Transistor operating configurations

Transistor operating configurations
by

1 Answer

Answer :

Transistor operating configurations

image
by

Related questions

List configurations of BJT.

Description : List configurations of BJT. 

Last Answer : Configurations of BJT : 1) Common Base (CB) configuration 2) Common Emitter (CE) configuration 3) Common Collector (CC) configuration

Compare P.N.P and N.P.N transistor.

Description : Compare P.N.P and N.P.N transistor.

Last Answer : Parameter PNP transistor NPN transistor Definition Two blocks of p- types semiconductors are separated by one thin block of n-type semiconductor. Transistor in which two ntype layer ... Positive Voltage  Emitter Terminal Collector Terminal Ground Signal High Low

Define junction field effect transistor (JFET) and give an example.

Description : Define junction field effect transistor (JFET) and give an example.

Last Answer : Junction Field-Effect Transistor: It is a semiconductor device having three terminals, namely Gate, Drain and Source, in which the current flow is controlled by an electric field set up by an external voltage applied ... : i) n-channel JFET and ii) p-channel JFET Examples of JFET: BFW 10, BFW 11 

Explain working of n-p-n transistor in unbiased condition.

Description : Explain working of n-p-n transistor in unbiased condition.

Last Answer : Construction of NPN transistor: For an unbiased transistor no external power supplies are connected to it. Base is sandwiched between collector & emitter terminal. It is thin & lightly doped ... providing external power supply to transistor & this process is known as Biasing.

Define α & β and derive the relation between (α) &) (β) of transistor.

Description : Define α & β and derive the relation between (α) &) (β) of transistor.

Last Answer : α : The ratio of output collector current IC to input emitter current IE in the CB configuration is called current gain alpha (α).  β : The ratio of output collector current IC to the input base current IB in the CE configuration is ... ( 1/β) + 1  hence 1/ α = (1+β )/ β  Therefore, α = β /(1+β)

Define biasing of transistor

Description : Define biasing of transistor

Last Answer : Biasing of transistor is the process that makes the base emitter junction of transistor always forward biased and collector junction reverse biased for achieving the faithful amplification .

With neat diagram explain working of NPN transistor.

Description : With neat diagram explain working of NPN transistor.

Last Answer : N-p-n transistor is made by sandwiching thin layer of p-type semiconductor between two layers of n-type semiconductor. It has three terminals - Emitter, Base and collector. The npn transistor has two ... up in the collector as it is more positive. In this way, current flows in the transistor.

Draw and explain self-basing of a transistor.

Description : Draw and explain self-basing of a transistor.

Last Answer : Transistor Biasing is the process of setting a transistors DC operating voltage or current conditions to the correct level so that any AC input signal can be amplified correctly by the transistor. ExplanationIt ... Applying KVL to o/p loop , Collector-emitter voltage, VCE = VCC − IC RC

Compare between CB , CE & CC transistor configuration.

Description : Compare between CB , CE & CC transistor configuration.

Last Answer : Parameter CB CE CC I/P impedance Low Or 50Ω Medium Or 600Ωto 4kΩ High Or 1 MΩ Current Gain Less than or equal to 1 High Highest Voltage Gain Medium Medium Less ... k Ω to 50 k Ω Low Or 50 Ω Phase shift between input and output 0° 360° 0° 

Why transistor is called as bipolar device.

Description : Why transistor is called as bipolar device.

Last Answer : BJT is called bipolar device because in BJT current conduction takes place due to majority as well as minority charge carriers that is because of electrons as well as holes.

Draw construction of SCR using two transistor model. Explain its operation.

Description : Draw construction of SCR using two transistor model. Explain its operation.

Last Answer : Two Transistor Model of SCR or Thyristor

Draw the V-I characteristics of power transistor.

Description : Draw the V-I characteristics of power transistor. 

Last Answer : V-I characteristics of power transistor:

Describe thermal runaway of transistor and explain how it can be avoided.

Description : Describe thermal runaway of transistor and explain how it can be avoided.

Last Answer : Concept of thermal runaway:  1.We know that  IC = β IB + (1+ β) ICO  Where ICO is the leakage current and ICO is strongly dependent on temperature. 2. Leakage current approximately doubles for ...   Thermal runaway can be avoided by : 1) Using stabilization circuitry 2) Heat sink 

Define α and β of the transistor.

Description : Define α and β of the transistor. 

Last Answer : α: The ratio of collector current IC to emitter current IE for a constant collector to base voltage VCB in the CB configuration is called current gain alpha (α).   β : The ratio of collector ... a constant collector to emitter voltage VCE in the CE configuration is called current gain beta (β) .

List various transistor biasing methods.

Description : List various transistor biasing methods.

Last Answer : Types of biasing methods: i. Base bias (or fixed bias) ii. Base bias with emitter feedback. iii. Base bias with collector feedback iv. Voltage divider bias (or self bias) v. Emitter bias. 

What is the main use of a transistor?

