Define measurement and state the significance of electrical measurement system.

1 Answer

Answer :

Measurement: Measurement is essentially a process in which magnitude of a quantity is determined in comparison with another similar quantity with significant units. OR The measurement of a given parameter or quantity is the act or result of a quantitative comparison between a predefined standard and an unknown quantity to be measured.


Significance of Electrical Measurement System: i) The complete area of automation / automatic control is based on measurement. ii) The new discoveries / inventions require sophisticated measurement techniques. iii) The measurement is required to monitor a process / operation. iv) It is required to measure all physical / electrical / mechanical quantities. v) The measurement is required in Research and development (R & D) department. vi) The measurement is widely required in various industries for quality production. vii) The measurement is widely required in various educational institutes for training purpose. viii) The measurement is required for trading and dealing purposes. ix) The measurement is required to set particular standards and tolerances. x) The measurement conforms the validity of hypothesis and also adds to its understanding.

Related questions

Description : Explain significance and purpose of electrical measurement system.

Last Answer : ➢ Significance of Electrical Measurement System  1. The measurement is required for measurement of all physical quantities for e.g speed, velocity, temperature, pressure etc.  2. All electrical ... 4. These standards and references may changes time to time, area to area person to person 

Description : State the significance of term measurement. 

Last Answer : Measurement is the quantitative comparison between unknown quantities with known standard. For doing this process there is need of physical device, called as measuring instrument. The measurement confirms the validity of the hypothesis and also adds to its understanding.

Last Answer : Commonly used instruments in power system measurement are induction.

Description : State the significance of power factor.

Last Answer : Significance of power factor:-  1. Cosine of angle between voltage & current in a circuit is called power factor. 2. It is a measure of the real power in a circuit. 3. Inductive & ... KVA rating equipment 5. Greater conductor size 6. CosØ = R/Z  CosØ= Active Power/ Apparent Power 

Description : what are the significance of kernel in RTOS ?

Last Answer : In every RTOS there is the kernel. The kernel is the core supervisory software. The kernel provides minimal logic. Scheduling is also provided by the kernel. The resource- ... device managment service.RTOS kernel has interrupt management service.RTOS kernel has memory management service.

Description : Measurement of a non -electrical quantity involves the following four subsystems:  a) amplifier block b) display block c) instrumentation block d) transducer block  The correct, sequence in which these block occur is  (1) d,a,c,b (2) d, c, a, b (3) a, c, b, d (4) a, b, c, d

Last Answer : Measurement of a non -electrical quantity involves the following four subsystems:  a) amplifier block b) display block c) instrumentation block d) transducer block  The correct, sequence in which these block occur is d,a,c,b

Description : State how pressure measurement can be done using Dead weight tester.

Last Answer : The handle is fully drawn out and the oil is allowed to enter in the cylinder (i.e. gauge and piston) The weight to be measured is placed on the platform. Now the handle is turned ... of the area of the piston and the pressure indicated on the gauge is equal to the weight under measurement.

Description : State any two disadvantages of one wattmeter method of measurement of 3 phase power.

Last Answer : State any two disadvantages of one wattmeter method of measurement of 3 phase power. Disadvantages of one wattmeter method:- 1. Only used for balanced load 2. It can not be used for ... connection then neutral point must be available 4. Delta connection must be opened to connect current coil.

Description : Name two methods for measurement of low, medium and high resistance. Give one advantage and one limitation of V- I method.

Last Answer : Methods for measurement of low resistance:  1. Ammeter voltmeter method  2. Kelvin's bridge method  3. Ohm meter method  4. Potentiometer method  5. Digital/analog multi-meter ... must be infinity for perfectly accurate measurement which is not possible.  2. Connection errors.

Description : Describe with working of LCR meter for measurement of inductance. 

Last Answer : working of LCR:- A LCR meter (Inductance (L), Capacitance (C), and Resistance (R) test equipment used to measure the inductance, capacitance and, resistance of a component. It works on the ... in parallel (as would be encountered in measuring a capacitor with a leaky dielectric) [Q setting ] 

Description : Explain V- I method of measurement of medium resistance. 

Last Answer : In this method, use suitable source, ammeter and voltmeter and connect them as shown in the above diagram. Take reading of voltmeter and ammeter, then value of resistance = R = V/I Ω To minimise the error take 4 to 5 observation for the same resistance and take their average.

Description : Units of Measurement

Last Answer : 1 horse power is 745.7 watts 1 horse power = work equal to lifting 550 lbs of weight to one foot for one second 1 calorie is equal to 4.2 Joules 1 barrel is equal to ... often chlorine or bromine. Use: as solvents, as aerosol propellants, in refrigeration. It is commonly used in refrigerator.

Description : List the different level measurement methods. 

