State any four factors for selection of hydro power plant site. 

2 Answers

Answer :

Factors governing selection of site for hydroelectric power plant: 1) Availability of water: Primary requirement of hydropower station is availability of huge amount water. 2) Storage of water: Sufficient space should be available to collect the water during high flow period (rainy season) and use it throughout the year. 3) Head of Water: Stored water must have high head as it reduces quantity of water required to run the turbine. 4) Soil condition: It must have sufficient strength to withstand the heavy dam structure. 5) Geographical situation: The location can offer advantage to store huge amount of water and also for dam construction. 6) Transportation facility: The site should be accessible by rail and/or road so that necessary equipment & machinery can be easily transported. 7) Near to the load centre: To reduce the cost of transmission lines, the site should be near to the load centre. 8) Cost of land: The land must be cheaply available. 9) Free from earthquake zone: For safety of huge dam structure and water storage. 10) Silt and debris (unwanted solid particles): The catchment area should be such that there are less accumulation of silt and debris. 11) Water pollution: Water should be free from chemical impurities. 

Answer :

Following Factors to be kept while site selecting for Hydro power plant:

1) Quantity of water available :-Where high rainfall occures so that sufficent quantity of water can be stored for generation of electricity through out year. 2) Water Storage :-Catchment area must be large to collect water in high flow period and used throughout the year. Water is stored by constructing dam across river. 3) Head of Water :-Stored water must have high head as high head reduces quantity of water required to run the turbine. 4) Hilly Area :- If site is located in hilly area then, it reduces construction cost of dam and for catchment area. 5) Rocky(Hard Murrum) area - To reduce the construction cost of damp and other structure it is necessary that area should be rocky. 6) Free from Earthquake :-The Area should be free from earthquake. 7) Water pollution :- It is necessary to see that water is of good quantity(no chemical impurities) because polluted water make cause corrosion. 8) Silt/debris:- The catchment area should be such that there are less accumulation of silt because capacity of storage reservoir will reduce due to the gradual deposition of silt, debris (means unwanted solid partials) and it should be minimum. 9) Transportation Facility:- The site selected for hydro power station accessible by rail & road so that necessary equipment & machinery could be easily transported. 10)Cost of land:-Cost of land should be less. 11)Near to load centre:-It should be located as far as possible near load center to reduce transmission line cost.


OR


The following are the points to be considered for the selection of site for hydroelectric power station. 1. Abundant quantity of water at reasonable head must be available. 2. It must be possible to construct an economical dam. 3. Transport facilities for workers and material must be made available, i.e., the site should easily be accessible. 4. Availability of labor at a cheaper rate. 5. It should allow strong foundation with low cost. 6. Sittings reduce the reservoir capacity. So, the rate of sitting should not be high. 7. Structures of cultural or historical importance should not be damaged. 8. There should be no possibility of future sources of leakages of water. 9. A large catchments area must be available. 10. During the construction period, it should be possible to divert the stream. 11. Sand, gravel, etc., should be available nearby.

Related questions

Description : State any four factors for selection of site of wind power plant.

Last Answer : The Factors for selection of site for Wind Mills: 1) The site should be selected where winds are strong i.e. where pressure of wind is high and there is continuity (14.4- 16.2 km/h) ... 50m of the turbine which can affect the system's overall performance 10)Possibility to connect to power grid. 

Description : State any four factors governing Selection of site for thermal power station. 

Last Answer : Following Factors are to be considered:- 1. It should locate near coal mine. 2. Sufficient quantity of water should be available. 3. Sufficient large space should be available. 4. It should be located ... laws of the land and the town planning. 14. The interests of national defense must be served.

Description : Write any two disadvantages of hydro power plant.

Last Answer : Disadvantages of hydro power plant: i) Due to high cost of civil engineering works, the capital cost per kW of hydro plants is considerably higher than that of steam plants. ii) Hydro ... ) Hydro plant reservoir submerges huge areas, uproots large population and creates social and other problems. 

Description : State the various factors governing selection of site for TPS. 

Last Answer : Following various factors governing selection of site for TPS.:- 1. It should locate near coal mines. 2. Sufficient quantity of water should be available. 3. Sufficient large space should ... availalbe nearly. To the extent possible, the thermal station should be far away from an aerodrome   

Description : With a neat diagram explain pumped storage hydro power plant. 

