State the use of RADAR type level transducer & list two advantages.

1 Answer

Answer :

Applications of radar type transducer: i) RADAR type level transducer is suitable for large tanks with range upto 200m for level measurement. ii) It is used for continuous level measurement.


Advantages of radar type transducer i) High accuracy. ii) Non-contact type. iii) Not affected by corrosive materials. iv) Can be used for ‘hard to handle’ applications.

Related questions

Description : State advantages and disadvantages of continuous wave Radar

Last Answer : Advantages continuous wave RADAR : 1.Single frequency transmission and hence narrow receiver bandwidth 2.Duty cycle is unity, so mean power can be as high as transmitters will permits. 3.Ability ... required for receiver and transmitter. 3.Cannot detect targets crossing its beam at right angles.

Description : List any two materials for Piezoelectric transducer.

Last Answer : i) Quartz crystal, ii) Barium titanete , iii) Rochelle salt , iv) Lithium Sulphate, v) Potassium Dihydrogen phosphate.

Description : List four electric pressure transducer.

Last Answer : List of electric pressure measuring devices: 1. Diaphragm with strain gauge 2. Bourdon Tube with LVDT 3. Differential Pressure cell 4. Piezoelectric type pressure transducer 5. Capacitance pressure transducer 6. Optical Pressure transducer 7. Resistive pressure transducer 

Description : State the concept of continuous wave RADAR. Sketch its block diagram. State its any two applications.

Last Answer : Concept- Transmission is continuous here, the circulator is used to provide isolation between the transmitter and the receiver. Since transmission is continuous, it would be pointless to use a ... It is used to measurement of relative velocity to distinguish moving target from stationary objects 

Description : State RADAR range equation and write factor influencing maximum range.

Last Answer : Free Space RADAR range Equation: 1.RADAR range equation relates the range of a RADAR to the chara. Of Tx, Rx, Antenna, target & environment. 2.Free space means RADAR and target are isolated in ... is no obstacle between RADAR antenna & the target. 4.There will be No absorption of EM waves.

Description : Write example of each type (i) Primary transducer (ii) Active transducer (iii) Electrical transducer (iv) Digital transducer

Last Answer : (i) Active transducer:-Thermocouple, piezoelectric, photovoltaic cell (ii) Primary transducer:- Bourdon tube, bellows, (iii) Electrical transducer.:- LVDT,RVDT, Hall effect, strain gauge, ... , optical pyrometer, radiation pyrometer (iv) Digital transducer:- Linear Encoder, digital taco generator

Description : State principle of operation of piezo-electric transducer. State its application.

Last Answer : The piezoelectric element used for converting mechanical movement into electric signals. The mechanical deformation generates charges and this charge appears as a voltage across the electrodes.  ... destructive test (NDT) equipments 6. Piezoelectric materials are used in ultrasonic transducers. 

Description : State the necessity of transducer.

Last Answer : Necessity of Transducer: Input quantity for most of the Instrumentation systems is non - electrical quantity. To convert non- electrical quantities like heat, pressure, level, flow rate, ... use electrical methods and techniques for measurement, manipulation and control, transducers are required.

Description :  A pulse radar has a pulse repetition frequency (PRF) of 3 KHz. If the radar is emitting at 10 GHz, what is the maximum unambiguous range for this radar? A) 5 Km B) 5 m C) 50 Km D) 15 m 

Last Answer :  A pulse radar has a pulse repetition frequency (PRF) of 3 KHz. If the radar is emitting at 10 GHz, what is the maximum unambiguous range for this radar? A) 5 Km B) 5 m C) 50 Km D) 15 m 

Description : A pulse compression radar transmits an encoded pulse having a frequency chirp from 990 MHz to 1010 MHz centred around 1 GHz. The range resolution capability of this radar is A) 7.5 m B) 7.5 Km C) 75 m D) 750 m 

Last Answer : A pulse compression radar transmits an encoded pulse having a frequency chirp from 990 MHz to 1010 MHz centred around 1 GHz. The range resolution capability of this radar is 7.5 m

Description : RADAR is an acronym for: A) Radio Detection and Repulsion B) Radio Device and Ranging C) Radio Detection and Ranging D) Ranging Detection and Retrieve

Last Answer : RADAR is an acronym for: Radio Detection and Ranging

Description : Define transducer. Give two examples.

