Sketch output characteristics of CE configuration. Show all the regions.

Sketch output characteristics of CE configuration. Show all the regions.
by
retagged

1 Answer

Answer :

Sketch output characteristics of CE configuration. Show all the regions.

image

by

Related questions

Compare between CB , CE & CC transistor configuration.

Description : Compare between CB , CE & CC transistor configuration.

Last Answer : Parameter CB CE CC I/P impedance Low Or 50Ω Medium Or 600Ωto 4kΩ High Or 1 MΩ Current Gain Less than or equal to 1 High Highest Voltage Gain Medium Medium Less ... k Ω to 50 k Ω Low Or 50 Ω Phase shift between input and output 0° 360° 0° 

Draw O/P characteristics of CB configuration and explain its working.

Description : Draw O/P characteristics of CB configuration and explain its working.

Last Answer : In common base configuration, emitter is the input terminal, collector is the output terminal and base terminal is connected as a common terminal for both input and output. The base-emitter ... In this region, a small collector current flows called leakage current when emitter current is zero.

Single stage CE amplifier

Description : Single stage CE amplifier

Last Answer : Requirement(Necessity) of Multistage amplifier: -In many applications we required a high gain. But sometimes gain produced by an amplifier is not sufficient so to increase the gain, we ... necessity of multistage amplifier is for providing high gain. It is also required for high bandwidth.

Draw full bridge & half bridge configuration with common cathode.

Description : Draw full bridge & half bridge configuration with common cathode.

Last Answer : Half Bridge Configuration: Full Bridge Configuration: 

Why common emitter configuration is commonly used?

Description : Why common emitter configuration is commonly used?

Last Answer : Common emitter configuration is commonly used for amplifications because 1. The common emitter configuration (CE) provides maximum voltage and current gain and hence provides maximum power gain. The ... automatic impedance matching maximum power transfer will take place from one stage to other.

Which configuration has the lowest current gain ?

Description : Which configuration has the lowest current gain ?

Last Answer : Common base configuration has the lowest current gain.

Explain MOSFET gate drive circuit and totem pole configuration.

Description : Explain MOSFET gate drive circuit and totem pole configuration.

Last Answer : MOSFET gate drive circuit: The turning on and turning off of MOSFET can be controlled from gate to source voltage signal. If the gate to source voltage of MOSFET exceeds threshold ... this configuration, the two switches (transistors) are used in totem pole arrangement with a comparator.

Draw the output characteristics of BJT in CE configuration and label various regions on it.

Description : Draw the output characteristics of BJT in CE configuration and label various regions on it.

Last Answer :  output characteristics of BJT in CE configuration 

Draw output characteristics of common emitter [CE] configuration and explain active, saturation and cut-off regions in detail.

Description : Draw output characteristics of common emitter [CE] configuration and explain active, saturation and cut-off regions in detail. 

Last Answer : Characteristics of common emitter [CE] configuration Explanation :  (1) Active Region: In this region collector junction is reverse biased and emitter junction is forward biased. It is ... the transistor collector current is approximately given by VCC / RC and independent of base current. 

Draw: (i) Input characteristics of transistor in CE mode. (ii) Output characteristics of transistor in CE mode and show different regions on it.

Description : Draw: (i) Input characteristics of transistor in CE mode. (ii) Output characteristics of transistor in CE mode and show different regions on it.

Last Answer : (i) Input characteristics of transistor in CE mode.   (ii) Output characteristics of transistor in CE mode and show different regions on it.  

Draw the input and output characteristics of CE configuration.

Description : Draw the input and output characteristics of CE configuration.

Last Answer : Input characteristics of CE configuration: Output characteristics of CE configuration:

Sketch pin configuration of IC 723. State functions of each pin. Sketch circuit diagram for obtaining 6V output d.c. regulated voltage using IC 723.

Description : Sketch pin configuration of IC 723. State functions of each pin. Sketch circuit diagram for obtaining 6V output d.c. regulated voltage using IC 723.

Last Answer : 1) Pin configuration of IC 723 :  2) Functions of each pin:-  V+ and V-: These are the supply voltage terminals of the IC. V+ is the positive terminal and V- is the negative terminal.  Non ... Expression Vout = Vref * (R2 / R1+R2)  Assume any value of R2, R1 can be calculated. 

What is CB, CE and CC configuration ?

Description : What is CB, CE and CC configuration ?

