Give the two functions of yoke in DC motor.

Give the two functions of yoke in DC motor. 
by

1 Answer

Answer :

Functions of yoke in DC motor: 1) Provides mechanical support for poles. 2) Acts as protecting cover for machine. 3) Provides path for magnetic flux.

by

Related questions

State the function of following parts of DC motor : i) Yoke ii) Poles iii) Field winding iv) Commutator.

Description : State the function of following parts of DC motor : i) Yoke ii) Poles iii) Field winding iv) Commutator. 

Last Answer : Function : i) Yoke: The yoke serves the following two purposes. i) It supports the other components such as poles and provides mechanical protection for whole machine. ii) It forms a part of ... one pole to another and thus to help the motor to develop a continuous and unidirectional torque  

Functions of mold board plough a. Cutting the furrow slice. c) body to yoke b. Increase the depth of operation. d) length of the beam

Description : Functions of mold board plough a. Cutting the furrow slice. c) body to yoke b. Increase the depth of operation. d) length of the beam

Last Answer : Cutting the furrow slice.

What game can I use a FlightSim Yoke Wheel on my PC for?

Description : What game can I use a FlightSim Yoke Wheel on my PC for?

Last Answer : You can use your FlightSim yoke wheel on Microsoft Flight Simulator 2004 or later, and also on Lucas Arts games when flying is needed.

Brushes in a generator must be positioned in the neutral plane to avoid sparking between the brushes and the _____________. A. yoke B. armature windings C. field pole windings D. commutator

Description : Brushes in a generator must be positioned in the neutral plane to avoid sparking between the brushes and the _____________. A. yoke B. armature windings C. field pole windings D. commutator

Last Answer : Answer: D

As shown in the illustrations, ordered rudder angle is fed back from the ________________. EL-0097 A. power unit to the magnetic amplifier B. steering gear to the control potentiometer C. magnetic amplifier to the steering gear D. rudder yoke to the non-followup controller

Description : As shown in the illustrations, ordered rudder angle is fed back from the ________________. EL-0097 A. power unit to the magnetic amplifier B. steering gear to the control potentiometer C. magnetic amplifier to the steering gear D. rudder yoke to the non-followup controller

Last Answer : Answer: A

The area of the yoke in a transformer is taken 15 to 20% larger than that of the core. Why?

Description : The area of the yoke in a transformer is taken 15 to 20% larger than that of the core. Why?

Last Answer : By keeping yoke area 15-20% higher ,the flux density in the yoke is reduced, resulting into reduction in iron losses for yoke. The reduced core area results working flux density and needed to increase the number of turns.

What is yoke section of transformers?

Description : What is yoke section of transformers?

Last Answer : The sections of the core which connect the limbs are called yoke. The yoke is used to provide a closed path for the flux.

The following are yoke muscles: a. right medial rectus and left lateral rectus b. right inferior rectus and left superior rectus c. right superior rectus and left inferior oblique d. right superior oblique and left inferior rectus

Description : The following are yoke muscles: a. right medial rectus and left lateral rectus b. right inferior rectus and left superior rectus c. right superior rectus and left inferior oblique d. right superior oblique and left inferior rectus

Last Answer : right superior oblique and left inferior rectus

connects the main body to the plough to the Yoke a) beam b) saddle c) stool d) hammer

Description : connects the main body to the plough to the Yoke a) beam b) saddle c) stool d) hammer

Last Answer : beam

For MPI using the prods method which of the following statements is true: a) It may cause arc damage on the specimen material surface b) It requires fewer operators therefore is easier c) It can be used with ferritic and non-ferritic materials d) It is quicker than using a yoke type electromegnet

Description : For MPI using the prods method which of the following statements is true: a) It may cause arc damage on the specimen material surface b) It requires fewer operators therefore is easier c) ... be used with ferritic and non-ferritic materials d) It is quicker than using a yoke type electromegnet

Last Answer : a) It may cause arc damage on the specimen material surface

In transformers using hot rolled steel, the cross-section of the yoke is made about _____ greater than that of the core (a) 5 percent (b) 10 percent (c) 15 percent (d) 30 percent (e) none of the above

Description : In transformers using hot rolled steel, the cross-section of the yoke is made about _____ greater than that of the core (a) 5 percent (b) 10 percent (c) 15 percent (d) 30 percent (e) none of the above

Last Answer : (c) 15 percent

Explain the working of Scotch Yoke mechanism with neat sketch.

