Microprocessor is the ______ of the computer and it perform all the computational tasks 

A. main B. heart C. important D. simple

Heart

1 Answer

Answer :

Microprocessor is the heart of the computer and it performs all the computational tasks

Related questions

Description : The purpose of the microprocessor is to control ______  A. memory B. switches C. processing D. tasks

Last Answer : The purpose of the microprocessor is to control memory 

Description : A microprocessor is a _______ chip integrating all the functions of a CPU of a computer.  A. multiple B. single C. double D. triple

Last Answer : A microprocessor is a single chip integrating all the functions of a CPU of a computer.

Description : The 16 bit flag of 8086 microprocessor is responsible to indicate ___________ A. the condition of result of ALU operation B. the condition of memory C. the result of addition D. the result of subtraction 

Last Answer : The 16 bit flag of 8086 microprocessor is responsible to indicate the condition of result of ALU operation

Description : In 8086 microprocessor , the address bus is ________ bit wide A. 12 bit B. 10 bit C. 16 bit D. 20 bit

Last Answer : In 8086 microprocessor, the address bus is 20 bit

Description : The microprocessor can read/write 16 bit data from or to ________ A. memory B. I /O device C. processor D. register

Last Answer : The microprocessor can read/write 16 bit data from or to memory 

Description : The intel 8086 microprocessor is a _______ processor A. 8 bit B. 16 bit C. 32 bit D. 4 bit

Last Answer : The intel 8086 microprocessor is a 16 bit processor 

Description : Microprocessor is a/an _______ circuit that functions as the CPU of the compute  A. electronic B. mechanic C. integrating D. processing

Last Answer : Microprocessor is a/an electronic  circuit that functions as the CPU of the compute 

Description : The 8085 Microprocessor has A) 8-bits Data bus and 16-bits Address bus B) 8-bits Data bus and 8-bits Address bus C) 16-bits Data bus and 16-bits Address bus D) 32-bits Data bus and 8-bits Address bus 

Last Answer : B) 8-bits Data bus and 8-bits Address bus. 

Description :  In a 16-bit microprocessor, a single word is A) 16 bit data B) 32 bit data C) 8 bit data D) 64 bit data 

Last Answer :  In a 16-bit microprocessor, a single word is 16 bit data

Description : In the 8085A Microprocessor, arithmetic and logical operations are performed through which of the following? A) Stack B) ALU C) I/O D) Register 

Last Answer : In the 8085A Microprocessor, arithmetic and logical operations are performed through which of the following? A) Stack B) ALU C) I/O D) Register 

Description : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs

Last Answer : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs

Description : In 8085 microprocessor, how many T-states does OPCODE FETCH machine cycle normally require (i.e., when HOLD and WAIT signals are NOT forced)? A) 4 to 6 B) 3 to 8 C) 2 to 3 D) 8 to 12 

Last Answer : In 8085 microprocessor, how many T-states does OPCODE FETCH machine cycle normally require (i.e., when HOLD and WAIT signals are NOT forced)? A) 4 to 6 B) 3 to 8 C) 2 to 3 D) 8 to 12 

Description : Then number of T-states of the instruction STA in 8085 microprocessor is A) 10 B) 12 C) 13 D) 16 

Last Answer : Then number of T-states of the instruction STA in 8085 microprocessor is 13 

Description : What is the Power Supply specification for 8085AH microprocessor? A) Single +5V supply with 10% voltage margins B) Dual +5V supply with 10% voltage margins C) Single +10V supply with 5% voltage margins D) Dual +5V supply with 5% voltage margins 

Last Answer : What is the Power Supply specification for 8085AH microprocessor? A) Single +5V supply with 10% voltage margins B) Dual +5V supply with 10% voltage margins C) Single +10V supply with 5% voltage margins D) Dual +5V supply with 5% voltage margins 

Description : What is the size of memory which can be accessed by direct accessing in 8085 microprocessor? A) 64 kB B) 4 kB C) 128 kB D) 128 MB 

Last Answer : What is the size of memory which can be accessed by direct accessing in 8085 microprocessor? A) 64 kB B) 4 kB C) 128 kB D) 128 MB 

Description : Which of the following instructions is not available in 8085 microprocessor? (A) LDA 3850 (B) XTHL (C) push PSW (D) LDAXH

Last Answer : Which of the following instructions is not available in 8085 microprocessor? (A) LDA 3850 (B) XTHL (C) push PSW (D) LDAXH

Description : What is the difference between a microcontroller and a microprocessor?

