Description : In hot wire anemometer used for gas flow measurement, the wire is normally made of (A) Copper (B) Platinum (C) Constantan (D) Chromium
Last Answer : (B) Platinum
Description : Constituents of stellite are (A) Zinc, copper and nickel (B) Cobalt, chromium and tungsten (C) Zinc, aluminium and nickel (D) Nickel, cobalt and vanadium
Last Answer : (B) Cobalt, chromium and tungsten
Description : Constituents of stellite are (A) Zinc, copper & nickel (B) Cobalt, chromium & tungsten (C) Zinc, aluminium & nickel (D) Nickel, cobalt & vanadium
Last Answer : (B) Cobalt, chromium & tungsten
Description : A fuse wire is made of: (1) an alloy of tin and copper (2) an alloy of tin and lead (3) an alloy of tin and aluminium (4) an alloy of nickel and chromium
Last Answer : (2) an alloy of tin and lead Explanation: Electric fuse wire is an alloy made of tin (63 % lead 37 %. The cross sectional area determines the melting point at a certain current. Alloys (e.g. ... resulting combination of good conductivity (due to the tin) with a low melting point due to the lead).
Last Answer : an alloy of tin and lead
Description : Most conducting materials such as copper, aluminum, iron, nickel, and tungsten _____________. A. increase in resistance with increased temperature B. increase in resistance with decreased ... C. decrease in resistance with increased temperature D. increase in conductance with increased temperature
Last Answer : Answer: A
Description : Which of the following materials is not used for transmission and distribution of electrical power ? (a) Copper (b) Aluminium (c) Steel (d) Tungsten
Last Answer : (d) Tungsten
Description : Carbide tipped cutting tools are manufactured by powder metallurgy techniques and have a composition of (A) 90% tungsten carbide and 10% cobalt (B) 70% aluminium oxide & 30% silica (C) 30% nickel, 15% chromium & 55% tungsten (D) 65% tungsten & 35% zirconium
Last Answer : Option A
Description : Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten
Last Answer : (B) Nickel and chromium
Description : Principal alloying elements of cast tool alloys which have very high wear resistance & high temperature strength are (A) Cobalt, chromium & tungsten (B) Cobalt, chromium & nickel (C) Molybdenum, tungsten & chromium (D) Cobalt, zirconium & molybdenum
Last Answer : : Option A
Description : Open channel liquid flow is most conveniently measured by a (A) Hot wire anemometer (B) Notch (C) Rotameter (D) Segmental orifice
Last Answer : (B) Notch
Description : Venturimeters, orificemeters and nozzles are used to measure the fluid discharge from a pipeline. The average fluid velocity in a pipeline can be measured by a/an (A) Weir (B) Hot wire anemometer (C) Cup and vane anemometer (D) None of these
Last Answer : (B) Hot wire anemometer
Description : Hot wire anemometer is used to measure the (A) Velocity of liquids (B) Temperature of liquids (C) Velocity of gases (D) Pressure of liquids
Last Answer : (C) Velocity of gases
Description : Which of the following is used for very accurate measurement of flow of gas at low velocity? (A) Pitot tube (B) Rotameter (C) Segmental orificemeter (D) Hot wire anemometer
Last Answer : (D) Hot wire anemometer
Description : Speed of a submarine in deep sea & that of an aeroplane is measured by a/an (A) Pitot tube (B) Hot wire anemometer (C) Rotameter (D) Stroboscope
Last Answer : (A) Pitot tube
Description : The arcing contacts in a circuit breaker are made of (a) copper tungsten alloy (b) porcelain (c) electrolytic copper (d) aluminium alloy
Last Answer : (a) copper tungsten alloy
Description : Which of the following instrument can be used for measuring speed of a submarine moving in deep sea? (A) Venturimeter (B) Orifice plate (C) Hot wire anemometer (D) Pitot tube
Last Answer : Answer: Option D
Description : Hot wire anemometer is used to measure (A) Pressure in gases (B) Liquid discharge (C) Pressure in liquids (D) Gas velocities
Description : Which type of flow is measured by hot wire anemometer and describe its working principle with suitable diagram.
Last Answer : Heat transfer flowmeters this type of flowmeter measures the rise in temperature of the fluid after a known amount of heat has been added to it. Its theory is based upon the specific heat equation ... a supply so as to maintain the wire temperature constant, when the amount of heat transfer varies
Description : Explain working of 'hot wire anemometer with the help of diagram.
Last Answer : Diagram : Working: The hot-wire anemometer is a fine resistance wire heated by a current passing through it. If a cooler fluid flows past the wire, heat is removed from it by the ... and responsive to high-frequency change in flow rate. One of its main application is aerodynamic research.
