What is the usualnumber of bits transmitted simultaneously inparalleldata transmission used by microcomputers? A. 16 B. 9 C. 8 D. 4 E. None of the above

What is the usualnumber of bits transmitted simultaneously inparalleldata transmission used by microcomputers?
A.
16
B.
9
C.
8
D.
4
E.
None of the above
by

1 Answer

Answer :

9
by

Related questions

How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

Avalanche photodiode receivers can detect bits of transmitted data by receiving a. 100 photons b. 200 photons c. 2000 photons d. 300 photons

Description : Avalanche photodiode receivers can detect bits of transmitted data by receiving a. 100 photons b. 200 photons c. 2000 photons d. 300 photons

Last Answer : 200 photons

The _____ layer uses data compression to reduce the number of bits to be transmitted. a. presentation b. network c. data link d. application

Description : The _____ layer uses data compression to reduce the number of bits to be transmitted. a. presentation b. network c. data link d. application

Last Answer : a. presentation

If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS

Description : If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS

Last Answer : c. 32 Kbps

Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec

Description : Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec

Last Answer : a. 2 sec

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

In which transmission are sound and video signals transmitted simultaneously?

Description : In which transmission are sound and video signals transmitted simultaneously?

Last Answer : – T.V. Transmission

In which transmission are sound and video signals transmitted simultaneously?

Description : In which transmission are sound and video signals transmitted simultaneously?

Last Answer : T.V. Transmission

The VPIof an NNI is _______ bits in length. A) 8 B) 12 C) 16 D) 24

Description : The VPIof an NNI is _______ bits in length. A) 8 B) 12 C) 16 D) 24

Last Answer : 12

The VPIof a UNI is _______ bits in length. A) 8 B) 12 C) 16 D) 24

Description : The VPIof a UNI is _______ bits in length. A) 8 B) 12 C) 16 D) 24

Last Answer : 8

How many bits internet address isassigned to eachhost on a TCP/IP internet which is used in all communications withthehost? A. 16 - bits B. 32 - bits C. 48 - bits D. 64 - bits E. None of the above

Description : How many bits internet address isassigned to eachhost on a TCP/IP internet which is used in all communications withthehost? A. 16 - bits B. 32 - bits C. 48 - bits D. 64 - bits E. None of the above

Last Answer : 32 - bits

In_________ transmission, we send bits oneafter another without startor stop bits or gaps. It is the responsibilityof the receiver togroup the bits. A) synchronous B) asynchronous C) isochronous D) none of the abov

Description : In_________ transmission, we send bits oneafter another without startor stop bits or gaps. It is the responsibilityof the receiver togroup the bits. A) synchronous B) asynchronous C) isochronous D) none of the abov

Last Answer : synchronous

In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Last Answer : asynchronous

What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) Baud C) Bits per second D) Both B and C

Description : What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) Baud C) Bits per second D) Both B and C

Last Answer : B) Baud

When 2 or more bits in a data unit has been changed during the transmission, the error is called _____ a. random error b. burst error c. inverted error d. double error

Description : When 2 or more bits in a data unit has been changed during the transmission, the error is called _____ a. random error b. burst error c. inverted error d. double error

Last Answer : b. burst error

When 2 or more bits in a data unit has been changed during the transmission, the error is called ____________ A. random error B. burst error C. inverted error D. double error

Description : When 2 or more bits in a data unit has been changed during the transmission, the error is called ____________ A. random error B. burst error C. inverted error D. double error

Last Answer : B. burst error

If in a computer, 16 bits are used to specify address in a RAM, the number of addresses will be a. 216 b. 65,536 c. 64K d. Any of the above

Description : If in a computer, 16 bits are used to specify address in a RAM, the number of addresses will be a. 216 b. 65,536 c. 64K d. Any of the above

Last Answer : 65,536

In Go-Back-N ARQ, if 5 is the number of bits for thesequencenumber, then the maximum size of the receive window mustbe _____ A) 15 B) 16 C) 31 D) 1

Description : In Go-Back-N ARQ, if 5 is the number of bits for thesequencenumber, then the maximum size of the receive window mustbe _____ A) 15 B) 16 C) 31 D) 1

Last Answer : 1

In Go-Back-N ARQ, if 5 is the number of bits for thesequencenumber, then the maximum size of the send window must be _____ A) 15 B) 16 C) 31 D) 1

Description : In Go-Back-N ARQ, if 5 is the number of bits for thesequencenumber, then the maximum size of the send window must be _____ A) 15 B) 16 C) 31 D) 1

Last Answer : 31

. In addresses for _______ networks, the first 16 bits specify a particular network, and the last 16 bits specify a particular host. A. class A B. class C C. class B D. class D

Description : . In addresses for _______ networks, the first 16 bits specify a particular network, and the last 16 bits specify a particular host. A. class A B. class C C. class B D. class D

Last Answer : C. class B

The Internet addresses are ______ bits in length in IPV4 addressing scheme A. 16 B. 64 C. 32 D. 48