Last Answer : Buffer : A device or a circuit used to isolate two pt'ne circuits or stages. The emitter follows is a example of buffer. Alpha = IC / IE Beta = IC / IB

(i) Discuss ideal and practical voltage source (ii) Compare CB, CC and CE configuration

Description : (i) Discuss ideal and practical voltage source (ii) Compare CB, CC and CE configuration

Last Answer : (i) Discuss ideal and practical voltage source Ideal voltage source The ideal voltage source has a constant voltage across its terminal, irrespective of the current drawn from the source. Ideal Voltage Source have zero ... to reduce. (ii) Compare CB, CC and CE configuration

Sketch constructional diagram of LED and state its three applications.

Description : Sketch constructional diagram of LED and state its three applications.

Last Answer : Applications of LED: .Infra-red LEDs are used in burglar alarm systems. · For solid state video displays which are rapidly replacing CRT. · An image sensing circuit for picture phones. · In array of different types for displaying alpha-numeric characters. · Displays.

Sketch construction of N-channel JFET and explain its operating principle.

Description : Sketch construction of N-channel JFET and explain its operating principle.

Last Answer : Construction of N-channel JFET: Working of N channel FET: a)when VGS is zero,ID flows because of VDS b)Now when VGS increases towards negative, depletion layer also increases on both sides. c)so VGS control drain current ID d)so it is called as field effect Transistor

Sketch block diagram of an unregulated power supply and explain function of each block.

Description : Sketch block diagram of an unregulated power supply and explain function of each block.

Last Answer : Block diagram of regulated DC power supply:-  Explanation 1)Transformer 2) Rectifier 3) Filter 4) Voltage regulator. 1. Transformer:- Transformer can be step up ... a voltage regulator. Output of the regulator circuit will be constant voltage under all operating circumstances.

Sketch circuit diagram of positive biased clipper using diode and explain its working.

Description : Sketch circuit diagram of positive biased clipper using diode and explain its working.

Last Answer : Positive Series Clipper with positive Vr. The following figure represents the circuit diagram for positive series clipper when the reference voltage applied is positive. During the positive cycle ... Hence the input signal that is greater than the reference voltage, appears at the output.

Sketch symbol of NAND gate and NOR gate.

Description : Sketch symbol of NAND gate and NOR gate.

Last Answer : Symbol of NAND gate and NOR gate

With the help of N-channel JFET describe the effect of input voltage VGS on output current ID.

Description : With the help of N-channel JFET describe the effect of input voltage VGS on output current ID.

Last Answer : Working of N channel FET: * When a voltage is applied between the drain and source with a DC supply (VDD), the electrons flows from source to drain through narrow channel ... where the channel gets completely blocked and the drain current becomes zero is called pinch- off voltage. 

Explain spherical configuration with sketch.

Description : Explain spherical configuration with sketch.

Last Answer : Spherical configuration  Spherical Configuration: - It uses telescopic arm that can be raised or lowered about a horizontal pivot point. The pivot point is mounted on a rotating base and gives the ... joints provide the robot with the ability to move its arm within a spherical envelope.

Explain cylindrical configuration with neat sketch

Description : Explain cylindrical configuration with neat sketch

Last Answer : Cylindrical Configuration:- These uses a vertical column and a slide that can be moved up and down along the column. The robot arm is attached to the slide so that it can be moved radially with ... column. By rotting the column the robot is capable of retrieving a cylindrical work envelope.

ABC is an isosceles triangle with AB = AC and BD, CE are its two medians. Show that BD = CE. -Maths 9th

Description : ABC is an isosceles triangle with AB = AC and BD, CE are its two medians. Show that BD = CE. -Maths 9th

Last Answer : Given ΔABC is an isosceles triangle in which AB = AC and BD, CE are its two medians. To show BD = CE.

ABC is an isosceles triangle with AB = AC and BD, CE are its two medians. Show that BD = CE. -Maths 9th

Description : ABC is an isosceles triangle with AB = AC and BD, CE are its two medians. Show that BD = CE. -Maths 9th

Last Answer : Given ΔABC is an isosceles triangle in which AB = AC and BD, CE are its two medians. To show BD = CE.

The sine and cosine curves intersect infinitely many times , bounding regions of equal areas . Sketch one of these regions and find its area .

Description : The sine and cosine curves intersect infinitely many times , bounding regions of equal areas . Sketch one of these regions and find its area .