Description : Stainless steel contains (A) Chromium and nickel (B) Copper (C) Aluminium (D) Vanadium
Last Answer : (A) Chromium and nickel
Description : The element used in an electric filament is (a) Copper (b) Aluminium (c) Iron (d) Tungsten
Last Answer : Ans:(d)
Description : Which of the following is a ferromagnetic material ? A. Tungsten B. Aluminium C. Copper D. Nickel (Answer)
Last Answer : D. Nickel (Answer)
Description : Which of the following is a ferromagnetic material ? (a) Tungsten (b) Aluminium (c) Copper (d) Nickel
Last Answer : (d) Nickel
Description : Which of the following material has the highest melting point (A) Copper. (B) Aluminium. (C) Tungsten. (D) Gold.
Last Answer : (C) Tungsten.
Description : Assertion : If a current is flowing through a conducting wire of non-uniform cross-section, drift speed and resistance both will increase at a section
Last Answer : Assertion : If a current is flowing through a conducting wire of non-uniform cross-section, drift ... . If Assertion is false but Reason is true.
Description : For aluminium, as compared to copper, all the following factors have higher values except (a) specific volume (6) electrical conductivity (c) co-efficient of linear expansion (d) resistance per unit length for same cross-section
Last Answer : (6) electrical conductivity
Description : Stainless steel contains which of the following? (a) Aluminium and Zinc (b) Chromium and Carbon (c) Zinc and Mercury (d) Copper and Cadmium
Last Answer : Ans:(b)
Description : Which metal is added to steel to make it stainless steel? A. Chromium (Answer) B. Aluminium C. Carbon D. Copper
Last Answer : A. Chromium (Answer)
Description : Which of the following metal is used in electroplating to make object appear shinning? a) Iron b)copper c)chromium d)aluminium
Last Answer : c)chromium
Description : Heating element of an electric heater is made up of _____? A. Tungsten B. Graphite C. Chromium 26 D. Nichrome
Last Answer : ANSWER: D
Description : Heating element of an electric heater is made up of------? A. Tungsten B. Graphite C. Chromium D. Nichrome (Answer)
Last Answer : D. Nichrome (Answer)
Description : Residual magnetism in steel for magnets is increased by the addition of (A) Nickel (B) Cobalt (C) Tungsten (D) Chromium
Last Answer : (B) Cobalt
Description : __________ can replace tungsten in high speed steel, (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum
Last Answer : (D) Molybdenum
Description : Addition of __________ in steel can help in increasing the depth of hardness. (A) Nickel (B) Chromium (C) Vanadium (D) Tungsten
Last Answer : (D) Tungsten
Description : Which of the following alloying elements is present in maximum percentage in high speed steel? (A) Molybdenum (B) Chromium (C) Tungsten (D) Vanadium
Last Answer : (C) Tungsten
Description : Addition of __________ to the steel helps in increasing the residual magnetism in steel used for making magnets. (A) Chromium (B) Nickel (C) Tungsten (D) Cobalt
Last Answer : (D) Cobalt
Description : 18-4-1 high speed steel contains 18%, 4% and 1% respectively of (A) Tungsten, vanadium and chromium (B) Tungsten, chromium and vanadium (C) Vanadium, chromium and tungsten (D) Chromium, tungsten and vanadium
Last Answer : (B) Tungsten, chromium and vanadium
Description : Addition of __________ in steel is helpful in increasing the depth of hardness. (A) Chromium (B) Sulphur (C) Vanadium (D) Tungsten
Last Answer : (A) Chromium
Description : __________ can replace tungsten in high speed steel. (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum
Last Answer : (C) Cobalt
Last Answer : (A) Molybdenum
Description : Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel. (A) Wrought (B) Tool (C) Alloy (D) Plain carbon
Last Answer : (D) Plain carbon
Description : __________ is the trade name assigned to a non-ferrous cast alloy composed of cobalt, chromium & tungsten. (A) Stellite (B) High speed steel (C) Cermet (D) Alnico
Description : Alloying elements present in Haynes stellite, which has superior performance than high speed steel, are: (A) Nickel, cobalt & chromium (B) Tungsten, chromium & cobalt (C) Manganese, chromium & cobalt (D) Tungsten, molybdenum & nickel
Last Answer : Option B
Description : A copper wire of diameter 0.16 cm is connected in series to an aluminium wire of diameter 0.25 cm. A current of 10 A is passed through them. Find (i)
Last Answer : A copper wire of diameter 0.16 cm is connected in series to an aluminium wire of diameter 0.25 cm. A ... of aluminium wire is `10^(29) m^(-3)`.
Description : Temperature of hot gases flowing in a pipe is measured by a thermocouple inserted in the thermal well. The thermal well made of __________ will facilitate the most accurate measurement of the temperature. (A) Copper (B) Steel (C) Aluminium (D) Brass
Description : Earth wire or ground wire is made of: a) copper b) aluminium c) iron d) galvanized steel
Last Answer : Ans: D
Description : Chromium molybdenum steel cannot be welded using __________ welding. (A) Thermit (B) Electrical resistance (C) Oxy-acetylene (D) Any of these