Glass pipes can be joined by (A) Flanges (B) Welding (C) Soldering (D) Bell and spigot joint

Glass pipes can be joined by
(A) Flanges
(B) Welding
(C) Soldering
(D) Bell and spigot joint
by

1 Answer

Answer :

(D) Bell and spigot joint
by

Related questions

__________ joint is usually used for joining cast iron pipes mostly used for temporary pipelines, where it may be necessary to dismantle & reassemble the pipeline very frequently. (A) Collar (B) Flanged (C) Bell and Spigot (D) Expansion

Description : __________ joint is usually used for joining cast iron pipes mostly used for temporary pipelines, where it may be necessary to dismantle & reassemble the pipeline very frequently. (A) Collar (B) Flanged (C) Bell and Spigot (D) Expansion

Last Answer : Option B

The type of joint generally used in cast iron pipes, is (A) Socket and spigot joint (B) Flanged joint (C) Dresser coupling joint (D) All the above

Description : The type of joint generally used in cast iron pipes, is (A) Socket and spigot joint (B) Flanged joint (C) Dresser coupling joint (D) All the above

Last Answer : (D) All the above

The joint used for joining the plain ends of cast iron pipes, is (A) Flanged joint (B) Socket and spigot joint (C) Dresser coupling joint (D) Flexible joint

Description : The joint used for joining the plain ends of cast iron pipes, is  (A) Flanged joint  (B) Socket and spigot joint  (C) Dresser coupling joint  (D) Flexible joint 

Last Answer : (C) Dresser coupling joint 

Out of the following, the joint produced by __________ has the lowest strength. (A) Soldering (B) Welding (C) Brazing (D) Riveting

Description : Out of the following, the joint produced by __________ has the lowest strength. (A) Soldering (B) Welding (C) Brazing (D) Riveting

Last Answer : (A) Soldering

Large diameter reinforced cement concrete (RCC) pipes are generally joined by __________ joint. (A) Flanged iron (B) Collar (C) Flexible (D) Expansion

Description : Large diameter reinforced cement concrete (RCC) pipes are generally joined by __________ joint. (A) Flanged iron (B) Collar (C) Flexible (D) Expansion

Last Answer : Option B

Asbestos pipes are joined by means of (A) Flanged joint (B) Flexible joint (C) Dresser coupling joint (D) Simplex joint

Description : Asbestos pipes are joined by means of (A) Flanged joint (B) Flexible joint (C) Dresser coupling joint (D) Simplex joint

Last Answer : (D) Simplex joint

Which of the subsequent must not be a section of cotter joint? a) Socket b) Spigot c) Cotter d) Collar

Description : Which of the subsequent must not be a section of cotter joint? a) Socket b) Spigot c) Cotter d) Collar

Last Answer : d) Collar

Which of the following is not a part of cotter joint? a) Socket b) Spigot c) Cotter d) Collar

Description : Which of the following is not a part of cotter joint? a) Socket b) Spigot c) Cotter d) Collar

Last Answer : d) Collar

At the socket and spigot joint, (A) Enlarged end of the pipe is called socket (B) Normal end of the pipe is called spigot (C) Spigot is fitted into the socket (D) All the above

Description : At the socket and spigot joint, (A) Enlarged end of the pipe is called socket (B) Normal end of the pipe is called spigot (C) Spigot is fitted into the socket (D) All the above

Last Answer : (D) All the above

In pumping stations, the type of joint generally used, is (A) Socket and spigot joint (B) Flanged joint (C) Expansion joint (D) Dresser coupling joint

Description : In pumping stations, the type of joint generally used, is (A) Socket and spigot joint (B) Flanged joint (C) Expansion joint (D) Dresser coupling joint

Last Answer : (B) Flanged joint

Explain About Spigot And Socket Joint?

Description : Explain About Spigot And Socket Joint?

Last Answer : This joint is generally used to connect cast iron pipes which are buried in ground .This is also suitable for straight pipe line carrying water and this joint has less rigidity.

Ratings for welding neck flanges under ASME B16.5 are based upon which of the following? a) The flange thickness and 40,000 psi yield strength. b) The hub thickness at the welding end and 40,000 psi yield strength. c) The weld metal yield strength. d) The piping wall thickness and yield strength.

Description : Ratings for welding neck flanges under ASME B16.5 are based upon which of the following? a) The flange thickness and 40,000 psi yield strength. b) The hub thickness at the welding end and ... psi yield strength. c) The weld metal yield strength. d) The piping wall thickness and yield strength.

