Explain the operation of advanced gas cooled reactor.

Explain the operation of advanced gas cooled reactor.
by

1 Answer

Answer :

Operation:- Carbon dioxide or Helium is the gas used for transferring the heat produced form the reactor core to the Heat exchanger. The gas is pumped through the reactor core at high pressure. In heat exchanger steam is generated at high temperature and high pressure. Cooled gas is drawn from the Heat exchanger and passed in reactor core and cycle is repeated.

OR 

Fuel used in Uranium. Moderator used is Graphite. Coolant used is CO2/Helium. Temperature obtain is 5650C. The AGR was designed to have a high thermal efficiency 40 %. Steam pressure is 162 Kg/cm2 

by

Related questions

Explain the purpose of shielding and reflector in a nuclear reactor.

Description : Explain the purpose of shielding and reflector in a nuclear reactor.

Last Answer : 1. Shielding:-  The function of sheilding is to protect environment, humens and animals from the harmful radioactive radiation (pollution).before they are emitted to atmosphere. Shilding is provided to ... :- The function of reflector is to reflect back the neutrons which are leaving from core.

Explain working of fast breeder reactor.

Description : Explain working of fast breeder reactor.

Last Answer : Fast Breeder Reactor (FBR):  A fast breeder reactor produces heat and at the same time converts fertile material into fissionable material. The central portion of this reactor is a stainless ... or thermal neutrons. In fact no moderator is present at all to slow down the fast neutrons. 

State the function of biological shielding in case of Nuclear Reactor and give material used for it.

Description : State the function of biological shielding in case of Nuclear Reactor and give material used for it.

Last Answer : Function of biological shielding in Nuclear Reactor:  Shielding is provided to absorb alpha, beta particles and gama rays which are produced during nuclear chain reaction (fission process) The ... of Water or concrete wall are provided all around the reactor vessel for stopping neutrons. 

Which of the following is true with respect to a breeder reactor?

Description : Which of the following is true with respect to a breeder reactor? A) Its conversion ratio is greater than 1  B) It is capable of generating more fissile material than it consumes C) Both A and B  D) None of these

Last Answer : Which of the following is true with respect to a breeder reactor? A) Its conversion ratio is greater than 1  B) It is capable of generating more fissile material than it consumes C) Both A and B  D) None of these

Saturated Reactor (SR)

Description : Saturated Reactor (SR)

Last Answer : Saturated Reactor (SR) Saturated reactor is use for controlling reactive power. It consists of reactor and shunt capacitor bank. It is like a magnetic ... called amplification factor. The disadvantage of saturated reactor is its slow response.

Give comparison of BWR and PWR.

Description : Give comparison of BWR and PWR. 

Last Answer : Sr.No.  Points Boiling Water Reactor (BWR) Pressurized Water Reactor (PWR)  1 Construction It consist of reactor vessel & there is no heat exchanger It consist of strong ... 2600c 8 Cooling Light or heavy water  Light or heavy water but under pressure 

Draw and explain integrated duration curve used in system operation.

Description : Draw and explain integrated duration curve used in system operation. 

Last Answer : Diagram of integrated duration curve used in system operation: Explanation:  Integrated duration curve is obtained from load duration curve. It is drawn in between load on Y-axis in KW/MW and the X- ... a particular time of a day can also be shown on a curve which is called as mass curve. 

Draw diagram of class A push-pull amplifier and explain its operation.

Description : Draw diagram of class A push-pull amplifier and explain its operation. 

Last Answer : Class A Push-pull Amplifier: The circuit diagram of class A push-pull amplifier is as shown in the fig.(a). Operation: The resistors R1 and R2 along with Vcc provide the dc biasing so as ... Vcc is applied to the collectors of transistors Q1 and Q2 through the centretapped output transformer. 

What is photodiode? Draw the symbol and explain operation of photodiode.

Description : What is photodiode? Draw the symbol and explain operation of photodiode. 

Last Answer : A photodiode is a light detector that converts light into an electrical current. A photodiode is a semi-conductor device, with a p-n junction and an intrinsic layer between p and n layers ... current is independent of reverse bias voltage. Reverse current is mostly depends on the light intensity.

State principle of operation of piezo-electric transducer. State its application.

Description : State principle of operation of piezo-electric transducer. State its application.

Last Answer : The piezoelectric element used for converting mechanical movement into electric signals. The mechanical deformation generates charges and this charge appears as a voltage across the electrodes.  ... destructive test (NDT) equipments 6. Piezoelectric materials are used in ultrasonic transducers. 

Describe principle of operation of Doppler type ultrasonic flow meter with diagram.

Description : Describe principle of operation of Doppler type ultrasonic flow meter with diagram. 

