In a metal conductor, what is a free electron?

In a metal conductor, what is a free electron?
by

1 Answer

Answer :

 When many atoms are close together in a copper wire, the outermost orbital electron of each copper atom can easily break free from its home or parent atom. These electrons then can migrate easily from one atom to another at random. Such electrons that can move freely from one atom to the next are called free electrons.
by

Related questions

What is the smallest unit of a compound with the same chemical characteristics?

Description : What is the smallest unit of a compound with the same chemical characteristics?

Last Answer : The molecule is the smallest unit of a compound with the same chemical characteristics.

Is the power line voltage available in our homes a dc or an ac voltage?

Description : Is the power line voltage available in our homes a dc or an ac voltage?

Last Answer : The power line voltage available in our homes is AC. Mobile dwellings are the most commonly DC-supplied homes and even then they tend to include AC supply for heavier loads.

What is PLL? Explain its operation with a block diagram.

Description : What is PLL? Explain its operation with a block diagram.

Last Answer : PLL - A phase-locked loop or phase lock loop is a control system that generates an output signal whose phase is related to the phase of an input signal Block diagram  ... to the input frequency. The phase - locked loop goes through three states free running capture and phase lock.

lf the wire which is vertical to this page has electron flow downwards the conductor will have

Description : lf the wire which is vertical to this page has electron flow downwards the conductor will have

Last Answer : lf the wire which is vertical to this page has electron flow downwards the conductor will have a counter-clockwise field in the plane of the paper

Which is the best conductor: silver, carbon, or iron?

Description : Which is the best conductor: silver, carbon, or iron?

Last Answer : Silver is the best conductor. Carbon is the semiconductor. Iron have less conductance as compared to silver.

How does the resistance of a conductor compare to that of an insulator?

Description : How does the resistance of a conductor compare to that of an insulator?

Last Answer : The resistance of a conductor can be significantly lower than the resistance of an insulator, depending on each material's atomic properties.

What is back emf?

Description : What is back emf? 

Last Answer : Back EMF: When a current carrying conductor is placed in a magnetic field it experiences a force; when it moves due to the force it (conductor) cuts the magnetic field due to which an emf is ... (hence the applied armature voltage) is opposed by the induced emf which is therefore called as Back emf.

What is electrode?

Last Answer : Electrode is a conductor use to make contact with non-metallic part of circuit. anode and cathode are electrodes.

What is another name for an insulator?

Description : What is another name for an insulator?

Last Answer : Dielectric material is another name for an insulator.

What is the function of an electrical filter ?

Description : What is the function of an electrical filter ?

Last Answer : Filter separates different components that are mixed together. Electrical filter can separate different frequency components. Electrical filters are the electrical circuits which are use to remove unwanted frequency components from the signal.

Which is a semiconductor: copper, silicon, or neon?

Description : Which is a semiconductor: copper, silicon, or neon?

Last Answer : Copper is a metal. Silicon is a semiconductor. Neon is inert gas.

A charge of 0.1 C moves past a given point every 0.01 s. How much is the current?

Description : A charge of 0.1 C moves past a given point every 0.01 s. How much is the current?

Last Answer : The current is 10.0A.  1ampere = 1 Coulomb per 1 second.  0.1Coulombs ÷ 0.01seconds = 10.0amperes.

What is Newton?

Description : What is Newton?

Last Answer : One Newton is that amount of force which acting on one-kilogram mass for one second gives an acceleration 1 meter/sec/sec. 

What is earthing? Give the importance of earthing.

Description : What is earthing? Give the importance of earthing.

Last Answer : Meaning of earthing: Connecting the metallic frame of the electrical machines /any electrical equipment body etc. to ground by using wire/conductor is known as earthing.  Importance of Earthing:  ... currents. 5. To provide stable platform for operation of sensitive electronic equipment's. 

Source transformation Replace the circuit with voltage source in series with a single resistor

Description : Source transformation Replace the circuit with voltage source in series with a single resistor

Last Answer : Source transformation Replace the circuit with voltage source in series with a single resistor

How do you find power in a circuit?

Description : How do you find power in a circuit?

Last Answer : Power can be find in a circuit by the means of meters .if an individual want to check for a power in a circuit he/she Calabria the meters on a high voltage range and put the meters Lee in parallel with the circuit he /she will know the amount of power within that circuit .

State the different modes of electron emission in metal. Explain any two modes of emission.

