The address resolution protocol (ARP) is used for a. Finding the IP address from the DNS b. Finding the IP address of the default gateway c. Finding the IP address that corresponds to a MAC address d. Finding the MAC address that corresponds to an IP address

The address resolution protocol (ARP) is
used for
a. Finding the IP address from the DNS
b. Finding the IP address of the default
gateway
c. Finding the IP address that
corresponds to a MAC address
d. Finding the MAC address that
corresponds to an IP address
by

1 Answer

Answer :

Finding the MAC address that
corresponds to an IP address
by

Related questions

Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? a. ARQ (Automatic Repeat Request) b. ARP (Address Resolution Protocol) c. SLIP (Serial Line Internet Protocol) d. PLIP (Parallel Line Internet Protocol)

Description : Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? a. ARQ (Automatic Repeat Request) b. ARP (Address Resolution Protocol) c. SLIP (Serial Line Internet Protocol) d. PLIP (Parallel Line Internet Protocol)

Last Answer : b. ARP (Address Resolution Protocol)

Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? A. ARQ Automatic Repeat Request B. ARP Address Resolution Protocol C. SLIP Serial Line Internet Protocol D. PLIP Parallel Line Internet Protocol

Description : Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? A. ARQ Automatic Repeat Request B. ARP Address Resolution Protocol C. SLIP Serial Line Internet Protocol D. PLIP Parallel Line Internet Protocol

Last Answer : B. ARP Address Resolution Protocol

…………………………………. converts a physical network address into an IP address. A. ARP B. RARP C. DNS D. DHCP

Description : …………………………………. converts a physical network address into an IP address. A. ARP B. RARP C. DNS D. DHCP

Last Answer : B. RARP

Which protocol does switch use at the layer 2 for finding MAC address? a. ICMP b. UDP c. ARP d. TCP

Description : Which protocol does switch use at the layer 2 for finding MAC address? a. ICMP b. UDP c. ARP d. TCP

Last Answer : c. ARP

………………….. is responsible for converting the higher level protocol addresses (IP addresses) to physical network addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Description : ………………….. is responsible for converting the higher level protocol addresses (IP addresses) to physical network addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Last Answer : A) Address Resolution Protocol (ARP)

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) Address Resolution Protocol (ARP) A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) ... C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control)c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above

A packet whose destination is outside the local TCP/IP network segment is sent to .............. (1) File server (2) DNS server (3) DHCP server (4) Default gateway

Description : A packet whose destination is outside the local TCP/IP network segment is sent to .............. (1) File server (2) DNS server (3) DHCP server (4) Default gateway

Last Answer : Answer: 4 

The ________ protocol is the transmission mechanism used by the TCP/IP suite. A) ARP B) IP C) RARP D) noneof the above

Description : The ________ protocol is the transmission mechanism used by the TCP/IP suite. A) ARP B) IP C) RARP D) noneof the above

Last Answer : IP

Which protocol does HTTP (Hyper Text Transfer Protocol) - use for transferring web pages at the Transport layer a. IP b. UDP c. TCP d. ARP

Description : Which protocol does HTTP (Hyper Text Transfer Protocol) - use for transferring web pages at the Transport layer a. IP b. UDP c. TCP d. ARP

Last Answer : c. TCP

State weather the following statement is true or false for Internetwork layer. 1).Other internetwork-layer protocols are IP, ICMP, IGMP, ARP, and RARP. 2). Internet Protocol (IP) is the least important protocol in this layer 3). The internetwork layer, also called the internet layer or the network layer, provides the “virtual network” A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3.true C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false

Description : State weather the following statement is true or false for Internetwork layer. 1).Other internetwork-layer protocols are IP, ICMP, IGMP, ARP, and RARP. 2). Internet Protocol (IP) is the least important protocol in this layer ... 3.true C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false

Last Answer : B. 1. true, 2. false, 3.true

........ is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Description : ........ is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Last Answer : D) Internet Control Message Protocol (ICMP)

