Curl cannot be employed in which one of the following?
a) Directional coupler
b) Magic Tee
c) Isolator and Terminator
d) Waveguides

1 Answer

Answer :

d) Waveguides

Related questions

Description : A component that samples the microwave signal travelling in one direction down to the transmission line A. Isolator B. Combiner C. Directional coupler D. Attenuator

Last Answer : C. Directional coupler

Description : Spherical systems are employed in waveguides. State True/False a) True b) False

Last Answer : b) False

Description : Cylindrical system is employed in waveguides. State True/False. a) True b) False

Last Answer : a) True

Description : The velocity of a wave travelling in the air medium without transmission lines or waveguides(wireless) is a) 6 x 10 8 b) 3 x 10 8 c) 1.5 x 10 8 d) 9 x 10 8

Last Answer : b) 3 x 10 8

Description : In waveguides, which of the following conditions will be true? a) V > c b) V < c c) V = c d) V >> c

Last Answer : a) V > c

Description : Rectangular waveguides dominate the circular waveguides. Find the reason. a) Low cut-off frequency b) Easy to design c) More wave propagation d) The statement is false

Last Answer : b) Easy to design

Description : Referred to as a ferrite device that can be used in lieu of a duplexer to isolate a microwave transmitter and receiver when both are connected to the same antenna. A. Isolator B. Circulator C. Coupler D. Diode.

Last Answer : B. Circulator

Description : Write working of opto coupler as an isolator.

Last Answer : Optocoupler is as shown in fig. it consist of LED as an light source and phototransistor act as light detector.  When input pulse is applied LED turns ON.Light emitted by LED focused on CB ... starts flowing.As input pulse reduces to zero LED turns OFF collector current becomes zero. 

Description : Best choice of transmission line component to couple a coaxial line to a parallel-wire line A. Shorting B. Balun C. Slotted line D. Directional coupler

Last Answer : B. Balun

Description : To couple a coaxial line to parallel line, it is better to use a ______. A. Slotted line B. Quarter-wave transformer C. Directional Coupler D. Balun

Last Answer : D. Balun

Description : To connect coaxial line to a parallel-wire _________ is the best to use. A. directional coupler B. quarter-wave transformer C. balun D. slotted line

Last Answer : C. balun

Description : What happens to reflected energy that enters a directional coupler that is designed to sample incident energy?

Last Answer : . The reflected energy adds at the absorbent material and is absorbed.

Description : in a directional coupler that is designed to sample the incident energy, what happens to the two portions of the wavefront when they arrive at the pickup probe?

Last Answer : The wavefront portions add.

Description : What is the purpose of the absorbent material in a directional coupler?

Last Answer : Absorb the energy not directed at the pick-up probe and a portion of the overall energy

Description : How far apart are the two holes in a simple directional coupler?

Last Answer : 1/4 wavelength.

Description : What is the primary purpose of a directional coupler?

Last Answer : Sampling energy within a waveguide.

Description : Describe a directional coupler.

Last Answer : A fiber optic coupler that prevents the transfer of power between input fibers.

Description : To couple a coaxialline toa parallel-wire line,itisbesttouse a a. slotted line b.balun c. directional coupler d. quarter-wave transformer

Last Answer : b.balun

Description : Fortransmission-line loadmatchingover a range offrequencies,itisbesttouse a a. balun b. broadband directional coupler c. double stub d. single stub of adjustable position

Last Answer : c. double stub

Description : Describe the working of directional coupler with neat diagram. 

Last Answer : Directional couplers are devices that will pass signal across one path while passing a much smaller signal along another path.  One of the most common uses of the directional coupler is to ... . The frequency determines the separation of the two holes as a fraction of the wavelength.  

Description : In a directional coupler:  (1) Isolation (dB) equals coupling plus directivity (2) Coupling (dB) equals isolation plus directivity (3) Directivity (dB) equals isolation plus coupling (4) Isolation (dB) equals (coupling) (directivity)

Last Answer : In a directional coupler: Isolation (dB) equals coupling plus directivity.

Description : Find the curl of E when B is given as 15t. a) 15 b) -15 c) 7.5 d) -7.5

Last Answer : b) -15

Description : For static fields, the curl of E will be a) Rotational b) Irrotational c) Solenoidal d) Divergent

Last Answer : b) Irrotational

Description : The non existence of the magnetic monopole is due to which operation? a) Gradient b) Divergence c) Curl d) Laplacian

Last Answer : b) Divergence

Description : Which equation will be true, if the medium is considered to be air? a) Curl(H) = 0 b) Div(H) = 0 c) Grad(H) = 0 d) Div(H) = 1

Last Answer : b) Div(H) = 0

Description : In a medium other than air, the electric flux density will be a) Solenoidal b) Curl free c) Irrotational d) Divergent

