Linear and non-linear device

1 Answer

Answer :

Linear and non-linear device

image

Related questions

Description : Which of the following is NOT a non-linear resistor? A) Varistor B) Precision resistor C) NTC thermistor D) PTC thermistor 

Last Answer : Which of the following is NOT a non-linear resistor? A) Varistor B) Precision resistor C) NTC thermistor D) PTC thermistor 

Description : If non-linear loads are connected to the power system, then (A) displacement power factor is same as the total power factor (B) displacement power factor is not equal to the total power ... factor is due to harmonic currents (D) total power factor is due to fundamental component of current

Last Answer : If non-linear loads are connected to the power system, then displacement power factor is not equal to the total power factor

Description : Which of the following does not show non-linear V-I characteristics? (A) Schottky diode (B) Tunnel diode (C) Thermistor, at a fixed temperature (D) p-n Junction diode.

Last Answer : Which of the following does not show non-linear V-I characteristics? (A) Schottky diode (B) Tunnel diode (C) Thermistor, at a fixed temperature (D) p-n Junction diode.

Description : A non-linear network does not satisfy?

Last Answer : A non-linear network does not satisfy both homogeneity as well as superposition condition.

Description : What are ‘Linear actuators’ ? State applications.

Last Answer : What are ‘Linear actuators’ ? State applications.

Description : Which of the following converts linear displacement from a mechanical reference into a proportional electrical signal containing phase and amplitude information? A) CRO B) LVDT C) RVDT D) None of these

Last Answer : Which of the following converts linear displacement from a mechanical reference into a proportional electrical signal containing phase and amplitude information? A) CRO B) LVDT C) RVDT D) None of these

Description : what is linear regulator?

Last Answer : linear regulator video

Description : State any four materials used in fabrication of semiconductor device and describe its need.

Last Answer : For fabrication of semiconductor devices like transistors diode, solar cell etc. we have to make use of following types of materials  1. Substrate: o It is used for deposition of thin ... . o Metal cans and sealed glass containers satisfy the extreme requirements of space and military users.

Description : Why transistor is called as bipolar device.

Last Answer : BJT is called bipolar device because in BJT current conduction takes place due to majority as well as minority charge carriers that is because of electrons as well as holes.

Last Answer : Thyristor can only be turned on by small gate pulse but it cannot be turn off by using gate hence thyristor is called semi controlled device.

Last Answer : Thyristor can be turn on by positive gate pulse and the current will continue to flow through the device even when the gate voltage is low hence thyristor is called latching device.

Description : A linear network has a current input 4cos(ω t + 20º)A and a voltage output 10 cos(ωt +110º) V. Determine the associated impedance.

Last Answer : Solution

Description : Linear algebra problem: Rank of a matrix

Last Answer : Linear algebra problem: Rank of a matrix https://youtu.be/b7tPLA3_y6Y

Description : Linear algebra problem: The determinant of the matrix

Last Answer : Answer : Linear algebra problem: The determinant of the matrix

Description : Linear Algebra Problem the solution to the system of equations

Last Answer : Linear Algebra Problem the solution to the system of equations https://youtu.be/y_FlupirxZM

Description : Linear Algebra Problem 2

Last Answer : https://youtu.be/zAPDYO0q-9w Linear Algebra Problem 2

Description : Linear Algebra Problem The product of eigen values of the matrix

Last Answer : Linear Algebra Problem The product of eigen values of the matrixhttps://youtu.be/JGcynUZFQ78

Description : A system is linear if and only if it satisfies

Last Answer : A system is linear if and only if it satisfies principle of superposition and principle of homogeneity

Description : A network contains linear resistors and ideal voltage sources. If values of all the resistors are doubled then the voltage across each resistor will

Last Answer : A network contains linear resistors and ideal voltage sources. If values of all the resistors are doubled then the voltage across each resistor will not change

Description : The power flow problem mathematical model for a linear transmission network (A) is non-linear (B) is linear (C) considers time variation of generation (D) does not consider tap-changing transformers

Last Answer : The power flow problem mathematical model for a linear transmission network is non-linear

Description : What are the disadvantages of the linear regulator? how are they overcome in the switching regulator? What is continuous and discontinuous mode switching regulator?

Last Answer : Disadvantages of the linear regulator: Linear regulator waste power in the form of heat. Linear regulator has very low efficiency. Linear regulator cannot be used for the step ... between continuous mode and discontinuous mode switching regulator.

Description : write short notes on Linear motor.

Last Answer : Normal electrical motor produces rotatory motion same the linear motor produces linear motion. Linear motors have low efficiency. Linear motor can directly produce straight line motion linear motor do not required gears or crank shaft to produce linear motion.

Description : Linear Time Invariant (LTI) System

Last Answer : Linear Time Invariant System Linear system means a system which possesses the property of superposition. Time invariant system means its behavior and characteristics are fixed over time. Before ... from the impulse response. Impulse response is related to frequency response via Fourier transform.