Last Answer : Liquid Level Measurement Direct method 1. Hook type 2. Sight glass gype 3. Float type 4. Dip stick Indirect method 1. Hydraustatic pressure type 2. Electrical type a) Capacitance level indicator b) Radiation level detector c) Ultrasonic level gauge 3. Radar type

Description : Draw Bourdon tube with LVDT setup for pressure measurement.

Last Answer : Bourdon tube with LVDT setup for pressure measurement.

Description : sketch time period measurement by CRO.

Last Answer : Horizontal sweep is turned ON and the display appealing on the screen is adjusted by varying different control knobs provided on the front panel of CRO, till the signal is suitably displayed ... Where m=Number of division in one complete cycle n=Setting of time base =Time/Division

Description : different types of errors occurs in measurement.

Last Answer : Generally errors are classified into three types: systematic errors, random errors and blunders. 1) Gross Errors 2) Random Errors 3) Systematic Errors Instrumental Errors Environmental ... to wrong observations or reading in the instruments particularly in case of energy meter reading. 

Description : tern null as it applies to bridge measurement.

Last Answer : Null measurements balance voltages so that there is no current flowing through the measuring device and, therefore, no alteration of the circuit being measured. Null measurements are generally more ... the use of standard voltmeters and ammeters, and they still have limits to their precision.

Description : What are the factors influencing measurement errors?

Last Answer : The factor influencing measurement errors are accuracy, precision, range and bandwidth, sensitivity, resolution and uncertainty.

Description : For measurement of radio frequency ac signals __________ type meter is used

Last Answer : For measurement of radio frequency ac signals thermo-couple type meter is used

Description : The bridge most suited for accurate measurement of relative permittivity of dielectric materials is (A) Carey Foster Bridge (B) Anderson’s bridge (C) Heaviside Bridge modified by Campbell. (D) Schering Bridge.

Last Answer : The bridge most suited for accurate measurement of relative permittivity of dielectric materials is Schering Bridge.

Description : Accurate measurement of very low resistances is possible with (A) Megger (B) Wheatstone Bridge (C) Kelvin’s Double Bridge (D) Wagner’s Earthing Device

Last Answer : Accurate measurement of very low resistances is possible with Kelvin’s Double Bridge

Last Answer : For measurement of inductance having high value, we should use Hay's bridge.

Last Answer : For measurement of mutual inductance we can use Heaviside bridge.

Description : In a 3-phase power measurement by two wattmeter method, both the watt meters had identical readings. The power factor of the load was?

Last Answer : In a 3-phase power measurement by two wattmeter method, both the watt meters had identical readings. The power factor of the load was unity.

Description : What is measurement error ?

Last Answer : Measurement error :- Measurement is the process of comparing unknown quantity with known or standard quantity. Error is the difference between ... by fluctuations in reading measurement apparatus. Random error show different result for same repeated measurement.

Description : Why is the USS Arizona memorial important/significant?

Last Answer : answer:Ever heard of World War II? Ever learned where it began? Ever learned where over a thousand innocent sailors are spending eternity? Ever heard of the sneak attack by the Japs? Ever asked ... honor the dead and to make note of their sacrifice. That is why the Arizona memorial is important.

Description : What are the terms for the dimensions of a box? See detail.

Last Answer : Length, width, height.

Description : Draw block diagram of CNC system and state function of each block.

Last Answer : (i) Input Devices: These are the devices which are used to input the part program in the CNC machine. There are three commonly used input devices and these are punch tape reader, magnetic ... Unit: A monitor is used to display the programs, commands and other useful data of CNC machine. 

Description : State the need of modulation in communication system.

Last Answer : Need of modulation:- 1. To reduce the height of antenna 2. To avoids mixing of signals 3. To increases the range of communication 4. To make multiplexing of maximum signal is possible 5. To improve the quality of reception

Description : State two advantages of digital system over analog system.

Last Answer : 1. They are less susceptible to noise. 2. The effect of fluctuation in the characteristic of the components, ageing of components etc. is very small in digital circuits. 3. Digital circuits have capability of memory which makes them suitable for computers. 4. More accurate.

Description : Draw block diagram of instrumentation system. State function.

Last Answer : Primary transducer: The sensor which comes in contact with the measurement medium to sense the quantity. Variable conversion element: the transducer which converts the sensor ... transmitted through suitable transmission medium to the operator or presented with the help of indicators.

Description : State the functions of fuel system and exhaust system of a diesel power station.

Last Answer : Fuel system: It supplies fuel to engine for combustion purpose. It consists of Fuel Pump: - It supplies fuel to engine for combustion purpose. Strainer: - Are provided to remove suspended impurities and ... most of the noise. Chimney:- To exhaust gases in the atmosphere as high as possible. 

Description : State any four advantages of interconnected system.

Last Answer : Advantages of interconnected Systems: i) Reduced Overall installed Capacity: Inter connected power systems reduce the overall requirement of installed capacity for a given load area. With ... to interconnection, there is optimum utilization of available natural resources in the country.

