Identify type of BJT configuration having following features : (i) BJT configuration having the least current gain. (ii) KIT configuration called as voltage follower. (iii) BJT configuration having current gain less than one. (iv) BJT configuration suitable for impedance matching. (v) BIT configuration suitable for voltage amplification. (vi) BJT configuration having the least output impedance.

Identify type of BJT configuration having following features : (i) BJT configuration having the least current gain. (ii) KIT configuration called as voltage follower. (iii) BJT configuration having current gain less than one. (iv) BJT configuration suitable for impedance matching. (v) BIT configuration suitable for voltage amplification. (vi) BJT configuration having the least output impedance.  
by

1 Answer

Answer :

(i) BJT configuration having the least current gain : Common Base Configuration 

(ii) KIT configuration called as voltage follower: Common Collector Configuration 

(iii) BJT configuration having current gain less than one : Common Base Configuration 

(iv) BJT configuration suitable for impedance matching: Common Collector Configuration 

(v) BIT configuration suitable for voltage amplification: Common Emitter Configuration 

(vi) BJT configuration having the least output impedance: Common Collector Configuration
by

Related questions

Compare BJT common base configuration with common collector configuration on the basis of (i) Current gain (ii) Voltage gain (iii) Input impedance (iv) Output impedance

Description : Compare BJT common base configuration with common collector configuration on the basis of (i) Current gain (ii) Voltage gain (iii) Input impedance (iv) Output impedance

Last Answer : Parameter Common Base Common Collector Current gain Low (About 1) High (1+β) Voltage gain High 1  Input impedance  Low High Output impedance High Low

Emitter follower is used for (a) reducing the gain (b) increasing the distortion (c) impedance matching (d) none of these

Description : Emitter follower is used for (a) reducing the gain (b) increasing the distortion (c) impedance matching (d) none of these 

Last Answer : (c) impedance matching

Differentiate between positive and negative feedback on the basis of . (i) overall phase shift (ii) voltage gain (iii) stability (iv) applications

Description : Differentiate between positive and negative feedback on the basis of . (i) overall phase shift (ii) voltage gain (iii) stability (iv) applications 

Last Answer : Compare positive feedback and negative feedback on the basis of: (i) Gain (ii) Bandwidth (iii) Phase shift (iv) Stability

Which of the following instruction is of logical instructions? i) CPL A ii) JC rel iii) DA A iv) ANL A, Rn v) RR A vi) CPL bit a) i, v b) v, iii, I c) iv, ii d) v, iii, ii

Description : Which of the following instruction is of logical instructions? i) CPL A ii) JC rel iii) DA A iv) ANL A, Rn v) RR A vi) CPL bit a) i, v b) v, iii, I c) iv, ii d) v, iii, ii

Last Answer : c) iv, i

Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Description : Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Last Answer : (i) Gear Tooth : Form milling cutter, Cylindrical type or End mill type, Gear cutter. (ii) Parting off: Slitting Cutter (iii) Keyway : Staggered teeth side milling cutter, End mill cutter, key ... milling cutter. Selection of a cutter depends upon type and size of slot or groove to be produced. 

Compare pin type and suspension insulators on given points: (i) Position of insulator on cross arm. (ii) Position of conductor on insulator. (iii) Reaction on cross arm. (iv) Possibility of flash over due to large birds (v) Maintenance/Replacement cost (vi) Maximum voltage level (vii) Effect on height of supporting structure. (viii) Life

Description : Compare pin type and suspension insulators on given points: (i) Position of insulator on cross arm. (ii) Position of conductor on insulator. (iii) Reaction on cross arm. (iv) Possibility of ... Replacement cost (vi) Maximum voltage level (vii) Effect on height of supporting structure. (viii) Life 

Last Answer : S.No  Points Pin Type insulator Suspension or Disc Type insulator 1 Position of insulator on cross arm It is fixed on top of cross arm by using galvanized steel pin. So it is ... so to maintain minimum ground clearance height of pole increase.  8 Life Less More