Description : State the different modes of electron emission in metal. Explain any two modes of emission.

Last Answer : Different modes of electron emission in metal - 1. Thermionic emission 2. Photo electric emission. 3. Field emission. 4. Secondary emission. Mode of Emission  1. Thermionic emission. ... (GaP)  Application: Electron multiplier tubes, Special amplifying tubes, Computer memory tubes. 

Explain with sketch electron beam welding.

Description : Explain with sketch electron beam welding. 

Last Answer : Electron Beam Welding Process In EBW process, the heat is generated when the electron beam impinges on work piece. As the high velocity electron beam strikes the surfaces to be welded, their kinetic ... material that is directly in the path is melted which when solidifies form the joint. 

The vertical deflection of an electron beam on the screen of a CRO is measured to be 8 mm. Now, the

Description : The vertical deflection of an electron beam on the screen of a CRO is measured to be 8 mm. Now, the potential difference between the Y-plates is doubled, and simultaneously the pre-accelerating anode voltage is reduced to half of ... on the screen would become (A) 64 mm (B) 32 mm (C) 8 mm (D) 1 mm

Last Answer : The vertical deflection of an electron beam on the screen of a CRO is measured to be 8 mm. Now, the potential difference between the Y-plates is doubled, and simultaneously the pre-accelerating ... of its previous value. Then, the vertical deflection of the beam on the screen would become 32 mm

The ratio of mass of proton to that of electron is nearly?

Description : The ratio of mass of proton to that of electron is nearly?

Last Answer : The ratio of mass of proton to that of electron is nearly 1840.

What is the charge and mass of an electron?

Description : What is the charge and mass of an electron?

Last Answer : Charge on electrons is 1.6022*10-19CAnd the mass of electrons is 9.109*10-31 kg

Explain the suitability of aluminium as an electrical conductor with respect to its mechanical and electrical properties.

Description : Explain the suitability of aluminium as an electrical conductor with respect to its mechanical and electrical properties. 

Last Answer : Following are requirements of conductor:- i) High conductivity :  Material should have high conductivity, So that * cross section of conductor (size) reduces, * Copper losses reduces, * So Efficiency ... . Boiling point is 1820°C 9. Specific gravity is 2.7 10. High resistance to corrosion. 

State properties of conductor material used for overhead conductor.

Description : State properties of conductor material used for overhead conductor. 

Last Answer : Following are the properties of conductor material:-   1. High conductivity :- Material should have high conductivity 2. High mechanical strength:- Material should have sufficiently high mechanical strength ... available & less costly. 9. Scrap Value: - Material should have high scrap value. 

Definition of conductor

Last Answer : Which allows the flow electrons 

reasons the transposition of conductor

Description : reasons the transposition of conductor

Last Answer : Following reasons the transposition of conductor:  1. Due transposition of conductor inductance of each line is same LA = LB = LC, So drop due to inductive reactance in each line is same so ... interferences are less due to transposition.  Figure of transposition of conductor: 

What is difference between Conductor and insulator ?

Description : What is difference between Conductor and insulator ?

Last Answer : Conductor is a material that offers no resistance to the flow of current, while an insulator is a material that offers total resistance to the flows of current, It doesn't allowed any flows of current.

what is conductor ?

Description : what is conductor ?

Last Answer : Conductor is the object that helps to pass the current

A 3 layer, total diameter of an ACSR conductor is 5 cm. Find the diameter of each strand?

Description : A 3 layer, total diameter of an ACSR conductor is 5 cm. Find the diameter of each strand?

Last Answer : A 3 layer, total diameter of an ACSR conductor is 5 cm. Find the diameter of each strand? 1 cm

When electric current passes through a metallic conductor, its temperature rises. This is due to?

Description : When electric current passes through a metallic conductor, its temperature rises. This is due to?

Last Answer : When electric current passes through a metallic conductor, its temperature rises. This is due to collisions between conduction electrons and atoms.

The thickness of insulation provided on the conductor depends on?

Description : The thickness of insulation provided on the conductor depends on?

Last Answer : The thickness of insulation provided on the conductor depends on the magnitude of voltage on the conductor.

The insulation on a current carrying conductor is provided?

Description : The insulation on a current carrying conductor is provided?

Last Answer : The insulation on a current carrying conductor is provided to prevent leakage of current, to prevent shock.

Heat in a conductor is produced on the passage of electric current due to?

