Draw block diagram of pneumatic system showing its basic components. State the functions of control value and air actuator.

Draw block diagram of pneumatic system showing its basic components. State the functions of control value and air actuator.
by
retagged

1 Answer

Answer :

Diagram :

image

Control valve: - control and regulates the direction of flow and pressure etc.

Air actuator: - Air cylinders and motors are used to obtain the required movements of direction flow.

by

Related questions

Describe the use of Pneumatic system in daily life.

Description : Describe the use of Pneumatic system in daily life.

Last Answer : I. Automatic tyres are inflated with compressed air. II. Spray guns use compressed air for spraying paints. III. Compressed air is used in air powered tools like hammers and drills IV. It is also used in air brake system in heavy vehicles.

Differentiate between pneumatic and hydraulic system.

Description : Differentiate between pneumatic and hydraulic system. 

Last Answer : Pneumatic System Hydraulic System 1 Pneumatic system uses gas for power transmission, after compression and it is used as medium for carrying out mechanical work. ... : In industrial applications, air conditioners Applications: In petrochemical industries, oil refineries.

Draw and explain pneumatic proportional controller.

Description : Draw and explain pneumatic proportional controller.

Last Answer : Explanation : Basic : Proportional control is one in which the process input is change in direct proportion to the error(t) controls the output so that the manipulated variable and the error has proportional relation. ... the MV and SP reference value called as error Given as :  Error = SP - MV

Pneumatic Nail Guns

Description : Pneumatic Nail Guns

Last Answer : Most people prefer pneumatic nail guns or nailers over other types because of their power. A pneumatic nailer is powered by compressed air, so an air compressor is needed to operate this tool. ... these tools. Never fire them beyond the appropriate distance and keep them out of reach of children.

Draw the block diagram of basic wind energy conversion system and write function of each block.

Description : Draw the block diagram of basic wind energy conversion system and write function of each block. 

Last Answer : Block diagram of basic wind energy conversion system: OR Components of wind power plant and their functions:  1) Rotor /Blade/Aero-turbine: Blade extracts significant power from the ... stronger and smoother. Towers are supports to raise the main part of the turbine up in the air.

Draw the labeled block diagram of process control system and explain each block.

Description : Draw the labeled block diagram of process control system and explain each block.

Last Answer : Explanation - Process control system consists of process or plant, sensor, error detector, automatic Controller, actuator or control element. 1) Process or plant- process means some manufacturing sequence ... process which changes the process variable. Output of this block is denoted by u .

Draw and explain schematic of PLC based automatic car parking barrier system.

Description : Draw and explain schematic of PLC based automatic car parking barrier system.

Last Answer : Explanation: Automatic car parking system allow to park maximum numbers of car in parking zone according to size of parking zone. parking zone number of vehicle parked in parking zone is less ... available parking space then automated parking system does not allow enter next car in parking zone. 

Draw block diagram of CNC system and state function of each block.

Description : Draw block diagram of CNC system and state function of each block.

Last Answer : (i) Input Devices: These are the devices which are used to input the part program in the CNC machine. There are three commonly used input devices and these are punch tape reader, magnetic ... Unit: A monitor is used to display the programs, commands and other useful data of CNC machine. 

Draw block diagram of instrumentation system. State function.

Description : Draw block diagram of instrumentation system. State function.

Last Answer : Primary transducer: The sensor which comes in contact with the measurement medium to sense the quantity. Variable conversion element: the transducer which converts the sensor ... transmitted through suitable transmission medium to the operator or presented with the help of indicators.

Draw the block diagram of an embedded system and describe the hardware units of an embedded system.

Description : Draw the block diagram of an embedded system and describe the hardware units of an embedded system.

Last Answer : OR Explanation: The embedded system consist of different components embedded into it as follows: 1) Embedded Processor 2) Power supply , reset and Oscillator circuits 3) System timers 4) ... to store data and program. Following are types of memories used in embedded system.

Draw a neat sketch of Gating system. State the functions of any four elements.

Description : Draw a neat sketch of Gating system. State the functions of any four elements.  

Last Answer : Gating system:  1. Sprue: The circular cross section that minimizes heat loss and turbulence is sprue, and the area of it is quantified from the choke area as well as the gating ratio.  2. ... the molten metal flow from the ingate has to be proportional to the casting area's volume. 