For the complex [Fe(en)2Cl2], Cl, (en = ethylene diamine), identify (i) the oxidation number of iron, (ii) the hybrid orbitals and the shape of the complex, (iii) the magnetic behaviour of the complex, (iv) the number of geometrical isomers, (v) whether there is an optical isomer also, and (vi) name of the complex. (At. no. of Fe = 26) \ -Chemistry

Description : For the complex [Fe(en)2Cl2], Cl, (en = ethylene diamine), identify (i) the oxidation number of iron, (ii) the hybrid orbitals and the shape of the complex, (iii) the magnetic behaviour of the complex, (iv) ... an optical isomer also, and (vi) name of the complex. (At. no. of Fe = 26) \ -Chemistry

Last Answer : i) [Fe(en)2Cl2] Cl or x + 0 + 2 (-1) + (-1) = 0 x + (- 3) = 0 or x = + 3 ∴ Oxidation number of iron, x = + 3 (ii) The complex has two bidentate ligands and two ... )2Cl2] Cl, only cis-isomer shows optical isomerism. (vi) Name of complex: Dichloridobis (ethane-1, 2- diamine) Iron (III) chloride

Identify the components labelled A, B, C and D in the diagram below from the list (i) to (viii) given along withComponents : (i) Cristae of mitochondria (ii) Inner membrane of mitochondria (iii) Cytoplasm (iv) Smooth endoplasmic reticulum (v) Rough endoplasmic reticulum (vi) Mitochondrial matrix (vii) Cell vacuole (viii) Nucleus The correct components are: A B C D (a) (v) (iv) (viii) (iii) (b) (i) (iv) (viii) (vi) (c) (vi) (v) (iv) (vii) (d) (v) (i) (iii) (ii)

Description : Identify the components labelled A, B, C and D in the diagram below from the list (i) to (viii) given along with Components : (i) Cristae of mitochondria (ii) Inner membrane of mitochondria (iii) Cytoplasm (iv) Smooth endoplasmic ... viii) (vi) (c) (vi) (v) (iv) (vii) (d) (v) (i) (iii) (ii)

Last Answer : (a) (v) (iv) (viii) (iii)

Identify the sensors for the following : i) Wind speed ii) RPM of generator shaft iii) Temperature in generator iv) Cable untwisting v) Vibration vi) Wind direction

Description : Identify the sensors for the following : i) Wind speed ii) RPM of generator shaft iii) Temperature in generator iv) Cable untwisting v) Vibration vi) Wind direction

Last Answer : i) Wind Speed : Anemometer. ii) RPM of Generator Shaft: Accelerometers. iii) Temperature in Generator: Thermistor, thermocouple, RTD. iv) Cable Untwisting : Cable Twisting sensor. v) Vibration : Accelerometer, piezoelectric. vi) Wind direction: Wind vane.

An AC supply of 230 V is applied to half wave rectifier circuit. A transformer turns ratio is 20 : 1. Find i) Output DC voltage (ii) Peak Inverse Voltage (PIV)

Description : An AC supply of 230 V is applied to half wave rectifier circuit. A transformer turns ratio is 20 : 1. Find i) Output DC voltage (ii) Peak Inverse Voltage (PIV)

Last Answer : Solution:

Write type of chip formed with following factors. (i) High rake angle (ii) High cutting speed (iii) Small depth of cut (iv) Low cutting speed (v) Large depth of cut (vi) Low rake angle

Description : Write type of chip formed with following factors. (i) High rake angle (ii) High cutting speed (iii) Small depth of cut (iv) Low cutting speed (v) Large depth of cut (vi) Low rake angle

Last Answer : (i) High rake angle : Continuous chips (ii) High cutting speed : Continuous chips (iii) Small depth of cut : Continuous chips (iv) Low cutting speed :Continuous chips with built up edge (v) ... cut : Continuous chips with built up edge (vi) Low rake angle :Continuous chips with built up edge

Suggest one type of materials for water proofing for the following situations. i. Rising dampness in building ii. Leakages in dam iii. Concrete continuously in wet or damp condition iv. Leakages in lavatory ,bathroom and kitchen floor v. Cracks on plastered surface vi. Cracks on roof surface