Last Answer : b) The hub thickness at the welding end and 40,000 psi yield strength

Use of flux during soldering is done to (A) Increase fluidity of solder by lowering its melting temperature (B) Prevent oxide formation (C) Wash away surplus solder (D) Full up the joint gap

Description : Use of flux during soldering is done to (A) Increase fluidity of solder by lowering its melting temperature (B) Prevent oxide formation (C) Wash away surplus solder (D) Full up the joint gap

Last Answer : (B) Prevent oxide formation

The joint for soldering is supported by binding wire made of (A) Mild steel (B) Copper (C) Soft iron (D) Stainless steel

Description : The joint for soldering is supported by binding wire made of (A) Mild steel (B) Copper (C) Soft iron (D) Stainless steel

Last Answer : Option C

Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the tip diameter should be equal to t (where, t = plate thickness to be welded) (C) In spot welding, two pieces to be joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Description : Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the ... joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Last Answer : (D) Mild steel sheet cannot be spot welded

Larger length & diameter water pipes are made by (A) Electrical resistance welding (B) Die casting (C) Semi-centrifugal casting (D) Continuous casting

Description : Larger length & diameter water pipes are made by (A) Electrical resistance welding (B) Die casting (C) Semi-centrifugal casting (D) Continuous casting

Last Answer : options A

Larger length & diameter water pipes are made by (A) Electrical resistance welding (B) Die casting (C) Semi-centrifugal casting (D) Continuous casting

Description : Larger length & diameter water pipes are made by (A) Electrical resistance welding (B) Die casting (C) Semi-centrifugal casting (D) Continuous casting

Last Answer : Option C

When troubleshooting an electronic circuit, a cold solder joint can be located with the aid of an ohmmeter. Once the problem has been located, you should _________________. A. reheat the circuit in an oven to an even temperature and recheck with an ohmmeter B. reheat the connection with a match and recheck with an ohmmeter C. reheat connection with a soldering tool and recheck with an ohmmeter D. do nothing as this is the normal condition

Description : When troubleshooting an electronic circuit, a cold solder joint can be located with the aid of an ohmmeter. Once the problem has been located, you should _________________. A. reheat the circuit in an ... a soldering tool and recheck with an ohmmeter D. do nothing as this is the normal condition

Last Answer : Answer: C

Compare Brazing and Soldering on the basis of : (i) Temperature Used. (ii) Filler Material. (iii) Joint Strength (iv) Applications.

Description : Compare Brazing and Soldering on the basis of : (i) Temperature Used. (ii) Filler Material. (iii) Joint Strength (iv) Applications.

Last Answer : Comparison of Brazing and Soldering:

Cast iron detachable joint is used in __________ pipes. (A) Steel (B) Cast iron (C) Asbestos cement (D) Reinforced cement concrete

Description : Cast iron detachable joint is used in __________ pipes. (A) Steel (B) Cast iron (C) Asbestos cement (D) Reinforced cement concrete

Last Answer : (A) Steel

Lead is poured into the joint between two- __________ pipes. (A) Mild steel (B) Concrete (C) Cast iron (D) Asbestos cement

Description : Lead is poured into the joint between two- __________ pipes. (A) Mild steel (B) Concrete (C) Cast iron (D) Asbestos cement

Last Answer : (C) Cast iron

Lead is poured into the joint between two __________ pipes. (A) Mild steel (B) Concrete (C) Cast iron (D) Asbestos cement

Description : Lead is poured into the joint between two __________ pipes. (A) Mild steel (B) Concrete (C) Cast iron (D) Asbestos cement

Last Answer : Option C

__________ joint is mostly used for joining pipes carrying water at low pressure. (A) Nipple (B) Socket (C) Union

Description : __________ joint is mostly used for joining pipes carrying water at low pressure. (A) Nipple (B) Socket (C) Union

Last Answer : Option B

In joints, the bones invovled are joined together with the help of cargtilages. The joint between the adjacent vertebrae in the vertebral column is of

Description : In joints, the bones invovled are joined together with the help of cargtilages. The joint between the adjacent vertebrae in the vertebral column is of

Last Answer : In joints, the bones invovled are joined together with the help of cargtilages. The joint between ... pattern and it permits limited movements, is-

Which one of the following is the correct description of a certain part of a normal human skeleton? (a) Parietal bone and the temporal bone of the skull are joined fibrous joint. (b) First vertebra is axis which articulates with the occipital condyles. (c) The 9th and 10th pairs of ribs are called the floating ribs. (d) Glenoid cavity is a depression to which the thigh bone articulates.

Description : Which one of the following is the correct description of a certain part of a normal human skeleton? (a) Parietal bone and the temporal bone of the skull are joined fibrous joint. (b) First ... called the floating ribs. (d) Glenoid cavity is a depression to which the thigh bone articulates.

Last Answer : (a) Parietal bone and the temporal bone of the skull are joined fibrous joint.