Description : Which of the following device is used for coupling microwave energy?  A) Resonator B) Waveguide C) Loop D) Antenna

Last Answer : A

Description :  Which of the following is a negative-resistance microwave device for oscillator applications? A) IMPATT Diode B) Gunn Diode C) Snap diode D) Schottky Diode 

Last Answer :  Which of the following is a negative-resistance microwave device for oscillator applications? A) IMPATT Diode B) Gunn Diode C) Snap diode D) Schottky Diode 

Description : The device which allows reverse power flow and withstands highest switch frequency is (A) GTO (B) MOSFET (C) IGBT (D) Inverter grade SCR

Last Answer : The device which allows reverse power flow and withstands highest switch frequency is MOSFET

Description : A snubber circuit is connected to the power semiconductor device to reduce the (A) turn-on time (B) turn-off time (C) electrical stresses (D) thermal resistance

Last Answer : A snubber circuit is connected to the power semiconductor device to reduce the electrical stresses

Last Answer : Wagner earthing device is used to eliminate errors due to electrostatic coupling.

Last Answer : Basically a potentiometer is a device for comparing two voltages.

Last Answer : A damping device prevents the oscillation of the moving system and enables the latter to reach its final position quickly.

Last Answer : A switchgear is device used for switching, controlling and protecting the electrical circuit and equipment.

Description : Is FPGA a volatile device?

Last Answer : Yes, FPGA is a volatile device.

Last Answer : No, IGBT is not the current controlled device. IGBT is a voltage controlled device. IGBT have combine qualities of MOSFET and BJT. The high switching speed of MOSFET and low conduction losses of BJT. Also, IGBT which stands for Insulated Gate Bipolar Transistor have high input impedance.

Last Answer : No, BJT is a current controlled device .

Last Answer : already answered here is mosfet current controlled device?

Description : 2000 The rank of matrix is

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : Spring.

Last Answer : what is now?

Last Answer : MOSFET  are voltage controlled devices.

Last Answer : BJT is current controlled device.

Description : Magnetic and Non-magnetic Materials

Last Answer : We have now looked at a number of ways in which matter can be grouped, such as into metals, semi-metals and non-metals; electrical conductors and insulators, and thermal conductors and insulators. ... information must be stored, in computers and TV's, as well as in generators and electric motors.

Description : Metals, Metalloids and Non-metals

Last Answer : The elements in the periodic table can also be divided according to whether they are metals, metalloids or non-metals. The zigzag line separates all the elements that are metals from those that ... more metals then non-metals. Metals, metalloids and non-metals all have their own specific properties.

Description : State the insulating materials used in motor. Write temperature class and withstand temperature ranges for them. 

Last Answer : The insulating materials used in motor are as belows: 1. Cotton, 2. Silk, or paper, 3. Press board, 4. Resins 5. PVC 6. Cellulose-Fiber, 7. Enameled coating, etc  ... Over 180° Mica, porcelain, ceramics, glass quartz, asbestos, treated glass fiber or treated asbestos. etc.

Description : Explain MCB and ELCB with connection diagram supplying single phase load. 

Last Answer : OR OR Explanation: * MCB provides short circuit protection. * MCB provides overload protection * ELCB provides earth fault protection. * MCB is in series with ... occurs, the ELCB cuts off the power within the time of 0.1 sec. automatically to protect the personnel. 

Description : Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Last Answer : Parts Insulating Materials  Insulation between heating element and base plate of electric iron. Mica Insulation used over copper or aluminium conductor used for making coils.  ... Transformer bushings Porcelain  Insulation between transmission line and pole. Porcelain

Description : Explain the suitability of aluminium as an electrical conductor with respect to its mechanical and electrical properties. 

Last Answer : Following are requirements of conductor:- i) High conductivity :  Material should have high conductivity, So that * cross section of conductor (size) reduces, * Copper losses reduces, * So Efficiency ... . Boiling point is 1820°C 9. Specific gravity is 2.7 10. High resistance to corrosion. 

Description : State the type of insulating materials under Class Y and Class B.

Last Answer : The type of insulating materials under Class Y : 1. Cotton  2. Silk 3. Paper 4. Rubber 5. PVC The type of insulating materials under Class B: 1. Backelite 2. Impregnated varnish 3. Mica 4. Fiber glass 5. Asbestos 

Description : State gaseous and liquid insulating material.

Last Answer : i) Gaseous insulating material : 1. Air 2. Nitrogen 3. Hydrogen 4. SF6 ii) liquid insulating material: 1. Transformer oil 2. Capacitor oil 3. Cable oil 4. Pyranol 5. Savotal 6. Savol 7. Vegetable oil 8. Silicon liquids

Description : Describe the difference between an open circuit and a short circuit.

Last Answer : Open circuit means the wire is cut meaning power will not flow and close circuit means wire is not cut and hence power will flow.Short circuit is the same as close circuit

Description : Name two good conductors, two good insulators, and two semiconductors.

Last Answer : In general all metals are good conductors, with silver the best and copper second.