Description : Suggest one type of materials for water proofing for the following situations. i. Rising dampness in building ii. Leakages in dam iii. Concrete continuously in wet or damp condition iv. Leakages in lavatory ,bathroom and kitchen floor v. Cracks on plastered surface vi. Cracks on roof surface

Last Answer : i. Flexible materials like butyl rubber, hot bitumen (asphalt), plastic sheets, bituminous felts, sheets of lead. ii. Liquid applied cementitious membranes iii. Liquid applied cementitious membranes ... v. Liquid applied cementitious membranes. vi. Brick bat coba, liquid applied bituminous membrane.

Check whether the following are quadratic equations: (i) (x+ 1)2=2(x-3) (ii) x – 2x = (- 2) (3-x) (iii) (x – 2) (x + 1) = (x – 1) (x + 3) (iv) (x – 3) (2x + 1) = x (x + 5) (v) (2x – 1) (x – 3) = (x + 5) (x – 1) (vi) x2 + 3x + 1 = (x – 2)2 (vii) (x + 2)3 = 2x(x2 – 1) (viii) x3 -4x2 -x + 1 = (x-2)3 -Maths 10th

Description : Check whether the following are quadratic equations: (i) (x+ 1)2=2(x-3) (ii) x - 2x = (- 2) (3-x) (iii) (x - 2) (x + 1) = (x - 1) (x + 3) (iv) (x - 3) (2x + 1) = x (x + 5) (v) (2x - 1) (x - 3) = (x ... vi) x2 + 3x + 1 = (x - 2)2 (vii) (x + 2)3 = 2x(x2 - 1) (viii) x3 -4x2 -x + 1 = (x-2)3 -Maths 10th

Last Answer : this is the correct answer!

I have some matchsticks set up like this: I + XI = X. If you do not know Roman numerals, here is a quick starter: I=1 II=2 III=3 IV=4 V=5 VI=6 VII=7 VIII=8 IX=9 X=10 XI=11 XII=12 XIII=13 XIV=14 XV=15...... Of course, I + XI = X is wrong. You are told to move the minimum number of matchsticks to make the question correct. So, how many do you have to move? -Riddles

Description : I have some matchsticks set up like this: I + XI = X. If you do not know Roman numerals, here is a quick starter: I=1 II=2 III=3 IV=4 V=5 VI=6 VII=7 VIII=8 IX=9 X=10 XI=11 ... are told to move the minimum number of matchsticks to make the question correct. So, how many do you have to move? -Riddles

Last Answer : Most people would get to one move at the least, but the real answer is zero moves. If you rotate the whole question around 180 degrees, it will display this: X = IX + I

In ΔABC and ΔDEF, AB = DE, AB || DE, BC = EF and BC || EF. Vertices A, B and C are joined to vertices D, E and F respectively (see Fig. 8.22). Show that (i) quadrilateral ABED is a parallelogram (ii) quadrilateral BEFC is a parallelogram (iii) AD || CF and AD = CF (iv) quadrilateral ACFD is a parallelogram (v) AC = DF (vi) ΔABC ≅ ΔDEF. -Maths 9th

Description : In ΔABC and ΔDEF, AB = DE, AB || DE, BC = EF and BC || EF. Vertices A, B and C are joined to vertices D, E and F respectively (see Fig. 8.22). Show that (i) quadrilateral ABED is a parallelogram ( ... CF and AD = CF (iv) quadrilateral ACFD is a parallelogram (v) AC = DF (vi) ΔABC ≅ ΔDEF. -Maths 9th

Last Answer : . Solution: (i) AB = DE and AB || DE (Given) Two opposite sides of a quadrilateral are equal and parallel to each other. Thus, quadrilateral ABED is a parallelogram (ii) Again BC = EF and BC || EF ... (Given) BC = EF (Given) AC = DF (Opposite sides of a parallelogram) , ΔABC ≅ ΔDEF [SSS congruency]