Description : Explain the working of Scotch Yoke mechanism with neat sketch.

Last Answer : Scotch yoke mechanism. This mechanism is used for converting rotary motion into a reciprocating motion. The inversion is obtained by fixing either the link 1 or link 3. In Fig. link 1 is fixed. In this ... link 4 (which corresponds to a frame) reciprocates. The fixed link 1 guides the frame

Draw a neat diagram of ‘Scotch Yoke Mechanism’. Explain its constructional features in brief.

Description : Draw a neat diagram of ‘Scotch Yoke Mechanism’. Explain its constructional features in brief.

Last Answer : Constructional Features of Scotch Yoke Mechanism: [1] In this mechanism, two sliding pairs and two turning pairs are used. So it is an inversion of Double Slider Crank Chain Mechanism. [2] It ... - Reciprocating Motion [3] The inversion is obtained by fixing either the Link 1 or Link 3. 

State functions of the armature core in DC machine and name material used for armature core.

Last Answer : Functions of armature core: 1) Support the armature winding which is placed in its slots. 2) Rotate as driven by the prime mover (generator) or as per the torque produced (motor).  Hence ... magnetic path to increase the magnitude of induced emf for a certain MMF created by the field winding. 

State any two applications of brushless DC motor.

Description : State any two applications of brushless DC motor. 

Last Answer : 1) Synthetic fibre drawing works.  2) Turn table drives in record players.  3) Spindle drives in hard disk circuits.  4) Computer peripheral equipments as plotters etc. 5) Gyroscope motors.  6) Biomedical machines as heart pumps. 

Application of DC Series Motor

Description : Application of DC Series Motor

Last Answer : 1. Electric traction 2. Cranes, 3. Passenger elevators, 4. Continuous conveyors, 5. Grinders, 6. Polishers,

If field current is decreased in shunt dc motor, the speed of the motor

Description : If field current is decreased in shunt dc motor, the speed of the motor (a) remains same. (b) increases. (c) decreases. (d) none of the above.

Last Answer : increases

What would happen if a DC motor was supplied with AC ?

Description : What would happen if a DC motor was supplied with AC ?

Last Answer : With three phase induction motor, humming and not rotate, but if single phase universal motor like air blower, home mixture, motor run on constant speed..speed variation not possible...

DC series motor should never be started at no-load. Justify.

Description : DC series motor should never be started at no-load. Justify. 

Last Answer : At no load the field current (which is also the armature current) is very small and hence the useful air-gap field flux. Also the torque is very small.  As N ∝ 1/Ф the speed rises to ... on the rotating parts they may get damaged. Hence DC series motor should never be started on no-load.

With the help of neat diagrams,explain the following methods of speed control in DC series motor. i) Field diverter method. ii) Armature diverter method.

Description : With the help of neat diagrams,explain the following methods of speed control in DC series motor. i) Field diverter method. ii) Armature diverter method.

Last Answer : (i) Field diverter method: - Resistance connected in parallel with field winding -By adjusting this resistance current can by diverted from field winding -Thus field current decreases and the speed can be ... decreased, the flux must increase and hence speed is decreased than the rated speed.

What is back emf in DC motor? Explain its significance.

Last Answer : Back emf: When the armature of DC motor rotates under the fixed magnetic field and cuts it, by Faraday's law an emf is induced in them. The induced emf acts in opposite direction to the ... the flow of armature current i.e. it automatically changes the armature current to meet load requirements. 

State the principle of operation of a dc motor.

Last Answer : Principle of operation of a dc motor: When a current carrying conductor is placed in a magnetic field, the conductor experiences the mechanical force. The magnitude of force is given by  F = BIL newton  where F – Force , B – Maximum flux density , I – Current , L – Active length of conductor

With the help of necessary sketch, explain in brief the working of brushless DC motor.

Description : With the help of necessary sketch, explain in brief the working of brushless DC motor. 

Last Answer : Constructional Diagram of Brushless DC Motor: Working of brushless DC motor: The brushless DC motor is the combination of a permanent excited synchronous motor and a frequency ... Suitable PWM techniques allow regenerative breaking, which increases dynamic and efficiency of the drive. 

List the various losses on a DC Motor.

Description : List the various losses on a DC Motor. 

