# How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

How many 8-bit characters can be
transmitted per second over a 9600 baud
asynchronous mode of transmission with
one start bit, eight data bits, two stop bits,
and one parity bit ?
a. 600
b. 800
c. 876
d. 1200

b. 800

## Related questions

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

Description : How many characters per sec (7 bits + 1 parity ) can be transmitted over a 2400 bps line if the transfer is synchronous (1 start and 1 stop bit)?

Last Answer : 1. 300 2. 240 3. 250 4. 275 Ans- 2400/(7+1+2) 240

Description : In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) Baud C) Bits per second D) Both B and C

Description : In asynchronous serial communication the physical layer provides ___________ a. start and stop signalling b. flow control c. both start & stop signalling and flow control d. only start signalling

Last Answer : c. both start & stop signalling and flow control

Description : How many characters per sec (7 bits + 1 parity) can be transmitted over a 2400 bps line if the transfer is synchronous (1 start bit and 1 stop bit)?  A) 300 B) 240 C) 250 D) 275

Last Answer : How many characters per sec (7 bits + 1 parity) can be transmitted over a 2400 bps line if the transfer is synchronous (1 start bit and 1 stop bit)?  300

Description : The baud rate of a signal is 600 baud/second. If each signal unit carries 6 bits, then the bit rate of a signal is ................. (A) 3600 (B) 100 (C) 6/600 (D) None of the above

Description : Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Description : What arethe most commonly used transmission speeds in BPS usedin datacommunication? A. 300 B. 1200 C. 2400 D. 9600 E. None of the above

Description : Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half ... in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Last Answer : Batch processing is the prefered processing mode for telecommunication operation.

Description : If digitaldata rateof 9600 bps is encoded using 8-level phaseshift keying (PSK) method, the modulation rate is A. 1200 bands B. 3200 bands C. 4800 bands D. 9600 bands E. None of the above

Description : Assuming 8 bits for data, 1 bit for parity, I start bit and 2 stop bits, the number of characters that 1200 BPS communication line can transmit is

Last Answer : Assuming 8 bits for data, 1 bit for parity, I start bit and 2 stop bits, the number of characters that 1200 BPS communication line can transmit is 12CPS.

Description : What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) Baud C) Bits per second

Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps

Last Answer : d. 3200 bps

Description : The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Last Answer : they contain clock recovery circuits

Description : The synchronous modems are more costly than the asynchronous modemsbecause A. they produce largevolumeof data B. they contain clock recovery circuits C. they transmit thedata with stop and start bits. D. they operate witha largerbandwidth E. None of the above

Last Answer : they contain clock recovery circuits

Description : ECE Board Exam March 1996 What is the transmission rate of a system for transmitting the output of a microcomputer to a line printer operating at a speed of 30 lines/minute? Assume that the line printer has 8 bits ... and prints out 80 characters/line. A. 800 bps B. 400 bps C. 320 bps D. 640 bps

Last Answer : C. 320 bps

Description : In_________ transmission, we send bits oneafter another without startor stop bits or gaps. It is the responsibilityof the receiver togroup the bits. A) synchronous B) asynchronous C) isochronous D) none of the abov

Description : In serial communication modes, mode 1 the Baud rate = a) BR=2SMOD/32 * (Timer 0 over flow rate) b) BR=2SMOD/16 * (Timer 1 over flow rate) c) BR=2SMOD/16 * (Timer 0 over flow rate) d) BR=2SMOD/32 * (Timer 1 over flow rate)

Last Answer : b) BR=2SMOD/16 * (Timer 1 over flow rate)

Description : If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS

Last Answer : c. 32 Kbps

Description : Consider a source computer(S) transmitting a file of size 106 bits to a destination computer (D)over a network of two routers (R1 and R2) and three links(L1, L2, and L3). L1connects S to R1; L2 connects R1 to ... file from S to D? a. 1005 ms b. 1010 ms c. 3000 ms d. 3003 ms Answer: Option(a)