Last Answer : Diagram: Working:  The flow meter consists of a crystal transducer mounted outside the pipe in which flow is to be measured. This transducer is a piezoelectric crystal which ... , so the frequency of the reflected wave is shifted to particle velocity, according to Doppler principle.

Describe the operation of N channel enhancement type MOSFET with diagram.

Description : Describe the operation of N channel enhancement type MOSFET with diagram.

Last Answer : As its name indicates, this MOSFET operates only in the enhancement mode and has no depletion mode. It operates with large positive gate voltage only. It does not conduct when the ... of charge carriers attracted to the positive gate. Thus drain current is controlled by the gate potential.

Describe operation of N-channel JFET

Description : Describe operation of N-channel JFET

Last Answer : Operation of N-channel JFET  1) When VGS = 0 volt: When a voltage is applied between the drain and source with a DC supply voltage VDD with VGS = 0 V, the electrons flow from source ... to zero. The gate to source voltage at which current reduces to zero is called as pinch-off voltage.

What would happen if a power transformer designed for operation on 50 Hz (frequency) were connected to

Description : What would happen if a power transformer designed for operation on 50 Hz (frequency) were connected to a 500 Hz (frequency) source of the same voltage:  (A) Eddy Current and Hysteresis losses will be ... Current will be too much high  (C) Transformer may start to smoke and burn  (D) No effect

Last Answer : What would happen if a power transformer designed for operation on 50 Hz (frequency) were connected to a 500 Hz (frequency) source of the same voltage:  (A) Eddy Current and Hysteresis losses will be ... will be too much high  (C) Transformer may start to smoke and burn  (D) No effect

With neat sketch explain four modes of operation of a TRIAC?

Description : With neat sketch explain four modes of operation of a TRIAC? 

Last Answer : Modes of operation of a TRIAC: There are four different operating modes of TRIAC:  1) MT2 and gate are positive with respect to terminal MT1(Mode1) : Here terminal MT2 is positive ... junction P2-N2 is forward biased, current carriers are injected and therefore, the TRIAC is turned on. 

What is PLL? Explain its operation with a block diagram.

Description : What is PLL? Explain its operation with a block diagram.

Last Answer : PLL - A phase-locked loop or phase lock loop is a control system that generates an output signal whose phase is related to the phase of an input signal Block diagram  ... to the input frequency. The phase - locked loop goes through three states free running capture and phase lock.

Draw & explain operation of phase detector.

Description : Draw & explain operation of phase detector.

Last Answer : In phase detector, the op-Amp basically acts as a zero crossing detector. If a sine wave is applied at the i/p, we get square wave at the op-Amp o/p (at point ... to two channel of the CRO. The time duration between the pulses corresponding to voltages represent the phase between them. 

Explain the operation of UPS with a neat block diagram.

Description : Explain the operation of UPS with a neat block diagram.

Last Answer : Uninterruptible-Power-Supplies (UPS): A block diagram of UPS system is shown in figure. It essentially consists of four major components: i)Rectifier (or battery charger) ii) ... . Due to fast action requirement, transfer switch can be implemented by fast acting semiconductor devices.

Explain the series and parallel operation of MOSFET. Which is suitable and why ?

Description : Explain the series and parallel operation of MOSFET. Which is suitable and why?

Last Answer : Series operation of MOSFET: To increase voltage handling capability MOSFETs are connected in series. When the MOSFETs are connected in series each MOSFET should turn on and turn off ... on and turn off time and transconductance. Each MOSFET should share current equally.  

explain the parallel operation of IGBT?

Description : Also, highlight the problem faced during parallel operation.

Last Answer : Parallel operation of IGBT: Parallel operation of IGBT is done for obtaining high current rating. Paralleling of IGBT reduces conduction losses and thermal stress. IGBT combines the qualities of ... . IGBTs must share losses equally otherwise IGBT may get failure due to thermal differences.

Fuel Pump Operation

Description : Fuel Pump Operation

Last Answer : Most people know that their cars have fuel pumps, but they don't really know how they operate. Some even pay attention to their fuel pumps only when they have already malfunctioned. It is important ... check your fuel pump for any problems because a defective pump can be dangerous while on the road.

State jumping operation.

Description : State jumping operation.

Last Answer : Jumping up operation: This process makes metal shorter and thicker and carried out at near welding temperature. Metal can be either thickened at the ends of bars or swollen in the center.

State the principle of operation of d.c. motor.

Description : State the principle of operation of d.c. motor.

Last Answer : When a current carrying conductor is placed in a magnetic field, the conductor experiences the force. The magnitude of force is given by F = BIL newton  where F – Force   B – maximum flux density   I – Current   L – Length of conductor

operation of DSO with block diagram.

