What will happen when a DC shunt motor is started with a load?

What will happen when a DC shunt motor is started with a load?
by

1 Answer

Answer :

Starting current will be very high so motor will take more current from supply. It may damage the armature winding.
by

Related questions

Why shouldn’t a DC shunt motor start on the heavy load setting?

Description : Why shouldn’t a DC shunt motor start on the heavy load setting?

Last Answer : A series motor never started at no load and a shunt motor is never started at on load.

Why does the speed of a DC shunt motor decrease as the load increases?

Description : Why does the speed of a DC shunt motor decrease as the load increases?

Last Answer : Because if the load is increasing then the torque must also be increase. If not then the speed of motor will decrease.

To conduct load test on a dc shunt motor, it is coupled to a generator which is identical to the motor. The field

Description : To conduct load test on a dc shunt motor, it is coupled to a generator which is identical to the motor. The field of the generator is also connected to the same supply source as the motor. The armature of generator is ... value of this load resistance is  (A) 1.0 (B) 0.98 (C) 0.96 (D) 0.94

Last Answer : To conduct load test on a dc shunt motor, it is coupled to a generator which is identical to the motor. The field of the generator is also connected to the same supply source as the motor. ... obtain rated armature current in both motor and generator. The p.u value of this load resistance is 0.96

With the increase in load on a d.c. shunt motor, speed of the motor

Description : With the increase in load on a d.c. shunt motor, speed of the motor (a) increases proportionately (b) remains constant (c) increase slightly (d) reduces slightly 

Last Answer : With the increase in load on a d.c. shunt motor, speed of the motor reduces slightly.

If load on a d.c. shunt motor is increased, its speed is decreased due primarily to?

Description : If load on a d.c. shunt motor is increased, its speed is decreased due primarily to?

Last Answer : If load on a d.c. shunt motor is increased, its speed is decreased due primarily to decrease in back e.m.f.

If a D.C. shunt motor is working at full load and if shunt field circuit suddenly opens?

Last Answer : If a D.C. shunt motor is working at full load and if shunt field circuit suddenly opens this will make armature to take heavy current, possibly burning it.

A dc series motor driving and electric train faces a constant power load. It is running at rated speed and rated

Description : A dc series motor driving and electric train faces a constant power load. It is running at rated speed and rated voltage. If the speed has to be brought down to 0.25 p.u. the supply voltage has to be approximately brought down to  (A) 0.75 p.u (B) 0.5 p.u (C) 0.25 p.u (D) 0.125 p.u

Last Answer : A dc series motor driving and electric train faces a constant power load. It is running at rated speed and rated voltage. If the speed has to be brought down to 0.25 p.u. the supply voltage has to be approximately brought down to 0.5 p.u

The dc motor, which can provide zero speed regulation at full load without any controller is

Description : The dc motor, which can provide zero speed regulation at full load without any controller is  (A) series (B) shunt (C) cumulative compound (D) differential compound

Last Answer : The dc motor, which can provide zero speed regulation at full load without any controller is shunt 

Which motor should not be started on no-load ?

Last Answer : Series motor should not be started on no-load.

A shunt d.c. motor works on a.c. mains?

Description : A shunt d.c. motor works on a.c. mains?

Last Answer : A shunt d.c. motor works on a.c. mains unsatisfactorily.

A 220 V shunt motor develops a torque of 54 N-m at armature current of 10 A. The torque produced when...

Description : A 220 V shunt motor develops a torque of 54 N-m at armature current of 10 A. The torque produced when the armature current is 20 A, is?

Last Answer : Armature torque, Ta=PØZIa/2πA So Ta1/Ta2=Ia1/Ia2 Ta2=Ta1*Ia2/Ia1        =54*20/10         =108

Unlike a shunt motor, it is difficult for a series motor to stall under heavy loading because?

Description : Unlike a shunt motor, it is difficult for a series motor to stall under heavy loading because?

Last Answer : Unlike a shunt motor, it is difficult for a series motor to stall under heavy loading because it develops high overload torque.

As compared to shunt and compound motors, series motor has the highest torque...

Description : As compared to shunt and compound motors, series motor has the highest torque because of its comparatively .......... at the start.

Last Answer : As compared to shunt and compound motors, series motor has the highest torque because of its comparatively stronger series field at the start.

A d.c. shunt motor is found suitable to drive fans because they require?

