The resistance in a magnetic material is called as
a) Capacitance
b) Inductance
c) Reluctance
d) Magnetic resistance

1 Answer

Answer :

c) Reluctance

Related questions

Description : The magnetostatics highly relies on which property? a) Resistance b) Capacitance c) Inductance d) Moment

Last Answer : c) Inductance

Description : The opposition to the establishment of magnetic lines of force in a magnetic circuit is called the circuit's _______. A. resistance B. reluctance C. impedance D. inductance

Last Answer : Answer: B

Description : The capacitance of a material refers to a) Ability of the material to store magnetic field b) Ability of the material to store electromagnetic field c) Ability of the material to store electric field d) Potential between two charged plates

Last Answer : c) Ability of the material to store electric field

Description : The inductance is the measure of a) Electric charges stored by the material b) Emf generated by energising the coil c) Magnetic field stored by the material d) Magnetization of dipoles

Last Answer : c) Magnetic field stored by the material

Description : Calculate the reluctance of a material with length 2π x 10 -4 in air with area 0.5. a) 1 b) 10 c) 100 d) 1000

Last Answer : d) 1000

Description : Calculate the reluctance of the material with a mmf of 3.5 units and flux of 7units. a) 32.5 b) 10.5 c) 0.5 d) 2

Last Answer : b) 10.5

Description : The basic control action of a magnetic amplifier depends upon _____________. A. variations in the load capacitance B. changes in inductance C. type of core material D. construction of the core

Last Answer : Answer: B

Description : Find the time constant of a capacitor with capacitance of 2 microfarad having an internal resistance of 4 megaohm. a) 2 b) 0.5 c) 8 d) 0.25

Last Answer : c) 8

Description : Find the time constant in a series R-L circuit when the resistance is 4 ohm and the inductance is 2 H. a) 0.25 b) 0.2 c) 2 d) 0.5

Last Answer : d) 0.5

Description : Calculate the capacitance of a material in air with area 20 units and distance between plates is 5m. a) 35.36pF b) 3.536pF c) 35.36nF d) 3.536nF

Last Answer : a) 35.36pF

Description : Find the inductance of a material with 100 turns, area 12 units and current of 2A in air. a) 0.75mH b) 7.5mH c) 75mH d) 753mH

Last Answer : a) 0.75mH

Description : What is the effect of resistance , inductance and capacitance in transmission line ?

Last Answer : These 3 factors create voltage drop and power loss of the line. The inductive reactance creates a voltage drop across the line and the capacitance creates a charging current.

Description : 'Farad' is the unit of : (1) Capacitance (2) Inductance (3) Resistance (4) Conductance

Last Answer : (1) Capacitance Explanation: The Farad is the SI derived unit of capacitance. It is named after the English physicist Michael Faraday.

Description : The fuse in our domestic electric circuit melts when there is a high rise in – (1) Inductance (2) Current (3) Resistance (4) Capacitance

Last Answer : (2) Current Explanation: In electronics and electrical engineering, a fuse is a type of low resistance resistor that acts as a sacrificial device to provide over protection, of either the load ... fuse interrupts excessive current (blows) so that further damage by overheating or fire is prevented.

Description : The formula for computing impedance in a series circuit containing resistance, capacitance, and inductance is _____________. [ NOTE: the symbol * stands for 'multiplied by' ] A. Z = RT + XL + XC B. Z = R + XL - XC C. Z * Z = R * R + (XL - XC) * (XL - XC) D. Z = R * R + (XL * XC) - (XL * XC)

Last Answer : Answer: C

Description : Capacitance is the property of an electric circuit opposing a change in the _____________. A. current in the circuit B. voltage in the circuit C. inductance in the circuit D. resistance in the circuit

Last Answer : Answer: B

Description : AC circuits develop resistance, inductance, and capacitance. The inductive reactance of a circuit is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: A

Description : Alternating current circuits develop resistance, inductance, and capacitance. The capacitance of individual capacitors is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: D

Description : Alternating current circuits develop resistance, inductance and capacitance. The inductance of a coil is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: C

Description : AC circuits possess characteristics of resistance, inductance, and capacitance. The capacitive reactance of a circuit is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: A

Description : The Wheatstone bridge is a precision measuring instrument utilizing the principle of changes in _____________. A. inductance B. capacitance C. resistance D. amperage

Last Answer : Answer: C

Description : If an antenna is too short for the wavelength being used, the effective length can be increased by adding: A. capacitance in series B. inductance in series C. resistance in parallel D. resistance in series

Last Answer : B. inductance in series

Description : A transmitted signal 5 meters in wavelength is received by an antenna coil having a 50-Ω resistance and a 0.01 H inductance. What is the capacitance of the tuner shunting the antenna coil at this point? A. 0.704 fF B. 0.704 μF C. 0.704 nF D. 0.704 mF

Last Answer : A. 0.704 fF

Description : Hays bridge is used to measure___________ and Schering bridge is used to measure____________ a) Inductance, Inductance b) Inductance, Capacitance c) Capacitance, Inductance d) Resistance, Capacitance

Last Answer : Ans: Inductance, Capacitance

Description : Which of the following parameter can be neglected for a short line ? (a) Inductance (b) Capacitance (c) Resistance (d) Reactance

Last Answer : (b) Capacitance

Description : Which of the following are the constants of the transmission lines ? (a) Resistance (b) Inductance (c) Capacitance (d) All of the above

Last Answer : (d) All of the above

Description : A transmission line is said to have distributed constants of inductance, capacitance, and resistance along the line. What units of measurement are used to express these constants?