Last Answer : Transducer - It converts one form of signal into another form. A transducer is a device that is used to convert a physical quantity into its corresponding electrical signal.  Classification - 1. Active transducer 2. Passive transducer 

Description : Define transducer. State factors which are considered while selecting transducer for a particular application.

Last Answer : Transducer - It converts one form of signal into another form. A transducer is a device that is used to convert a physical quantity into its corresponding electrical signal. ... compatibility : The transducer should maintain input and output characteristic for the selected environmental condition.

Description : Define Analog Transducer and give examples of it

Last Answer : Analog Transducer: An analog transducer is a device that converts the input signal into a continuous DC signal of voltage or current. Examples: * Strain gauge * L.V.D.T * Thermocouple * Thermistor

Description : Piezoelectric Transducer is used to measure  (1) displacement (2) resistance (3) current (4) temperature

Last Answer : Piezoelectric Transducer is used to measure displacement 

Description : The transducer with negative temperature co-efficient of resistance is (A) Thermistor (B) Resistance Thermometer (C) Strain Gauge (D) Thermocouple

Last Answer : The transducer with negative temperature co-efficient of resistance is Thermistor

Description : What is a transducer and how does it work?

Last Answer : An electronic device that converts one form of energy to another form.for example a transducer is used in microphone to convert speech signals to electrical signal.on the other hand,transducer is used to convert an electrical signal to speech signals in speakers.

Description : List the different level measurement methods. 

Last Answer : Liquid Level Measurement Direct method 1. Hook type 2. Sight glass gype 3. Float type 4. Dip stick Indirect method 1. Hydraustatic pressure type 2. Electrical type a) Capacitance level indicator b) Radiation level detector c) Ultrasonic level gauge 3. Radar type

Description : List standard voltage level used in India. 

Last Answer : Standard voltage level used in India: * Generation Voltage : 3.3KV, 6.6KV,11KV and 17.5 KV,21KV (Now a days generation voltage is in the range of 11KV- 33KV) * Primary Transmission voltage :- 220 ... voltages in India are 765 KV (750KV), 400KV, 220KV, 132KV, 110KV, 66KV, 33KV, 22KV, 11KV.

Description : A circuit that binds the upper or lower extreme of a waveform to a fixed DC voltage level is called ______ A) DC voltage restorer B) Clamping circuit C) Both A and B D) None of these

Last Answer : A circuit that binds the upper or lower extreme of a waveform to a fixed DC voltage level is called ______ A) DC voltage restorer B) Clamping circuit C) Both A and B D) None of these

Description : How to Use a Level

Last Answer : How to Use a Level Do it yourself tasks such as framing a door, hanging a picture, or installing a chair rail, will turn out great if you use a level. This handy tool makes sure that the surface you ... is a must handyman. Just learn how to use it properly, and all do-it-yourself tasks will be easy.

Description : How to Use a Laser Level

Last Answer : How to Use a Laser Level Compared to the ordinary level, a laser level is more efficient and easier to use. It projects a laser beam forward, making sure the measurements for the project you ... quicker and more efficiently. Just remember these steps and tips when you're working with this tool.

Description : How to Test Soil pH Level

Last Answer : How to Test Soil pH Level Every good gardener knows that one of the key players in getting healthy plants is the quality of the soil. It's important to know your soil's chemistry, especially ... right readings. If you enjoyed reading this article, you might as well read how to garden organically.

Description : How to Level a Yard

Last Answer : How to Level a Yard Leveling a yard is a time consuming task. To free yourself from problems and save time doing the job, your first task should be to decide on the equipment you plan to ... the land. Check your drainage plan, and make sure that the elevation doesn't cause any drainage problems.

Description : How to Check Your Windshield Washer Fluid Level

Last Answer : How to Check Your Windshield Washer Fluid Level Rain, sleet, or snow will not keep you from driving your car on a daily basis. Dust, pollution, and smoke will not keep you from driving ... mixed with the water to prevent the wiper blades from hardening and causing streaks on the windshield glass.