Description : A d.c. shunt motor is found suitable to drive fans because they require?

Last Answer : A d.c. shunt motor is found suitable to drive fans because they require small torque at start up, large torque at high speeds.

If the field circuit of a loaded shunt motor is suddenly opened?

Description : If the field circuit of a loaded shunt motor is suddenly opened?

Last Answer : If the field circuit of a loaded shunt motor is suddenly opened circuit breaker or fuse will open the circuit before too much damage is done to the motor.

In a manual shunt motor starter?

Last Answer : In a manual shunt motor starter over load relay is connected in series and no volt relay in parallel with the load.

If the speed of a D.C. shunt motor is increased, the back e.m.f. of the motor will?

Last Answer : If the speed of a D.C. shunt motor is increased, the back e.m.f. of the motor will increase.

An open armature connection in a DC propulsion motor could be caused by ____________. A. low-load operation B. clogged ventilation ducts C. sparking at the brushes D. a grounded shunt field coil

Description : An open armature connection in a DC propulsion motor could be caused by ____________. A. low-load operation B. clogged ventilation ducts C. sparking at the brushes D. a grounded shunt field coil

Last Answer : Answer: B

Regenerative braking (A) Can be used for stopping a motor. (B) Cannot be easily applied to DC series motors. (C) Can be easily applied to DC shunt motors (D) Cannot be used when motor load has overhauling characteristics.

Description : Regenerative braking (A) Can be used for stopping a motor. (B) Cannot be easily applied to DC series motors. (C) Can be easily applied to DC shunt motors (D) Cannot be used when motor load has overhauling characteristics.

Last Answer : Ans: B Because reversal of Ia would also mean reversal of field and hence of Eb

A dc shunt generator has a speed of 800 rpm when delivering 20 A to the load at the terminal voltage of 220V. If the same machine is run as a motor it takes a line current of 20A from 220V supply. The speed of the machine as a motor will be (A) 800 rpm. (B) more than 800 rpm. (C) less than 800 rpm. (D) both higher or lower than 800 rpm.

Description : A dc shunt generator has a speed of 800 rpm when delivering 20 A to the load at the terminal voltage of 220V. If the same machine is run as a motor it takes a line current of 20A from 220V supply. The speed of ... . (B) more than 800 rpm. (C) less than 800 rpm. (D) both higher or lower than 800 rpm.

Last Answer : (C) less than 800 rpm.

A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s.

Description : A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The net Voltage across armature resistance at the time of plugging will be

Last Answer : A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The net Voltage across armature resistance at the time of plugging will be 474 V

State at least one function and the material used for the following parts of DC Motor.

Description : State at least one function and the material used for the following parts of DC Motor.

Last Answer : Part Function Material Yoke -Provides mechanical support for poles -Acts as protecting cover for machine -Provides path for magnetic flux Cast Iron OR Cast Steel Field Winding - ... Pole core  Provides mechanical support to field winding. Cast Iron OR Cast Steel

A DC Motor develops a torque of 150 N-m. A 10 percent reduction in the field flux causes a 50 percent

Description :  A DC Motor develops a torque of 150 N-m. A 10 percent reduction in the field flux causes a 50 percent increase in armature current. The new value of torque is: A) 102.5 N-m B) 202.5 N-m C) 172.5 N-m D) 232.5 N-m

Last Answer : T1=KIf,T2=K1.5I*0.9f T1=150Nm.  T2=T1*1.5*0.9=150*1.35=202.5Nm

Under which of the following conditions is a DC motor provided with compensating winding

Description : Under which of the following conditions is a DC motor provided with compensating winding used?  1. Wide range of speed control above normal  2. Wide range of steady load variation with no speed control  3. Wide range of rapid variation in ...  (a) 1, 2 and 3 (b) 2 and 3 (c) 1 and 2 (d) 1 and 3

Last Answer : Under which of the following conditions is a DC motor provided with compensating winding used?  1. Wide range of speed control above normal  2. Wide range of steady load variation with no speed control  3. Wide range of rapid variation ...  (a) 1, 2 and 3 (b) 2 and 3 (c) 1 and 2 (d) 1 and 3

In DC motor iron losses are occurred in?

Description : In DC motor iron losses are occurred in?

Last Answer : In DC motor iron losses are occurred in the armature.

DC series motor should never be started at no-load. Justify.

Description : DC series motor should never be started at no-load. Justify. 