........... is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Description : ........... is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Last Answer : A) Address Resolution Protocol (ARP)

_______ isa dynamic mapping protocol in which a physical address is found for agiven logicaladdress. A) ARP B) RARP C) botha and b D) noneof the above

Description : _______ isa dynamic mapping protocol in which a physical address is found for agiven logicaladdress. A) ARP B) RARP C) botha and b D) noneof the above

Last Answer : ARP

The _______ is a dynamic mapping protocol in which a physical address is found for a given logical address. A. ARP B. RARP C. both a and b D. none of the above

Description : The _______ is a dynamic mapping protocol in which a physical address is found for a given logical address. A. ARP B. RARP C. both a and b D. none of the above

Last Answer : B. RARP

Which of the following technique isused for encapsulation? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets. B. a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame. C. One of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Description : Which of the following technique isused for encapsulation? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets. B. a technique used by protocols in which a lower level ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Last Answer : a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame

Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame C. one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Description : Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Last Answer : one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size

DNS can obtain the of host if its domain name is known and vice versa. A) Station address B) IP address C) Port address D) Checksum

Description : DNS can obtain the of host if its domain name is known and vice versa. A) Station address B) IP address C) Port address D) Checksum

Last Answer : B) IP address

. The newer technique uses a distributed database system called ………………….. to translate names to addresses. A. DNS B. IPC. ARP D. Telnet

Description : . The newer technique uses a distributed database system called ………………….. to translate names to addresses. A. DNS B. IP C. ARP D. Telnet

Last Answer : A. DNS

There are two processes to pair MAC address with IP addresses. Which process finds an IP address from a MAC address? * RARP * ARP * RIP * IGRP

Description : There are two processes to pair MAC address with IP addresses. Which process finds an IP address from a MAC address? * RARP * ARP * RIP * IGRP

Last Answer : Correct answer: A ARP (Address Resolution Protocol) maps an IP address to the MAC address, RARP (Reverse Address Resolution Protocol) maps the MAC address to the IP address. ARP and RARP work at the internet layer of the Internet Model or the network layer of the OSI model.

In _______forwarding, the full IP address of a destination isgiven in the routing table. A) next-hop B) network-specific C) host-specific D) default

Description : In _______forwarding, the full IP address of a destination isgiven in the routing table. A) next-hop B) network-specific C) host-specific D) default

Last Answer : host-specific

Which of the following devices takes data sent from one network device and forwards it to the destination node based on MAC address ? a. Hub b. Modem c. Switch d. Gateway

Description : Which of the following devices takes data sent from one network device and forwards it to the destination node based on MAC address ? a. Hub b. Modem c. Switch d. Gateway

Last Answer : c. Switch

HMP (Host Monitoring Protocol) is: A. a TCP/IP protocol used todynamically bind ahigh level IP Address to alow-level physical hardware address B. a TCP/IP high level protocol for transferring files from one machine to another. C. a protocol used to monitor computers D. a protocol that handles error andcontrol messages E. None of the above

Description : HMP (Host Monitoring Protocol) is: A. a TCP/IP protocol used todynamically bind ahigh level IP Address to alow-level physical hardware address B. a TCP/IP high level protocol for transferring ... used to monitor computers D. a protocol that handles error andcontrol messages E. None of the above

Last Answer : a protocol used to monitor computers

ICMP (Internet Control Message Protocol) is A. a TCP/IP protocol used todynamically bind ahigh level IP Address to alow-level physical hardware address B. a TCP/IP high level protocol for transferring filesfrom one machine to another C. a protocol used to monitor computersD.a protocol that handles error andcontrol messagesE.None of the above

Description : ICMP (Internet Control Message Protocol) is A. a TCP/IP protocol used todynamically bind ahigh level IP Address to alow-level physical hardware address B. a TCP/IP high level protocol for transferring ... to monitor computers D. a protocol that handles error andcontrol messages E. None of the above

