Coke used for the production of calcium carbide should have (A) Low ash content (B) Low ignition temperature (C) High electrical resistivity (D) All (A), (B) and (C)

Coke used for the production of calcium carbide should have
(A) Low ash content
(B) Low ignition temperature
(C) High electrical resistivity
(D) All (A), (B) and (C)
by

1 Answer

Answer :

(D) All (A), (B) and (C)
by

Related questions

Commercial production of calcium carbide requires limestone and __________ as raw materials. (A) Coke (B) Sand (C) Soda ash (D) Fuel oil

Description : Commercial production of calcium carbide requires limestone and __________ as raw materials. (A) Coke (B) Sand (C) Soda ash (D) Fuel oil

Last Answer : (B) Sand

A coal containing high amount of volatile matter will have (A) Low ignition temperature (B) Very little ash content (C) High fusion point of its ash (D) Low adiabatic flame temperature

Description : A coal containing high amount of volatile matter will have (A) Low ignition temperature (B) Very little ash content (C) High fusion point of its ash (D) Low adiabatic flame temperature

Last Answer : (A) Low ignition temperature

In high temperature carbonisation (as compared to low temperature carbonisation) of coal, the (A) Gas yield is less (B) Tar yield is more (C) Ignition temperature of coke produced is less (D) Aromatic content of tar produced is more

Description : In high temperature carbonisation (as compared to low temperature carbonisation) of coal, the (A) Gas yield is less (B) Tar yield is more (C) Ignition temperature of coke produced is less (D) Aromatic content of tar produced is more

Last Answer : (D) Aromatic content of tar produced is more

A coal having higher volatile matter content will necessarily have lower (A) Ash fusion temperature (B) Calorific value (C) Ignition temperature (D) Caking index

Description : A coal having higher volatile matter content will necessarily have lower (A) Ash fusion temperature (B) Calorific value (C) Ignition temperature (D) Caking index

Last Answer : (C) Ignition temperature

Ignition temperature decreases progressively from anthracite to lignite, because (A) Volatile matter content increases (B) Carbon content decreases (C) Moisture content increases (D) Ash content increases

Description : Ignition temperature decreases progressively from anthracite to lignite, because (A) Volatile matter content increases (B) Carbon content decreases (C) Moisture content increases (D) Ash content increases

Last Answer : (A) Volatile matter content increases

In primitive days, __________ was being manufactured by LeblancProcess.(A) Alum(B) Washing soda(C) Soda ash(D) Calcium carbide

Description : In primitive days, __________ was being manufactured by Leblanc Process. (A) Alum (B) Washing soda (C) Soda ash (D) Calcium carbide

Last Answer : (C) Soda ash

A coal having higher volatile matter content, has lower (A) Smoking tendency on burning (B) Coke oven gas yield on carbonisation (C) Chance of catching fire during storage in open space (D) Ignition temperature

Description : A coal having higher volatile matter content, has lower (A) Smoking tendency on burning (B) Coke oven gas yield on carbonisation (C) Chance of catching fire during storage in open space (D) Ignition temperature

Last Answer : (D) Ignition temperature

A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Description : A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Last Answer : (A) Sulphur & phosphorous content

During coal carbonisation process, the conversion of semi-coke to coke is accompanied by an increase in the __________ of the mass. (A) Density (B) Porosity (C) Electrical resistivity (D) None of these

Description : During coal carbonisation process, the conversion of semi-coke to coke is accompanied by an increase in the __________ of the mass. (A) Density (B) Porosity (C) Electrical resistivity (D) None of these

Last Answer : (A) Density

The reason for excessive clinker formation in gas producers is the (A) Use of coal/coke containing a high % of fines and ash (B) Use of fuel having too low an ash fusion temperature (C) Development of hot spots in the fuel bed and an abnormally high rate of gasification (D) All (A), (B) and (C)

Description : The reason for excessive clinker formation in gas producers is the (A) Use of coal/coke containing a high % of fines and ash (B) Use of fuel having too low an ash fusion temperature (C) Development of hot spots in the fuel bed and an abnormally high rate of gasification (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

For long flame and easy ignition, the coal used should have (A) High volatile matter (B) Low ash (C) High calorific value (D) High ash

Description : For long flame and easy ignition, the coal used should have (A) High volatile matter (B) Low ash (C) High calorific value (D) High ash

Last Answer : (A) High volatile matter

Increase in ash content of blast furnace coke (A) Reduces its consumption in the furnace (B) Increases its consumption in the furnace (C) Does not affect its consumption in the furnace (D) Decreases its hardness and abrasion resistance

