In _______forwarding, the routing tableholds the address of just thenext hop instead of complete routeinformation. A) next-hopB)network-specificC)host-specificD)default

In _______forwarding, the routing tableholds the address of just thenext hop instead of complete routeinformation.
A)
next-hop
B)
network-specific
C)
host-specific
D)
default
by

1 Answer

Answer :

next-hop
by

Related questions

In _______forwarding, the full IP address of a destination isgiven in the routing table. A) next-hop B) network-specific C) host-specific D) default

Description : In _______forwarding, the full IP address of a destination isgiven in the routing table. A) next-hop B) network-specific C) host-specific D) default

Last Answer : host-specific

In _______forwarding, the destinationaddress is anetworkaddress in the routingtable. A) next-hop B) network-specific C) host-specific D) default

Description : In _______forwarding, the destinationaddress is anetworkaddress in the routingtable. A) next-hop B) network-specific C) host-specific D) default

Last Answer : network-specific

In _______forwarding, the mask anddestination addresses are both 0.0.0.0 in therouting table. A) next-hop B) network-specific C) host-specific D) default

Description : In _______forwarding, the mask anddestination addresses are both 0.0.0.0 in therouting table. A) next-hop B) network-specific C) host-specific D) default

Last Answer : default

The sender is a router thathas receiveda datagram destinedfor a host on thesame network. The logical address that mustbe mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : The sender is a router thathas receiveda datagram destinedfor a host on thesame network. The logical address that mustbe mapped to a physical address is ______. A) thedestination IP address in the datagram ... IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : thedestination IP address in the datagram header

If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : the IP address of therouter found inthe routing table

The sender is a router thathas receiveda datagram destinedfor a host on anothernetwork. The logicaladdress that must be mapped to aphysical address is ______. A) thedestination IP address in the datagram headerB)the IP address of therouter found inthe routing tableC)either a or bD)noneof the above

Description : The sender is a router thathas receiveda datagram destinedfor a host on anothernetwork. The logicaladdress that must be mapped to aphysical address is ______. A) thedestination IP address in the datagram header ... address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : thedestination IP address in the datagram header

f the sender is a host and wants tosend a packet toanotherhost on the samenetwork, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : f the sender is a host and wants tosend a packet toanotherhost on the samenetwork, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : hedestination IP address in the datagram header

You havea class A network address 10.0.0.0 with 40subnets,but arerequiredto add 60 new subnets very soon. You would like to still allow for the largest possible number of host IDs per subnet. Which subnet mask should youassign? A. 255.240.0.0 B. 255.248.0.0 C. 255.252.0.0 D. 255.254.0.0 E. 255.255.255.255

Description : You havea class A network address 10.0.0.0 with 40subnets,but arerequiredto add 60 new subnets very soon. You would like to still allow for the largest possible number of host IDs per subnet. Which subnet mask should youassign? A. ... B. 255.248.0.0 C. 255.252.0.0 D. 255.254.0.0 E. 255.255.255.255

Last Answer : 255.254.0.0

address use 7 bits for the <network> and 24 bits for the <host> portion of the IP a. address. b. Class A c. Class B d. Class C e. Class D

Description : address use 7 bits for the and 24 bits for the portion of the IP a. address. b. Class A c. Class B d. Class C e. Class D

Last Answer : a. address.

In the network 200.10.11.144/27, the fourth octet (in decimal) of the last IP address of the network which can be assigned to a host is ________ a. 158 b. 255 c. 222 d. 223

Description : In the network 200.10.11.144/27, the fourth octet (in decimal) of the last IP address of the network which can be assigned to a host is ________ a. 158 b. 255 c. 222 d. 223

Last Answer : a. 158

A 4 byte IP address consists of __________ a. only network address b. only host address c. network address & host address d. network address & MAC address

Description : A 4 byte IP address consists of __________ a. only network address b. only host address c. network address & host address d. network address & MAC address

Last Answer : c. network address & host address

Find out the components of DHCP: 1) A protocol that delivers host-specific configuration parameters from a server to a host. 2) The client determines its own hardware address; this is normally in a ROM on the hardware. 3) A mechanism for the allocation of temporary or permanent network addresses to hosts. A. 1,2 B. 1,3 C. 2,3 D. 1,2,3

