Which is a semiconductor: copper, silicon, or neon?

Which is a semiconductor: copper, silicon, or neon?
by

1 Answer

Answer :

Copper is a metal. Silicon is a semiconductor. Neon is inert gas.
by

Related questions

Which is the best conductor: silver, carbon, or iron?

Description : Which is the best conductor: silver, carbon, or iron?

Last Answer : Silver is the best conductor. Carbon is the semiconductor. Iron have less conductance as compared to silver.

Is the power line voltage available in our homes a dc or an ac voltage?

Description : Is the power line voltage available in our homes a dc or an ac voltage?

Last Answer : The power line voltage available in our homes is AC. Mobile dwellings are the most commonly DC-supplied homes and even then they tend to include AC supply for heavier loads.

Which have more free electrons: conductors or insulators?

Description : Which have more free electrons: conductors or insulators? 

Last Answer : Conductors have many free electrons whereas insulators have very few or none at all.

A charge of 0.1 C moves past a given point every 0.01 s. How much is the current?

Description : A charge of 0.1 C moves past a given point every 0.01 s. How much is the current?

Last Answer : The current is 10.0A.  1ampere = 1 Coulomb per 1 second.  0.1Coulombs ÷ 0.01seconds = 10.0amperes.

What is the smallest unit of a compound with the same chemical characteristics?

Description : What is the smallest unit of a compound with the same chemical characteristics?

Last Answer : The molecule is the smallest unit of a compound with the same chemical characteristics.

In a metal conductor, what is a free electron?

Description : In a metal conductor, what is a free electron?

Last Answer :  When many atoms are close together in a copper wire, the outermost orbital electron of each copper atom can easily break free from its home or parent atom. These electrons then can migrate easily ... random. Such electrons that can move freely from one atom to the next are called free electrons.

What is PLL? Explain its operation with a block diagram.

Description : What is PLL? Explain its operation with a block diagram.

Last Answer : PLL - A phase-locked loop or phase lock loop is a control system that generates an output signal whose phase is related to the phase of an input signal Block diagram  ... to the input frequency. The phase - locked loop goes through three states free running capture and phase lock.

Which of the following elements are used as dopants in silicon or germanium semiconductors?

Description : Which of the following elements are used as dopants in silicon or germanium semiconductors? A) Antimony B) Phosphorus C) Arsenic D) All the above

Last Answer : Which of the following elements are used as dopants in silicon or germanium semiconductors? A) Antimony B) Phosphorus C) Arsenic D) All the above

Silicon steel is used in electrical machines because it has?

Description : Silicon steel is used in electrical machines because it has?

Last Answer : Silicon steel is used in electrical machines because it has low hysteresis loss.

Neon Glow Sticks

Description : Neon Glow Sticks

Last Answer : Glow sticks are not only useful in different party situations, the neon light they emit also open doors to artistry and creative expressions. Although a glow stick cannot be recharged, the glow lasts for a ... , so why ingest it? The newer glow sticks being produced today are said to be non-toxic.

Explain the working of Neon sign tube with diagram.

Description : Explain the working of Neon sign tube with diagram.

Last Answer : Neon sign tube: The construction & circuit diagram for neon tube is as shown in fig. Basically neon tube is used for advertisement or decoration purpose. The maximum length of tube is ... the HT transformer must be earthed separately. * Caution notice of danger board is required.

A thin P-type silicon sample is uniformly illuminated with light which generates excess carriers.

Description : A thin P-type silicon sample is uniformly illuminated with light which generates excess carriers. The recombination rate is directly proportional to (A) the minority carrier mobility (B ... lifetime (C) the majority carrier concentration (D) the excess minority carrier concentration

Last Answer : A thin P-type silicon sample is uniformly illuminated with light which generates excess carriers. The recombination rate is directly proportional to the excess minority carrier concentration

(i) Explain the process of diffusion in semiconductor material. (ii) Explain Hall effect.