Last Answer : Diagram of pumped storage hydro power plant: Explanation: In this power plant, generator is so designed that it Converts mechanical power into electrical power and also works as a ... helps in reducing a reserve capacity of PP as it provides additional power during peak load period. 

Description : List the types of turbine used in hydro power plant.  

Last Answer : Following types of turbine used in hydro power plant:  1.Pelton wheel 2.Francis Turbine 3.Kaplan Turbine 4.Propeller Turbine 

Description : State any four factors for selecting location of nuclear power plant.

Last Answer : i) Seismicity: If the area of a nuclear site is seismically active, it may not be used for nuclear power plant.  ii) Water Availability: The nuclear power plants would need a ... Therefore, the site selected for such plant should have adequate arrangement for the disposal of radioactive waste.

Description : State and explain any four factors governing selection of induction motor.

Last Answer : The factors governing the selection of Induction motor: 1) Load torque required at normal speed matches with available torque of motor. 2) Break down torque or pull out torque or maximum torque ... If selecting energy efficient motor the cost benefit analysis over the long run must be worked out.

Description : Compare the Nuclear power station with Hydro power station. 

Last Answer : SR. No.  Points Nuclear Power plant  Hydro Power station  1 Site/ Location Where there is ample supply of water is available, away from thickly populated areas to avoid radioactive ... Field Application As base load  Used as base load during as well as peak load 

Description : Explain the working of Hydro power station with schematic layout. 

Last Answer : Working of Hydro- Electric Power Plant: Water stored at high level by constructing dam across river. This stored water has potential energy. This stored water is passed to run the water ... energy and Alternator is coupled to water turbine which converts mechanical energy into electrical energy. 

Description : "Hydro electric power station are not perennial power station". Justify.

Last Answer : Justification: The water utilized by the hydro power plants comes mostly from storage dams/reservoirs which get filled up during the monsoon rainy season. Such reservoirs are utilized for supplying ... are important. Hence "Hydro electric power stations are not perennial power station" 

Description : The main disadvantages of having poor power factors are:  (A) High cost of station and distribution equipment (B) Poor voltage regulation (C) High energy loss in conductor (D) All of the above

Last Answer : The main disadvantages of having poor power factors are:  (A) High cost of station and distribution equipment (B) Poor voltage regulation (C) High energy loss in conductor (D) All of the above

Description : What are the criteria for selection of site for hydroelectric power plant?

Last Answer : Following Factors to be kept while site selecting for Hydro power plant:  1. It should be located where high rain fall occurs. 2. A large catchments area must be available to store water. 3. It ... 12. Cost of land should be less. 13. Skilled and unskilled man power should be available nearby.

Description : List out any four salient features of hydro generator.

Last Answer : Following are the salient features of a Hydro Generator (alternator):  It is 3-ph hydro generator (alternator). It is robust in construction. A separate excitation is given to ... & under frequency protection, 5. Over temperature protection are main protections provided to generator.

Description : State any four advantages and four disadvantages of diesel electric power plant. 

Last Answer : Advantages of Diesel electric power plant:- 1) The design and layout of Diesel electric power plant is simple. 2) It requires less space. 3) Time required for complete erection of diesel power plant is less ... . 9) The useful life is very short. 10) Availability of fuel in future may be limited.

Description : Write any four advantages and four disadvantages of thermal power plant.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : List out the four applications of diesel electric power plant.

Last Answer : Applications of Diesel Power Plant: 1. It can be used as a standby (emergency) power plant to maintain continuity of supply. (Incase failure of main supply like hospital, Telephone exchange Radio stations, ... 10. Diesel plants are widely used for generating power ranging from 100 to 5,000 H.P.

Description : How to Build a Hydro Generator

Last Answer : How to Build a Hydro Generator How to Build a Hydro Generator Hydroelectricity generators are capable of producing electricity using hydropower. It is a form of convertible energy. Small hydro ... of electricity to homes and business centers thousands of kilometers away through a network of wires.

Description : State elements of diesel electric power plant with their functions. 