Description : Increase in ash content of blast furnace coke (A) Reduces its consumption in the furnace (B) Increases its consumption in the furnace (C) Does not affect its consumption in the furnace (D) Decreases its hardness and abrasion resistance

Last Answer : (B) Increases its consumption in the furnace

Degree of carbonisation of coal during coke making can be roughly judged by the __________ of the coke produced. (A) Colour (B) Moisture content (C) Ash content (D) Volatile matter

Description : Degree of carbonisation of coal during coke making can be roughly judged by the __________ of the coke produced. (A) Colour (B) Moisture content (C) Ash content (D) Volatile matter

Last Answer : (D) Volatile matter

Out of the following, which is the most important parameter for the blast furnace grade coke? (A) CSR & CRI (B) Ash content (C) Moisture content (D) Volatile matter content

Description : Out of the following, which is the most important parameter for the blast furnace grade coke? (A) CSR & CRI (B) Ash content (C) Moisture content (D) Volatile matter content

Last Answer : (A) CSR & CRI

Ash content in the coke produced from a coking coal having 20% ash may be around __________ percent. (A) 6 (B) 12 (C) 18 (D) 24

Description : Ash content in the coke produced from a coking coal having 20% ash may be around __________ percent. (A) 6 (B) 12 (C) 18 (D) 24

Last Answer : (D) 24

Purity of coke means that, it is high in carbon and low in(A) Volatiles(B) Ash(C) Iron(D) Moisture

Description : Purity of coke means that, it is high in carbon and low in (A) Volatiles (B) Ash (C) Iron (D) Moisture

Last Answer : (A) Volatiles

Which of the following is unsuitable fuel for producer gas manufacture? (A) Coke (B) Anthracite (C) Coal having low fusion point of its ash (D) Coal having high fusion point of its ash

Description : Which of the following is unsuitable fuel for producer gas manufacture? (A) Coke (B) Anthracite (C) Coal having low fusion point of its ash (D) Coal having high fusion point of its ash

Last Answer : (C) Coal having low fusion point of its ash

A good metallurgical coke (A) Should have high porosity (B) Should be brittle (C) Must contain moderate quantities of ash, moisture, sulphur and volatile matters (D) Should have low fusion point of its ash

Description : A good metallurgical coke (A) Should have high porosity (B) Should be brittle (C) Must contain moderate quantities of ash, moisture, sulphur and volatile matters (D) Should have low fusion point of its ash

Last Answer : (A) Should have high porosity

Higher percentage of ash in coal meant for the production of metallurgical grade coke (A) Decreases the hardness of coke (B) Decreases the abrasion resistance of coke (C) Causes brittleness in steel (D) None of these

Description : Higher percentage of ash in coal meant for the production of metallurgical grade coke (A) Decreases the hardness of coke (B) Decreases the abrasion resistance of coke (C) Causes brittleness in steel (D) None of these

Last Answer : (D) None of these

Which of the following constituents of coal is the most important in the production of coke? (A) Moisture (B) Ash (C) Volatiles (D) Carbon

Description : Which of the following constituents of coal is the most important in the production of coke? (A) Moisture (B) Ash (C) Volatiles (D) Carbon

Last Answer : (D) Carbon

Commercial production of soda ash by Solvay process requires limestone, __________ as raw materials. (A) Coke and sand (B) Brine and coal (C) Coke and caustic soda (D) None of these

Description : Commercial production of soda ash by Solvay process requires limestone, __________ as raw materials. (A) Coke and sand (B) Brine and coal (C) Coke and caustic soda (D) None of these

Last Answer : (B) Brine and coal

Dielectric (A) Is an electrical insulating material (B) Of low resistivity is preferred (C) Should have high thermal conductivity (D) Need not defy the corrosive action of chemicals

Description : Dielectric (A) Is an electrical insulating material (B) Of low resistivity is preferred (C) Should have high thermal conductivity (D) Need not defy the corrosive action of chemicals

Last Answer : (A) Is an electrical insulating material

Blast furnace gas compared to coke oven gas has (A) Lower ignition temperature (B) Narrower limit of inflammability (C) Higher calorific value (D) Lower theoretical flame temperature

Description : Blast furnace gas compared to coke oven gas has (A) Lower ignition temperature (B) Narrower limit of inflammability (C) Higher calorific value (D) Lower theoretical flame temperature

Last Answer : (D) Lower theoretical flame temperature

Accurate determination of water content, is made by (A) Calcium carbide method (B) Sand bath method (C) Alcohol method (D) Oven-drying method

Description : Accurate determination of water content, is made by (A) Calcium carbide method (B) Sand bath method (C) Alcohol method (D) Oven-drying method