Description : State the functions of following elements: i) Diesel engine system ii) Air intake system iii) Engine exhaust system iv) Engine starting system.

Last Answer : i) Diesel engine system:-  Four strokes Two strokes ii) Air intake system:- Air intake system is provided to supply air to engine cylinder for fuel combustion.  iii) Engine exhaust system ... provided to rotate the engine initially until the firing starts and engine run under its own power. 

Description : steady-state stability of a power system is improved by

Last Answer : steady-state stability of a power system is improved by using double circuit line instead of single circuit line

Description : Define: primary and secondary distribution system 

Last Answer : i) Primary Distribution:  It is a 3-phase, 3-wire transmission line connected in between receiving substation to Distribution substation. OR It is link between receiving substation & ... substation to consumer line. OR It is link between distribution transformer substation & consumer. 

Description : Define the term electrical noise. List types of noises.

Last Answer : Electrical Noise:- It can be defined as undesirable electrical signals, which distort or interfere with an original (or desired) signal.  Types of noises:- 

Description : Define Electrical Installation and give its classification.

Last Answer : Meaning of Electrical installation : Electrical installation is a process of estimation and erection of electrical wiring with materials, and electrical machines used by ... Residential Electrical Installation ii) Commercial Electrical Installation iii) Industrial Electrical Installation 

Description : Define: (i) Resolution, (ii) Calibration, with reference to electrical measuring systems.

Last Answer : Resolution The smallest increment in input (the quantity being measured) which can be detected with certainty by an instrument is called its resolution or discrimination.  OR It is ... the measuring instrument with standard instrument to find out the error in the instrument under test.

Description : characteristics of Hi-Fi amplifier system.

Last Answer : Characteristics of HI-FI amplifier: 1. Signal to noise ratio should be better than 50dB. 2. Frequency response should be flat within +-1dB. 3. Nonlinear distortion should not be more ... provided. 6. Environmental conditions should be such as to eliminate the external noise in listening room. 

Description : DTH System

Last Answer : Outdoor unit: It consists of a receiving antenna, low noise amplifier & converter the receiving antenna is parabolic reflector with a horn as the active element. The horn can be ... fed to the normal domestic TV receiver, which after due processing reproduces picture & sound. 

Description : Describe the function of MUSE system for HDTV.

Last Answer : Bandwidth can be reduced by MUSE (Multiple Sub -Nyquist Sampling Encoding) system MUSE stands for Multiple Sub-Nyquist sampling encoding and is an HDTV bandwidth compression schemedeveloped by ... digital Audio system is called DANCE (Digital Audio Near-Instantaneous Compression and expansion). 

Description : requirements of a distribution system

Last Answer : Following requirements of a distribution system.  1. Layout should be simple in design. 2. It should have less initial cost 3. The distribution system should have minimum distribution ... stability of existing distribution system. 15. Time required for completion of work should be less. 

Description : Why radial distribution system used for short distance ? 

Last Answer : Because of following disadvantages radial distribution system is not used for long distance:  Since there is only one feeder to DTC feed at one point so, 1) There is no reliability ... more time for fault finding & repairing Hence radial distribution system is used for short distance.

Description : vertical deflection system and explain its operation.

Last Answer : The main function of the vertical deflection system , is to provide an amplified signal of proper level to derive the vertical deflection plates without any distortion. For amplification of the ... suppression, reduced nonlinear effects because none of the plates are at ground potential.

Description : Working of Simple Vapor absorption system

Last Answer : Working of Simple Vapor absorption system:  A Simple Vapor absorption system consists of evaporator, absorber, generator, condenser, expansion valve, pump & reducing valve. In this system ammonia ... where there is scarcity of Electricity and it is very useful at partial and full load. 

Description : Write four advantages of FMS (Flexible Manufacturing System).

Last Answer : 1. Large variety of same products 2. Profitable investment. 3. Requires limited inventory. 4. Low labor cost. 5. Flexible system. 6. Speedy production. 7. Improve product quality. 

Description : List and explain the components of a hydraulic system.

Last Answer : Components Hydraulic: Hydraulic pump- Supply fluid to the components in the system. Pressure in the system develops in reaction to the load. Hence, a pump rated for 5,000 ... mechanical components and need to be removed along with other contaminants.  Seals, fittings and connections.

Description : Explain how MEMS accelerometer is used as airbag sensor for car system.

Last Answer : MEMS Accelerometer is used as airbag sensor: Mechanical ignition airbags fit inside the steering wheel pad. When a collision occurs, the inertial sensor moves, setting off a ... the airbag with wiring. This is especially effective when fitting both driver- and passenger-side airbags.

Description : What are advantages and disadvantages of Mechatronics system? 

Last Answer : Advantages of Mechatronics system:  High level of integration.  Increased functionality and better design.  More use of electronics and software instead of mechanical function.  Assumes ... Its replacement is difficult, that it is difficult to change old system to new system.