synchronous circuits because

Last Answer : Asynchronous circuits are usually faster than synchronous circuits because they are free running and do not depend on the frequency of the clock

Description : An a.c series circuit has resistance of 10ohm, inductance of 0.1H and capacitance of 10µf, voltage applied to circuit is 200V. find (i) Resonant frequency (ii) Current at resonance (iii) Power at resonance 

Last Answer : Solution: For RLC series circuit

Description : In application of superposition theorem, one is required to solve as many circuits as there are  1. Nodes 2. Branches 3. Meshes 4. Sources 

Last Answer : In application of superposition theorem, one is required to solve as many circuits as there are Sources 

Last Answer : Thesuperposition theoremforelectrical circuitsstates that for a linear system the response (voltageorcurrent) in any branch of a bilaterallinear circuithaving more than one independent source equals the ... alone, where all the other independent sources are replaced by their internalimpedances.

Description : State condition for resonance in R-L-C series circuit.

Last Answer : The condition for resonance in R-L-C series circuit. i) Inductive Reactance should be equal to capacitive reactance. That is XL = XC ii) The power factor of the circuit is Cos ɸ = 1 iii)The voltage and ... and given by I =V/R. v)Impedance of the circuit is minimum and given by Z =R.

Description : Find the Norton equivalent resistance for the network shown in Fig No. 2

Last Answer : Solution: To find Norton’s equivalent resistance removing voltage source and current source. Voltage source is replaced by short circuit and current source is replaced by open circuit so, we get circuit as

Description : Use mesh analysis to calculate ammeter current in Fig No. 1

Last Answer : Solution:

Description : Two unpedauces given by Z1 = 10 + j5 and Z2 = 8 + j9 are joined in parallel and connected across a voltage of V = 200 + j0. Calculate the circuit current and branch currents. Draw the vector diagram.

Last Answer : Solution: Given, Z1=10+j5, Z2=8+j9, V=200+j0

Description : A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed 

Last Answer : For RC series circuit

Description : Derive an expression for delta to star transformation. 

Last Answer : For delta network the resistance between the terminals 1 and 2 consists of R12 in parallel with  (R23+R31) Hence ,the resistance between the terminals 1 and 2 is In case of star network the ... equation( ii) from( i),we get Adding equations (iii) and( iv),we have