Description : The Internet addresses are ______ bits in length in IPV4 addressing scheme A. 16 B. 64 C. 32 D. 48

Last Answer : C. 32

The Internet addresses are ……….. bits in length in IPV4 addressing scheme a. 16 b. 64 c. 48 d. 32

Description : The Internet addresses are ……….. bits in length in IPV4 addressing scheme a. 16 b. 64 c. 48 d. 32

Last Answer : d. 32

Two, trains, one from Howrah to Patna and the other from Patna to Howrah, start simultaneously. After they meet, the trains reach their destinations after 9 hours and 16 hours respectively. The ratio of their speeds is: A. 1: 2 B. 4 : 3 C. 7 : 8 D. 3 : 4 E. none of these

Description : Two, trains, one from Howrah to Patna and the other from Patna to Howrah, start simultaneously. After they meet, the trains reach their destinations after 9 hours and 16 hours respectively. The ratio of their speeds is: A. 1: 2 B. 4 : 3 C. 7 : 8 D. 3 : 4 E. none of these

Last Answer : Answer- B (4:3) Explanation: Let us name the trains as A and B. Then, trick formula (A’s speed) : (B’s speed) = square root of b : square-root of a =square-root of 16 : square-root of 9 = 4 : 3.

Number of bits per symbol used in Baudot code is a. 7 b. 5 c. 8d. 9

Description : Number of bits per symbol used in Baudot code is a. 7 b. 5 c. 8 d. 9

Last Answer : 5

Which type of computers uses the 8-bit code called EBCDIC? A) Minicomputers B) Microcomputers C) Mainframe computers D) Super computer

Description : Which type of computers uses the 8-bit code called EBCDIC? A) Minicomputers B) Microcomputers C) Mainframe computers D) Super computer

Last Answer : Answer : C

Which type of computers uses the 8-bit code called EBCDIC? a. Minicomputers b. Microcomputers c. Mainframe computers d. Super computer

Description : Which type of computers uses the 8-bit code called EBCDIC? a. Minicomputers b. Microcomputers c. Mainframe computers d. Super computer

Last Answer : c. Mainframe computers

Which type of computers uses the 8-bit code called EBCDIC? a. Minicomputers b. Microcomputers c. Mainframe compu

Description : Which type of computers uses the 8-bit code called EBCDIC? a. Minicomputers b. Microcomputers c. Mainframe computer

Last Answer : c. Mainframe computer

An IPv4 address consistsof _______ bits. A) 4 B) 8 C) 32 D) 64

Description : An IPv4 address consistsof _______ bits. A) 4 B) 8 C) 32 D) 64

Last Answer : 32

A 8-Mbps tokenring has atoken holding timer value of 10 msec. What is the longest frame (assumeheader bits are negligible) that canbe sent on this ring? A. 8000 B frame B. 80,000 B frame C. 8 x 105 bit frame D. 10,000 B frame

Description : A 8-Mbps tokenring has atoken holding timer value of 10 msec. What is the longest frame (assumeheader bits are negligible) that canbe sent on this ring? A. 8000 B frame B. 80,000 B frame C. 8 x 105 bit frame D. 10,000 B frame

Last Answer : 10,000 B frame

A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network? a. 2 Mbps b. 60 Mbps c. 120 Mbps

Description : A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network? a. 2 Mbps b. 60 Mbps c. 120 Mbps

Last Answer : a. 2 Mbps

What is the default mask for class B in CIDR notation? A) /9 B) /8 C) /16 D) none of the above

Description : What is the default mask for class B in CIDR notation? A) /9 B) /8 C) /16 D) none of the above

Last Answer : (C) /16

What is the default mask for class A in CIDR notation? A) /9 B) /8 C) /16 D) none of the above

Description : What is the default mask for class A in CIDR notation? A) /9 B) /8 C) /16 D) none of the above

Last Answer : /8

All bits in character are sent and received ______ in serial port. A. In groups of 3 bits B. One at a time C. In groups of 2 bits D. Simultaneously

Description : All bits in character are sent and received ______ in serial port. A. In groups of 3 bits B. One at a time C. In groups of 2 bits D. Simultaneously

Last Answer : B. One at a time

When a wide band of frequencies is transmitted simultaneously, each frequency will vary in the amount of fading. What is this variable fading called?

Description : When a wide band of frequencies is transmitted simultaneously, each frequency will vary in the amount of fading. What is this variable fading called?

Last Answer : Selective fading.

