Which of the following are optimum temperature conditions for making benzenediazonium chloride from aniline? (a) 0°C to 10°C (b) 20°C to 25°C (c) 30°C to 40°C (d) 45°C to 50°C

Which of the following are optimum temperature conditions for making
benzenediazonium chloride from aniline?
(a) 0°C to 10°C
(b) 20°C to 25°C
(c) 30°C to 40°C
(d) 45°C to 50°C
by

1 Answer

Answer :

0°C to 10°C
by

Related questions

Lumirhodopsin is stable only at temperature below (A) –10°C (B) –20°C (C) –40°C (D) –50°C

Description : Lumirhodopsin is stable only at temperature below (A) –10°C (B) –20°C (C) –40°C (D) –50°C

Last Answer : Answer : D

Thermophilic micro-organism grow well at temperature– 1) 10°C – 20°C 2) 20°C – 40°C 3) 50°C – 60°C 4) 5°C – 7°C

Description : Thermophilic micro-organism grow well at temperature– 1) 10°C – 20°C 2) 20°C – 40°C 3) 50°C – 60°C 4) 5°C – 7°C

Last Answer : 3) 50°C – 60°C

Fats are solids at (A) 10°C (B) 20°C (C) 30°C (D) 40°C

Description : Fats are solids at (A) 10°C (B) 20°C (C) 30°C (D) 40°C

Last Answer : Answer : B

The optimum cardinal temparature point for germination of rice seeds is– 1) 20°C – 25°C 2) 18°C – 22°C 3) 30°C – 32°C 4) 37°C – 39°C

Description : The optimum cardinal temparature point for germination of rice seeds is– 1) 20°C – 25°C 2) 18°C – 22°C 3) 30°C – 32°C 4) 37°C – 39°C

Last Answer : 1) 20°C – 25°C

Lumirhodopsin is stable only at a temperature below (A) –35°C (B) –40°C (C) –45°C (D) –50°C

Description : Lumirhodopsin is stable only at a temperature below (A) –35°C (B) –40°C (C) –45°C (D) –50°C

Last Answer : Answer : D

Process conditions in fermentator used for production of penicillin is (A) 25°C, 2 atm (B) 50°C, l0 atm (C) 30°C, 200 mm Hg (absolute) (D) 90°C, 45 atm

Description : Process conditions in fermentator used for production of penicillin is (A) 25°C, 2 atm (B) 50°C, l0 atm (C) 30°C, 200 mm Hg (absolute) (D) 90°C, 45 atm

Last Answer : (A) 25°C, 2 atm

The wet and 'dry bulb temperature for a vapour-gas mixture are 25°C and 30°C respectively. If the mixture is heated to 45°C at constant pressure, the wet bulb temperature will be __________ °C. (A) 25 (B) > 25 (C) < 25 (D) - 25

Description : The wet and 'dry bulb temperature for a vapour-gas mixture are 25°C and 30°C respectively. If the mixture is heated to 45°C at constant pressure, the wet bulb temperature will be __________ °C. (A) 25 (B) > 25 (C) < 25 (D) - 25

Last Answer : (B) > 25

The life expectancy of electrical insulation, is approximately halved for an increased operating temperature of _______________. A. 10°C B. 25°C C. 50°C D. 100°C

Description : The life expectancy of electrical insulation, is approximately halved for an increased operating temperature of _______________. A. 10°C B. 25°C C. 50°C D. 100°C

Last Answer : Answer: A

The Manufacturer of aeration devices reports the oxygen transfer rate of the device obtained through laboratory tests carried under standard conditions. Such standard condition are : (a) Wastewater at zero DO, 25°C and 760 mm Hg (b) Tapwater at zero DO, 0°C and 700 mm Hg (c) Tapwater at zero DO, 20°C and 760 mm Hg (d) Wastewater at zero DO, 0°C and 700 mm Hg

Description : The Manufacturer of aeration devices reports the oxygen transfer rate of the device obtained through laboratory tests carried under standard conditions. Such standard condition are : (a) Wastewater at zero DO, 25°C and 760 mm ... DO, 20°C and 760 mm Hg (d) Wastewater at zero DO, 0°C and 700 mm Hg