Last Answer : Elements of Diesel Power Plant with their function):   1) Diesel Engine: - This is the main component of the P.P. which develops mechanical power. 2) Engine air intake system: - Air ... fuel as per requirement. 10) Alternator: - Its function is to convert mechanical power into electrical power.

Description : State advantages of Pulverized coal w.r.t. thermal power plant. 

Last Answer : Advantages of Pulverized coal w.r.t. thermal power plant.  1. Due to pulvarization amount of fuel required to produce same amount of heat reduces. 2. Time required for combution reduces ... of air and thorough mixing of air and fuel, very high-combustion temperatures can be attained.

Description : State the function of super heater of a thermal power plant. 

Last Answer : Function of Super heater: -  Its function is to increase the temperature of steam by absorbing heat from exhausted hot flue gases.

Description : State why nuclear power plants are used as base load plants and diesel power plants as a peak load plant. 

Last Answer : 1. Because of following points Nuclear power plant used as base load power plant:-  1. Nuclear power plants is very economical for producing bulk amount of electric power 2. Nuclear power plant is reliable ... . The plants can be put on load easily. 4. Diesel engines take less time to make OFF.

Description : State the advantages and disadvantages of hydroelectric power plant.

Last Answer : Advantages of Hydroelectric power plant:-  1. There is no air pollution and other environmental problems. 2. The fuel (water) is available freely. 3. No fuel transportation cost so; there is ... , this can force the relocation of large numbers of riverside cities, towns, villages & people.

Description : State any two advantages and two disadvantages of nuclear power plant.

Last Answer : Disadvantages of Nuclear Power Plant: -   1. The capital cost of Nuclear power plant is very high as compare to other power plant of same capacity. 2. The erection & ... material could be released into the environment. Causing extensive damage to the mankind,animals and environment.

Description : State the different types of engines in diesel power plant.

Last Answer : Types of engines in diesel power plant: 1) Two Stroke Diesel Engine 2) Four Stroke Diesel Engine

Description : What are the basic requirements of locating wind power plant ?

Last Answer : The basic requirements of locating wind power plant:  1) The site should be selected where winds are strong i.e. where pressure of wind is high and there is continuity. 2) Wind pressure ... the turbine which can affect the system's overall performance. 10)Possibility to connect to power grid. 

Description : Explain the nuclear chain reaction in a nuclear power plant.

Last Answer : Nuclear chain reaction in a nuclear power plant: If a slow moving neutron hits unstable heavy nucleus of nuclear fuel U235 or Pu239 , the neutron is absorbed, the nucleus splits into two more ... chain reaction can be controlled and desired heat energy can be obtained in nuclear power plant. 

Description : Explain starting system in diesel electric power plant.

Last Answer : Starting system in Diesel Electric Power Plant: It includes Storage battery, compressed air tanks, self-starter etc. The purpose of engine starting system is to rotate the engine initially while ... as Ammeters, Voltmeters, Wattmeters, Thermometers, Pressure gauges, Visible and audible alarm etc.

Description : Explain the procedure for disposal of nuclear power plant.

Last Answer : Disposal of nuclear waste: The waste products by nuclear fission may be solid, liquid or gas. i) Solid harmful disposals are packaged as required and shipped to a burial site for disposal. ii) Liquids ... and tested. If the required limits are met, these will be released to atmosphere. 

Description : Explain fuel system and air intake system in diesel electric power plant.

Last Answer : Fuel system and air intake system in diesel electric power plant :  Fuel system: It consists of storage tank, strainers, fuel transfer pump and all day fuel tank. The fuel oil is supplied ... Filters are provided to remove dust particles from air which may act as abrasive in the engine cylinder.

Description : Explain ash disposal and dust collection in a thermal power plant.

Last Answer : Ash disposal:-  Various methods of disposal of ash are:  Mechanical handling system.  Pneumatic system. Hydraulic system  Steam jet system  Commonly used ash handling ... be done either manually or automatically.  This removed fly ash is collected in separate container

Description : Distinguish between fire tube and water tube boilers in steam power plant.

Last Answer : Fire Tube boiler Water Tube boiler In fire tube boilers hot gases are passed through the tubes and water surrounds these tubes. In these boilers water is inside the tubes and hot gases are ... risk of explosion due to low pressure. Risk of explosion is more due to high pressure.

Description : Write function of control rods in nuclear power plant.