Description : operation of DSO with block diagram.

Last Answer : The input is amplified and attenuated with input amplifiers. The output of the input signal amplifiers feeds an analog to digital converter (ADC). There are numbers of ADC available. But the selection of ADC ... view the display on the CRT, the data from memory is reconstructed in analog form.

operation of ramp type DVM.

Description : operation of ramp type DVM.

Last Answer : This is given to an input comparator which will compare two signals and generates the output. One input to the input comparator is from the input and another input is from the ramp. This input voltage and ... ground and output is given. This output will stop the flow of purchase from clock

operation of half wave rectifier type AC Voltmeter.

Description : operation of half wave rectifier type AC Voltmeter.

Last Answer :  Half-wave Rectifier Voltmeter The d'Arsonval meter movement only responds to the average or dc value of the current through the moving coil. In order to measure alternating ... ) input voltage signal alternating signal needs to be rectified first by using diode rectifier to produce 

operation of whetstone bridge.

Description :  operation of whetstone bridge. 

Last Answer : A Wheatstone bridge is widely used to measure the electrical resistance. This circuit is built with two known resistors, one unknown resistor and one variable resistor connected in the form of bridge. ... using a Wheatstone Bridge the unknown electrical resistance value can easily measure.

Which of the following thyristors can be used for high frequency of operation?

Description : Which of the following thyristors can be used for high frequency of operation? A) TRIAC B) DIAC C) SCR D) GTO 

Last Answer : Which of the following thyristors can be used for high frequency of operation? A) TRIAC B) DIAC C) SCR D) GTO 

A four -quadrant operation requires two full converters connected in

Description : A four -quadrant operation requires two full converters connected in  (1) Series (3) Back to back (2) Parallel (4) Series Cascade

Last Answer : A four-quadrant operation requires two full converters connected in Parallel 

An additional condition for parallel operation of three-phase transformers over single-phase transformers is that

Description : An additional condition for parallel operation of three-phase transformers over single-phase transformers is that

Last Answer : An additional condition for parallel operation of three-phase transformers over single-phase transformers is that the transformers should belong to the same vector group

The operation of a ramp type Digital Voltmeter is based on the principle of

Description : The operation of a ramp type Digital Voltmeter is based on the principle of (A) Voltage-to-current conversion. (B) Voltage-to-time conversion. (C) Current-to-time conversion. (D) Current-to-frequency conversion.

Last Answer : The operation of a ramp type Digital Voltmeter is based on the principle of Voltage-to-time conversion.

For the parallel operation of two or more D.C. compound generators, we should ensure that?

Last Answer : For the parallel operation of two or more D.C. compound generators, we should ensure that series fields of all generators should be either on positive side or negative side of the armature.

Overhead system can be designed for operation up to?

Last Answer : Overhead system can be designed for operation up to 400 kV.

For the parallel operation of single phase transformers it is necessary that they should have?

Last Answer : Necessary conditions required to be satisfied in order to ensure successful parallel operation of single phase transformers:  1. Only transformers having the same phase displacement between primary and secondary ... . 7. The phase sequence must be followed strictly on HV and LV side connection.

Describe the basic SHA operation with the help of its four mode specifications.

Description : Describe the basic SHA operation with the help of its four mode specifications.

Last Answer : Sample-and-hold amplifier (SHA) is a unity gain amplifier with a mode control switch where the input of the amplifier is connected to a time-varying signal. A trigger pulse at the mode control switch ... but other forms, such as optical and mechanical forms, are possible. Also denoted S/H.

parallel operation of mosfet can be done more easily as compared to thyristor. why?

Description : parallel operation of MOSFET can be done more easily as compared to thyristor. why?

Last Answer : Parallel operation of MOSFET can be done more easily as compared to thyristor because the resistance of MOSFET is increases with increase in temperature. MOSFET have the positive temperature coefficient. In ... the parallel operation of MOSFET can be done more easily as compared to the thyristor.

With neat diagram explain the following terms: (i) Steam turbine co-generation system (ii) Gas turbine co-generation system

Description : With neat diagram explain the following terms: (i) Steam turbine co-generation system (ii) Gas turbine co-generation system

Last Answer : (i) Steam turbine co-generation system: The two types of steam turbines most widely used are the backpressure and the extraction. Another variation of the steam turbine topping ... power. The exhaust or the extracted steam from the steam turbine provides the required thermal energy.