Last Answer : (c) Tapwater at zero DO, 20°C and 760 mm Hg

The average temperature of sewage in India, is A. 10°C B. 15°C C. 20°C D. 25°C

Description : The average temperature of sewage in India, is A. 10°C B. 15°C C. 20°C D. 25°C

Last Answer : ANS: C

The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2 . The temperature of the inside wall is - 5°C. The outside wall temperature is (A) 25°C (B) 30°C (C) 35°C (D) 40°C

Description : The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2 . The temperature of the inside wall is - 5°C. The outside wall temperature is (A) 25°C (B) 30°C (C) 35°C (D) 40°C

Last Answer : (C) 35°C

If a certain amount of dry ice is mixed with same amount of water at 80°C, the final temperature of mixture will be  (a) 80°C  (b) 0°C  (c) 40°C  (d) 20°C  (e) 60°C.

Description : If a certain amount of dry ice is mixed with same amount of water at 80°C, the final temperature of mixture will be  (a) 80°C  (b) 0°C  (c) 40°C  (d) 20°C  (e) 60°C.

Last Answer : Answer : b

Volatile oil are those oil which can evaporate at : a. 25°C b. 40°C c. 50°C d. 65°C

Description : Volatile oil are those oil which can evaporate at : a. 25°C b. 40°C c. 50°C d. 65°C

Last Answer : 25°C

Date growth does not cease if temperature does not fall below: a. 0°C. b. 10°C c. 18°C d. 20°C

Description : Date growth does not cease if temperature does not fall below: a. 0°C. b. 10°C c. 18°C d. 20°C

Last Answer : 18°C

5 days-biochemical oxygen demand (BOD5) is taken at a temperature of A. 0°C B. 15°C C. 20°C D. 25°C

Description : 5 days-biochemical oxygen demand (BOD5) is taken at a temperature of A. 0°C B. 15°C C. 20°C D. 25°C

Last Answer : ANS: C

A mixture of 10% C6H6 vapour in air at 25°C and 750 mm Hg has a dew point of 20°C. Its dew point at 30°C and 700 mm Hg will be around __________ °C. (A) 21.7 (B) 20 (C) 27.3 (D) 18.7

Description : A mixture of 10% C6H6 vapour in air at 25°C and 750 mm Hg has a dew point of 20°C. Its dew point at 30°C and 700 mm Hg will be around __________ °C. (A) 21.7 (B) 20 (C) 27.3 (D) 18.7

Last Answer : (D) 18.7

Optimum temperature for cool season vegetables is: a. 25-30°C b. 25-27°C c. 18-24°C d. 15-20°C

Description : Optimum temperature for cool season vegetables is: a. 25-30°C b. 25-27°C c. 18-24°C d. 15-20°C

Last Answer : 18-24°C

Optimum temperature for potato tuber formation is a. 20-22°C b. 25-30°C c. 22-25°C d. All of these

Description : Optimum temperature for potato tuber formation is a. 20-22°C b. 25-30°C c. 22-25°C d. All of these

Last Answer : 20-22°C

Optimum temperature for maximum crop development in wheat is (a) 10-15°C(b) 20-25°C (c) 25-30°C (d) 30-35°C

Description : Optimum temperature for maximum crop development in wheat is (a) 10-15°C(b) 20-25°C (c) 25-30°C (d) 30-35°C

Last Answer : (b) 20-25°C

The bacteria which are able to grow at 0°C but which grow at 20°C to 30°C, are known as a. Psychrophiles b. Facultative psychrophiles c. Average psychrophiles d. Mesophiles

Description : The bacteria which are able to grow at 0°C but which grow at 20°C to 30°C, are known as a. Psychrophiles b. Facultative psychrophiles c. Average psychrophiles d. Mesophiles

Last Answer : Ans: C

Benzenediazonium chloride reacts with hypophosphorus acid to form : (a) Phenol (b) Benzaldehyde (c) Aniline (d) Benzene

Description : Benzenediazonium chloride reacts with hypophosphorus acid to form : (a) Phenol (b) Benzaldehyde (c) Aniline (d) Benzene

Last Answer : Benzene

Benzenediazonium chloride reacts with warm water to give (a) Aniline (b) Phenol (c) Benzene (d) Chlorobenzene

Description : Benzenediazonium chloride reacts with warm water to give (a) Aniline (b) Phenol (c) Benzene (d) Chlorobenzene