Last Answer : The sine and cosine curves intersect infinitely many times , bounding regions of equal areas . Sketch one of these ... ` C. `3 sqrt2` D. `4 sqrt2`

The advantage of using the illustrated circuit configuration is _________. EL-0045 A. high input resistance B. high current gain C. the best stability with an increase in temperature D. the input and output are 180 degrees out of phase

Description : The advantage of using the illustrated circuit configuration is _________. EL-0045 A. high input resistance B. high current gain C. the best stability with an increase in temperature D. the input and output are 180 degrees out of phase

Last Answer : Answer: C

Which transistor configuration provides a phase reversal between the input and output signals?

Description : Which transistor configuration provides a phase reversal between the input and output signals?

Last Answer : Common emitter.

select the correct response from the choices given in the parentheses. Q-20. In a closed-loop configuration the output signal is determined by (the input signal, the feedback signal, both).

Description : select the correct response from the choices given in the parentheses. Q-20. In a closed-loop configuration the output signal is determined by (the input signal, the feedback signal, both).

Last Answer : Both the input signal and the feedback signal.

Identify type of BJT configuration having following features : (i) BJT configuration having the least current gain. (ii) KIT configuration called as voltage follower. (iii) BJT configuration having current gain less than one. (iv) BJT configuration suitable for impedance matching. (v) BIT configuration suitable for voltage amplification. (vi) BJT configuration having the least output impedance.

Description : Identify type of BJT configuration having following features : (i) BJT configuration having the least current gain. (ii) KIT configuration called as voltage follower. (iii) BJT ... configuration suitable for voltage amplification. (vi) BJT configuration having the least output impedance.  

Last Answer : (i) BJT configuration having the least current gain : Common Base Configuration  (ii) KIT configuration called as voltage follower: Common Collector Configuration  (iii) BJT ... Emitter Configuration  (vi) BJT configuration having the least output impedance: Common Collector Configuration

Compare BJT common base configuration with common collector configuration on the basis of (i) Current gain (ii) Voltage gain (iii) Input impedance (iv) Output impedance

Description : Compare BJT common base configuration with common collector configuration on the basis of (i) Current gain (ii) Voltage gain (iii) Input impedance (iv) Output impedance

Last Answer : Parameter Common Base Common Collector Current gain Low (About 1) High (1+β) Voltage gain High 1  Input impedance  Low High Output impedance High Low

The transistor configuration to connect 4 W speaker with 600 W output impedance audio

Description : The transistor configuration to connect 4 W speaker with 600 W output impedance audio amplifier is • Common Emitter • Common Base • Common Collector • None of the above.

Last Answer : The transistor configuration to connect 4 W speaker with 600 W output impedance audio amplifier is Common Collector

Among the three configuration the highest output impedance is obtained by

Last Answer : Among the three configuration, the highest output impedance is obtained by CB.

The characteristics of the Mediterranean climate regions are- 

Description : The characteristics of the Mediterranean climate regions are- 

Last Answer : Identify the incorrect factor: The characteristics of the Mediterranean climate regions are- (a) mild, moist ... (c) drizzle (d) foggy coasts

The characteristics of the China type climate regions are- 

Description : The characteristics of the China type climate regions are- 

Last Answer : Identify the incorrect factor: The characteristics of the China type climate regions are- (a) frost ... 10°C (d) winter temperature 0°C to 18°C

In ice sheet regions the characteristics of climate is- 

Description : In ice sheet regions the characteristics of climate is- 

Last Answer : Identify the incorrect factor: In ice sheet regions the characteristics of climate is- ... precipitation exceeds evaporation (d) winter rainfall

The characteristics of the climate in tropical desert regions are- 

Description : The characteristics of the climate in tropical desert regions are- 

Last Answer : Identify the incorrect factor: The characteristics of the climate in tropical desert regions are- (a) ... less than 200 mm (d) windy conditions

What human characteristics does cuba share with nearby regions and contries?

Description : What human characteristics does cuba share with nearby regions and contries?

Last Answer : Need answer

A culture can be divided into subcultures according to A)personality characteristics. B)the motives that people have for their behaviour. C)geographic regions or human characteristics, such as age or ethnic background. D)geographic regions and income levels. E)the information to which consumers allow themselves to be exposed.

Description : A culture can be divided into subcultures according to A)personality characteristics. B)the motives that people have for their behaviour. C)geographic regions or human characteristics, such as age ... regions and income levels. E)the information to which consumers allow themselves to be exposed.