If b is the width of a plate joined by diamond riveting of diameter d, the efficiency of the joint is given by (A) (b + d)/b (B) (b - d)/b (C) (d - b)/d (D) (b - d)/d

Description : If b is the width of a plate joined by diamond riveting of diameter d, the efficiency of the joint is  given by  (A) (b + d)/b (B) (b - d)/b (C) (d - b)/d (D) (b - d)/d

Last Answer : (B) (b - d)/b

Brine solution is stored/treated in __________ lined vessels/pipes. (A) Rubber (B) Lead (C) Glass (D) Nickel

Description : Brine solution is stored/treated in __________ lined vessels/pipes. (A) Rubber (B) Lead (C) Glass (D) Nickel

Last Answer : (D) Nickel

What provides the joint travel in automatic welding?

Description : What provides the joint travel in automatic welding?

Last Answer : Need answer

Forge welding involves heating of parts to elastic stage and joint is prepared by impact force. a) Yes b) No, it is done up to plastic stage c) Heating is done up to boiling point d) None of the listed

Description : Forge welding involves heating of parts to elastic stage and joint is prepared by impact force. a) Yes b) No, it is done up to plastic stage c) Heating is done up to boiling point d) None of the listed

Last Answer : b) No, it is done up to plastic stage

Pick up the incorrect statement (A) The cross-sectional area of the welded member is effective (B) A welded joint develops strength of its parent metal (C) Welded joints provide rigidity (D) Welding takes more time than riveting

Description : Pick up the incorrect statement (A) The cross-sectional area of the welded member is effective (B) A welded joint develops strength of its parent metal (C) Welded joints provide rigidity (D) Welding takes more time than riveting

Last Answer : (D) Welding takes more time than riveting

Q-6 which innovative welding technique is used by L & T in T joint welding?

Description : Q-6 which innovative welding technique is used by L & T in T joint welding?

Last Answer : In T joint welding backing is required in other side while welding on one side. Flux goes on another side from the root opening and that has to be removed before welding other side. During the ... of the job is also not required by other sources since one side of welding serve the purpose.

In a welding procedure transverse joint tensile test the following observations were made. The specimen CSA was recorded as 30mm x 20mm and the maximum load applied was recorded as 200kN. What is the UTS? a) 33kN/mm2b) 333N/mm2c) 3333N/mm2d) 33N/mm2

Description : In a welding procedure transverse joint tensile test the following observations were made. The specimen CSA was recorded as 30mm x 20mm and the maximum load applied was recorded as 200kN. What is the UTS? a) 33kN/mm2b) 333N/mm2c) 3333N/mm2d) 33N/mm2

Last Answer : b) 333N/mm2

Dead mild steel, which contains 0.10 to 0.15 percent carbon is used for making (A) Shafts (B) Flanges (C) Gears (D) Shear blades

Description : Dead mild steel, which contains 0.10 to 0.15 percent carbon is used for making (A) Shafts (B) Flanges (C) Gears (D) Shear blades

Last Answer : (B) Flanges

The ringing of an electric bell in an enclosed evacuated glass bell jar is not heard outside because - (1) the ringing is not loud enough (2) the glass of the bell jar absorbs the sound waves (3) the bell jar is too small (4) there is no air or any other gas in the bell jar

Description : The ringing of an electric bell in an enclosed evacuated glass bell jar is not heard outside because - (1) the ringing is not loud enough (2) the glass of the bell jar absorbs the sound waves (3) the bell jar is too small (4) there is no air or any other gas in the bell jar

Last Answer : (4) there is no air or any other gas in the bell jar

Welding of glass is done by

Description : Welding of glass is done by 1. Ultrasonic welding 2. Electron beam welding 3. Laser beam welding 4. Explosive welding

Last Answer : Welding of glass is done by Laser beam welding

When a train is rounding a curve to prevent side thrust on the wheel flanges of cars a.Opposite thrust is created to counter balance this thrust b.Guide rail sections are provided to take care of thrust c.Thrust eliminators are provided in the train d.Outside rails are realised e.Rail section is made thick on curvature

Description : When a train is rounding a curve to prevent side thrust on the wheel flanges of cars a.Opposite thrust is created to counter balance this thrust b.Guide rail sections are provided to take care of ... are provided in the train d.Outside rails are realised e.Rail section is made thick on curvature

Last Answer : d. Outside rails are realised

How can flanges be classified based on pipe attachment?

Description : How can flanges be classified based on pipe attachment?

Last Answer : Flange joint is one of the methods of pipe joints. Piping and flanges are classified in different ways based on pipe attachment, Pressure-Temperature (PT) rating, facing, face finish. Below ... at the socket. Socket welded flanges shall be specified with connection pipe thickness to ensure pro

Different Types of Flanges Used in Piping Applications?

Description : Different Types of Flanges Used in Piping Applications?