Last Answer : (D) Oven-drying method

For proper field control, which of the following methods is best suited for quick determination of water content of a soil mass? (A) Oven drying method (B) Sand bath method (C) Alcohol method (D) Calcium carbide method

Description : For proper field control, which of the following methods is best suited for quick determination of water content of a soil mass? (A) Oven drying method (B) Sand bath method (C) Alcohol method (D) Calcium carbide method

Last Answer : Answer: Option D

Which of the following methods is most accurate for the determination of the water content of soil? (A) Oven drying method (B) Sand bath method (C) Calcium carbide method (D) Pycnometer method

Description : Which of the following methods is most accurate for the determination of the water content of soil? (A) Oven drying method (B) Sand bath method (C) Calcium carbide method (D) Pycnometer method

Last Answer : Option A

You are given a sample of soil containing coarse grains to determine its water content, you will use (A) Pycnometer (B) Oven-drying method (C) Calcium carbide method (D) Alcohol method

Description : You are given a sample of soil containing coarse grains to determine its water content, you will use (A) Pycnometer (B) Oven-drying method (C) Calcium carbide method (D) Alcohol method

Last Answer : Answer: Option A

Coke oven gas produced by high temperature carbonisation of coal (as compared to that produced by low temperature carbonisation), has (A) Higher calorific value (B) Lower hydrogen content (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Coke oven gas produced by high temperature carbonisation of coal (as compared to that produced by low temperature carbonisation), has (A) Higher calorific value (B) Lower hydrogen content (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

In low temperature carbonisation of coal as compared to high temperature carbonisation __________ produced is less. (A) Difference in gross & net calorific value of the coke oven gas (B) Free carbon content in tar (C) Yield percentage of coke (D) Yield of ammonia present in coke oven gas

Description : In low temperature carbonisation of coal as compared to high temperature carbonisation __________ produced is less. (A) Difference in gross & net calorific value of the coke oven gas (B) Free carbon content in tar (C) Yield percentage of coke (D) Yield of ammonia present in coke oven gas

Last Answer : (A) Difference in gross & net calorific value of the coke oven gas

In high temperature carbonisation of coal compared to low temperature carbonisation (A) Yield of ammonia is less (B) Aromatic content of tar is low (C) H2 content in the coke oven gas is more (D) Calorific value of the coke oven gas is lower

Description : In high temperature carbonisation of coal compared to low temperature carbonisation (A) Yield of ammonia is less (B) Aromatic content of tar is low (C) H2 content in the coke oven gas is more (D) Calorific value of the coke oven gas is lower

Last Answer : (C) H2 content in the coke oven gas is more

The temperature in the calcium carbide furnace is __________ °C. (A) 200-300 (B) 700-850 (C) 2000-2200 (D) 4000-4500

Description : The temperature in the calcium carbide furnace is __________ °C. (A) 200-300 (B) 700-850 (C) 2000-2200 (D) 4000-4500

Last Answer : (C) 2000-2200

Beehive coke ovens are made of __________ bricks.(A) Silica (B) Fireclay (C) Silicon carbide (D) Corundum

Description : Beehive coke ovens are made of __________ bricks. (A) Silica (B) Fireclay (C) Silicon carbide (D) Corundum

Last Answer : (A) Silica

Ceramic recuperators are generally made of (A) Silicon carbide (B) Calcium carbide (C) Fireclay bricks (D) High alumina bricks

Description : Ceramic recuperators are generally made of (A) Silicon carbide (B) Calcium carbide (C) Fireclay bricks (D) High alumina bricks

Last Answer : (A) Silicon carbide

High ash coals (A) Are soft & friable (poor strength and size stability) (B) Require longer time of carbonisation as ash offers resistance to heat transfer (C) Produce larger quantity of coke oven gas (D) None of these

Description : High ash coals (A) Are soft & friable (poor strength and size stability) (B) Require longer time of carbonisation as ash offers resistance to heat transfer (C) Produce larger quantity of coke oven gas (D) None of these

Last Answer : (A) Are soft & friable (poor strength and size stability)

Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct process of by-product recovery (C) A high swelling index number of coking coal indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas

Description : Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct ... indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas

Last Answer : (C) A high swelling index number of coking coal indicates poor caking properties of coal

High ash containing coke (A) Produces more slag when used in the blast(B) Has poor strength and abrasion resistance(C) Is desirable in producer gas manufacture(D) None of these furnace

Description : High ash containing coke (A) Produces more slag when used in the blast furnace (B) Has poor strength and abrasion resistance (C) Is desirable in producer gas manufacture (D) None of these