Description : Heat in a conductor is produced on the passage of electric current due to?

Last Answer : Heat  in  a   conductor  is  produced   due  to  frictional  collision  of  electrons   flow  as  they  conduct  current.

If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes?

Description : If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes?

Last Answer : If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes 0.4 ohm.

The resistance of a few meters of wire conductor in closed electrical circuit is?

Description : The resistance of a few meters of wire conductor in closed electrical circuit is?

Last Answer : The resistance of a few meters of wire conductor in closed electrical circuit is practically zero.

The resistance of a conductor varies inversely as?

Description : The resistance of a conductor varies inversely as?

Last Answer : The resistance of a conductor varies inversely as area of cross-section.

If B is the flux density, I the length of conductor and v the velocity of conductor, then induced e.m.f. is given by?

Last Answer : If B is the flux density, I the length of conductor and v the velocity of conductor, then induced e.m.f. is given by Blv.

When a conductor carries more current on the surface as compared to core, it is due to?

Last Answer : When a conductor carries more current on the surface as compared to core, it is due to skin effect.

Is Aluminium a good conductor of electricity?

Description : Is Aluminium a good conductor of electricity?

Last Answer : Yes aluminium is a conductor and it is a good conductor of electricity. But copper have better conductivity as compare to aluminium.

Why ACSR conductor is used for overhead lines?

Description : Why ACSR conductor is used for overhead lines?

Last Answer : It has high tensile strength 

What is amorphous metal material? Give any three properties of amorphous metal.

Description : What is amorphous metal material? Give any three properties of amorphous metal.

Last Answer : Amorphous metal: The amorphous is metal alloy which differ in crystalline structure. The atoms are arranged in random configuration.  Properties of amorphous metal: 1) Thermal conductivity of ... . 6) The alloy does not undergo shrinkage on solidification, which helps in bones attachments.

What is Amorphous metal? Give one application of this metal.

Description : What is Amorphous metal? Give one application of this metal.

Last Answer : Amorphous Metals: Amorphous Metals means materials that do not possess a particular structure. Metal alloys typically possess crystalline atomic structure. The atoms are arranged in particular ... cores of special transformers d) Manufacturing magnetic sensors e) Magneto-motive sensors 

What is the potential barrier of metal?

Description : What is the potential barrier of metal?

Last Answer : Potential barrier of metal is zero.

State two applications of : (i) PVC paper (ii) Porcelain with type of class based on withstand temperature is insulating material.

Description : State two applications of : (i) PVC paper (ii) Porcelain with type of class based on withstand temperature is insulating material. 

Last Answer :  (i) Application of PVC paper : 1. It is used in slot lining or motor winding insulation purpose 2. For Insulation of Transformer winding (ii) Application of Porcelain : 1. Mainly used for manufacturing ... on withstand temperature : * H' & C' Class of insulation i e. 180° and above 180°C 

What are the uses of Thermistors ?

Description : What are the uses of Thermistors ?

Last Answer : Thermistors are frequently used in electronic circuits in which it is desired to provide temperature measurement, temperature control, and temperature compensation.

How does buffing metal make it shiny and reflective?

Description : How does buffing metal make it shiny and reflective?

Last Answer : Buffing, usually done once the polishing has been completed. Polishing refers to using an abrasive that is adhered to a wheel, paper or cloth. Polishing normally starts with a coarse grit and works up to ... the previous abrasive. Right up to the grits in the 1000's that finish the buffing process.

Why does metal make a sound when hammered and non-metals not?

Description : Why does metal make a sound when hammered and non-metals not?

Last Answer : Everything makes a sound when hit. Rigid things tend to make more sound because the vibration propagates over the whole shape quickly because the rigid thing is held tightly, so instead of just giving ... -lasting sound at one frequency. Metal is a rigid thing because of its structure. See above.

What value does mixed metal have when melted in a foundry?

Description : What value does mixed metal have when melted in a foundry?

Last Answer : Which are you talking recycled in bound or junk on the top of the crucible or bucket in the foundry.

Name that Metal song?

Description : Name that Metal song?

Last Answer : Might it be one of these? Good luck!

Is the band We Are The Fallen gothic metal?

Description : Is the band We Are The Fallen gothic metal?

Last Answer : Yep

How can I attach metal to cloth?

Description : How can I attach metal to cloth?

Last Answer : Hot glue gun, maybe?