What percentage is (i) Rs 15 of Rs 120? (ii) 36 minutes of 2 hours? (iii) 8 hours of 2 days (iv) 160 metres of 4 km? (v) 175 mL of 1 litre? (vi) 25 paise of Rs 4? -Maths

Description : What percentage is (i) Rs 15 of Rs 120? (ii) 36 minutes of 2 hours? (iii) 8 hours of 2 days (iv) 160 metres of 4 km? (v) 175 mL of 1 litre? (vi) 25 paise of Rs 4? -Maths

Last Answer : answer:

Find: (i) 25% of Rs 76 (ii) 20% of Rs 132 (iii) 7.5% of 600 m (iv) 313% of 90 km (v) 8.5% of 5 kg (vi) 20% of 12 litres -Maths

Description : Find: (i) 25% of Rs 76 (ii) 20% of Rs 132 (iii) 7.5% of 600 m (iv) 313% of 90 km (v) 8.5% of 5 kg (vi) 20% of 12 litres -Maths

Last Answer : answer:

Find: (i) 32% of 425 (ii) 1623% of 16 (iii) 6.5% of 400 (iv) 136% of 70 (v) 2.8% of 35 (vi) 0.6% of 45 -Maths

Description : Find: (i) 32% of 425 (ii) 1623% of 16 (iii) 6.5% of 400 (iv) 136% of 70 (v) 2.8% of 35 (vi) 0.6% of 45 -Maths

Last Answer : answer:

Convert each of the following fraction into a percentage: (i) 47 100 (ii) 9 20 (iii) 3 8 (iv) 8 125 (v) 19 500 (vi) 4 15 (vii) 2 3 (viii) 1 3 5 -Maths

Description : Convert each of the following fraction into a percentage: (i) 47 100 (ii) 9 20 (iii) 3 8 (iv) 8 125 (v) 19 500 (vi) 4 15 (vii) 2 3 (viii) 1 3 5 -Maths

Last Answer : We have the following: (i) 47100=47100×100% = 47% (ii) 920=920×100% =9×5%= 45% (iii) 38=38×100% =3×252%=752%=3712% (iv) 8125=8125×100%=8×45%=325%=6.4% (v) ... ;203%=803%=2623% (vii) 23=23×100%=2003%=6623% (viii) 135=85=85×100%=(8×20)%=160%

Convert each of the following into a fraction: (i) 32% (ii) 614% (iii) 2623% (iv) 120% (v) 6.25% (vi) 0.8% (vii) 0.06% (viii) 22.75% -Maths

Description : Convert each of the following into a fraction: (i) 32% (ii) 614% (iii) 2623% (iv) 120% (v) 6.25% (vi) 0.8% (vii) 0.06% (viii) 22.75% -Maths

Last Answer : answer:

Evaluate each of the following: (i) (103)3 (ii) (98)3 (iii) (9.9)3 (iv) (10.4)3 (v) (598)3 (vi) (99)3 -Maths 9th

Description : Evaluate each of the following: (i) (103)3 (ii) (98)3 (iii) (9.9)3 (iv) (10.4)3 (v) (598)3 (vi) (99)3 -Maths 9th

Last Answer : answer:

Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) Mg (vi) MgO (vii) `CoCO_(3)` (viii) `CuCO_(2)` (ix)

Description : Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) Mg (vi) MgO (vii) `CoCO_(3)` (viii) `CuCO_(2)` (ix)

Last Answer : Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) ... ) `CoCO_(3)` (viii) `CuCO_(2)` (ix) `SrCO_(3)`

Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

Description : Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

Last Answer : Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

(i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2)S` (vi) `AsH_(3)` (vii) `SbH_(3)` (viii) `H_(2)Se` (ix) `H_(2)Te` Number of mole

Description : (i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2)S` (vi) `AsH_(3)` (vii) `SbH_(3)` (viii) `H_(2)Se` (ix) `H_(2)Te` Number of mole

Last Answer : (i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2) ... lone pair of electrons on the central atom is present in pure s-orbital

Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) Mg (vi) MgO (vii) `CoCO_(3)` (viii) `CuCO_(2)` (ix)

Description : Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) Mg (vi) MgO (vii) `CoCO_(3)` (viii) `CuCO_(2)` (ix)

Last Answer : Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) ... ) `CoCO_(3)` (viii) `CuCO_(2)` (ix) `SrCO_(3)`

Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

Description : Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

Last Answer : Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

(i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2)S` (vi) `AsH_(3)` (vii) `SbH_(3)` (viii) `H_(2)Se` (ix) `H_(2)Te` Number of mole

Description : (i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2)S` (vi) `AsH_(3)` (vii) `SbH_(3)` (viii) `H_(2)Se` (ix) `H_(2)Te` Number of mole

Last Answer : (i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2) ... lone pair of electrons on the central atom is present in pure s-orbital

How many of following metals impart a characteristic colour to the Bunsen flame ? `(i) Na " " (ii) Li " " (iii) K " " (iv) Ba` `(v) Sr " " (vi) Mg " "

Description : How many of following metals impart a characteristic colour to the Bunsen flame ? `(i) Na " " (ii) Li " " (iii) K " " (iv) Ba` `(v) Sr " " (vi) Mg " "

Last Answer : How many of following metals impart a characteristic colour to the Bunsen flame ? `(i) Na " " (ii) Li " " (iii) K ... ix) `Be " " (x )Ca " " (x i)Cu`

Number of oxide orwesd among , (i) Cassiterite (ii) pyrolusite (iii) Kieserite (iv) Azurite (V) chromite (vi) siderite are.

Description : Number of oxide orwesd among , (i) Cassiterite (ii) pyrolusite (iii) Kieserite (iv) Azurite (V) chromite (vi) siderite are.

Last Answer : Number of oxide orwesd among , (i) Cassiterite (ii) pyrolusite (iii) Kieserite (iv) Azurite (V) chromite (vi) siderite are.

How many of the following are oxides ores (i) Carnalite (ii) Cuprite (iii) Cassiterite (iv) Chromite (v) Cinnabar (vi) Calamine (vii) Cerussite (Viii)

Description : How many of the following are oxides ores (i) Carnalite (ii) Cuprite (iii) Cassiterite (iv) Chromite (v) Cinnabar (vi) Calamine (vii) Cerussite (Viii)

Last Answer : How many of the following are oxides ores (i) Carnalite (ii) Cuprite (iii) Cassiterite (iv) ... (vii) Cerussite (Viii) Chalocopyrite (ix) Chalcocite

Differentiate between any five of the following. (i) Artery and vein (ii) Hard water and soft water (iii) E-mail and Snail mail (iv) Apes and monkey (v) Hydrostatics and hydrodynamics (vi) Comet and meteor (vii) Barrage and dam (viii) Electron and hole (ix) Isobars and isotopes (x) Autopsy and biopsy

Description : Differentiate between any five of the following. (i) Artery and vein (ii) Hard water and soft water (iii) E-mail and Snail mail (iv) Apes and monkey (v) Hydrostatics and hydrodynamics (vi) Comet and ... (vii) Barrage and dam (viii) Electron and hole (ix) Isobars and isotopes (x) Autopsy and biopsy

Last Answer : Answers: (i) Artery and vein: Arteries: Muscular blood vessels that carry blood away from the heart. All arteries, with the exception of the pulmonary and umbilical arteries, carry oxygenated blood ... to determine cause of death Biopsy: Removal and study of a tissue sample for diagnostic purposes

Name the quantities which are measured by the following units. (i) Newton (ii) Joule (iii) Watt (iv) Volt (v) Light year (vi) Angstrom (vii) Acre-foot (viii) Becquerel (ix) Hertz (x) Cusec

Description : Name the quantities which are measured by the following units. (i) Newton (ii) Joule (iii) Watt (iv) Volt (v) Light year (vi) Angstrom (vii) Acre-foot (viii) Becquerel (ix) Hertz (x) Cusec