Description : Find out the components of DHCP: 1) A protocol that delivers host-specific configuration parameters from a server to a host. 2) The client determines its own hardware address; this is normally in a ROM on the hardware. 3) ... or permanent network addresses to hosts. A. 1,2 B. 1,3 C. 2,3 D. 1,2,3

Last Answer : B. 1,3

One 4 byte IP address is subdivided into __________ A. only network address B. only host address C. network address & host address D. network address & MAC address

Description : One 4 byte IP address is subdivided into __________ A. only network address B. only host address C. network address & host address D. network address & MAC address

Last Answer : C. network address & host address

In IPv6, when a datagram needs tobediscarded ina congested network, the decision is basedon the _______ field in thebase header. A) hop limit B) priority C) nextheader D) noneof the above

Description : In IPv6, when a datagram needs tobediscarded ina congested network, the decision is basedon the _______ field in thebase header. A) hop limit B) priority C) nextheader D) noneof the above

Last Answer : priority

The idea of address aggregation wasdesigned to alleviate theincreasein routing table entries when using ________. A) classful addressing B) classless addressing C) both a and b D) none of the above

Description : The idea of address aggregation wasdesigned to alleviate theincreasein routing table entries when using ________. A) classful addressing B) classless addressing C) both a and b D) none of the above

Last Answer : classless addressing

In OSI network architecture, the routing is performed by a. network layer b. data link layer c. transport layer d. session layer e. none of above

Description : In OSI network architecture, the routing is performed by a. network layer b. data link layer c. transport layer d. session layer e. none of above

Last Answer : network layer

The routing processor of arouter performs the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Description : The routing processor of arouter performs the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Last Answer : network

A station in a network forwards incoming packets byplacing them on its shortest output queue. Whatrouting algorithm is being used? A. hot potatorouting B. flooding C. static routing D. delta routing E. None of the above

Description : A station in a network forwards incoming packets byplacing them on its shortest output queue. Whatrouting algorithm is being used? A. hot potatorouting B. flooding C. static routing D. delta routing E. None of the above

Last Answer : hot potatorouting

Dynamic routing protocol enable routers to a. Dynamically discover and maintain routes b. Distribute routing updates to other routers c. Reach agreement with other routers about the network topology d. All of the above

Description : Dynamic routing protocol enable routers to a. Dynamically discover and maintain routes b. Distribute routing updates to other routers c. Reach agreement with other routers about the network topology d. All of the above

Last Answer : d. All of the above

Which of the following is not a congestion policy at network layer? a. Flow Control Policy b. Packet Discard Policy c. Packet Lifetime Management Policy d. Routing Algorithm

Description : Which of the following is not a congestion policy at network layer? a. Flow Control Policy b. Packet Discard Policy c. Packet Lifetime Management Policy d. Routing Algorithm

Last Answer : a. Flow Control Policy

Which of the following assertions is FALSE about the Internet Protocol (IP)? a. It is possible for a computer to have multiple IP addresses b. IP packets from the same source to the same destination can take different routes in the network c. IP ensures that a packet is discarded if it is unable to reach its destination within a given number of hops d. The packet source cannot set the route of an outgoing packets; the route is determined only by the routing tables in the routers on the way

Description : Which of the following assertions is FALSE about the Internet Protocol (IP)? a. It is possible for a computer to have multiple IP addresses b. IP packets from the same source to the same ... outgoing packets; the route is determined only by the routing tables in the routers on the way

Last Answer : d. The packet source cannot set the route of an outgoing packets; the route is determined only by the routing tables in the routers on the way

Which of the following routing algorithms can be used for network layer design? a. shortest path algorithm b. distance vector routing c. link state routing d. all of the mentioned

Description : Which of the following routing algorithms can be used for network layer design? a. shortest path algorithm b. distance vector routing c. link state routing d. all of the mentioned

Last Answer : d. all of the mentioned

Which one of the following is not a function of network layer? a. routing b. inter-networking c. congestion control d. error contro

Description : Which one of the following is not a function of network layer? a. routing b. inter-networking c. congestion control d. error contro

Last Answer : d. error control

In OSI network architecture, the routing is performed by a. network layer b. data link layer c. transport layer d. session layer

Description : In OSI network architecture, the routing is performed by a. network layer b. data link layer c. transport layer d. session layer

Last Answer : a. network layer

Physical or logical arrangement of network is __________ a) Topology b) Routing c) Networking d) Control