Explain the Mechatronics system with the help of block diagram and labeled the various elements.

Description : Explain the Mechatronics system with the help of block diagram and labeled the various elements. 

Last Answer : The key elements of Mechatronics systems can be classified under following categories:  Information systems  Mechanical systems  Electrical systems  Computer systems  Sensor and actuators  ... is adjusted based on generated error and again signal is given to actuators and sensors.

Draw block diagram of practical ABS system. State its advantages.

Description : Draw block diagram of practical ABS system. State its advantages.

Last Answer : Advantages: Anti-lock braking system (ABS) guarantees stable braking characteristics on all road surfaces, hence avoids overturning of the vehicle. ABS reduces friction on wheels and road, thus increases the ... effectively, then an experienced driver on the non ABS vehicle. Diagram : 

Draw and explain general block diagram of Robotic system.

Description : Draw and explain general block diagram of Robotic system.

Last Answer : Explanation : An Industrial robot has basic parts like arm, sensor, actuators, controllers etc. There subsystem communicates among them via, interface, whose function consists basically of decoding ... form of feedback signals. This is compared with the predefined task given to the controller

State the functions of following elements: i) Diesel engine system ii) Air intake system iii) Engine exhaust system iv) Engine starting system.

Description : State the functions of following elements: i) Diesel engine system ii) Air intake system iii) Engine exhaust system iv) Engine starting system.

Last Answer : i) Diesel engine system:-  Four strokes Two strokes ii) Air intake system:- Air intake system is provided to supply air to engine cylinder for fuel combustion.  iii) Engine exhaust system ... provided to rotate the engine initially until the firing starts and engine run under its own power. 

Draw block diagram of microcontroller based pick and place Robot. List the four movements required by this Robot.

Description : Draw block diagram of microcontroller based pick and place Robot. List the four movements required by this Robot.

Last Answer : Diagram : Explanation: The robot has three axes about which motion can occur. Rotation in a clockwise or anti-clock wise direction of the unit on its base Arm extension or ... . The gripper can be opened or closed by the piston in a linear cylinder extending or retracting as.

Define sensor, signal conditioner, controller and actuator in mechatronic system.

Description : Define sensor, signal conditioner, controller and actuator in mechatronic system.

Last Answer : Sensor: - A sensor is an element in a measurements system that acquires a physical parameter and changes it into electrical signal. E.g. Bellows, Thermocouple  Signal Conditioners:- The signal ... brains of control system operation and decide the kind of action taken in response to an error

State the functions of fuel system and exhaust system of a diesel power station.

Description : State the functions of fuel system and exhaust system of a diesel power station.

Last Answer : Fuel system: It supplies fuel to engine for combustion purpose. It consists of Fuel Pump: - It supplies fuel to engine for combustion purpose. Strainer: - Are provided to remove suspended impurities and ... most of the noise. Chimney:- To exhaust gases in the atmosphere as high as possible. 

List and explain the components of a hydraulic system.

Description : List and explain the components of a hydraulic system.

Last Answer : Components Hydraulic: Hydraulic pump- Supply fluid to the components in the system. Pressure in the system develops in reaction to the load. Hence, a pump rated for 5,000 ... mechanical components and need to be removed along with other contaminants.  Seals, fittings and connections.

What are the components of system bus?

Description : What are the components of system bus? A) CPU Bus, Address Bus, Data Bus B) Memory, Control Unit, ALU C) Data Bus, Address Bus, Control Bus D) Register, PC, IR

Last Answer : What are the components of system bus? A) CPU Bus, Address Bus, Data Bus B) Memory, Control Unit, ALU C) Data Bus, Address Bus, Control Bus D) Register, PC, IR

The sequence components of current of a single-phase load connected to a 3-phase system are

Description : The sequence components of current of a single-phase load connected to a 3-phase system are (A) equal positive and negative sequence components (B) equal positive, negative and zero sequence components (C) vector sum of sequence currents is zero (D) algebraic sum of sequence currents is zero

Last Answer : The sequence components of current of a single-phase load connected to a 3-phase system are equal positive, negative and zero sequence components

What are the main components of a computer system?

Description : What are the main components of a computer system?

Last Answer : CPU,monitor, keyboard and mouse

What are the components of a power system?

Description : What are the components of a power system?

Last Answer : generator Traansformer Conductors Insulators

Draw and explain integrated duration curve used in system operation.