Last Answer : Answers: (i) Force (ii) Work Energy (iii) Power of electricity (iv) Potential difference (v) Distance of stars and planets (vi) Length (vii) Volume (viii) Radioactivity (ix) Frequency (x) Rate of flow of water

Which quantity do the following units measure: (i) Volt (ii) Coulomb (iii) Walt (iv) Ohm (v) Mho (vi) Ampere (vii) Dyne (viii) Celsius (ix) Joule (x) Calorie

Description : Which quantity do the following units measure: (i) Volt (ii) Coulomb (iii) Walt (iv) Ohm (v) Mho (vi) Ampere (vii) Dyne (viii) Celsius (ix) Joule (x) Calorie

Last Answer : Answers: (i) Voltage (ii) Charge of Electricity (iii) Power (iv) Resistance (v) Conductivity (vi) Current (vii) Force (viii) Temperature (ix) Energy (x) Heat

Arrange the following steps to form a basic Engineering Process Model.i. Test ii. Design iii. Install iv. Specification v. Manufacture vi. Maintain a) 2, 4, 5, 1, 6, 3 b) 4, 2, 5, 1, 3, 6 c) 2, 4, 5, 1, 3, 6 d) 4, 2, 5, 1, 6, 3

Description : Arrange the following steps to form a basic Engineering  Process Model. i. Test ii. Design iii. Install iv. Specification v. Manufacture vi. Maintain a) 2, 4, 5, 1, 6, 3 b) 4, 2, 5, 1, 3, 6 c) 2, 4, 5, 1, 3, 6 d) 4, 2, 5, 1, 6, 3

Last Answer : a) 2, 4, 5, 1, 6, 3

The figure given below depicts a diagrammatic sectional view of the human female reproductive system. Which set of three parts out of I-VI have been correctly identified? I II III V VI IV (a) (II) Endometrium, (III) Infundibulum, (IV) Fimbriae (b) (III) Infundibulum, (IV) Fimbriae, (V) Cervix (c) (IV) Oviducal funnel, (V) Uterus, (VI) Cervix (d) (I) Perimetrium, (II) Myometrium, (III) Fallopian tube

Description : The figure given below depicts a diagrammatic sectional view of the human female reproductive system. Which set of three parts out of I-VI have been correctly identified? I II III V VI IV (a) (II) ... , (V) Uterus, (VI) Cervix (d) (I) Perimetrium, (II) Myometrium, (III) Fallopian tube

Last Answer : (b) (III) Infundibulum, (IV) Fimbriae, (V) Cervix

A company has to choose between two projects whose cash flows are as indicated below; Project 1: i. Investment – Rs. 15 Lakhs ii. Annual cost savings – Rs. 4 lakhs. iii. Bi-annual maintenance cost – Rs. 50,000/- iv. Reconditioning and overhaul during 5th year: 6 lakhs v. Life of the project – 8 years vi. Salvage value – Rs. 5 lakhs Project 2: vii. Investment – Rs. 14 Lakhs viii. Annual cost savings – Rs. 3.5 lakhs. ix. Annual Maintenance cost – Rs. 20,000/- x. Reconditioning and overhaul during 4th year: 5 lakhs xi. Life of the project – 8 years xii. Salvage Value- 2 lakhs Which project should the company choose? The annual discount rate is 12

Description :  A company has to choose between two projects whose cash flows are as indicated  below; Project 1:  i. Investment - Rs. 15 Lakhs ii. Annual cost savings - Rs. 4 lakhs. iii. Bi-annual ... years xii. Salvage Value- 2 lakhs Which project should the company choose? The annual discount rate is 12

Last Answer : Year Project 1 Project 2 Outgo Saving NPV Outgo Saving NPV 0 15.0 0 =-15.0 14.0 0 = -14 1 0 4.0 = (4 / (1+.12)1 = 3.571 0.2 3.5 = (3.3 / (1+.12)1 = 2.95 2 0.5 4.0 = (3.5 / (1+.12)2 = 2.79 0.2 3.5 ... (1+.12)8 = 3.43 0.2 5.5  (3.5+2) = (5.3 / (1+.12)8 = 2.14 NPV = + 2.301 @12% = + 0.15

Draw symbol of (i) Tray Dryer (ii) Plate column (iii) Packed column (iv) Jaw crusher (v) Strirrer (vi) Ball mill.