Description : What is the main use of a transistor?

Last Answer : Main use of a transistor as amplifier and as switch.

Draw construction of Megger and write operating principle of it.

Description : Draw construction of Megger and write operating principle of it.

Last Answer : Megger:  Working: Two coils the current coil and pressure coil are mounted at an angle on the same spindle and form the part of the moving system. These coils are connected to a small hand driven ... . When the instrument is not working the pointer may rest at any position on the dial.

Explain the operating principle of LASER and list applications of LASER diode.

Description : Explain the operating principle of LASER and list applications of LASER diode.

Last Answer : A basic construction of Laser diode is as shown . A PN junction is formed by two layers of doped gallium arsenide. There is highly reflective surface at one end of PN junction and ... 6. laser scanning and light beam illumination. 7. Military applications 8. Medical surgery 9.Diamond cutting

A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are :

Description : A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are :  (A) less than 66 kV (B) lie between 66 kV and 110 kV (C) more than 165 kV (D) lie between 110 kV and 165 kV

Last Answer : A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are : lie between 66 kV and 110 kV

In a single-phase induction motor, the operating direction is determined by the ________

Description : In a single-phase induction motor, the operating direction is determined by the ________ A) Rotor B) Stator C) Starting circuit D) None of these

Last Answer : In a single-phase induction motor, the operating direction is determined by the Starting circuit

What is the power factor when a single phase watt meter operating on 200 V and 5 A for 5 hours makes 2016

Description : What is the power factor when a single phase watt meter operating on 200 V and 5 A for 5 hours makes 2016 revolutions and the meter constant in revolution is 420? A) 0.04 B) 1.04 C) 0.96 D) None of these

Last Answer : What is the power factor when a single phase watt meter operating on 200 V and 5 A for 5 hours makes 2016 revolutions and the meter constant in revolution is 420? A) 0.04 B) 1.04 C) 0.96 D) None of these

A 230 V/460 V single-phase transformer operating at 20 A and unity power factor has primary referred

Description : A 230 V/460 V single-phase transformer operating at 20 A and unity power factor has primary referred resistance of 0.2 Ω and reactance of 0.5 Ω. The approximate primary induced emf is (A) 216 V (B) 226 V (C) 234 V (D) 236 V

Last Answer : A 230 V/460 V single-phase transformer operating at 20 A and unity power factor has primary referred resistance of 0.2 Ω and reactance of 0.5 Ω. The approximate primary induced emf is 226 V

How to Uninstall an Operating System ?

Description : How to Uninstall an Operating System ?

Last Answer : How to Uninstall an Operating System Even the most stable operating systems can crash, and suffer from irreparable damage that you may need to uninstall and reinstall them. Some users, though, may like to ... , you can easily remove the old, damaged operating system, and replace it with a new one.

operating principle of PUT.

Description :  operating principle of PUT.

Last Answer : Constructional diagram & Operating principle of PUT:  The PUT is a PNPN device similar to SCR, but its operation is similar to the UJT. The PUT behave like a UJT whose trigger voltage VP can be set ... low resistance and VAK ≈ 1V). The PUT is also referred to as a complementary SCR (CSCR). 

The command line interpreter that enables the users to interact with operating system is called the

Description : The command line interpreter that enables the users to interact with operating system is called the A) Window B) Shell C) Process D) Kernel 

Last Answer : The command line interpreter that enables the users to interact with operating system is called the Shell 

The operating point of a protective current transformer is near the

Description : The operating point of a protective current transformer is near the

Last Answer : The operating point of a protective current transformer is near the Ankle point

The operating time of instantaneous relay is

Description : The operating time of instantaneous relay is

Last Answer : The operating time of instantaneous relay is 0.1 sec

The no-load speed of a single-phase SCR bridge converter fed separately excited dc motor operating at a

Description : The no-load speed of a single-phase SCR bridge converter fed separately excited dc motor operating at a firing delay angle, α and flux, Φ (A) directly proportional to α and Φ (B) ... proportional to α and inversely proportional to Φ (D) directly proportional to Φ and inversely proportional to α

Last Answer : The no-load speed of a single-phase SCR bridge converter fed separately excited dc motor operating at a firing delay angle, α and flux, Φ directly proportional to α and inversely proportional to Φ

In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load,

Description : In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load, the input source current is (A) sinusoidal current (B) constant dc current (C) continuous rectangular pulses (D) alternating rectangular pulses

Last Answer : In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load, the input source current is alternating rectangular pulses

Two synchronous generators operating in parallel supply a common load of 2.5 MW. The frequency-power

Description : Two synchronous generators operating in parallel supply a common load of 2.5 MW. The frequency-power characteristics have a common slope of 1 MW/Hz and the no-load frequencies of the generators are 51.5 Hz and 51.0 Hz, ... system frequency is (A) 50 Hz (B) 51 Hz (C) 51.25 Hz (D) 51.5 Hz

Last Answer : Two synchronous generators operating in parallel supply a common load of 2.5 MW. The frequency-power characteristics have a common slope of 1 MW/Hz and the no-load frequencies of the generators are 51.5 Hz and 51.0 Hz, respectively. Then the system frequency is 50 Hz

Operating torques in analogue instruments are?