Last Answer : At no load the field current (which is also the armature current) is very small and hence the useful air-gap field flux. Also the torque is very small.  As N ∝ 1/Ф the speed rises to ... on the rotating parts they may get damaged. Hence DC series motor should never be started on no-load.

The d.c. series motor should never be switched on at no load because?

Description : The d.c. series motor should never be switched on at no load because?

Last Answer : The d.c. series motor should never be switched on at no load because the speed becomes dangerously high.

When load is removed, .......... motor will run at the highest speed.

Description : When load is removed, .......... motor will run at the highest speed.

Last Answer : When load is removed, series motor will run at the highest speed.

Between no-load and full-load, .......... motor develops the least torque.

Description : Between no-load and full-load, .......... motor develops the least torque.

Last Answer : series motor

If the load current and flux of a d.c. motor are held constant and voltage applied ...

Description : If the load current and flux of a d.c. motor are held constant and voltage applied across its armature is increased by 10 per cent, its speed will?

Last Answer : If the load current and flux of a d.c. motor are held constant and voltage applied across its armature is increased by 10 percent, its speed will increase by about 10 percent.

Under constant load conditions, the speed of a d.c. motor is affected by?

Description : Under constant load conditions, the speed of a d.c. motor is affected by?

Last Answer : Under constant load conditions, the speed of a d.c. motor is affected by field flux.

D.C. motor is to a drive a load which is almost nil for certain part of the load cycle...

Description : D.C. motor is to a drive a load which is almost nil for certain part of the load cycle and peak value for short duration. We will select the?

Last Answer : D.C. motor is to a drive a load which is almost nil for certain part of the load cycle and peak value for short duration. We will select the compound motor.

D.C. motor is to drive a load which has certain minimum value for most of the time and some peak value...

Description : D.C. motor is to drive a load which has certain minimum value for most of the time and some peak value for short duration. We will select the?

Last Answer : DC motor mostly preferred is DC series motor becaus the load is continuous for a long time

D.C. shunt motors are used for driving?

Last Answer : D.C. shunt motors are used for driving machine tools.

When using a megohmmeter to determine which shunt field coil is grounded in a DC machine, you must ____________. A. insulate the field frame from the ship's hull B. disconnect each shunt field coil before testing C. use a motor driven high capacity megohmmeter D. remove all main line lead connections before testing

Description : When using a megohmmeter to determine which shunt field coil is grounded in a DC machine, you must ____________. A. insulate the field frame from the ship's hull B. disconnect each shunt ... C. use a motor driven high capacity megohmmeter D. remove all main line lead connections before testing

Last Answer : Answer: B

Which of the listed electrical devices is represented by the symbol shown in the illustration? EL-0055 A. Fixed resistance resistor B. Coil with magnetic core C. DC motor or generator shunt field D. Transformer

Description : Which of the listed electrical devices is represented by the symbol shown in the illustration? EL-0055 A. Fixed resistance resistor B. Coil with magnetic core C. DC motor or generator shunt field D. Transformer

Last Answer : Answer: D

If a DC motor runs hot, the cause may be _____________. A. high mica condition B. low ambient temperature C. clogged ventilation ducts D. an open in the shunt field

Description : If a DC motor runs hot, the cause may be _____________. A. high mica condition B. low ambient temperature C. clogged ventilation ducts D. an open in the shunt field

Last Answer : Answer: C

A short in the shunt field of a DC motor is best located by _____________. A. visual inspection of the commutator B. applying AC voltage to each field coil and measuring the voltage drop across each field coil C. using a growler and hacksaw blade D. isolating each coil from the others and using a megohmmeter

Description : A short in the shunt field of a DC motor is best located by _____________. A. visual inspection of the commutator B. applying AC voltage to each field coil and measuring the voltage drop across ... using a growler and hacksaw blade D. isolating each coil from the others and using a megohmmeter

Last Answer : Answer: B

If a DC motor runs faster than designed, with all other conditions being normal, the possible cause could be a/an ______________. A. shorted shunt field coil B. open armature coil C. reversed commutating pole D. overload

Description : If a DC motor runs faster than designed, with all other conditions being normal, the possible cause could be a/an ______________. A. shorted shunt field coil B. open armature coil C. reversed commutating pole D. overload

Last Answer : Answer: A

One method of testing for a reversed shunt field coil in a DC generator or motor is by connecting the field to a direct current source, at reduced field rated voltage, and test for polarity using a/an ____________. A. iron bar across each field B. magnetic compass placed near each field C. test lamp across adjacent fields D. copper jumper across the interpole connections

Description : One method of testing for a reversed shunt field coil in a DC generator or motor is by connecting the field to a direct current source, at reduced field rated voltage, and test for ... placed near each field C. test lamp across adjacent fields D. copper jumper across the interpole connections

Last Answer : Answer: B

Why Speed Control of Induction Motor is difficult compared to DC shunt motor?