Last Answer : Inductance is expressed in micro henrys per unit length, capacitance is expressed in picofarads per unit length, and resistance is expressed in ohms per unit length.

Description : An AC bridge that measures inductance in terms of resistance and capacitance.

Last Answer : Owen's Bridge

Description : Refers to an ac bridge for measuring the inductance and Q of an inductor in terms of resistance, frequency and a standard capacitance.

Last Answer : hay bridge

Description : Which of the following are the constants of the transmission lines ? (a) Resistance (b) Inductance (c) Capacitance (d) All of the above

Last Answer : (d) All of the above

Description : In AC Circuit Theory, the term that replaces the resistance is: w) inductance x) capacitance y) impedance z) reactance

Last Answer : ANSWER: Y -- IMPEDANCE

Description : ‘Farad’ is the unit of : (1) Capacitance (2) Inductance (3) Resistance (4) Conductance

Last Answer : Capacitance

Description : An a.c series circuit has resistance of 10ohm, inductance of 0.1H and capacitance of 10µf, voltage applied to circuit is 200V. find (i) Resonant frequency (ii) Current at resonance (iii) Power at resonance 

Last Answer : Solution: For RLC series circuit

Last Answer : Resistance: This could be defined as the opposition  or retarding force to the flow of current in a circuit. It is measured in Ohms. Capacitance: The ability of a system of electrical conductors and insulators ... due to a rate of change of current in the circuit or coil. It's unit is Henry.

Description : Referred to the dielectric constant of a transmission line material. A. Inductance and capacitance B. Velocity factor C. Characteristic impedance D. Propagation velocity

Last Answer : B. Velocity factor

Description : 68 The path of a magnetic flux in a transformer should have A. High resistance B. High reluctance C. Low resistance D. Low reluctance

Last Answer : D. Low reluctance

Last Answer : The magnetic reluctance of a material decreases with increasing cross-sectional area of the material.

Description : Calculate potential of a metal plate of charge 28C and capacitance 12 mF. a) 3.33 kohm b) 2.33 kohm c) 3.33 Mohm d) 2.33 Mohm

Last Answer : b) 2.33 kohm

Description : A cable of core radius 1.25cm and impregnated paper insulation of thickness 2.13cm and relative permittivity 3.5. Compute the capacitance of the cable/km(in nF) a) 195.7 b) 179.5 c) 157.9 d) 197.5

Last Answer : a) 195.7

Description : Compute the capacitance between two concentric shells of inner radius 2m and the outer radius is infinitely large. a) 0.111 nF b) 0.222 nF c) 4.5 nF d) 5.4 nF

Last Answer : b) 0.222 nF

Description : Calculate the capacitance of two parallel plates of area 2 units separated by a distance of 0.2m in air(in picofarad) a) 8.84 b) 88.4 c) 884.1 d) 0.884

Last Answer : b) 88.4

Description : Find the capacitance when charge is 20 C has a voltage of 1.2V. a) 32.67 b) 16.67 c) 6.67 d) 12.33

Last Answer : b) 16.67

Description : The inductance of a coaxial cable with inner radius a and outer radius b, from a distance d, is given by a) L = μd ln(b/a)/2π b) L = 2π μd ln(b/a) c) L = πd/ln(b/a) d) L = 0

Last Answer : a) L = μd ln(b/a)/2π

Description : Calculate the mutual inductance of two tightly coupled coils with inductances 49H and 9H. a) 21 b) 58 c) 40 d) 49/9

Last Answer : a) 21

Description : The inductance is proportional to the ratio of flux to current. State True/False. a) True b) False

Last Answer : a) True

Description : The equivalent inductance of two coils with series opposing flux having inductances 7H and 2H with a mutual inductance of 1H. a) 10 b) 7 c) 11 d) 13

Last Answer : b) 7

Description : The expression for the inductance in terms of turns, flux and current is given by a) L = N dφ/di b) L = -N dφ/di c) L = Niφ d) L = Nφ/i

Last Answer : a) L = N dφ/di

Description : The equivalent inductances of two coils 2H and 5H in series aiding flux with mutual inductance of 3H is a) 10 b) 30 c) 1 d) 13

Last Answer : d) 13

Description : Which type of flux will increase the inductance? a) Series aiding b) Series opposing c) Shunt aiding d) Shunt opposing

Last Answer : a) Series aiding

Description : Inductance is present in semiconductor. State True/False. a) True b) False

Last Answer : b) False