Description : (i) Explain the process of diffusion in semiconductor material. (ii) Explain Hall effect.

Last Answer : (i) Diffusion: In a semi conductor bar a concentration gradient exist when either number of electrons or holes is greater in one region of a semi conductor as compared to other region. When ... to determine whether a semiconductor is N type or P type, and to find carrier concentration

fabrication of semiconductor device and describe its need.

Description : State any four materials used in fabrication of semiconductor device and describe its need.

Last Answer : For fabrication of semiconductor devices like transistors diode, solar cell etc. we have to make use of following types of materials  1. Substrate: o It is used for deposition of thin ... . o Metal cans and sealed glass containers satisfy the extreme requirements of space and military users.

State the impurities for obtaining p-type and n-type semiconductor from intrinsic semi conductor.

Description : State the impurities for obtaining p-type and n-type semiconductor from intrinsic semi conductor. 

Last Answer : Crystals of Silicon and Germanium are doped using two types of dopants:  1. The impurities for obtaining n-type semiconductor from intrinsic semiconductor are pentavalent impurity; like Arsenic (As), Antimony ... semiconductor are trivalent impurity; like Indium (In), Boron (B), Aluminum (Al), etc.

Compare intrinsic and extrinsic semiconductor

Description : Compare intrinsic and extrinsic semiconductor

Last Answer : Intrinsic semiconductor Extrinsic Semiconductor Pure form of semiconductor Impure form of semiconductor No. electrons and holes are equal  No. of electrons and holes are not equal Electrical ... e.g. Ge, Si semiconductor e.g. p-type or n-type semiconductor

Why is an intrinsic semiconductor doped?

Description : Why is an intrinsic semiconductor doped?

Last Answer : Intrinsic semiconductor is doped in order to increase conductivity of semiconductor. Doping increases majority charge carries either electrons or holes and majority charge carriers responsible for electric current. 

What are the number of valence electrons of atoms in semiconductor?

Description : What are the number of valence electrons of atoms in semiconductor?

Last Answer : There are four valence electrons in the atom of a semiconductor.

what is semiconductor ?

Description : what is semiconductor ?

Last Answer : For simple understanding is that the semiconductor is a partially conductor and partially insulator which depends on the temperature of conductor.

In a single crystal of an intrinsic semiconductor, the number of free carriers at the Fermi level at room

Description : In a single crystal of an intrinsic semiconductor, the number of free carriers at the Fermi level at room temperature is: A) Half the total number of electrons in the crystal B) Zero C) Half the number of atoms in the crystal D) Half the number of free electrons in the crystal

Last Answer : In a single crystal of an intrinsic semiconductor, the number of free carriers at the Fermi level at room temperature is: Zero 

At very high temperatures, extrinsic semiconductor becomes intrinsic semiconductor because

Description : At very high temperatures, extrinsic semiconductor becomes intrinsic semiconductor because (A) Of drive in diffusion of dopants & carriers. (B) Band to band transition dominates impurity ionization. (C) ... band to band transition. (D) Band to band transition is balanced by impurity ionisation.

Last Answer : At very high temperatures, extrinsic semiconductor becomes intrinsic semiconductor because Impurity ionization dominates band to band transition.

A snubber circuit is connected to the power semiconductor device to reduce the

Description : A snubber circuit is connected to the power semiconductor device to reduce the (A) turn-on time (B) turn-off time (C) electrical stresses (D) thermal resistance

Last Answer : A snubber circuit is connected to the power semiconductor device to reduce the electrical stresses

The Semiconductor strain gauges typically have much higher gauge factors than those of metallic strain

Description : The Semiconductor strain gauges typically have much higher gauge factors than those of metallic strain gauges, primarily due to : (A) higher temperature sensitivity (B) higher Poisson’s ratio (C) higher piezoresitive coefficient (D) higher magnetostrictive coefficient

Last Answer : The Semiconductor strain gauges typically have much higher gauge factors than those of metallic strain gauges, primarily due to : higher piezoresitive coefficient

Categories of semiconductor components (Integrated circuit families)

Last Answer : Categories of semiconductor components (Integrated circuit families) Integrated circuits are made from semiconductor material These are divided into three main categories A) ... minus, true or false etc. common families include Transistor Transistor Logic (TTL), CMOS, MOSFET.

Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Description : Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Last Answer : Parts Insulating Materials  Insulation between heating element and base plate of electric iron. Mica Insulation used over copper or aluminium conductor used for making coils.  ... Transformer bushings Porcelain  Insulation between transmission line and pole. Porcelain

Why is aluminium used instead of copper for overhead cables?

Description : Why is aluminium used instead of copper for overhead cables?

Last Answer : Because copper reacts with atmosphere variation and it's cost High as compared to aluminium and aluminium is good property and less cost so aluminium is used

Compare copper and aluminium.

Description : Compare copper and aluminium.

Last Answer : Copper Aluminium Resistivity is less Resistivity is more More weight Low weight Mechanically strong Mechanically weaker Specific Gravity high Specific Gravity Low ... Tensile strength is half of that of copper Used for winding Used for overhead lines

At full -load of a transformer, the iron loss and copper loss are 3000 W and 4000 W respectively. Then total

Description : At full -load of a transformer, the iron loss and copper loss are 3000 W and 4000 W respectively. Then total loss at maximum efficiency is :  (A) 7000 W (B) 6000 W (C) 8000 W (D) 4000 W

Last Answer : At full -load of a transformer, the iron loss and copper loss are 3000 W and 4000 W respectively. Then total loss at maximum efficiency is : 6000 W

How long will glow paints glow?

Description : How long will glow paints glow?

Last Answer : Their info says you might need 30 min of light exposure to charge it, then it will glow for 8 hr (although brightness will gradually ... //www.softschools.com/formulas/chemistry/zinc_sulfide_formula/323/#:~:text=Chemical%20properties%3A%20Zinc%20sulfide%20is,to%20release%20hydrogen%20sulfide%20gas.

Which witch is your favourite witch?

Description : Which witch is your favourite witch?

Last Answer : Samantha of course. I loved Bewitched when I was a child.

How to Solder Copper Pipe

Description : How to Solder Copper Pipe

Last Answer : How to Solder Copper Pipe Copper tubing or pipes work well for air, water or even refrigerants. If you want to join them together with sweat joints , you'll have to learn how to solder them ... effect on their efficiency. Follow these steps and be able to do copper pipe soldering all by yourself.

How to Patina Copper

Description : How to Patina Copper

Last Answer : How to Patina Copper Patina is that tarnish coating that develops outside metal, like copper, over time. Not only does it add an attractive appearance to copper, but it also provides protection to harsh ... egg. Once you've reached the desired patina coat, rinse the copper pieces in lukewarm water.

How to Clean Copper

Description : How to Clean Copper

Last Answer : How to Clean Copper Whether it's a coin, a pan, or a trophy, copper has one of the nicest-looking finishes among common metals. Copper can retain its finish for quite a while, although it is ... properly. With these tips, you'll never have to worry about your copper items losing their shine again.

A 40 kVA transformer has a core loss of 400 W and a full load copper loss of 800 W. The

Description : A 40 kVA transformer has a core loss of 400 W and a full load copper loss of 800 W. The proportion of full load at maximum efficiency is

Last Answer : A 40 kVA transformer has a core loss of 400 W and a full load copper loss of 800 W. The proportion of full load at maximum efficiency is 0.707

Two copper conductors have equal length. The cross-sectional area of one conductor is four times that of the other...

Description : Two copper conductors have equal length. The cross-sectional area of one conductor is four times that of the other. If the conductor having smaller cross-sectional area has a resistance of 40 ohms the resistance of other conductor will be?