Last Answer : a protocol that handles error andcontrol messages

A layer-4 firewall (a device that can look at all protocol headers up to the transport layer) CANNOT a. block entire HTTP traffic during 9:00PM and 5 :0OAM b. block all ICMP trafficc. stop incoming traffic from a specific IP address but allow outgoing traffic to the same IP address d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

Description : A layer-4 firewall (a device that can look at all protocol headers up to the transport layer) CANNOT a. block entire HTTP traffic during 9:00PM and 5 :0OAM b. block all ICMP traffic c. stop ... address d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

Last Answer : d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

In the TCP/IP protocol suite, which one of the following is NOT part of the IP header? a. Fragment Offset b. Source IP address c. Destination IP address d. Destination port number

Description : In the TCP/IP protocol suite, which one of the following is NOT part of the IP header? a. Fragment Offset b. Source IP address c. Destination IP address d. Destination port number

Last Answer : d. Destination port number

What are the common protocols associated with the network layer? a. Address Resolution Protocol b. Reverse Address Resolution Protocol c. Internet protocol d. Neighbour Discovery Protocol

Description : What are the common protocols associated with the network layer? a. Address Resolution Protocol b. Reverse Address Resolution Protocol c. Internet protocol d. Neighbour Discovery Protocol

Last Answer : c. Internet protocol

The ………………………. protocol was originally developed as a mechanism to enable diskless hosts to be remotely booted over a network as workstations. A. RARP B. ARP C. DHCP D. BOOTP

Description : The ………………………. protocol was originally developed as a mechanism to enable diskless hosts to be remotely booted over a network as workstations. A. RARP B. ARP C. DHCP D. BOOTP

Last Answer : D. BOOTP

TCP/IP layer corresponds to the OSI models to three layers. A) Application B) Presentation C) Session D) Transport

Description : TCP/IP layer corresponds to the OSI models to three layers. A) Application B) Presentation C) Session D) Transport

Last Answer : A) Application

The TCP/IP …………corresponds to the combined session, presentation, and application layers of the OSI model. a.session layer b.presentation layer c.application layer d.None of the above

Description : The TCP/IP …………corresponds to the combined session, presentation, and application layers of the OSI model. a.session layer b.presentation layer c.application layer d.None of the above

Last Answer : c.application layer

Which one of the following uses UDP as the transport protocol? a. HTTP b. Telnet c. DNS d. SMTP

Description : Which one of the following uses UDP as the transport protocol? a. HTTP b. Telnet c. DNS d. SMTP

Last Answer : c. DNS

The target hardware address on an Ethernet is _______ in an ARP request. A) 0x000000000000 B) 0.0.0.0 C) variable D) class dependent

Description : The target hardware address on an Ethernet is _______ in an ARP request. A) 0x000000000000 B) 0.0.0.0 C) variable D) class dependent

Last Answer : 0x000000000000

A 4 byte IP address consists of __________ a. only network address b. only host address c. network address & host address d. network address & MAC address

Description : A 4 byte IP address consists of __________ a. only network address b. only host address c. network address & host address d. network address & MAC address

Last Answer : c. network address & host address

The most basic function of ifconfig command is assigning the …………….. Address. A. Physical address B. Hardware address C. MAC address D. IP address

Description : The most basic function of ifconfig command is assigning the …………….. Address. A. Physical address B. Hardware address C. MAC address D. IP address

Last Answer : D. IP address

To deliver a message to the correct application program running on a host, the _______ address must be consulted. A. IP B. MAC C. Port D. None of the mentioned

Description : To deliver a message to the correct application program running on a host, the _______ address must be consulted. A. IP B. MAC C. Port D. None of the mentioned

Last Answer : C. Port

One 4 byte IP address is subdivided into __________ A. only network address B. only host address C. network address & host address D. network address & MAC address

Description : One 4 byte IP address is subdivided into __________ A. only network address B. only host address C. network address & host address D. network address & MAC address

Last Answer : C. network address & host address

7.How does traceroute work? A. It uses an ICMP destination-unreachable message to elicit the name of a router. B. It sends a specially crafted IP packet to a router to locate the number of hops from the sender to the destination network. C. It uses a protocol that will be rejected by the gateway to determine the location. D. It uses the TTL value in an ICMP message to determine the number of hops from the sender to the router.