Last Answer : d) Divergent

Description : The charge density of a electrostatic field is given by a) Curl of E b) Divergence of E c) Curl of D d) Divergence of D

Last Answer : d) Divergence of D

Description : The total current density is given as 0.5i + j – 1.5k units. Find the curl of the magnetic field intensity. a) 0.5i – 0.5j + 0.5k b) 0.5i + j -1.5k c) i – j + k d) i + j – k

Last Answer : b) 0.5i + j -1.5k

Description : In dielectric medium, the Maxwell second equation becomes a) Curl(H) = Jd b) Curl(H) = Jc c) Curl(E) = Jd d) Curl(E) = Jd

Last Answer : a) Curl(H) = Jd

Description : The Maxwell second equation that is valid in any conductor is a) Curl(H) = Jc b) Curl(E) = Jc c) Curl(E) = Jd d) Curl(H) = Jd

Last Answer : a) Curl(H) = Jc

Description : Which of the following identities is always zero for static fields? a) Grad(Curl V) b) Curl(Div V) c) Div(Grad V) d) Curl(Grad V)

Last Answer : d) Curl(Grad V)

Description : The curl of the electric field intensity is a) Conservative b) Rotational c) Divergent d) Static

Last Answer : b) Rotational

Description : Find the correct relation between current density and magnetization. a) J = Grad(M) b) J = Div(M) c) J = Curl(M) d) M = Curl(J)

Last Answer : c) J = Curl(M)

Description : Choose the best relation. a) A = -Div(V) b) V = Curl(A) c) H = -Grad(V) d) V = Div(E)

Last Answer : c) H = -Grad(V)

Description : The relation between flux density and vector potential is a) B = Curl(A) b) A = Curl(B) c) B = Div(A) d) A = Div(B)

Last Answer : a) B = Curl(A)

Description : Ampere law states that, a) Divergence of H is same as the flux b) Curl of D is same as the current c) Divergence of E is zero d) Curl of H is same as the current density

Last Answer : d) Curl of H is same as the current density

Description : In metals which of the following equation will hold good? a) Curl(H) = J b) Curl(J) = dD/dt c) Curl(H) = D d) Curl(J) = dB/dt

Last Answer : a) Curl(H) = J

Description : Find the Maxwell law derived from Ampere law. a) Div(I) = H b) Div(H) = J c) Curl(H) = J d) Curl(B) = D

Last Answer : c) Curl(H) = J

Description : Find the Maxwell equation derived from Faraday’s law. a) Div(H) = J b) Div(D) = I c) Curl(E) = -dB/dt d) Curl(B) = -dH/dt

Last Answer : c) Curl(E) = -dB/dt

Description : The point form of Ampere law is given by a) Curl(B) = I b) Curl(D) = J c) Curl(V) = I d) Curl(H) = J

Last Answer : d) Curl(H) = J

Description : When curl of a path is zero, the field is said to be conservative. State True/False. a) True b) False

Last Answer : a) True

Description : Gauss theorem uses which of the following operations? a) Gradient b) Curl c) Divergence d) Laplacian

Last Answer : c) Divergence

Description : The Stoke’s theorem can be used to find which of the following? a) Area enclosed by a function in the given region b) Volume enclosed by a function in the given region c) Linear distance d) Curl of the function

Last Answer : a) Area enclosed by a function in the given region

Description : Find the value of Stoke’s theorem for A = x i + y j + z k. The state of the function will be a) Solenoidal b) Divergent c) Rotational d) Curl free

Last Answer : d) Curl free

Description : The Stoke’s theorem uses which of the following operation? a) Divergence b) Gradient c) Curl d) Laplacian

Last Answer : c) Curl

Description : If a function is said to be harmonic, then a) Curl(Grad V) = 0 b) Div(Curl V) = 0 c) Div(Grad V) = 0 d) Grad(Curl V) = 0

Last Answer : c) Div(Grad V) = 0

Description : Which of the following Maxwell equations use curl operation? a) Maxwell 1st and 2nd equation b) Maxwell 3rd and 4th equation c) All the four equations d) None of the equations

Last Answer : a) Maxwell 1st and 2nd equation

Description : Find the curl of the vector A = yz i + 4xy j + y k a) xi + j + (4y – z)k b) xi + yj + (z – 4y)k c) i + j + (4y – z)k d) i + yj + (4y – z)k

Last Answer : d) i + yj + (4y – z)k

Description : Find the curl of A = (y cos ax)i + (y + e x )k a) 2i – ex j – cos ax k b) i – ex j – cos ax k c) 2i – ex j + cos ax k d) i – ex j + cos ax k

Last Answer : b) i – ex j – cos ax k

Description : Find the curl of the vector and state its nature at (1,1,-0.2) F = 30 i + 2xy j + 5xz 2 k a) √4.01 b) √4.02 c) √4.03 d) √4.04

Last Answer : d) √4.04