Description : Why Speed Control of Induction Motor is difficult compared to DC shunt motor?

Last Answer : Answer: Speed Control of DC shunt motor can be possible by providing resistance in the armature and field circuits and varying the resistors speed changes can be carried out over a wide range. ... employed. Care should be taken that in the process efficiency and power factor should be maintained.

Give two basic speed control scheme of DC shunt motor?

Description : Give two basic speed control scheme of DC shunt motor?

Last Answer : Answer: 1. By using flux control method: in this method a rheostat is connected across the field wdg to control the field current. So by changing the current the flux produced by the field wdg can ... ) can be varied, and since speed is directly proportional to Eb-IaRa the speed can be controlled.

As compared to shunt and compound DC motors, the series DC motor will have the highest torque because of its comparatively ____________ at the start. (A) Lower armature resistance. (B) Stronger series field. (C) Fewer series turns. (D) Larger armature current.

Description : As compared to shunt and compound DC motors, the series DC motor will have the highest torque because of its comparatively ____________ at the start. (A) Lower armature resistance. (B) Stronger series field. (C) Fewer series turns. (D) Larger armature current.

Last Answer : (D) Larger armature current.

The torque, in a _____________is proportional to the square of the armature current (A) DC shunt motor (B) stepper motor (C) 2-phase servomotor (D) DC series motor

Description : The torque, in a _____________is proportional to the square of the armature current (A) DC shunt motor (B) stepper motor (C) 2-phase servomotor (D) DC series motor

Last Answer : (D) DC series motor

The speed-torque characteristics of a DC series motor are approximately similar to those of the _________motor. (A) universal (B) synchronous (C) DC shunt (D) two-phase

Description : The speed-torque characteristics of a DC series motor are approximately similar to those of the _________motor. (A) universal (B) synchronous (C) DC shunt (D) two-phase

Last Answer : Ans: A Universal motor has same characteristics as DC series motor and also known as an a.c series motor.

A 4 pole lap wound dc shunt motor rotates at the speed of 1500 rpm, has a flux of 0.4 mWb and the total number of conductors are 1000. What is the value of emf? (A) 100 Volts. (B) 0.1 Volts. (C) 1 Volts. (D) 10 Volts.

Description : A 4 pole lap wound dc shunt motor rotates at the speed of 1500 rpm, has a flux of 0.4 mWb and the total number of conductors are 1000. What is the value of emf? (A) 100 Volts. (B) 0.1 Volts. (C) 1 Volts. (D) 10 Volts.

Last Answer : Ans: D Given N = 1500 rpm, Φ = 0.4 mWb, Z = 1000, P = 4, & A= 4 Therefore, Eb = NΦPZ / 60 A = 1500 x 0.4 x 4 x 1000 x 10^-3 / 60 x 4 = 60/6 = 10 volts

The most suitable servomotor for low power applications is (A) a dc series motor. (B) a dc shunt motor. (C) an ac two-phase induction motor. (D) an ac series motor.

Description : The most suitable servomotor for low power applications is (A) a dc series motor. (B) a dc shunt motor. (C) an ac two-phase induction motor. (D) an ac series motor.

Last Answer : (B) a dc shunt motor.

A motor which can conveniently be operated at lagging as well as leading power factors is the (A) squirrel cage induction motor. (B) wound rotor induction motor. (C) synchronous motor. (D) DC shunt motor.

Description : A motor which can conveniently be operated at lagging as well as leading power factors is the (A) squirrel cage induction motor. (B) wound rotor induction motor. (C) synchronous motor. (D) DC shunt motor.

Last Answer : (C) synchronous motor.

DC shunt motor

Description : DC shunt motor

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

If field current is decreased in shunt dc motor, the speed of the motor

Description : If field current is decreased in shunt dc motor, the speed of the motor (a) remains same. (b) increases. (c) decreases. (d) none of the above.

Last Answer : increases