Last Answer : C)geographic regions or human characteristics, such as age or ethnic background

Draw the characteristics of tunnel diode, showing operating regions. State two applications of tunnel diode.

Description : Draw the characteristics of tunnel diode, showing operating regions. State two applications of tunnel diode.

Last Answer : Applications: One of the important application of a tunnel diode is in high speed computers where the switching times in the order of nanoseconds or picoseconds are desirable. A tunnel diode can be ... In digital networks. 2. As a high speed switch. 3. As a high frequency oscillator.

Define Transistor. State its type.

Description : Define Transistor. State its type.

Last Answer : Transistors are active electronic components made of semiconducting materials, which can amplify the electric signals by the application of a small input signal. Types of transistors: 1. Unipolar Junction Transistors 2. Bipolar Junction Transistors

Draw the symbol of photodiode.

Description : Draw the symbol of photodiode.

Last Answer : Symbol of photodiode.

Explain with circuit diagram, voltage divider biasing method and state its two advantages.

Description : Explain with circuit diagram, voltage divider biasing method and state its two advantages.

Last Answer : a)Here R1 and R2 forms voltage divider biasing arrangement. b)voltage drop across R2 ,forward biases the base emitter junction. c)so base current flows and hence collector ... Operating point stabilized against shift in temperature. · Operating point is almost independent of β variation

Draw circuit diagram for π filter and explain its working with waveforms.

Description : Draw circuit diagram for π filter and explain its working with waveforms.

Last Answer : Working of a Pi filter: In this circuit, we have a capacitor in parallel, then an inductor in series, followed by another capacitor in parallel. Capacitor C1 − This filter capacitor ... any ac component present in the signal to pass through it, which the inductor has failed to block.

State advantages of MOSFET over JFET.

Description : State advantages of MOSFET over JFET.

Last Answer : ➨It can be operated in either enhancement mode or depletion mode. ➨MOSFET have much higher input impedance compare to JFET. ➨They have high drain resistance due to lower resistance of channel. ➨It is easy to manufacture. ➨They support high speed of operation compare to JFETs.

State any four applications of regulated DC power supply.

Description : State any four applications of regulated DC power supply.

Last Answer : * Amplifiers * Mobile Phone power adaptors * Regulated power supplies in appliances * Various oscillators

Define with respect to FET:- (i) Static drain resistance (ii) Dynamic resistance (iii) Trans conductance (iv) Pinch-off voltage

Description : Define with respect to FET:- (i) Static drain resistance (ii) Dynamic resistance (iii) Trans conductance (iv) Pinch-off voltage

Last Answer : (i) Static drain resistance- It is the ratio of drain source voltage (ΔVDS) to the drain current (ID) at constant gate-source voltage. It can be expressed as, Rd = (VDS)/(ID) at ... of charge carrier and the value of drain current reaches its constant saturation value is called pinch off voltage.

Define following parameter of rectifier: (i) Ripple factor (ii) Efficiency (iii) Peak Inverse Voltage (iv) Transformer utilization factor

Description : Define following parameter of rectifier: (i) Ripple factor (ii) Efficiency (iii) Peak Inverse Voltage (iv) Transformer utilization factor

Last Answer : (i) Ripple Factor - Ripple factor (γ) may be defined as the ratio of the root mean square (rms) value of the ripple voltage to the absolute value of the DC component of the ... the same rectifier. Effective VA Rating of transformer is the average of primary and secondary VA rating of transformer.

Derive the relationship between α and β of a transistor.

Description : Derive the relationship between α and β of a transistor.

Last Answer : Relationship between α and β of a transistor :

State the applications and specification of (i) Resistor (ii) Capacitor (iii)Inductor

Description : State the applications and specification of (i) Resistor (ii) Capacitor (iii)Inductor

Last Answer : Application of resistor: 1.Resistors are used in high frequency instrument. 2.Resistor is used in power control circuit. 3.It is used in DC power supplies. 4.Resistors are used ... DC Current  3.Electromagnetic Interference (EMI)  4.Magnetic Saturation Flux Density  5.Curie Temperature 

Draw the block diagram of regulated power supply, explain function of each block and draw waveforms of each stage.

Description : Draw the block diagram of regulated power supply, explain function of each block and draw waveforms of each stage.

Last Answer : 1. A step down transformer 2. A rectifier 3. A filter 4. A regulator Operation of Regulated Power Supply:- Step Down Transformer:- A step down transformer will ... regulator. A regulator will maintain the output constant even when changes at the input or any other changes occur.