Write a short note on Measuring Flask

Write a short note on Measuring Flask
by

1 Answer

Answer :

Measuring Flask : Flask is laboratory vessels (container). The flask is made of plastic or glass. They are of different sizes and shapes. In school laboratory, 50ml, 100ml, 250ml, 500ml & 1000ml flask are used for making solutions.
Measuring Pipette : Pipette is used to transfer a measured volume of liquid from one container to another. They are of different sizes and shapes. In laboratory 10ml to 25 ml pipette of glass or plastic are used.
by

Related questions

Describe spring control method of producing controlling torque in measuring instrument. Write any two properties required for spring material.

Description : Describe spring control method of producing controlling torque in measuring instrument. Write any two properties required for spring material.

Last Answer : A)Spring control method: As shown in the figure, the inner ends of the both springs are attahced to the spindle, while outer end of upper spring is attached to the lever and outer ... of spring material: 1.Non Magnetic material 2.Low specific resistance 3.Low temperature coefficient of resistance

List out any four effects of electric current used in measuring instruments & write name of meter working on it.

Description : List out any four effects of electric current used in measuring instruments & write name of meter working on it.

Last Answer : Effects of Electric Current used in measuring instruments:  1. Magnetic Effect: PMMC and Moving Iron type Ammeters, voltmeter and Dynamometer type wattmeters etc.  2. Electromagnetic induction ... . Electrostatic effect: Voltmeters.  5. Hall Effect: Flux meter, Poynting vector wattmeter.

What are the test and measuring instrument required in an Electrical depots?

Description : What are the test and measuring instrument required in an Electrical depots?

Last Answer : Ans. Following are the test and measuring instruments required in an Electrical depots. a. Test lamp b. Line Tester c. Continuity tester d. Volt meter e. Ammeter f. Earth megger g. Megger h. Lux meter i. Power analyzer j. Infrared thermometer

Electrical Measuring Instruments

Description : Electrical Measuring Instruments

Last Answer : Electrical Measuring Instruments

calibration and the need of calibration for measuring instruments.

Description : calibration and the need of calibration for measuring instruments.

Last Answer : Calibration - It is a process of estimating the value of a quantity by comparing that quantity with a standard quantity.    Need of calibration: - Calibration defines the accuracy and ... aim of calibration is to minimize any measurement uncertainty by ensuring the accuracy of test equipment.

Explain the essential toques in analog type measuring instruments.

Description : Explain the essential toques in analog type measuring instruments.

Last Answer : List of torques in analog instruments:  1. Deflecting torque  2. Controlling / Restraining torque.  3. Damping torque.  1. Deflecting torque: To create deflection proportional to ... the speed higher will be the damping torque bringing the pointer to the equilibrium position quickly. 

State two purposes of calibration of measuring instruments.

Description : State two purposes of calibration of measuring instruments.

Last Answer : Purposes of calibration of measuring instruments: - The purpose of calibration is to ensure that readings of an instrument are consistent with other instruments. It is also important in determining the ... will need to be calibrated periodically to make sure it can function properly and safely. 

List three types of errors in measuring instruments. Give reasons of occurring for any one of them.

Description : List three types of errors in measuring instruments. Give reasons of occurring for any one of them.

Last Answer : Types of errors in measuring instruments:  A) Gross error: These are due to mistakes on the part of person using the instrument.  B) Systematic Error: i) Instrumental Error: These ... multiplying factor.  C) Random error: These persist even after gross and systematic errors are removed.

Define following terms related to measuring instruments: i) Sensitivity ii) Selectivity.

Description : Define following terms related to measuring instruments: i) Sensitivity ii) Selectivity.

Last Answer : i) Sensitivity: It is the ratio of the change in output signal to the change in input signal of quantity being measured.  ii) Selectivity: It is the term to describe fulfillment of the requirements of measurement by an instrument to be suitable for use in a given situation. 

Name the different torque and their function in measuring instrument.

Description : Name the different torque and their function in measuring instrument.

Last Answer : List of torques in analog instruments:  1. Deflecting torque  2. Controlling / restraining torque.  3. Damping torque.  1. Deflecting torque:  - To create deflection of pointer ... .  - Bring the pointer to standstill quickly.  - To minimize oscillations about final position. 

Give the classification of the errors used in measuring instrument & state the reason for their occurrence.