Last Answer : Operating torques in analogue instruments are deflecting, control and damping.

The operating voltage of a meggar is about?

Last Answer : The operating voltage of a meggar is about 100 V.

To limit the operating temperature an electrical machine should have proper?

Last Answer : To limit the operating temperature an electrical machine should have proper current rating.

The operating speed of a synchronous motor can be changed to new fixed value by?

Last Answer : The operating speed of a synchronous motor can be changed to new fixed value by changing frequency.

Annual operating expenditure of a power plant consists of?

Last Answer : Annual operating expenditure of a power plant consists of fixed charges, semi-fixed charges, running charges.

The relay operating speed depends upon?

Last Answer : The relay operating speed depends upon the spring tension, the rate of flux built up, armature core air gap.

The secondary of a current transformer is always short-circuited under operating conditions because it?

Description : The secondary of a current transformer is always short-circuited under operating conditions because it?

Last Answer : The secondary of a current transformer is always short-circuited under operating conditions because it avoids core saturation and high voltage induction.

For a transformer, operating at constant load current, maximum efficiency will occur at?

Description : For a transformer, operating at constant load current, maximum efficiency will occur at?

Last Answer : For a transformer, operating at constant load current, maximum efficiency will occur at unity power factor.

Operating frequency of power MOSFET is higher than that of power BJT. Justify the statement.

Description : Operating frequency of power MOSFET is higher than that of power BJT. Justify the statement.

Last Answer : Power MOSFET have high turning on and turning off capability high switching speed of MOSFET is due to the high rate of change of drain voltage. The switching losses of power MOSFET ... lower frequency. Hence, operating frequency of power MOSFET is higher than that of power BJT.

what are the three operating regions of BJT?

Last Answer : Active , Saturation , Cut-off region of operations in BJT.

State any two commands for managing disk space and also state their use

Description : State any two commands for managing disk space and also state their use

Last Answer : There are primarily two commands that can be used for managing Disk space: 1. df 2. du 1. df - disk filesystem df command (short for disk filesystem) is used to show disk utilization ... the disk space used by files on a machine and crucial for disk space management on unix and linux systems.

What are the three transistor configurations?

Description : What are the three transistor configurations?

Last Answer : Common emitter (CE), common base (CB), and common collector (CC)

What two transistor amplifier configurations are combined in the single-transistor, two-input, single-output difference amplifier?

Description : What two transistor amplifier configurations are combined in the single-transistor, two-input, single-output difference amplifier?

Last Answer : Common emitter (CE) and common base (CB)

What are the three basic configurations of transistor oscillators?

Description : What are the three basic configurations of transistor oscillators?

Last Answer : Common collector (CC), common emitter (CE), and common base (CB).

List the different transistor configurations.

Description : List the different transistor configurations.

Last Answer : The three different transistor configurations are, 1. Common emitter configuration(CE) 2. Common base configuration(CB) 3. Common collector configuration(CC)

Draw symbol of NPN transistor and state three configurations of transistor (BJT)

Description : Draw symbol of NPN transistor and state three configurations of transistor (BJT)

Last Answer : Configuration - Common Emitter Common Collector Common Base

The configurations of the carbon atoms `C_(2)` and `C_(3)` in the following compound respectively

Description : The configurations of the carbon atoms `C_(2)` and `C_(3)` in the following compound respectively

Last Answer : The configurations of the carbon atoms `C_(2)` and `C_(3)` in the following compound respectively A. R, R B. S, S C. R, S D. S, R

The configurations of the carbon atoms `C_(2)` and `C_(3)` in the following compound respectively

Description : The configurations of the carbon atoms `C_(2)` and `C_(3)` in the following compound respectively

Last Answer : The configurations of the carbon atoms `C_(2)` and `C_(3)` in the following compound respectively A. R, R B. S, S C. R, S D. S, R

The complex ion . `[M(en)Br_(2)I_(2)]^(-1)`, has two optical isomers. Their correct configurations are:

Description : The complex ion . `[M(en)Br_(2)I_(2)]^(-1)`, has two optical isomers. Their correct configurations are:

Last Answer : The complex ion . `[M(en)Br_(2)I_(2)]^(-1)`, has two optical isomers. Their correct configurations are: A. B. C. D.

What Are The Structures Of Sheet-fed Press Or What Are The Configurations Of Sheet-fed Offset Press?

Description : What Are The Structures Of Sheet-fed Press Or What Are The Configurations Of Sheet-fed Offset Press?

Last Answer : Sheet-fed offset printing is a method in which individual pages of paper are fed into the machine. This printing method is popular for small and medium-sized fixed jobs such as limited-edition books.