Last Answer : Function of control rods in nuclear power plant: The function of control rod is to control the chain reaction in reactor core by adjusting its height.

Last Answer : A power plant usally works on Rankine Cycle.

Description : State the selection criterion of the lamp for various purposes.

Last Answer : Selection criterion of the lamp for various purposes:  While selecting a lamp for a particular purpose, the available lamps are compared on the basis of following criteria: * Light output ... such as ballasts * Compatibility with the electrical system * Suitability for the operating environment

Description : State criteria for selection of contractor. 

Last Answer : Following the criteria for selection of contractor: 1. Contractor should be well reputed 2. Past experience of the Contractor 3. Contractor licenses should be valid 4. Works in hand of ... Material availability of the contractor. 6. Tax clearance certificate & financial power of contractor.

Description : Selection Criteria of PLC

Last Answer : Selection criteria :- To select PLC for any particular application following points are to be considered. a) Type of PLC: Analog or Digital b) Number of inputs and outputs to PLC c) Operating voltage ... Type of memory of PLC g) Type of programming h) Reliability of PLC i) Flexibility of PLC

Description : Explain selection of starters for Industrial Installation. 

Last Answer : selection of starters for Industrial Installation: Every motor must be provided with a starter to start and stop the motor. It shall be within the sight of a person at the motor. It shall be so arranged as ... -Auto transformer starter  Slip ring I.M.------------------Rotor resistance starter

Description : State the condition for selecting site for distribution substation. 

Last Answer : Following condition should be considered while selecting site for distribution sub-station:-  1. Near load center :  Sub-station should be located near load center to reduce cost of Transmission and ... free from earthquake :  To avoid damage to sub-station area should be free earth quake. 

Description : Web site to link multiple screens through web browser?

Last Answer : Just found it! Junkyard Jumbotron

Description : Explain the function of different parts of a typical nuclear power plant with neat sketch. 

Last Answer : Functions of each part of Nuclear power plant:-  1) Nuclear Reactor: In nuclear reactor the fuel rod of U235 is placed through which tremendous amount of heat energy is ... is mechanically coupled with steam turbine. 8) Alternator: It converts mechanical energy into electrical energy.

Description : Draw a layout of a thermo-chemical based power plant. 

Last Answer : Layout of a thermo-chemical based power plant:  In this process dry biomass fuels converted to produce gas ,liquid fuels or oil by thermo chemical conversion Thermo-Chemical conversion are of following ways:- 1. Direct combustion 2. Gasification 3. Pyrolysis

Description : With a neat diagram explain solar photovoltaic power plant. 

Last Answer : Diagram of solar photovoltaic power plant :  Explanation:  Solar power plant consists of following components:  1. Photovoltaic cell panel: Its function is to convert sunrays directly into DC ... .  5. Step-up transformer: It step-up input voltage to utilization voltage e.g. 230V

Last Answer : Because of following advantages concentrating type collector are used in solar power plant: -  1. Temperature: Temperature obtained is high because absorber area is less and collector/reflector area ... results: As tracking system is used better results are obtain than flat type collector.

Description : The overall efficiency of Thermal Power Plant is equal to _______________ .  (A) Regenerative Cycle Efficiency (B) Renkine Cycle Efficiency (C) Carnot cycle efficiency (D) None of the above

Last Answer : The overall efficiency of Thermal Power Plant is equal to Regenerative Cycle Efficiency. 

Description : In a thermal power plant, ash is collected in

Last Answer : In a thermal power plant, ash is collected in hoppers or bunkers

Description : The capital cost of a power plant depends on  (1) Total installed capacity only. (2) Total number of units only. (3) Total installed capacity and number of units as well. (4) Neither the installed capacity nor number of units

Last Answer : The capital cost of a power plant depends on Total installed capacity and number of units as well.

Description : The rankine cycle efficiency of steam power plant is  (1) 60-80% (3) 30-45% (2) 45-80% (4) 20-30%

Last Answer : The rankine cycle efficiency of steam power plant is 30-45%

Last Answer : In a power plant if the maximum demand on the plant is equal to the plant capacity, then plant reserve capacity will be zero.

Last Answer : Maximum demand on a power plant is the greatest of all "short time interval averaged" demand during a period.