Description : Give the classification of the errors used in measuring instrument & state the reason for their occurrence.

Last Answer : Types of errors in measuring instruments:  A) Gross error: These are due to mistakes on the part of person using the instrument.  B) Systematic Error:  i) Instrumental Error: These ... multiplying factor.  C) Random error: These persist even after gross and systematic errors are removed. 

What arc the errors occurring in measuring devices due to stray magnetic field and temp '? Explain how to compensate them.

Description : What arc the errors occurring in measuring devices due to stray magnetic field and temp '? Explain how to compensate them.

Last Answer : 1. Error due to stray magnetic fields-   Main magnetic field gets disturbed by external magnetic fields known as stray magnetic fields.  2. Compensation technique   To avoid this error, ... resistance alloy having a negligible resistance temp coefficient in the ratio of 1:10 for pressure coil 

Explain magnetic effect employed in measuring instrument.

Description : Explain magnetic effect employed in measuring instrument.

Last Answer : Magnetic Effect:  I) In PMMC meters:  ➢ When a current is passed through a conductor, magnetic field is produced round the conductor. Due to this field when current ... field it experiences a mechanical force.  Examples: Electrodynamometer type instruments, Induction type instrument. 

Describe systematic errors in measuring instruments.

Description : Describe systematic errors in measuring instruments. 

Last Answer : Systematic errors: -  ➢ Instrumental Error: These errors are caused due to the mechanical structure of measuring instrument.  a) Inherent shortcomings of instruments: Instrument may read ... or electrostatic fields.  ➢ Observational Error: Parallax errors, incorrect multiplying factor. 

State the function of controlling torque in electrical measuring instrument.

Description : State the function of controlling torque in electrical measuring instrument.

Last Answer : Function of controlling torque  1. The function is to opposes the deflection force and increases with the increase in the deflection of the moving system, to limit its movement. 2. and brought ... set a position where the two opposing forces i.e. deflection and controlling forces are equal. 

Define: (i) Resolution, (ii) Calibration, with reference to electrical measuring systems.

Description : Define: (i) Resolution, (ii) Calibration, with reference to electrical measuring systems.

Last Answer : Resolution The smallest increment in input (the quantity being measured) which can be detected with certainty by an instrument is called its resolution or discrimination.  OR It is ... the measuring instrument with standard instrument to find out the error in the instrument under test.

Why energy meter is integrating type measuring instrument?

Description : Why energy meter is integrating type measuring instrument?

Last Answer : Energy Meter is Integrating Type Measuring Instrument: Energy meter is used for measurement of energy, which is obtained by integration (summation) of power supplied over the particular time duration, hence it the integrating type measuring instrument. 

List any four effects employed in measuring instruments.

Description : List any four effects employed in measuring instruments.

Last Answer : Effects Employed in Measuring Instruments: 1. Magnetic Effect 2. Electromagnetic induction 3. Heating effect 4. Electrostatic effect 5. Hall Effect 

When measuring insulation resistance of cables using d.c. source, the galvanometer used should be initially

Description : When measuring insulation resistance of cables using d.c. source, the galvanometer used should be initially short circuited because  (A) Cables have a low value of capacitance which draws a high ... high value of charging current (D) Cables have a low value of capacitance and initial resistance

Last Answer : When measuring insulation resistance of cables using d.c. source, the galvanometer used should be initially short circuited because Cables have a high value of capacitance which draws a high value of charging current

The desirable static characteristics of a measuring system are?

Last Answer : The desirable static characteristics of a measuring system are accuracy, sensitivity and reproducibility.

For measuring a very high resistance we should use?

Last Answer : For measuring a very high resistance we should use Meggar.

For measuring current at high frequency we should use?

Last Answer : For measuring current at high frequency we should use thermocouple instrument.

String efficiency is used for measuring the?

Last Answer : String efficiency is used for measuring the degree of utilization of SCR.

Decoupaging a Flask - Sealer type?

Description : Decoupaging a Flask - Sealer type?

Last Answer : I made a birdbath out of a gorgeous piece of african red mahogany. I figured I could seal it with marine grade polyurethane, but it didn't work, the water still crept under and eventually ... completely and permanently. But someone else might have a magical solution. Sounds like a neat idea though.