Last Answer : The various losses on a DC Motor: 1) Winding losses (Copper losses): i) Armature winding losses ii) Shunt field losses iii) Series field losses 2) Core losses (iron losses): 3) Brush contact losses: 4) Windage and frictional (Mechanical losses):

A separately excited dc motor operating in first quadrant is fed from 3-phase semi -converter free -wheeling

Description : A separately excited dc motor operating in first quadrant is fed from 3-phase semi -converter free -wheeling diode is open circuited, then the motor :  (A) can be operated in first quadrant (B) ... in first & second quadrants (C) can be operated in first & fourth quadrants (D) cannot be operated

Last Answer : A separately excited dc motor operating in first quadrant is fed from 3-phase semi -converter free -wheeling diode is open circuited, then the motor : can be operated in first & fourth quadrants

In a DC motor, it is important to place the brushes along ______

Description : In a DC motor, it is important to place the brushes along ______ A) Magnetic Neutral Axis B) Normal Geometric Axis C) Nominal Geometric Axis D) None of these

Last Answer : In a DC motor, it is important to place the brushes along Magnetic Neutral Axis

In a 4-pole wave winding connected dc motor, the cross-magnetizing AT/pole for a brush shift of θ radians

Description : In a 4-pole wave winding connected dc motor, the cross-magnetizing AT/pole for a brush shift of θ radians (A) Armature amp-conductors × (θ/360o) (B) Armature amp-turns × (θ/360o) (C) Armature amp-conductors × (1/4 - θ/360o) (D) Armature amp-conductors × (1/8 - θ/360o)

Last Answer : In a 4-pole wave winding connected dc motor, the cross-magnetizing AT/pole for a brush shift of θ radians Armature amp-conductors × (1/8 - θ/360o)

In a differentially compounded dc motor

Description : In a differentially compounded dc motor (A) the speed is constant as the torque increases (B) the speed falls non-linearly as the torque increases (C) the speed increases non-linearly as the torque increases (D) the flux increases as the load increases

Last Answer : In a differentially compounded dc motor the speed increases non-linearly as the torque increases

A large dc motor is required to control the speed of the blower from a 3 -phase ac source. The suitable ac to ...

Description : A large dc motor is required to control the speed of the blower from a 3 -phase ac source. The suitable ac to dc converter is, 3 -phase (a) Fully controlled bridge converter ( ... bridge converter with freewheeling diode (c) Half controlled bridge converter (d) Converter pair in sequence control

Last Answer : a fullu control

The dc motor used for intermittent high torque loads is

Description : The dc motor used for intermittent high torque loads is  (1) dc series motor (2) dc shunt motor (3) differential compound motor (4) cumulative compound motor

Last Answer : 4 cumulative compound motor

A cumulative dc compound motor runs at 1500 rpm. on full load. If its series field is short-circuited, its speed

Description : A cumulative dc compound motor runs at 1500 rpm. on full load. If its series field is short-circuited, its speed  (1) becomes zero (2) remains unchanged (3) increases (4) decreases

Last Answer : Increases. As it's cumulative compound motor, both series and shunt field both assist each other. If series field is short circuited, the overall field strength will decrease and atop of that ... speed is inversely proportional to field strength.  So, the speed will increase overall.

A separately excited dc motor is required to be controlled, from a 3-phase supply, for its operation in the first...

Description : A separately excited dc motor is required to be controlled, from a 3-phase supply, for its operation in the first quadrant only. The most preferred converter would be  (a) 3-phase fully controlled ... converter with free wheel diode (c) 3-phase dual converter (d) 3-phase half wave converter 

Last Answer : A

Armature shunting method of speed control of dc shunt motor is preferred over annature resistance method...

Description : Armature shunting method of speed control of dc shunt motor is preferred over annature resistance method due to:  (1) Better speed regulation (2) Less loss in external resistance (3) Simplicity in control circuit (4) Reduced cost of controller

Last Answer : Armature shunting method of speed control of dc shunt motor is preferred over annature resistance method due to: Better speed regulation.

What is the order of the characteristic equation of an armature controlled DC motor?

Description : What is the order of the characteristic equation of an armature controlled DC motor?  (A) First order equation (B) Second order equation (C) Zero order equation (D) Third order equation 

Last Answer : third order

Why a dc series motor has a high starting torque?