Description : How to Check Your Car’s Oil Level

Last Answer : How to Check Your Car's Oil Level Next to fuel and water, oil is the lifeblood of your car. Checking the quality and the level of oil in your car is a very important part of regular automobile ... and steps, checking oil does not have to cost you anything at the auto repair shop or gas station.

Description : How to Level a Concrete Slab Before Flooring ?

Last Answer : How to Level a Concrete Slab Before Flooring This is a project that shouldn't be too difficult to tackle. Leveling a concrete slab should be done when it's not too cold outside or raining, since ... as necessary to match the surrounding concrete. Stay off the floors for at least 12 to 24 hours.

Description : Describe the need of level measurements.

Last Answer : In almost all industries, vast quantities of liquid such as water ,solvents, chemicals etc. are used in number of processes. It is widely employed to monitor as well as measure ... and therefore its measurement becomes important in a variety of processes encountered in modern manufacturing plants.

Description : Enlist the luminaries used in factory lighting and lux level required in various areas.

Last Answer : Area Luminaries Lux level Office building Fluorescent tube, LED, CFL 500 lux Testing centre Fluorescent tube, LED, CFL 400 to 500 lux Workshop/work place Halogen ... , LED, CFL, Projector lamp, filament lamp, Halogen Lamp, Metal Halide lamp etc Above 600 Lux

Description : In a single crystal of an intrinsic semiconductor, the number of free carriers at the Fermi level at room temperature is: A) Half the total number of electrons in the crystal B) Zero C) Half the number of atoms in the crystal D) Half the number of free electrons in the crystal

Last Answer : In a single crystal of an intrinsic semiconductor, the number of free carriers at the Fermi level at room temperature is: Zero 

Description : Describe different RT level computational and sequential components used to design single function processors.

Last Answer : RT-level combinational components:- To reduce the complexity in digital logic, combinational components are used, which are more powerful than logic gates.  Such combinational ... during a clock edge. An asynchronous inputs value effects the circuit independent of the clock.

Last Answer : In a level compounded D.C. generator, full load terminal voltage is equal to no-load terminal voltage.

Description : Write any two advantages of MI type instrument.

Last Answer : Advantages of MI Type Instrument: 1. These are robust in construction. 2. Used for both A.C. as well as D.C. measurements. 3. These are economical. 4. These possess high operating torque 5. These are simple in construction hence can be easily handled.

Description : State advantages of rotating field type alternators. 

Last Answer : Advantages of Rotating Field Type Alternator: 1) For high-voltage alternator, large space is required to accommodate conductors with insulation, as high voltage is induced in them. If field poles are placed ... is kept rotating. 8) Rotating field is comparatively light and can run with high speed. 

Description : List any four errors in induction type energy meter. Give method of compensation for each.

Last Answer : Errors in Induction Type Energy Meter with their Compensation:  1) Error due to friction: This error can be compensated by the additional shading band provided on the shunt electromagnet.  2) Phase ... error: This error can be compensated by providing a flux diverter' to the current magnet. 

Description : An accelerometer has input range of 0 to 10g, natural frequency 30 Hz and mass 0.001 kg. The range of the secondary displacement transducer in mm required to cover the input range is (A) 0 to 2.76 (B) 0 to 9.81 (C) 0 to 11.20 (D) 0 to 52.10

Last Answer : An accelerometer has input range of 0 to 10g, natural frequency 30 Hz and mass 0.001 kg. The range of the secondary displacement transducer in mm required to cover the input range is 0 to 2.76

Description : Explain construction & working of attraction type M.I. instrument with neat diagram.

Last Answer : 1. Moving element: a small piece of soft iron in the form of a vane or rod.  2. In Attracted type a cylindrical coil or solenoid which is kept fixed. An oval-shaped soft-iron piece are ...   9. When = the pointer will be stable & we can get correct reading of the electrical quantity

Description : Explain construction & working of electrodynamometer type wattmeter.

Last Answer : Electrodynamometer Type Wattmeter:  Construction: It essentially consists of the fixed and moving coil. The fixed coil is split into two equal parts which are placed close together and parallel to each other. ... hence these instruments can be used for measurement of A.C. & D.C. power.