Last Answer : Different Types of Flanges Slip on Flanges Weld Neck Flanges Blind Flanges Socket Weld Flanges Lap Joint Flanges Threaded Flanges Orifice Flanges Spectacle Blind Flanges Reducing Flanges Forged Flanges ANSI ... If anyone wants to buy any of these Flanges then Contact us: sales@nufitpiping .com

What is Uses of Flanges in Petrochemical Industries?

Description : What is Uses of Flanges in Petrochemical Industries?

Last Answer : A flange is a mechanism by which tubing, valves, pumps, and other machinery are linked to create a piping structure. It also makes washing, review or alteration easy to access. ... petrochemical entrants has put extreme pressure on the demand for pipe fitters. Ongoing production line projects

What is Difference Between FF & RF Flanges?

Description : What is Difference Between FF & RF Flanges?

Last Answer : Flanges are an integral part of the Piping industry. These Flanges are used to form a link between two different Pipes. Flat (FF), elevated (RF), ring joint (RTJ), lap joint (M&F), tongue ... Various types of flange faces are used to seat the sealing gasket content as the contact surfaces. The faces

In grillage foundations, distance between flanges of grillage beams, is kept (A) 40 cm (B) Equal to flange width (C) Twice the flange width (D) Maximum of (a), (b) and (c)

Description : In grillage foundations, distance between flanges of grillage beams, is kept (A) 40 cm (B) Equal to flange width (C) Twice the flange width (D) Maximum of (a), (b) and (c)

Last Answer : Answer: Option C

What Is Flange? Types Of Flanges?

Description : What Is Flange? Types Of Flanges?

Last Answer : Flanges used to connect both lines (Fluid, Gas, Oil, Water….)  Thread Type Flange  Modified Flange  Weld Neck Flange  Slip On Flange  Goose Neck Flange  Socket Weld Flange  Stepped Flange  Spade Flange  Spectacle Flange  Blind Flange

This type seed metering mechanism consist of wheel with fine and coarse ribbed flanges. b. fluted feed c. Cup feed d. None of the above

Description : This type seed metering mechanism consist of wheel with fine and coarse ribbed flanges. b. fluted feed c. Cup feed d. None of the above

Last Answer : Ans - a. Internal double run

The thickness of web for unstiffened plate girder with clear distance‘d’ between the flanges shall be not less than

Description : The thickness of web for unstiffened plate girder with clear distance‘d’ between the flanges shall be not less than

Last Answer : d/85

When winding a tape onto a plastic or metal reel, should the tape ever touch the reel’s flanges?

Description : When winding a tape onto a plastic or metal reel, should the tape ever touch the reel’s flanges?

Last Answer : No. The reel is designed to hold the tape on its hub without letting the tape touch the sides of the flanges.

Which of the following is required to be hydrostatically tested per ASME B31.3? a) Flanges. b) Flanged fittings. c) Flanges and flanged fittings. d) There is no hydrostatic testing requirement in ASME B16.5.

Description : Which of the following is required to be hydrostatically tested per ASME B31.3? a) Flanges. b) Flanged fittings. c) Flanges and flanged fittings. d) There is no hydrostatic testing requirement in ASME B16.5.

Last Answer : b) Flanged fittings.

When a raised face flange gasket surface is machined to a flat face surface, does the flange still comply with ASME B31.3? a) No. b) Yes. c) Yes, provided the flange meets thickness requirements for flat faced flanges per ASME B31.3. d) Yes, if approached by the flange committee.

Description : When a raised face flange gasket surface is machined to a flat face surface, does the flange still comply with ASME B31.3? a) No. b) Yes. c) Yes, provided the flange meets thickness requirements for flat faced flanges per ASME B31.3. d) Yes, if approached by the flange committee.

Last Answer : c) Yes, provided the flange meets thickness requirements for flat faced flanges per ASME B31.3.

Which of the following is not recommended by ASME B31.3 when assembling gray cast iron flanges? a) Use high strength bolting at all times. b) Carefully align the flanges. c) Carefully control bolt torque. d) Ensure piping loads transmitted to the flanges are within design conditions.

Description : Which of the following is not recommended by ASME B31.3 when assembling gray cast iron flanges? a) Use high strength bolting at all times. b) Carefully align the flanges. c) Carefully control bolt torque. d) Ensure piping loads transmitted to the flanges are within design conditions.

Last Answer : a) Use high strength bolting at all times.

Plate material is permitted for use in the construction of which of the following? a) Flange hubs. b) Blind Flanges. c) Elbows. d) All of the above.

Description : Plate material is permitted for use in the construction of which of the following? a) Flange hubs. b) Blind Flanges. c) Elbows. d) All of the above.

Last Answer : b) Blind Flanges.

Flanges and flanged fittings may be constructed of which of the following materials? a) Castings. b) Forgings. c) Plate. d) All of the above.

Description : Flanges and flanged fittings may be constructed of which of the following materials? a) Castings. b) Forgings. c) Plate. d) All of the above.

Last Answer : d) All of the above.