Last Answer : Compare microprocessor and microcontroller Microprocessor Microcontroller 1)Inbuilt RAM and ROM 1)Do not have inbuilt RAM or ROM 2)Inbuilt timer 2)Doesn't have inbuilt timer ... same memory 6)Many Multifunction pins on the IC  6)less multifunction Pins on IC.

Description : programs designed to perform specific tasks is known as a. system software b. application software c. utility programs d. operating system

Last Answer : c. utility programs

Description : Artificial intelligence is A . It uses machine-learning techniques. Here program can learn From past experience and adapt themselves to new situations B. Computational procedure that takes some ... performs tasks that would require intelligence when performed by humans D . None of these

Last Answer : C. Science of making machines performs tasks that would require intelligence when performed by humans

Description : The work of EU is ________ A. encoding B. decoding C. processing D. calculations 

Last Answer : The work of EU is decoding 

Description : A modern electronic computer is a machine that is meant for a. Doing quick mathematical calculations b. Input, storage, manipulation and outputting of data c. Electronic data processing d. Performing repetitive tasks accurately

Last Answer : b. Input, storage, manipulation and outputting of data

Description : The capacity to perform multiple tasks simultaneously is termed as ______ (A) Diligence (B) Versatility (C) Reliability (D) All of the Above

Last Answer : (B) Versatility

Description : Which corporation decided to use 8088 microprocessor in personal computer: a. IBM b. CRT c. PMN d. SPS

Last Answer : a. IBM

Description : A computer which has the microprocessor as______ is called as a microcomputer: a. CPU b. ALU c. RU

Last Answer : a. CPU

Description : Which system communicates with the outside word via the I/O devices interfaced to it: a. Microprocessor b. Microcomputer c. Digital computer d. All of these

Last Answer : b. Microcomputer

Description : Microprocessor is the _____ of computer: a. Hand b. Heart c. Brain d. Leg

Last Answer : c. Brain

Description : A stack is a. an 8-bit register in the microprocessor b. a 16-bit register in the microprocessor c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer

Last Answer : c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer

Description : The two major types of computer chips are a. External memory chip b. Primary memory chip c. Microprocessor chip d. Both b and c

Last Answer : d. Both b and c

Description : The system unit of a personal computer typically contains all of the following except: a. Microprocessor b. Disk controller c. Serial interface d. Modem

Last Answer : d. Modem

Description :  In a microprocessor, the address of the next instruction to be executed, is stored in A) Stack pointer B) Address latch C) Program counter D) General purpose register

Last Answer :  In a microprocessor, the address of the next instruction to be executed, is stored in Program counter

Description : In an 8085 microprocessor, after the execution of XRA A instruction A) the carry flag is set B) the accumulator contains FFH C) the zero flag is set D) the accumulator contents are shifted left by one bit

Last Answer :  In an 8085 microprocessor, after the execution of XRA A instruction the zero flag is set 

Description : In 8085 microprocessor, the value of the most significant bit of the result following the execution of any arithmetic of Boolean instruction is stored in the (1) Carry status flag (2) Auxiliary carry status flag (3) Sign status flag (4) Zero status flag

Last Answer : In 8085 microprocessor, the value of the most significant bit of the result following the execution of any arithmetic of Boolean instruction is stored in the Sign status flag

Description : 8085 microprocessor has ________ individual flags during arithmetic and logic operations.

Last Answer : 8085 microprocessor has 5 individual flags during arithmetic and logic operations.

Description : To read or write a complete word from / to the memory in 8086 microprocessor and if it is located at an even address, the number of Read or Write cycles required is

Last Answer : To read or write a complete word from / to the memory in 8086 microprocessor and if it is located at an even address, the number of Read or Write cycles required is one

Description : In a microprocessor the service routine for a certain interrupt starts from a fixed location of memory which cannot be externally set but the interrupt can be delayed or rejected. Such an interrupt is 

Last Answer : In a microprocessor the service routine for a certain interrupt starts from a fixed location of memory which cannot be externally set but the interrupt can be delayed or rejected. Such an interrupt is Maskable and vectored

Description : When a program is being executed in an 8085 microprocessor, its Program Counter contains  (A) the number of instructions in the current program that have already been executed (B) the total number ... is being currently executed (D) the memory address of the instruction that is to be executed next