How does one measure the capacity of a round bottom boiling flask?

Description : How does one measure the capacity of a round bottom boiling flask?

Last Answer : Fill it and pour it into a liquid measuring jug to measure the capacity.

What's a good drink for your hip flask?

Description : What's a good drink for your hip flask?

Last Answer : Whiskey?

I'm first found in caves, now prolific online; I'm a depiction, a drawing, a symbol, or sign. I'll convey whichever mood you could wish; or for that matter, a fist, flask, or fish. What am I? -Riddles

Description : I'm first found in caves, now prolific online; I'm a depiction, a drawing, a symbol, or sign. I'll convey whichever mood you could wish; or for that matter, a fist, flask, or fish. What am I? -Riddles

Last Answer : An emoji.

What's the Difference Between Django and Flask?

Description : What's the Difference Between Django and Flask?

Last Answer : Flask offers a diversified working style while Django offers a monolithic working style. Flask is a WSGI framework while Django is a Full-stack Web Framework. Django is considered to be more popular ... to build complex applications. Flask is a good start if you are getting into web development.

S.L. Miller an American scientist created electric discharge experiment in a closed flask containing `CH_(4),H_(2),NH_(3)` and water vapour at what te

Description : S.L. Miller an American scientist created electric discharge experiment in a closed flask containing `CH_(4),H_(2),NH_(3)` and water vapour at what te

Last Answer : S.L. Miller an American scientist created electric discharge experiment in a closed flask containing `CH_(4),H_(2),NH_ ... . `200^(@)C` D. `1000^(@)C`

Swan neck flask experiment proved :

Description : Swan neck flask experiment proved :

Last Answer : Swan neck flask experiment proved : A. biogenesis B. abiogenesis C. special creation D. both (1) and (2)

A well stoppered thermo flask containing some ice cubes is an example of

Description : A well stoppered thermo flask containing some ice cubes is an example of

Last Answer : A well stoppered thermo flask containing some ice cubes is an example of A. Closed system B. ... system C. Isolated system D. Non-thermodynamic system

3 gram of activated charcoal was added to 50 mL of acetic acid solution (0.06N) in a flask. After an hour it was filtered and the strength of the fitr

Description : 3 gram of activated charcoal was added to 50 mL of acetic acid solution (0.06N) in a flask. After an hour it was filtered and the strength of the fitr

Last Answer : 3 gram of activated charcoal was added to 50 mL of acetic acid solution (0.06N) in a flask. After an hour it was ... B. `36 mg` C. `42 mg` D. `54 mg`

A flask-shaped fleshy recetacle enclosing both the types of flowers is present in

Description : A flask-shaped fleshy recetacle enclosing both the types of flowers is present in

Last Answer : A flask-shaped fleshy recetacle enclosing both the types of flowers is present in A. Cyathium B. Hypanthodium C. Coenanthium D. Spadix

A 500 mL glass flask is filled at 298 K and 1 atm, pressure with three diatomic gases, X, Y and Z . The initial volume ratio of the gases before mixin

Description : A 500 mL glass flask is filled at 298 K and 1 atm, pressure with three diatomic gases, X, Y and Z . The initial volume ratio of the gases before mixin

Last Answer : A 500 mL glass flask is filled at 298 K and 1 atm, pressure with three diatomic gases, X, Y and Z . The ... . `H_2 , F_2 , O_2` D. `O_2,H_2 , F_2`

What is a conical flask used for in science?

Description : What is a conical flask used for in science?

Last Answer : Need answer

What happens if the solution in the conical flask gets washed with distilled water during the experiment?

Description : What happens if the solution in the conical flask gets washed with distilled water during the experiment?

Last Answer : That will depend on what the solution is, as well as many otherpossible conditions what you failed to specify in yourquestion.

What type of chemical reaction is a flaming flask?

Description : What type of chemical reaction is a flaming flask?

Last Answer : This is an example of hydrogen burning.

What is a stand and mat used to hold a beaker or flask over a Bunsen burner?

Description : What is a stand and mat used to hold a beaker or flask over a Bunsen burner?

Last Answer : Need answer

What type of chemical reaction is a flaming flask?

Description : What type of chemical reaction is a flaming flask?

Last Answer : This is an example of hydrogen burning.