Description : Draw and explain integrated duration curve used in system operation. 

Last Answer : Diagram of integrated duration curve used in system operation: Explanation:  Integrated duration curve is obtained from load duration curve. It is drawn in between load on Y-axis in KW/MW and the X- ... a particular time of a day can also be shown on a curve which is called as mass curve. 

With neat circuit diagram explain working of emergency light system.

Description : With neat circuit diagram explain working of emergency light system. 

Last Answer : Emergency lighting system:  In the residential, commercial and industrial areas, the illumination system work with available AC supply. In the event of AC supply failure, partial illumination can be ... glows. In rthis way, on failure of AC supply, light is obtained from DC supply.

With a neat diagram, explain back pressure steam turbine co-generation system.

Description : With a neat diagram, explain back pressure steam turbine co-generation system.

Last Answer : Back pressure steam turbine co-generation system: In this type steam enters the turbine chamber at High Pressure and expands to Low or Medium Pressure. Enthalpy difference is used for generating power / work. ... , the overall thermal efficiency of the system could reach as much as 90 percent.

With neat diagram explain the following terms: (i) Steam turbine co-generation system (ii) Gas turbine co-generation system

Description : With neat diagram explain the following terms: (i) Steam turbine co-generation system (ii) Gas turbine co-generation system

Last Answer : (i) Steam turbine co-generation system: The two types of steam turbines most widely used are the backpressure and the extraction. Another variation of the steam turbine topping ... power. The exhaust or the extracted steam from the steam turbine provides the required thermal energy.

Pneumatic and Hydraulic system which with or without transmission elements provides motion to robot links is called ____________.  1. Motor  2. Sensor  3. Actuator  4. None of the above

Description : Pneumatic and Hydraulic system which with or without transmission elements provides motion to robot links is called ____________.  1. Motor  2. Sensor  3. Actuator  4. None of the above

Last Answer : Joints

List different components of Industrial Robot. State functions of any two.

Description : List different components of Industrial Robot. State functions of any two.

Last Answer : Components of Robots: A robot is a complex machine which may contain mechanical, electrical, pneumatic, hydraulic and microelectronic components. Essentially a robot consists of four elements ... of sensors are available nowadays including tactile proximity, ultrasonic ranging and vision sensors. 

State functions and materials for front axle. Draw proportionate diagram of front axle showing cross-section at different positions.

Description : State functions and materials for front axle. Draw proportionate diagram of front axle showing cross-section at different positions. 

Last Answer : The functions of front axle :  1) It supports the weight of front part of the vehicle. 2) It facilitates steering. 3) It absorbs shocks which are transmitted due to road surface irregularities. 4) It ... is usually a steel drop forging having 0.4 % carbon steel or 1-3 % nickel steel. 

Explain microcontroller based antilock brake system with neat block diagram.

Description : Explain microcontroller based antilock brake system with neat block diagram.

Last Answer : An ABS is a system on motor vehicles which prevents the wheels from locking while braking stopping safely is one of the most important functions a motor vehicle can perform ... valves to decrease the pressure on the braking circuit, effectively reducing the braking force on that wheel.

Describe the working of PLC based automic car park barrier system with block diagram.

Description : Describe the working of PLC based automic car park barrier system with block diagram.

Last Answer : Diagram: Explanation: * Automatic car parking system allow to park maximum numbers of car in parking zone. * According to size of parking zone. In parking zone number of vehicle ... to available parking space then automated parking system does not allow enter next car in parking zone. 

What is the function of a pneumatic actuator?

Description : What is the function of a pneumatic actuator?

Last Answer : A pneumatic actuator converts energy.The energy is used to make different types of motions.

Which type of actuator generates a good deal of power but tends to be messy? a) electric b) hydraulic c) pneumatic d) both hydraulic & pneumatic

Description : Which type of actuator generates a good deal of power but tends to be messy? a) electric b) hydraulic c) pneumatic d) both hydraulic & pneumatic

Last Answer : b) hydraulic

Which of the following is not the type of actuator?  1. Digital Actuator  2. Pneumatic Actuator  3. Hydraulic and eclectic actuator  4. None of the above

Description : Which of the following is not the type of actuator?  1. Digital Actuator  2. Pneumatic Actuator  3. Hydraulic and eclectic actuator  4. None of the above

Last Answer : 1

Differentiate between pneumatic and hydraulic actuator.