Last Answer : Two copper conductors have equal length. The cross-sectional area of one conductor is four times that of the other. If the conductor having smaller cross-sectional area has a resistance of 40 ohms the resistance of other conductor will be 10 ohms.

Copper brushes in D.C. machine are used?

Last Answer : Copper brushes in D.C. machine are used where low voltage and high currents are involved.

The ground wire should not be smaller than No ______ copper.

Last Answer : The ground wire should not be smaller than No 10 copper.

Auto-transformer makes effective saving on copper and copper losses, when its transformation ratio is?

Description : Auto-transformer makes effective saving on copper and copper losses, when its transformation ratio is?

Last Answer : Auto-transformer makes effective saving on copper and copper losses, when its transformation ratio is approximately equal to 1.

How do magnets and copper wire make electricity?

Description : How do magnets and copper wire make electricity?

Last Answer : According  to  Faradays  law , a changing  magnetic  field  on  a  conductor  induses  current  in  the  conductor  through   mutual  induction.

explain skin effect in copper interconnects. what are the various ways of reducing this effect?

Description : explain skin effect in copper interconnects. what are the various ways of reducing this effect?

Last Answer : Skin effect generally observed in ac conductor in transmission network, in skin the current flowing through outer layer of conductor is more than iner area of conductor thus we can say the ... for reducing this effect we can use boundel conductor or used hollow conductor for power transmission

Function of OR Gate its logical symbol and truth table.

Description : Function of OR Gate its logical symbol and truth table.

Last Answer : Function: - OR gate is used to perform logical addition. So used in adder subtractor and logic circuits where logical Oring is required. Used to implement SOP form equations. Also used in PLA logic. Logical symbol of OR gate :- Truth table:- 

State two applications of : (i) PVC paper (ii) Porcelain with type of class based on withstand temperature is insulating material.

Description : State two applications of : (i) PVC paper (ii) Porcelain with type of class based on withstand temperature is insulating material. 

Last Answer :  (i) Application of PVC paper : 1. It is used in slot lining or motor winding insulation purpose 2. For Insulation of Transformer winding (ii) Application of Porcelain : 1. Mainly used for manufacturing ... on withstand temperature : * H' & C' Class of insulation i e. 180° and above 180°C 

What is back emf?

Description : What is back emf? 

Last Answer : Back EMF: When a current carrying conductor is placed in a magnetic field it experiences a force; when it moves due to the force it (conductor) cuts the magnetic field due to which an emf is ... (hence the applied armature voltage) is opposed by the induced emf which is therefore called as Back emf.

What is electrode?

Last Answer : Electrode is a conductor use to make contact with non-metallic part of circuit. anode and cathode are electrodes.

What is another name for an insulator?

Description : What is another name for an insulator?

Last Answer : Dielectric material is another name for an insulator.

What is the function of an electrical filter ?

Description : What is the function of an electrical filter ?

Last Answer : Filter separates different components that are mixed together. Electrical filter can separate different frequency components. Electrical filters are the electrical circuits which are use to remove unwanted frequency components from the signal.

Describe the difference between an open circuit and a short circuit.

Description : Describe the difference between an open circuit and a short circuit.

Last Answer : Open circuit means the wire is cut meaning power will not flow and close circuit means wire is not cut and hence power will flow.Short circuit is the same as close circuit

How does the resistance of a conductor compare to that of an insulator?

Description : How does the resistance of a conductor compare to that of an insulator?

Last Answer : The resistance of a conductor can be significantly lower than the resistance of an insulator, depending on each material's atomic properties.

Instantaneous value of a sine wave voltage

Description : Instantaneous value of a sine wave voltage

Last Answer : Instantaneous value of a sine wave voltage

"FWB" He says he can't offer me what I want right now?

Description : "FWB" He says he can't offer me what I want right now?

Last Answer : “He says he can’t offer me what I want right now” What is it you want? That would make it more clear in order to get answers. And what is FWB?