The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Description : The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Last Answer : they contain clock recovery circuits

The cheapest modems cantransmit A. 300 bits per second B. 1,200 bitsper second C. 2,400 bits per second D. 4,800 bits per second E. None of the above

Description : The cheapest modems cantransmit A. 300 bits per second B. 1,200 bitsper second C. 2,400 bits per second D. 4,800 bits per second E. None of the above

Last Answer : 300 bits per second

Usually, it takes10-bits to represent one character. How many characters can betransmittedat a speed of 1200 BPS? A. 10 B. 12 C. 120 D. 1200 E. None of the above

Description : Usually, it takes10-bits to represent one character. How many characters can betransmittedat a speed of 1200 BPS? A. 10 B. 12 C. 120 D. 1200 E. None of the above

Last Answer : 120

The synchronous modems are more costly than the asynchronous modemsbecause A. they produce largevolumeof data B. they contain clock recovery circuits C. they transmit thedata with stop and start bits. D. they operate witha largerbandwidth E. None of the above

Description : The synchronous modems are more costly than the asynchronous modemsbecause A. they produce largevolumeof data B. they contain clock recovery circuits C. they transmit thedata with stop and start bits. D. they operate witha largerbandwidth E. None of the above

Last Answer : they contain clock recovery circuits

address use 7 bits for the <network> and 24 bits for the <host> portion of the IP a. address. b. Class A c. Class B d. Class C e. Class D

Description : address use 7 bits for the and 24 bits for the portion of the IP a. address. b. Class A c. Class B d. Class C e. Class D

Last Answer : a. address.

An error-detectingcode inserted asa field in a blockof data tobe transmitted is known as A. Frame check sequence B. Error detecting code C. Checksum D. flow control E. None of the above

Description : An error-detectingcode inserted asa field in a blockof data tobe transmitted is known as A. Frame check sequence B. Error detecting code C. Checksum D. flow control E. None of the above

Last Answer : Frame check sequence

Avalanche photodiode receivers candetect hits of transmitted databy receiving A. 100 photons B. 200 photons C. 300 photons D. 400 photons E. None of the above

Description : Avalanche photodiode receivers candetect hits of transmitted databy receiving A. 100 photons B. 200 photons C. 300 photons D. 400 photons E. None of the above

Last Answer : 200 photons

How many characters per sec (7 bits + 1 parity ) can be transmitted over a 2400 bps line if the transfer is synchronous (1 start and 1 stop bit)?

Description : How many characters per sec (7 bits + 1 parity ) can be transmitted over a 2400 bps line if the transfer is synchronous (1 start and 1 stop bit)?

Last Answer : 1. 300 2. 240 3. 250 4. 275 Ans- 2400/(7+1+2) 240

How many characters per sec (7 bits + 1 parity) can be transmitted over a 2400 bps line if the transfer is ...

Description : How many characters per sec (7 bits + 1 parity) can be transmitted over a 2400 bps line if the transfer is synchronous (1 start bit and 1 stop bit)?  A) 300 B) 240 C) 250 D) 275

Last Answer : How many characters per sec (7 bits + 1 parity) can be transmitted over a 2400 bps line if the transfer is synchronous (1 start bit and 1 stop bit)?  300

Two tap can fill a dumper in 7 hrs and 8 hrs respectively. The taps are opened simultaneously and it is found that due to leakage in the bottom it took 16 mins more to fill the dumper. When the dumper is full, in what time will the leak empty it? A) 56hrs B) 56hrs C) 46hrs D) 36hrs

Description : Two tap can fill a dumper in 7 hrs and 8 hrs respectively. The taps are opened simultaneously and it is found that due to leakage in the bottom it took 16 mins more to fill the dumper. When the dumper is full, in what time will the leak empty it? A) 56hrs B) 56hrs C) 46hrs D) 36hrs

Last Answer : A Work done by 2 taps in 1 hr = (1/7 + 1/8) = 15/56 Time taken by these taps to fill the dumper = 56/15 hrs =3 hrs 44 mins Due to leakage, time taken = 3 hrs +44mins+16 mins =4hrs Work done by (2 ... the leak in 1 hr = (15/56 - ¼) =15 - 4/56 =1/56 Leak will empty the full cistern in 56 hrs.

How many types of microcomputers and what are they ?

Description : How many types of microcomputers and what are they ?

Last Answer : 3 types of microcomputers. Namely: palmtop , laptop , desktop.

ART (Automatic Reasoning Tool) is designed to be used on __________ a) LISP machines b) Personal computers c) Microcomputers d) All of the mentioned

Description : ART (Automatic Reasoning Tool) is designed to be used on __________ a) LISP machines b) Personal computers c) Microcomputers d) All of the mentioned

Last Answer : a) LISP machines

Which are microcomputers commonly used for commercial data processing, desktop publishing and engineering application. a. Digital computer b. Personal computer c. Both d. None of these

Description : Which are microcomputers commonly used for commercial data processing, desktop publishing and engineering application. a. Digital computer b. Personal computer c. Both d. None of these

Last Answer : b. Personal computer

Hard Disks and Diskettes are: a) Direct Access Storage Devices b) Sequential Access Storage Devices c) Rarely used Microcomputers d) None of The Above

Description : Hard Disks and Diskettes are: a) Direct Access Storage Devices b) Sequential Access Storage Devices c) Rarely used Microcomputers d) None of The Above

Last Answer : a) Direct Access Storage Devices

Data centers and centralized computing covers many and a) Microcomputers b) Minicomputers c) Mainframe computers d) Supercomputers

Description : Data centers and centralized computing covers many and a) Microcomputers b) Minicomputers c) Mainframe computers d) Supercomputers

Last Answer : Supercomputers