Description : Draw symbol of (i) Tray Dryer (ii) Plate column (iii) Packed column (iv) Jaw crusher (v) Strirrer (vi) Ball mill.

Last Answer : i)Tray dryer:   ii)Plate column:    iii)Packed column:   iv) Jaw crusher:   v) Stirrer:   vi) Ball mill  

Compare detonation and diesel knock on the basis of (i) Fuel Ignition Temperature (ii) Compression Ratio (iii) Speed (iv) inlet temperature (v) inlet pressure (vi) cylinder wall temperature (vii) cylinder size

Description : Compare detonation and diesel knock on the basis of (i) Fuel Ignition Temperature (ii) Compression Ratio (iii) Speed (iv) inlet temperature (v) inlet pressure (vi) cylinder wall temperature (vii) cylinder size 

Last Answer : Comparison between detonation and diesel knock: Parameter To avoid Detonation in SI Engine  To avoid Diesel knock i) Fuel Ignition Temperature High Low ii) Compression Ratio ... Cylinder wall temperature Low High viii) Cylinder size Small Large

Which of the following strings would match the regular expression: p+[3-5]*[xyz]? I. p443y Il. p6y III. 3xyz IV. p35z V. p353535x Vl. ppp5 (1) I, III and Vl only (2) IV, V and VI only (3) II, IV and V only (4) I, IV and V only

Description : Which of the following strings would match the regular expression: p+[3-5]*[xyz]? I. p443y Il. p6y III. 3xyz IV. p35z V. p353535x Vl. ppp5 (1) I, III and Vl only (2) IV, V and VI only (3) II, IV and V only (4) I, IV and V only

Last Answer : Answer: 4

Define following terms (i) Kinematic link (ii) Kinematic pair (iii) Kinematic chain (iv) Mechanism (v) Machine (vi) Inversion

Description : Define following terms (i) Kinematic link (ii) Kinematic pair (iii) Kinematic chain (iv) Mechanism (v) Machine (vi) Inversion

Last Answer : (i) Kinematic link: Each part of a machine, which moves relative to some other part, is known as a kinematic link.  (ii) Kinematic pair: The two links or elements of a machine, ... obtaining different mechanisms by fixing different links in a kinematic chain is known as inversion of the mechanism.

Perform following number system conversion : (i) (589)10 = ( )2 (ii) (101101)2 = ( )16 (iii) (413)8 = ( )2 (iv) (5AF)16 = ( )10 (v) (AC8)16 = ( )2 (vi) (106)8 = ( )10

Description : Perform following number system conversion : (i) (589)10 = ( )2 (ii) (101101)2 = ( )16 (iii) (413)8 = ( )2 (iv) (5AF)16 = ( )10 (v) (AC8)16 = ( )2 (vi) (106)8 = ( )10

Last Answer : (i) (589)10 = (1001001101)2 (ii) (101101)2 = ( 2D )16 (iii) (413)8 = (100001011 )2 (iv) (5AF)16 = (1455 )10 (v) (AC8)16 = (101011001000)2 (vi) (106)8 = (70)10

Draw output characteristics of common emitter [CE] configuration and explain active, saturation and cut-off regions in detail.

Description : Draw output characteristics of common emitter [CE] configuration and explain active, saturation and cut-off regions in detail. 

Last Answer : Characteristics of common emitter [CE] configuration Explanation :  (1) Active Region: In this region collector junction is reverse biased and emitter junction is forward biased. It is ... the transistor collector current is approximately given by VCC / RC and independent of base current. 

List configurations of BJT.

Description : List configurations of BJT. 

Last Answer : Configurations of BJT : 1) Common Base (CB) configuration 2) Common Emitter (CE) configuration 3) Common Collector (CC) configuration

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) Address Resolution Protocol (ARP) A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) ... C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only