Last Answer : a. 1005 ms

Description : In_______transmission, bits aretransmittedover asingle wire, one ata time. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Last Answer : (a) and (b)

Description : In_______transmission, bits aretransmittedsimultaneously,each across its own wire. A) Asynchronous serial B) Synchronous serial C) Parallel D) (a) and (b)

Description : An analog signal carries 4 bits in each signal unit. If 1000 signal units are sent per second, then baud rate and bit rate of the signal are ............... and .............. (A) 4000 bauds \ sec & ... (B) 2000 bauds \ sec & 1000 bps (C) 1000 bauds \ sec & 500 bps (D) 1000 bauds \ sec & 4000 bps

Last Answer : (D) 1000 bauds \ sec & 4000 bps Explanation: Bit rate is the number of bits per second. Baud rate is the number of signal units per second. Baud rate is less than or equal to the bit rate. Baud rate = 1000 bauds per second (baud/s) Bit rate = 1000 x 4 = 4000 bps

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above

Description : Usually, it takes10-bits to represent one character. How many characters can betransmittedat a speed of 1200 BPS? A. 10 B. 12 C. 120 D. 1200 E. None of the above

Description : The _____ layer uses data compression to reduce the number of bits to be transmitted. a. presentation b. network c. data link d. application

Description : What is the minimum number of wires needed to send data over a serial communication link layer? a. 1 b. 2 c. 4 d. 6 e. none of above

Description : Which data communication method is used to transmit the data over a serial communication link? a. simplex b. half-duplex c. full-duplex d. b and c e. None of above

Description : Which error detection method consists of just one redundant bit per data unit? A) Simple parity check B) Two-dimensionalparity check C) CRC D) Checksum

Last Answer : Simple parity check

Description : If the bit rate for an FSK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200

Description : f the bit rate for an ASK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200

Description : The cheapest modems cantransmit A. 300 bits per second B. 1,200 bitsper second C. 2,400 bits per second D. 4,800 bits per second E. None of the above

Last Answer : 300 bits per second

Description : An analog signal has a bit rate of 6000 bps and a baud rate of 2000 baud. How many data elements are carried by each signal element ? (A) 0.336 bits/baud (B) 3 bits/baud (C) 120,00,000 bits/baud (D) None of the above

Last Answer : (B) 3 bits/baud

Description : What is the usualnumber of bits transmitted simultaneously inparalleldata transmission used by microcomputers? A. 16 B. 9 C. 8 D. 4 E. None of the above

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : The data rate is sometimes calledthe ___ rate. A) baud B) bit C) signal D) none of the above

Description : The ________ rate defines thenumber of dataelements sent in1s; the______ rate is the numberof signalelements sent in 1s. A) data; signal B) signal; data C) baud; bit D) none of the above

Description : What is the commonly used unit for measuring the sped of data transmission? 1) Bits per second 2) Nano seconds 3) Characters per second 4) Mega Hertz

Last Answer : 1) Bits per second

Description : What is the commonly used unit for measuring the speed of data transmission ? (1) Mega Hertz (2) Characters per second (3) Bits per second (4) Nano seconds

Last Answer : Bits per second

Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is ............... (A) 400 bps (B) 800 bps (C) 1600 bps (D) 3200 bps

Last Answer : (D) 3200 bps Answer: D Explanation: The multiplexer is shown in the Figure. Each frame carries 1 byte from each channel; the size of each frame, therefore, is 4 bytes, or 32 bits. Because each ... channel, the frame rate must be 100 frames per second. The bit rate is 100 32 = 3200 bps.

Description : The ________ modeprovides synchronizationfor the entire stream of bits must. In other words, it guarantees that the data arrive ata fixed rate. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Description : The start and stop bits are used in serial communication for (A) error detection (B) error correction (C) synchronization (D) slowing down the communication

Description : A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Description : A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Description : What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) BaudC) Bits per second D) Both B and C