Last Answer : When a program is being executed in an 8085 microprocessor, its Program Counter contains the memory address of the instruction that is to be executed next

Description : In an 8085 microprocessor, the contents of the Accumulator, after the following instructions are executed will become   XRA A   MVI B, F0 H   SUB B  (A) 01 H (B) 0F H (C) F0 H (D) 10 H

Last Answer : In an 8085 microprocessor, the contents of the Accumulator, after the following instructions are executed will become   XRA A   MVI B, F0 H   SUB B  (A) 01 H (B) 0F H (C) F0 H (D) 10 H

Description : Chock Speed of which Intel microprocessor is 3 GHz?  a. Core 2 Duo b. Core 2 Quad c. Pentium 4 d. Pentium III 

Last Answer : Chock Speed of which Intel microprocessor is 3 GHz?  a. Core 2 Duo b. Core 2 Quad c. Pentium 4 d. Pentium III 

Description : Intel's 8085 microprocessor chip contains  (A) seven 8 bit registers (B) 8 seven bits registers (C) seven 7 bit registers (D) eight 8 bit registers.

Last Answer : Intel's 8085 microprocessor chip contains seven 8 bit registers

Description : Consider the following program segment with 8085 microprocessor  LXI H 3600H  MOV A, M  HLT  The MOV instruction involves (a) indirect addressing (b) immediate addressing (c) implicit addressing (d) direct addressing

Last Answer : Consider the following program segment with 8085 microprocessor  LXI H 3600H  MOV A, M  HLT  The MOV instruction involves (a) indirect addressing (b) immediate addressing (c) implicit addressing (d) direct addressing

Description : To establish a communication between 8085 microprocessor and 8255 Programmable Peripheral Interface chip. the status of the chip select input would be  (a) TRISTATE (b) HIGH (b) LOW (d) DON’T CARE 

Last Answer : To establish a communication between 8085 microprocessor and 8255 Programmable Peripheral Interface chip. the status of the chip select input would be  (a) TRISTATE (b) HIGH (b) LOW (d) DON’T CARE 

Description : Which flag does not change by the execution of the instruction DCR B in 8085 microprocessor ?  (a) Parity (b) Carry (c) Zero (d) Sign

Last Answer : Which flag does not change by the execution of the instruction DCR B in 8085 microprocessor ?  (a) Parity (b) Carry (c) Zero (d) Sign

Description : The zero flag of 8085 microprocessor is to be set keeping the content of the accumulator unchanged. Which instruction is to be used?  (a) MOV A,A (b) ANI 00H (c) XRA A (d) CMP A

Last Answer : The zero flag of 8085 microprocessor is to be set keeping the content of the accumulator unchanged. Which instruction is to be used?  (a) MOV A,A (b) ANI 00H (c) XRA A (d) CMP A

Description : The 8085 is a – microprocessor   1. 4 bit 2. 8 bit 3. 16 bit 4. 32 bit 

Last Answer : The 8085 is a 8 bit microprocessor

Description : The proper definition of a modern digital computer is a. An electronic automated machine that can solve problems involving words and numbers b. A more sophistic and modified electronic pocket calculator c. Any machine that can perform mathematical operations d. A machine that works on binary code

Last Answer : d. A machine that works on binary code

Description : How does the microprocessor differentiate between data and instruction

Last Answer : When the first m/c code of an instruction is fetched and decoded in the instruction register, the microprocessor recognizes the number of bytes required to fetch the entire ... will be considered as data & the byte after the data will be treated as the next instruction.

Description : List the four instructions which control the interrupt structure of the 8085 microprocessor.

Last Answer : • DI ( Disable Interrupts ) • EI ( Enable Interrupts ) • RIM ( Read Interrupt Masks ) • SIM ( Set Interrupt Masks )

Description : How many operations are there in the instruction set of 8085 microprocessor?

Last Answer : There are 74 operations in the 8085 microprocessor.

Description : List the 16 – bit registers of 8085 microprocessor.

Last Answer : Stack pointer (SP) and Program counter (PC).

Description : List few applications of microprocessor-based system.

Last Answer : It is used: i. For measurements, display and control of current, voltage, temperature, pressure, etc. ii. For traffic control and industrial tool control. iii. For speed control of machines.