Last Answer : Phenol

Which of the following statements is correct about aniline? (a) is weak acid. (b) diazotizes to benzenediazonium chloride when treated with ice-cold nitrous acid. (c) can be nitrated with concentrated HNO3 to form p-nitroaniline. (d) gives an intense green color with a suspension of bleaching powder in water

Description : Which of the following statements is correct about aniline? (a) is weak acid. (b) diazotizes to benzenediazonium chloride when treated with ice-cold nitrous acid. (c) can be nitrated with ... p-nitroaniline. (d) gives an intense green color with a suspension of bleaching powder in water

Last Answer : diazotizes to benzenediazonium chloride when treated with ice-cold nitrous acid.

Unless it can be shown that a 45°C ambient temperature will not be exceeded, motors within a machinery space must be designed for an ambient temperature of _____________. A. 45°C B. 50°C C. 55°C D. 60°C

Description : Unless it can be shown that a 45°C ambient temperature will not be exceeded, motors within a machinery space must be designed for an ambient temperature of _____________. A. 45°C B. 50°C C. 55°C D. 60°C

Last Answer : Answer: B

Unsaturated air (with dry bulb and wet bulb temperatures being 45°C and 25°C respectively) is passed through a water spray chamber maintained at 23°C. The air will be cooled and (A) Humidified with wet bulb temperature decreasingB) Humidified at constant wet bulb temperature(C) Dehumidified(D) None of these

Description : Unsaturated air (with dry bulb and wet bulb temperatures being 45°C and 25°C respectively) is passed through a water spray chamber maintained at 23°C. The air will be cooled and (A) ... temperature decreasing B) Humidified at constant wet bulb temperature (C) Dehumidified (D) None of these

Last Answer : (A) Humidified with wet bulb temperature decreasing

If a D.C. motor designed for 40°C ambient temperature is to be used for 50°C ambient temperature, then the motor?

Last Answer : If a D.C. motor designed for 40°C ambient temperature is to be used for 50°C ambient temperature, then the motor is to be derated by a factor recommended by manufacturer and select the next higher H.P. motor.

Which of the following environmental conditions are essential for optimum growth of Mucor on a piece of bread ? A. Temperature of about 25°C B. Temperature of about 5°C C. Relative humidity of about 5% D. Relative humidity of about 95% E. A shady place F. A brightly illuminated place Choose the answer from the following options. (a) B, C and F only (b) A, C and E only (c) A, D and E only (d) B, D and E only

Description : Which of the following environmental conditions are essential for optimum growth of Mucor on a piece of bread ? A. Temperature of about 25°C B. Temperature of about 5°C C. Relative humidity of about 5% D. Relative humidity of about 95% ... b) A, C and E only (c) A, D and E only (d) B, D and E only

Last Answer : (c) A, D and E only

Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of 2 kJ/kg.K enters at 20°C. The log mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Description : Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of ... mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Last Answer : (A) 32

A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The temperature at a distance 100 mm from the dipped end becomes 40°C at time, t = 200 s. The same temperature is achieved at a distance of 200 mm from the dipped end at time (A) t = 283 s (B) t = 356 s (C) t = 400 s (D) t = 800 s

Description : A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The ... = 283 s (B) t = 356 s (C) t = 400 s (D) t = 800 s

Last Answer : (D) t = 800 s

A Fahrenheit thermometer indicates a temperature of ‘ 14°F. its corresponding reading on the Celsius scale will be -----? A. – 2O°C B. – 10°C (Answer) C. + 10°C D. + 20°C

Description : A Fahrenheit thermometer indicates a temperature of ‘ 14°F. its corresponding reading on the Celsius scale will be -----? A. – 2O°C B. – 10°C (Answer) C. + 10°C D. + 20°C

Last Answer : B. – 10°C (Answer)

A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal to 50J/mole.K. The temperature rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Description : A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal ... rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Last Answer : (B) 10°C

Air initially at 101. 3 kPa and 40°C and with a relative humidity of 50%, is cooled at constant pressure to 30°C. The cooled air has a (A) Higher dew point (B) Higher absolute (specific) humidity (C) Higher relative humidity (D) Higher wet bulb temperature