Description : 7.How does traceroute work? A. It uses an ICMP destination-unreachable message to elicit the name of a router. B. It sends a specially crafted IP packet to a router to locate the number of hops from ... the TTL value in an ICMP message to determine the number of hops from the sender to the router.

Last Answer : D. It uses the TTL value in an ICMP message to determine the number of hops from the sender to the router.

What is the number of separate protocol layers at the serial interface gateway specified by the X.25 standard? a. 4 b. 2 c. 6 d. 3 3. none of the above

Description : What is the number of separate protocol layers at the serial interface gateway specified by the X.25 standard? a. 4 b. 2 c. 6 d. 3 3. none of the above

Last Answer : 3

A browser uses the DNS system to convert a domain name into an ip address. But once it has the the ip address how does it know where the server is located and reach the server to download the site?

Description : A browser uses the DNS system to convert a domain name into an ip address. But once it has the the ip address how does it know where the server is located and reach the server to download the site?

Last Answer : The point of an ip address is that each one is unique. It’s not unlike an address on an envelope. How does the mail know where to go? There is only one possibility.

DNS can obtain the ................. of host if its domain name is known and vice versa. A) Station address B) IP address C) Port address D) Checksum

Description : DNS can obtain the ................. of host if its domain name is known and vice versa. A) Station address B) IP address C) Port address D) Checksum

Last Answer : B) IP address

DNS can obtain the ..................of host if its domain name is known and vice versa. A) Station address B) IP address C) Port address D) Checksum

Description : DNS can obtain the ..................of host if its domain name is known and vice versa. A) Station address B) IP address C) Port address D) Checksum

Last Answer : B) IP address

Which DNS client maps an address to a name or a name to an address especially when required by a host? a. Resolver b. Mapper c. Primary Server d. Secondary Server

Description : Which DNS client maps an address to a name or a name to an address especially when required by a host? a. Resolver b. Mapper c. Primary Server d. Secondary Server

Last Answer : a. Resolver

The ____ namespace is based on a hierarchical and logical tree structure A. DNS B. Address C. table D. both a and b

Description : The ____ namespace is based on a hierarchical and logical tree structure A. DNS B. Address C. table D. both a and b

Last Answer : A. DNS

Which DNS client maps an address to a name or a name to an address especially when required by a host? A. Resolver B. Mapper C. Primary Server D. Secondary Server

Description : Which DNS client maps an address to a name or a name to an address especially when required by a host? A. Resolver B. Mapper C. Primary Server D. Secondary Server

Last Answer : A. Resolver

IP is _________ datagram protocol. A) an unreliable B) a connectionless C) botha and b D) noneof the above

Description : IP is _________ datagram protocol. A) an unreliable B) a connectionless C) botha and b D) noneof the above

Last Answer : botha and b

The IP packet that carries an IGMP packet has a value of _______ in its protocol field. A) 3 B) 2 C) 1 D) noneof the above

Description : The IP packet that carries an IGMP packet has a value of _______ in its protocol field. A) 3 B) 2 C) 1 D) noneof the above

Last Answer : 2

_______ is the protocol suite for thecurrent Internet. A) TCP/IP B) NCP C) UNIX D) ACM

Description : _______ is the protocol suite for thecurrent Internet. A) TCP/IP B) NCP C) UNIX D) ACM

Last Answer : TCP/IP