Explain with reason through which side of shell and tube heat exchanges, the following liquids are directed. (i) viscous liquid (ii) high pressure liquid (iii) corrosive liquid

Description : Explain with reason through which side of shell and tube heat exchanges, the following liquids are directed. (i) viscous liquid (ii) high pressure liquid (iii) corrosive liquid

Last Answer : Viscous liquid : Viscous liquid is passed through shell side Reason: because of the presence of baffles in the shell induce turbulence and hence increases heat transfer rate. High pressure liquid: High ... To avoid expensive alloy shells (in order to save the cost of expensive material for shell).

With neat sketch explain the construction and working of heat exchanger used for handling corrosive liquid.

Description : With neat sketch explain the construction and working of heat exchanger used for handling corrosive liquid.

Last Answer : Graphite block heat exchanger:   Graphite heat exchangers are well suited for handling corrosive fluids. Graphite is inert towards most corrosive fluids and has very high thermal conductivity. Graphite being ... vertical faces direct the service fluid through the exchanger in a cross flow.

Explain the type of multiple effect evaporator feed arrangement used for handling viscous liquid.

Description : Explain the type of multiple effect evaporator feed arrangement used for handling viscous liquid.

Last Answer : Backward feed arrangement  If the liquid is very viscous, then we have to adopt backward feed arrangement. In this arrangement, the feed solution and vapour flow is in opposite direction. Fresh feed is ... Not very common as it need pump. At low values of feed temperature higher economy.

Explain Wilson plot.

Description : Explain Wilson plot.

Last Answer : Wilson Plot: The Wilson plot method was developed by Wilson in 1915 to evaluate the convection coefficients in shell and tube condensers for the case of a vapour condensing outside by means of ... resistance and the remaining thermal resistances participating in the heat transfer process.

Explain Kirchhoff’s Law with its mathematical expression in detail.

Description : Explain Kirchhoff’s Law with its mathematical expression in detail.

Last Answer : Kirchoff's law of radiation: Kirchoff's law: It states that at equilibrium temperature, the ratio of total emissive power of any body to absorptivity depends only upon the temperature of the body. ... respectively. At thermal equilibrium, absorption and emission rates are equal, thus,

With a neat diagram explain the construction of calendria type evaporator.

Description : With a neat diagram explain the construction of calendria type evaporator.

Last Answer : Calendria type(Short tube) evaporator: Construction: It consists of vertical cylindrical shell incorporating short vertical tube bundle with horizontal tube sheet. Vapour inlet is provided at top ... sheet, while non condensable gas is vented to atmosphere from point near top tube sheet.

Explain the properties of solution that influences evaporation.

Description : Explain the properties of solution that influences evaporation.

Last Answer : Properties of evaporating liquid 1. Concentration: As the concentration increases, the solution becomes more and more individualistic. The viscosity and density increase with solid content. The boiling point of ... is a problem, special materials such as copper, nickel, stainless steel may be used.

Explain the concept of optimum thickness of insulation.

Description : Explain the concept of optimum thickness of insulation.

Last Answer : Optimum thickness of insulation: The optimum thickness of an insulation is obtained by purely economic approach. The greater the thickness, the lower the heat loss & the greater the initial cost of ... sum values of heat lost and annual fixed charges) of the insulation is minimum. 

Give expression for the following and explain the terms involved. (i) Nusselt number (ii) Prandtl number

Description : Give expression for the following and explain the terms involved. (i) Nusselt number (ii) Prandtl number

Last Answer : 1. Nusselt NumberNNU= hd/k  h – fim heat transfer coefficient  d - diameter of pipe  k – thermal conductivity of fluid 2. Prandtl Number NPR -Cp µ/k Cp– specific heat of fluid µ - viscosity of fluid  k – thermal conductivity

What is the term for gas in neighbourhood coming from the sewage treatment plant?

Description : What is the term for gas in neighbourhood coming from the sewage treatment plant?

Last Answer : Very strong overwhelming smell the word gas is part of the term.

How much are your local gas prices?

Description : How much are your local gas prices?

Last Answer : West Virginia is at 1.79.

Can you help me understand the market for "Anti-Gas" preparations?

Description : Can you help me understand the market for "Anti-Gas" preparations?

Last Answer : For me, bell peppers are like kryptonite for my pipes. They seem to get slipped into the darnedest of foods! Of course, by the time I notice it's too late. Coupled with rapidly advancing age I can ... have left gifts for in the elevator. I am approaching the age my Father said Never trust a fart

How much should I give for gas money?

Description : How much should I give for gas money?

Last Answer : answer:What kind of car and what kind of gas mileage does it get? A five-hour drive is about 280 miles depending on stop-and-go. If you figure the car gets c. 28 mpg/ that's about 10 gallons of ... doing this driving to convenience you? Then it's simple. Pay to fill the tank when she stops for gas.