Description : Air initially at 101. 3 kPa and 40°C and with a relative humidity of 50%, is cooled at constant pressure to 30°C. The cooled air has a (A) Higher dew point (B) Higher absolute (specific) humidity (C) Higher relative humidity (D) Higher wet bulb temperature

Last Answer : (C) Higher relative humidity

Potato tuber growth is stopped at what temperature ? (a) 40°C — 42°C (b) 30°C — 32°C (c) 35°C — 37°C (d) 38°C – 40°C

Description : Potato tuber growth is stopped at what temperature ? (a) 40°C — 42°C (b) 30°C — 32°C (c) 35°C — 37°C (d) 38°C – 40°C

Last Answer : (b) 30°C — 32°C

A refrigerator is working on reversed carnot cycle between temperature of 30°C to –10°C with capacity of 10 tonnes. Calculate. (i) The COP (ii) Define ton of refrigeration (iii) Give the industrial application of refrigeration

Description : A refrigerator is working on reversed carnot cycle between temperature of 30°C to –10°C with capacity of 10 tonnes. Calculate. (i) The COP (ii) Define ton of refrigeration (iii) Give the industrial application of refrigeration

Last Answer : (ii) Ton of refrigeration: It is defined as the quantity of heat required to be removed from 1Ton water at 0oC to get ice at 0oC in one day. (iii) Industrial applications of refrigeration ... food stuff such as meat, fruit, fruit juice, vegetables etc. 5. Ice cooling of concrete for dam.

High seed germination in cucumber occurs under temperature range of: a. 20-25°C b. 25-30°C c. 15-25°C d. None of above

Description : High seed germination in cucumber occurs under temperature range of: a. 20-25°C b. 25-30°C c. 15-25°C d. None of above

Last Answer : 20-25°C

A thin, flat & square plate measuring 2 m × 2 m is freely hanging in ambient air at 25°C. It is exposed to the solar radiation falling on one side of the plate at the rate of 500 W/m2. The plate temperature will remain constant at 30°C, if the convective heat transfer co-efficient is __________ W/m2 °C. (A) 50 (B) 100 (C) 150 (D) 200

Description : A thin, flat & square plate measuring 2 m 2 m is freely hanging in ambient air at 25°C. It is exposed to the solar radiation falling on one side of the plate at the rate of 500 W/m2. The plate temperature will ... heat transfer co-efficient is __________ W/m2 °C. (A) 50 (B) 100 (C) 150 (D) 200

Last Answer : (B) 100

Temperature and gage pressure maintained during the manufacture of cold SBR (styrene butadiene rubber) are (A) 5°C and 1 kgf/cm2 (B) - 20°C and 1 kgf/cm2 (C) 0°C and 1 kgf/cm2 (D) 0°C and 3 kgf/cm

Description : Temperature and gage pressure maintained during the manufacture of cold SBR (styrene butadiene rubber) are (A) 5°C and 1 kgf/cm2 (B) - 20°C and 1 kgf/cm2 (C) 0°C and 1 kgf/cm2 (D) 0°C and 3 kgf/cm

Last Answer : (A) 5°C and 1 kgf/cm

Normal temperature and pressure (N.T.P.) corresponds to (A) 0°C and 760 mm Hg (B) 15°C and 760 mm Hg (C) 20°C and 760 mm Hg (D) 0°C and 1 kgf/cm2

Description : Normal temperature and pressure (N.T.P.) corresponds to (A) 0°C and 760 mm Hg (B) 15°C and 760 mm Hg (C) 20°C and 760 mm Hg (D) 0°C and 1 kgf/cm2

Last Answer : (C) 20°C and 760 mm Hg

An insulation resistance reading is taken at 20°C and found to be 10 megohms. What would you expect the resistance reading to be at 40°C? A. 2.5 megohms B. 10 megohms C. 15 megohms D. 20 megohms

Description : An insulation resistance reading is taken at 20°C and found to be 10 megohms. What would you expect the resistance reading to be at 40°C? A. 2.5 megohms B. 10 megohms C. 15 megohms D. 20 megohms

Last Answer : Answer: A

The temperature condition for storage of drug products under cold temperature is given as : (A) temperature between 8°C and 25°C (B) temperature below 20 C (C) temperature at 0°C (D) temperature between 2c C and S: C