Description : Physical or logical arrangement of network is __________ a) Topology b) Routing c) Networking d) Control

Last Answer : a) Topology

Which one of the following is not a function of network layer? a) routing b) inter-networkingc) congestion control d) error control

Description : Which one of the following is not a function of network layer? a) routing b) inter-networking c) congestion control d) error control

Last Answer : d) error control

The address resolution protocol (ARP) is used for a. Finding the IP address from the DNS b. Finding the IP address of the default gateway c. Finding the IP address that corresponds to a MAC address d. Finding the MAC address that corresponds to an IP address

Description : The address resolution protocol (ARP) is used for a. Finding the IP address from the DNS b. Finding the IP address of the default gateway c. Finding the IP address that corresponds to a MAC address d. Finding the MAC address that corresponds to an IP address

Last Answer : Finding the MAC address that corresponds to an IP address

___ layer perform the host addressing and packet routing. A. Application layer B. Transport layer C. Network layer D. Link layer

Description : ___ layer perform the host addressing and packet routing. A. Application layer B. Transport layer C. Network layer D. Link layer

Last Answer : C. Network layer 

Which of the following best illustrates the default subnet mask for a class A,B, and C Network? A. 0.0.0.0,0.0.0.1, 0.0.1.1 B. 255.255.255.0, 255.255.0.0,255.0.0.0 C. 255.0.0.0, 255.255.0.0, 255.255.255.0 D. 255.255.0.0, 255.255.255.0,255.255.255.255 E. None of the above

Description : Which of the following best illustrates the default subnet mask for a class A,B, and C Network? A. 0.0.0.0,0.0.0.1, 0.0.1.1 B. 255.255.255.0, 255.255.0.0,255.0.0.0 C. 255.0.0.0, 255.255.0.0, 255.255.255.0 D. 255.255.0.0, 255.255.255.0,255.255.255.255 E. None of the above

Last Answer : 255.0.0.0, 255.255.0.0, 255.255.255.0

What partof 192.168.10.51 is the Network ID, assuming a default subnet mask? A. 192 B. 192.168.10 C. 0.0.0.5 D. 51 E. None of the above

Description : What partof 192.168.10.51 is the Network ID, assuming a default subnet mask? A. 192 B. 192.168.10 C. 0.0.0.5 D. 51 E. None of the above

Last Answer : 192.168.10

What is the default subnet mask for a class C network? A. 127.0.0.1 B. 255.0.0.0 C. 255.255.0.0 D. 255.255.255.0 E. None of the above

Description : What is the default subnet mask for a class C network? A. 127.0.0.1 B. 255.0.0.0 C. 255.255.0.0 D. 255.255.255.0 E. None of the above

Last Answer : 255.255.255.0

. In IPv6, the___________ address isgenerally usedby a normal host as a unicast address. A) provider-based unicast B) link local C) site local D) none of the above

Description : . In IPv6, the___________ address isgenerally usedby a normal host as a unicast address. A) provider-based unicast B) link local C) site local D) none of the above

Last Answer : provider-based unicast

The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above

Description : The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above

Last Answer : multicast group

HMP (Host Monitoring Protocol) is: A. a TCP/IP protocol used todynamically bind ahigh level IP Address to alow-level physical hardware address B. a TCP/IP high level protocol for transferring files from one machine to another. C. a protocol used to monitor computers D. a protocol that handles error andcontrol messages E. None of the above

Description : HMP (Host Monitoring Protocol) is: A. a TCP/IP protocol used todynamically bind ahigh level IP Address to alow-level physical hardware address B. a TCP/IP high level protocol for transferring ... used to monitor computers D. a protocol that handles error andcontrol messages E. None of the above

Last Answer : a protocol used to monitor computers

DNS can obtain the of host if its domain name is known and vice versa. A) Station address B) IP address C) Port address D) Checksum

Description : DNS can obtain the of host if its domain name is known and vice versa. A) Station address B) IP address C) Port address D) Checksum

Last Answer : B) IP address

Which DNS client maps an address to a name or a name to an address especially when required by a host? a. Resolver b. Mapper c. Primary Server d. Secondary Server

Description : Which DNS client maps an address to a name or a name to an address especially when required by a host? a. Resolver b. Mapper c. Primary Server d. Secondary Server

Last Answer : a. Resolver

The address of a class B host is to be split into subnets with a 6-bit subnet number. What is the maximum number of subnets and the maximum number of hosts in each subnet? a. 62 subnets and 262142 hosts. b. 64 subnets and 262142 hosts. c. 62 subnets and 1022 hosts. d. 64 subnets and 1024 hosts

Description : The address of a class B host is to be split into subnets with a 6-bit subnet number. What is the maximum number of subnets and the maximum number of hosts in each subnet? a. 62 subnets and 262142 hosts. b. 64 subnets and 262142 hosts. c. 62 subnets and 1022 hosts. d. 64 subnets and 1024 hosts

Last Answer : c. 62 subnets and 1022 hosts.