Description : Differentiate between pneumatic and hydraulic actuator.

Last Answer : Difference between pneumatic and hydraulic actuator

Compare Electronic controllers with pneumatic controllers.

Description : Compare Electronic controllers with pneumatic controllers.

Last Answer : Electronic contrllers Pneumatic controller Low power requirements High power requirements Speed of response is substantially instantaneous Speed of response is not substantially ... Difficult maintenance and test kit requirements Essay maintenance and test kit requirements

Draw basic ‘cam-follower’ diagram showing its terminology (Minimum four terms)

Description : Draw basic ‘cam-follower’ diagram showing its terminology (Minimum four terms)

Last Answer : Basic Cam Follower Profile:

What are the disadvantages of Open loop control system?

Description : What are the disadvantages of Open loop control system?

Last Answer : Open loop control system are less reliable. In open loop control system Optimization is not possible. Open loop control system are less accurate.

Describe the following energy conservation methods of lighting system. i) By replacing lamp sources ii) Using light control gears.

Description : Describe the following energy conservation methods of lighting system. i) By replacing lamp sources ii) Using light control gears.

Last Answer : Energy conservation methods of lighting system:  i) By replacing lamp sources:  Installation of energy efficient fluorescent lamps in place of Conventional fluorescent lamps. Installation of ... (HF) electronic ballasts in place of conventional ballasts which saves energy up to 35%.

A control system having unit damping factor will give

Description : A control system having unit damping factor will give  (1) Oscillatory response (2) Undamped response (3) Critically damped response (4) No response

Last Answer : 1

A differentiator is not usually used in control system, because it : -

Description : A differentiator is not usually used in control system, because it : - (A) reduces damping  (B) increases error  (C) reduces gain margin  (D) increases input noise

Last Answer : A differentiator is not usually used in control system, because it : - increases input noise

A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the

Description : A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the system (A) crosses the real axis at +0.1 (B) crosses the real axis at -0.1. (C) crosses the imaginary axis at -0.1 (D) crosses the imaginary axis at +0.1

Last Answer : A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the system crosses the real axis at -0.1.

Negative feedback in a closed-loop control system DOES NOT

Description : Negative feedback in a closed-loop control system DOES NOT (A) reduce the overall gain (B) reduce bandwidth (C) improve disturbance rejection (D) reduce sensitivity to parameter variation

Last Answer : Negative feedback in a closed-loop control system DOES NOT reduce bandwidth

What are the advantages of open loop control system?

Description : What are the advantages of open loop control system?

Last Answer : Open loop control system are simple to design. Open loop control system are generally stable.

Draw block diagram of basic electronic communication system and state the function of each block.

Description : Draw block diagram of basic electronic communication system and state the function of each block.

Last Answer : i) Input signal: - The information can be in the form of sound, picture or data coming from computer. ii) Input transducer: - it converts original information into equivalent electrical ... back to suitable form. vii) Output transducer: - It converts electrical signal into original form. 

Draw the basic block diagram of Electronic communication system. State the function of transmitter.

Description : Draw the basic block diagram of Electronic communication system. State the function of transmitter.

Last Answer : Block diagram: Transmitter The function of the transmitter is to process the electrical signal from different aspects. For example in radio broadcasting the electrical signal obtained from sound ... the message signal are done just to ease the transmission of the signal through the channel.

Explain the basic components of pneumatic system with neat sketch.

Description : Explain the basic components of pneumatic system with neat sketch.

Last Answer : Ans:- Gas based system is called pneumatic system. A pneumatic system uses compressed air as medium. It consist of element like compressor , reservior , control valve cylinder piston and motor. ... and motor. 5. The control valve operates the cylinder -piston as per load requirement. 

Explain fuel system and air intake system in diesel electric power plant.

Description : Explain fuel system and air intake system in diesel electric power plant.

Last Answer : Fuel system and air intake system in diesel electric power plant :  Fuel system: It consists of storage tank, strainers, fuel transfer pump and all day fuel tank. The fuel oil is supplied ... Filters are provided to remove dust particles from air which may act as abrasive in the engine cylinder.

Air blast circuit breakers for 400 kV power system are designed to operate in?

Last Answer : Air blast circuit breakers for 400 kV power system are designed to operate in 50 millisecond.