A fern differ from a moss in prossessing: (a) Swimming/flagellated anitherozoids (b) Flask-shaped archegonia (c) Independent Sporophyte (d) Independent gametophyte

Description : A fern differ from a moss in prossessing: (a) Swimming/flagellated anitherozoids (b) Flask-shaped archegonia (c) Independent Sporophyte (d) Independent gametophyte

Last Answer : Ans. ((c))

Drinks remain hot or cold for a long time in a thermos flask because of the (a) presence of air, which is a bad conductor of heat, in between the double walls (b) silver coating on the inside of the double walls (c) vacuum between the double walls (d) combined effects of (b) and (c)

Description : Drinks remain hot or cold for a long time in a thermos flask because of the (a) presence of air, which is a bad conductor of heat, in between the double walls (b) silver coating on the inside of the double walls (c) vacuum between the double walls (d) combined effects of (b) and (c)

Last Answer : Ans:(d)

Why does a liquid remain hot or cold for a long time inside a thermo flask?

Description : Why does a liquid remain hot or cold for a long time inside a thermo flask?

Last Answer : Ans: Because of the presence of air, which is poor conductor of heat, in between the double glass walls of a thermos flask.

To limit current in LED, resistor should be connected in A. parallel B. series C. evacuated flask D. ionized tube

Description : To limit current in LED, resistor should be connected in A. parallel B. series C. evacuated flask D. ionized tube

Last Answer : series

From his experiments, S.L. Miller produced amino acids by mixing the following in a closed flask. (a) CH4, H2, NH3 and water vapor at 800°C (b) CH3, H2, NH4 and water vapor at 800°C (c) CH4, H2, NH3 and water vapor at 600°C (d) CH3, H2, NH3 and water vapor at 600°C

Description : From his experiments, S.L. Miller produced amino acids by mixing the following in a closed flask. (a) CH4, H2, NH3 and water vapor at 800°C (b) CH3, H2, NH4 and water vapor at 800°C (c) CH4, H2, NH3 and water vapor at 600°C (d) CH3, H2, NH3 and water vapor at 600°C

Last Answer : a) CH4, H2, NH3 and water vapor at 800°C

Tea kept in a thermos flask is vigorously shaken. If the tea is considered as a system, then its temperature will (A) Increase (B) Decrease (C) Remain unchanged (D) First fall and then rise

Description : Tea kept in a thermos flask is vigorously shaken. If the tea is considered as a system, then its temperature will (A) Increase (B) Decrease (C) Remain unchanged (D) First fall and then rise

Last Answer : (A) Increase

Write a short note on the following topics. (a) Terrace farming -Geography

Description : Write a short note on the following topics. (a) Terrace farming -Geography

Last Answer : (a) Terrace farming Terraces are built on steep slopes to control soil erosion. It levels the soil and supports are built to prevent landslides. It requires skill and hard labour to build it. (b) ... It is found in lower parts of valleys and hilly regions of J&K, Himachal Pradesh, Uttarakhand, etc.

Write a short note on the sugar industry. -Geography

Description : Write a short note on the sugar industry. -Geography

Last Answer : Sugar industry is agro-based Industry. India is the second largest producer of Sugar in the world. This industry is seasonal in nature, hence many works in cooperatives. 60% of sugar mills in India is ... are old and inefficient. If any stage goes wrong, it results in a huge loss to the farmer.

What is bhoodan-gramdan movement? Write a short note about it. -SST 10th

Description : What is bhoodan-gramdan movement? Write a short note about it. -SST 10th

Last Answer : 'This answer was deleted by our moderators...

Write a short note on the development of factories in India. -SST 10th

Description : Write a short note on the development of factories in India. -SST 10th

Last Answer : (i) Cotton and jute mills were the first to be established in India The first cotton mill was set up in 1854 at Bombay Mumbai (ii) By 1864. the number rose to four The textile null was followed ... was set up (v) By 1874. the first spinning and weaving mill of Madras (Chennai) began is production.

Write a short note on Sir Henry Morton Stanley. -SST 10th

Description : Write a short note on Sir Henry Morton Stanley. -SST 10th

Last Answer : Stanley was a journalist and explorer sent by the New York Herald to find Livingston, a missionary and explorer who had been in Africa for several years. Like other European and ... , investigated African terrains, and mapped different regions. These explorations helped the conquest of Africa.