Which DNS client maps an address to a name or a name to an address especially when required by a host? A. Resolver B. Mapper C. Primary Server D. Secondary Server

Description : Which DNS client maps an address to a name or a name to an address especially when required by a host? A. Resolver B. Mapper C. Primary Server D. Secondary Server

Last Answer : A. Resolver

To deliver a message to the correct application program running on a host, the _______ address must be consulted. A. IP B. MAC C. Port D. None of the mentioned

Description : To deliver a message to the correct application program running on a host, the _______ address must be consulted. A. IP B. MAC C. Port D. None of the mentioned

Last Answer : C. Port

Which address is used to identify a process on a host by the transport layer? a) physical address b) logical address c) port address d) specific address

Description : Which address is used to identify a process on a host by the transport layer? a) physical address b) logical address c) port address d) specific address

Last Answer : c) port address

Network layer protocol exits in _________ a. Host b. Switches c. Packets d. Bridges

Description : Network layer protocol exits in _________ a. Host b. Switches c. Packets d. Bridges

Last Answer : a. Host

The function of IP adress is …………………………………………. A. host identification B. network interface identification C. location addressing D. all of the above

Description : The function of IP adress is …………………………………………. A. host identification B. network interface identification C. location addressing D. all of the above

Last Answer : D. all of the above

. In addresses for _______ networks, the first 16 bits specify a particular network, and the last 16 bits specify a particular host. A. class A B. class C C. class B D. class D

Description : . In addresses for _______ networks, the first 16 bits specify a particular network, and the last 16 bits specify a particular host. A. class A B. class C C. class B D. class D

Last Answer : C. class B

What layer in the TCP/IP stack is equivalent to the Transport layer of the OSI model? a. Internet b. Host to host c. Network Access d. Application

Description : What layer in the TCP/IP stack is equivalent to the Transport layer of the OSI model? a. Internet b. Host to host c. Network Access d. Application

Last Answer : b. Host to host

The purpose of a proxy server is to control exchange of data between the two networks at …………..instead of ……….. A. an application level , an IP level B. network layer, physical layer C. an application layer, physical layer D. Network layer , an application layer

Description : The purpose of a proxy server is to control exchange of data between the two networks at …………..instead of ……….. A. an application level , an IP level B. network layer, physical layer C. an application layer, physical layer D. Network layer , an application layer

Last Answer : A. an application level , an IP level

In ATM, the ______ layerprovides routing, traffic management, switching, and multiplexing services. A) physical B) ATM C) AAL D) none of the above

Description : In ATM, the ______ layerprovides routing, traffic management, switching, and multiplexing services. A) physical B) ATM C) AAL D) none of the above

Last Answer : ATM

_______ is an implementation of multicast distance vector routing. It is asource-based routing protocol, based on RIP. A) MOSPF B) DVMRP C) CBT D) none of the above

Description : _______ is an implementation of multicast distance vector routing. It is asource-based routing protocol, based on RIP. A) MOSPF B) DVMRP C) CBT D) none of the above

Last Answer : DVMRP

The Multicast Open Shortest Path First (MOSPF)protocol is an extension of the OSPF protocol that uses multicast routing to create source-based trees. The protocol is basedon _______ routing. A) distancevector B) link state C) path vector D) none of the above

Description : The Multicast Open Shortest Path First (MOSPF)protocol is an extension of the OSPF protocol that uses multicast routing to create source-based trees. The protocol is basedon _______ routing. A) distancevector B) link state C) path vector D) none of the above

Last Answer : link state

Multicast link state routing uses the _______ tree approach. A) source-based B) group-shared C) a or b D) none of the above

Description : Multicast link state routing uses the _______ tree approach. A) source-based B) group-shared C) a or b D) none of the above

Last Answer : source-based