Last Answer : (A) Produces more slag when used in the blast furnace

The advantages of firing pulverised coal in the furnace lies in the fact that, it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel consumption (D) All (A), (B) and (C)

Description : The advantages of firing pulverised coal in the furnace lies in the fact that, it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel consumption (D) All (A), (B) and (C)

Last Answer : (C) Accelerates the burning rate and economises on fuel consumption

A good quality coal should have (A) Low fusion point of ash (B) High ash content (C) High sulphur (D) None of these

Description : A good quality coal should have (A) Low fusion point of ash (B) High ash content (C) High sulphur (D) None of these

Last Answer : (D) None of these

Fat' coal means a coal having (A) Low calorific value (B) High volatile matter (C) Low ash content

Description : Fat' coal means a coal having (A) Low calorific value (B) High volatile matter (C) Low ash content

Last Answer : (B) High volatile matter

The advantage of firing pulverised coal in the furnace lies in the fact, that it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal(C) Accelerates the burning rate and economises on fuel combustion(D) All (A), (B) and (C)

Description : The advantage of firing pulverised coal in the furnace lies in the fact, that it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel combustion (D) All (A), (B) and (C)

Last Answer : (C) Accelerates the burning rate and economises on fuel combustion

Coals used for the generation of producer gas should have (A) High caking index (B) Low fusion point of ash (C) High volatile matter content (D) Very low ash content (8-10%)

Description : Coals used for the generation of producer gas should have (A) High caking index (B) Low fusion point of ash (C) High volatile matter content (D) Very low ash content (8-10%)

Last Answer : (C) High volatile matter content

A coal with high ash content (A) Has higher calorific value (B) Is harder and stronger(C) Is not subjected to washing(D) Has low quantity of mineral matter

Description : A coal with high ash content (A) Has higher calorific value (B) Is harder and stronger (C) Is not subjected to washing (D) Has low quantity of mineral matter

Last Answer : (B) Is harder and stronger

A good quality coal should have (A) Low fusion point of ash (B) High ash content (C) High sulphur content (D) None of these

Description : A good quality coal should have (A) Low fusion point of ash (B) High ash content (C) High sulphur content (D) None of these

Last Answer : (D) None of these

How is silicon carbide formed? OR What happens when silicon and coke are heated?

Description : How is silicon carbide formed? OR What happens when silicon and coke are heated?

Last Answer : When a mixture of silicon and coke is heated in an electric furnace, silicon carbide is formed. It is an endothermic reaction. Si + C SiC

Coke oven regenerators are made of __________ bricks. (A) Fire clay (B) Silica (C) Low thermal conductivity (D) High electrical conductivity

Description : Coke oven regenerators are made of __________ bricks. (A) Fire clay (B) Silica (C) Low thermal conductivity (D) High electrical conductivity

Last Answer : (A) Fire clay

Performance number of a liquid fuel is related to its (A) Wax content (B) Spontaneous ignition temperature (C) Knocking tendency (D) Sulphur content

Description : Performance number of a liquid fuel is related to its (A) Wax content (B) Spontaneous ignition temperature (C) Knocking tendency (D) Sulphur content

Last Answer : (B) Spontaneous ignition temperature

The optimum percentage of excess air for combustion depends upon the__________ of the fuel.(A) Type (solid, liquid or gaseous)(B) Calorific value(C) Sulphur content(D) Ignition temperature

Description : The optimum percentage of excess air for combustion depends upon the__________ of the fuel. (A) Type (solid, liquid or gaseous) (B) Calorific value (C) Sulphur content (D) Ignition temperature

Last Answer : (A) Type (solid, liquid or gaseous)

Carbon supply in pack carburising process is in the form of (A) Charcoal (B) Calcium carbide (C) Hydrocarbon oil (D) Graphite

Description : Carbon supply in pack carburising process is in the form of (A) Charcoal (B) Calcium carbide (C) Hydrocarbon oil (D) Graphite

Last Answer : (A) Charcoal

The main constituent of carborundum is __________ carbide. (A) Calcium (B) Silicon (C) Boron (D) Aluminium

Description : The main constituent of carborundum is __________ carbide. (A) Calcium (B) Silicon (C) Boron (D) Aluminium

Last Answer : (B) Silicon

Mannheim furnace is used in the manufacture of (A) Hydrochloric acid (B) H2SO4 by Chamber process (C) Calcium carbide (D) Corundum

Description : Mannheim furnace is used in the manufacture of (A) Hydrochloric acid (B) H2SO4 by Chamber process (C) Calcium carbide (D) Corundum

Last Answer : (A) Hydrochloric acid