Description : Why a dc series motor has a high starting torque?

Last Answer : motor

What is the principle of DC motor?

Description : What is the principle of DC motor?

Last Answer : principle

Use of dc motor

Last Answer : There are three types of self excited DC motor 1. series wound 2. shunt wound 3, compound wound 1.Applications of DC series motor are : DC ... DC compound motor is use for punches. These are some applications of DC compound motor.

What's is the self excited dc motor?

Last Answer : Self excited Dc motor have same source of power to armature and field winding

Give two basic speed control scheme of DC shunt motor?

Description : Give two basic speed control scheme of DC shunt motor?

Last Answer : Answer: 1. By using flux control method: in this method a rheostat is connected across the field wdg to control the field current. So by changing the current the flux produced by the field wdg can ... ) can be varied, and since speed is directly proportional to Eb-IaRa the speed can be controlled.

A flickering ground detection lamp on a DC system would indicate a _____________. A. multiple-ground condition in the distribution system B. ground in an armature coil of an operating machine C. ground in a motor accompanied with a short D. short between two adjacent bars of the generator commutator

Description : A flickering ground detection lamp on a DC system would indicate a _____________. A. multiple-ground condition in the distribution system B. ground in an armature coil of an operating machine C. ground in a motor accompanied with a short D. short between two adjacent bars of the generator commutator

Last Answer : Answer: B

The speed-torque characteristics of a DC series motor are approximately similar to those of the _________motor. (A) universal (B) synchronous (C) DC shunt (D) two-phase

Description : The speed-torque characteristics of a DC series motor are approximately similar to those of the _________motor. (A) universal (B) synchronous (C) DC shunt (D) two-phase

Last Answer : Ans: A Universal motor has same characteristics as DC series motor and also known as an a.c series motor.

A stepper motor is (A) a dc motor. (B) a single-phase ac motor. (C) a multi-phase motor. (D) a two phase motor.

Description : A stepper motor is (A) a dc motor. (B) a single-phase ac motor. (C) a multi-phase motor. (D) a two phase motor.

Last Answer : Ans: D Stepper motor works on 1-phase-ON or 2-phase –ON modes of operation

The most suitable servomotor for low power applications is (A) a dc series motor. (B) a dc shunt motor. (C) an ac two-phase induction motor. (D) an ac series motor.

Description : The most suitable servomotor for low power applications is (A) a dc series motor. (B) a dc shunt motor. (C) an ac two-phase induction motor. (D) an ac series motor.

Last Answer : (B) a dc shunt motor.

Selecting a correct DC stepper motor for a project?

Description : Selecting a correct DC stepper motor for a project?

Last Answer : You will need to calculate the moment of inertia of the shaft you are turning so you can determine the required torque. You will get that after you determine the peak acceleration from the velocity ... Once you have acceleration, displacement, and moment of inertia you can size the motor for power.

What is DC Motor ?

Description : What is DC Motor ?

Last Answer : : An electric motor that receives electricity from a DC power source is therefore a DC motor.

What battery is recommended with a 3 volt DC motor?

Description : What battery is recommended with a 3 volt DC motor?

Last Answer : Need answer

Why is it dangerous yo supply power to an unloaded series connected dc motor?

Description : Why is it dangerous yo supply power to an unloaded series connected dc motor?

Last Answer : Need answer

If the supply voltage is 220 volts 60 Hz, what is the operating voltage of the motor controller circuitry illustrated? EL-0011 A. 110 volts DC B. 110 volts AC C. 220 volts DC D. 220 volts AC

Description : If the supply voltage is 220 volts 60 Hz, what is the operating voltage of the motor controller circuitry illustrated? EL-0011 A. 110 volts DC B. 110 volts AC C. 220 volts DC D. 220 volts AC

Last Answer : Answer: D

When using a megohmmeter to determine which shunt field coil is grounded in a DC machine, you must ____________. A. insulate the field frame from the ship's hull B. disconnect each shunt field coil before testing C. use a motor driven high capacity megohmmeter D. remove all main line lead connections before testing

Description : When using a megohmmeter to determine which shunt field coil is grounded in a DC machine, you must ____________. A. insulate the field frame from the ship's hull B. disconnect each shunt ... C. use a motor driven high capacity megohmmeter D. remove all main line lead connections before testing

Last Answer : Answer: B