Description : State two applications of : (i) PVC paper (ii) Porcelain with type of class based on withstand temperature is insulating material. 

Last Answer :  (i) Application of PVC paper : 1. It is used in slot lining or motor winding insulation purpose 2. For Insulation of Transformer winding (ii) Application of Porcelain : 1. Mainly used for manufacturing ... on withstand temperature : * H' & C' Class of insulation i e. 180° and above 180°C 

Description : State the type of insulating materials under Class Y and Class B.

Last Answer : The type of insulating materials under Class Y : 1. Cotton  2. Silk 3. Paper 4. Rubber 5. PVC The type of insulating materials under Class B: 1. Backelite 2. Impregnated varnish 3. Mica 4. Fiber glass 5. Asbestos 

Description : State the function and shape of following parts used in induction type energy meter: i) Series magnet ii) Shunt magnet iii) Al disc iv) Brake magnet

Last Answer : i) Series magnet: produce flux proportional to current (load current) of circuit and interact in the aluminum disc with flux produced by voltage magnet for torque production. Its shape is like letter U.  ii) ... : brakes the motion of the aluminum disc or slows it down. Its shape is like letter C. 

Description : State the effects of errors in dynamometer type wattmeter due to i) pc- inductance ii) pc- capacitance iii) mutual inductance iv) Connection.

Last Answer : Errors in wattmeter:  i) pc - inductance: Pressure coil inductance causes wattmeter to read more power than actual .  ii) pc-capacitance: The wattmeter reads less power.  iii) ... iv) Connection: In uncompensated wattmeter , the reading of wattmeter includes the powerloss in coils. 

Description : operating principle of condenser type microphone with neat diagram.

Last Answer : Principle: When sound pressure moves the diapharam in, the capacitance increases, and when it moves out, the capacitance decreases. The change in capacitance results in change in out put voltage of microphone. ... in volts.  Q= charge in coulombs  C= capacitance in farad Diagram: 

Description : Describe the working principle of photoelectric pickup type tacho-generator.

Last Answer : Working: Working principle: The light passes through the holes available on the rotating disc with a specific interval, depends on the angular speed of disc having equidistant holes. The frequency of this light pulses ... by N=f/HS  N=speed  f=frequency  Hs=holes on the disc

Description : Blackt Electrotech 230V 24x7 Energy Saving Socket Type Digital Programmable Plastic Electronic Timer (White)

Last Answer : Buy from amazon: https://amzn.to/2SUTSdv Buy: http://bit.ly/2ZqlAkS

Description : Describe principle of operation of Doppler type ultrasonic flow meter with diagram. 

Last Answer : Diagram: Working:  The flow meter consists of a crystal transducer mounted outside the pipe in which flow is to be measured. This transducer is a piezoelectric crystal which ... , so the frequency of the reflected wave is shifted to particle velocity, according to Doppler principle.

Description : Draw the diagram and explain the working of ferrodynamic type frequency meter. 

Last Answer : Ferrodynamic type frequency meter: (Electrical resonance type frequency meter): It consists of a fixed coil. The supply whose frequency is to be measured is connected across it. This coil ... so selected that the moving coil takes up a convenient position when frequency is of normal value. 

Description : Explain the essential toques in analog type measuring instruments.

Last Answer : List of torques in analog instruments:  1. Deflecting torque  2. Controlling / Restraining torque.  3. Damping torque.  1. Deflecting torque: To create deflection proportional to ... the speed higher will be the damping torque bringing the pointer to the equilibrium position quickly. 

Description : With neat sketch explain working of Weston type synchroscope.

Last Answer : Weston type synchroscope:  Working: It consists of three limbed transformer. The winding on one of the outer limbs is excited from bus- bars and that on other limb by incoming machine. The two fluxes ... the lamp is flickering at a very much slow rate and it is at its maximum brightness.

Description : With a neat sketch explain working of 1 phase dynamometer type power factor meter.

Last Answer : Working of 1 phase dynamometer type power factor meter : The current coil is connected in series with load. Two pressure coils marked as A and B are connected across the supply terminals ... becomes stationary and the pointer shows steady deflection corresponding to the power factor of the load.