Description : The temperature condition for storage of drug products under cold temperature is given as : (A) temperature between 8°C and 25°C (B) temperature below 20 C (C) temperature at 0°C (D) temperature between 2c C and S: C

Last Answer : (D) temperature between 2c C and S: C

What happens when the temperature of water falls from 30°C and 0°C? (a) The volume of ice formed will be less than volume of water (b) The volume of ice formed will be more than the volume of water (c) Water will not freeze at 0°C (d) None of the above

Description : What happens when the temperature of water falls from 30°C and 0°C? (a) The volume of ice formed will be less than volume of water (b) The volume of ice formed will be more than the volume of water (c) Water will not freeze at 0°C (d) None of the above

Last Answer : Ans:(b)

A microbe that is a microaerophilic mesophile would grow optimally at and a. high 02; 30°C b. low 02; 20°C c. no 02; 30°C d. low 02; 37°C

Description : A microbe that is a microaerophilic mesophile would grow optimally at and a. high 02; 30°C b. low 02; 20°C c. no 02; 30°C d. low 02; 37°C

Last Answer : d. low 02; 37°C

Maximum density of water exists at (a) 0°C (b) 4°C (c) 40°C (d) 100°C

Description : Maximum density of water exists at (a) 0°C (b) 4°C (c) 40°C (d) 100°C

Last Answer : (b) 4°C

Which of the following reactions does not produce benzene as one of the products? (a) Treating benzenediazonium chloride with H3PO2 (b) Distilling phenol with zinc dust (c) Fusing sodium benzoate with NaOH (d) Fusing sodium benzenesulfonate with NaOH

Description : Which of the following reactions does not produce benzene as one of the products? (a) Treating benzenediazonium chloride with H3PO2 (b) Distilling phenol with zinc dust (c) Fusing sodium benzoate with NaOH (d) Fusing sodium benzenesulfonate with NaOH

Last Answer : Fusing sodium benzenesulfonate with NaOH

Benzenediazonium chloride reacts with phenol to form : (a) p-chlorophenol (b) Chlorobenzene (c) p-Hydroxyazobenzene (d) DDT

Description : Benzenediazonium chloride reacts with phenol to form : (a) p-chlorophenol (b) Chlorobenzene (c) p-Hydroxyazobenzene (d) DDT

Last Answer : p-Hydroxyazobenzene

Benzenediazonium chloride reacts with KI to form : (a) Benzenediazonium iodide (b) m-Diiodobenzene (c) Iodobenzene (d) o- plus p-Diiodobenzene

Description : Benzenediazonium chloride reacts with KI to form : (a) Benzenediazonium iodide (b) m-Diiodobenzene (c) Iodobenzene (d) o- plus p-Diiodobenzene

Last Answer : Iodobenzene

Iodobenzene can be prepared by (a) treating chlorobenzene with I2 using FeCl3 catalyst. (b) treating phenol with I2 in NaOH solution. (c) treating benzenediazonium chloride with KI (d) treating benzene with CH3I using AlCl3 catalyst

Description : Iodobenzene can be prepared by (a) treating chlorobenzene with I2 using FeCl3 catalyst. (b) treating phenol with I2 in NaOH solution. (c) treating benzenediazonium chloride with KI (d) treating benzene with CH3I using AlCl3 catalyst

Last Answer : treating benzenediazonium chloride with KI

When water is heated from 0°C to 10°C. Its volume (1) increases (2) decreases (3) does not change (4) first decreases and then increases

Description : When water is heated from 0°C to 10°C. Its volume (1) increases (2) decreases (3) does not change (4) first decreases and then increases

Last Answer : (4) first decreases and then increases

What happens, When water is heated from 0°C to 10°C the volume of water?

Description : What happens, When water is heated from 0°C to 10°C the volume of water?

Last Answer : First decreases then increases

A gas has a volume of 27.3 c.c. at 0°C. Its volume at 10°C (if pressure remains unchanged) will be __________ c.c. (A) 2.73 (B) 28.3 (C) 273 (D) 283

Description : A gas has a volume of 27.3 c.c. at 0°C. Its volume at 10°C (if pressure remains unchanged) will be __________ c.c. (A) 2.73 (B) 28.3 (C) 273 (D) 283

Last Answer : (B) 28.3