Description : Standard Ethernet (10-Mbps) uses_______ encoding A) NRZ B) AMI C) Manchester D) differential Manchester
Last Answer : Manchester
Description : Which encoding method uses alternating positive and negative values for1s? A) NRZ-I B) RZ C) Manchester D) AMI
Last Answer : AMI
Description : Which of the following encoding methods does not provide for synchronization? A) NRZ-L B) RZ C) NRZ-I D) Manchester
Last Answer : NRZ-L
Description : The transmission signal coding method of TI carrier is called a. Bipolar b. NRZ c. Manchester d. Binary
Last Answer : Bipolar
Description : In_______encoding, we use three levels: positive, zero, and negative. A) unipolar B) bipolar C) polar D) none of the above
Last Answer : bipolar
Description : In______ schemes, the voltagesare on the both sidesof the time axis. Forexample, thevoltage level for 0 can bepositive and thevoltage level for 1 can be negative. A) polar B) bipolar C) unipolar D) all of theabove
Last Answer : polar
Description : Ina _____scheme,all the signal levels are onone sideof the time axis,either above or below. A) polar B) bipolar C) unipolar D) all of theabove
Last Answer : unipolar
Description : The transformer signal coding method for T1 carrier is A. Binary B. NRZ C. Manchester D. Bipolar
Last Answer : D. Bipolar
Description : 100Base-T4 uses________line coding. A) NRZ B) 8B6T C) MLT-3 D) Manchester
Last Answer : 8B6T
Description : The minimum bandwidth of Manchester and differential Manchester is ____that of NRZ. A) the sameas B) twice C) thrice D) none of the above
Last Answer : twice
Description : The idea of RZ andthe ideaof NRZ-I are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)
Last Answer : differential Manchester
Description : The idea of RZ andthe ideaof NRZ-L are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)
Description : Two common scramblingtechniques are ________. A) NRZ and RZ B) AMI and NRZ C) B8ZS and HDB3 D) Manchester and differential Manchester
Last Answer : B8ZS and HDB3
Description : We cansay thata packet switchhas _______ typesof components. A) two B) three C) four D) none of the above
Last Answer : four
Description : 1000Base-SX, 1000Base-LX, and 1000Base-CX use _________ block coding and ________ line coding. A) 4B/5B; NRZ B) 8B/10B; NRZ C) 4B/5B; MLT-3 D) 8B/10B; NRZ
Last Answer : 8B/10B; NRZ
Description : In Manchester anddifferential Manchester encoding, the transition at the middle of the bit is usedfor __________. A) bit transfer B) baud transfer C) synchronization D) none of the above
Last Answer : synchronization
Description : _____ encoding has a transition at the beginning of each 0 bit. A) RZ B) Manchester C) Differential Manchester D) All the above
Last Answer : Differential Manchester
Description : _____ encoding has a transition at the middle of each bit. A) RZ B) Manchester C) Differential Manchester D) All the above
Last Answer : All the above
Description : In Ethernet when Manchester encoding is used, the bit rate is: a. Half the baud rate. b. Twice the baud rate. c. Same as the baud rate. d. None of the above
Last Answer : a. Half the baud rate.
Description : 100Base-FX uses_________ block coding and ________ linecoding. A) 4B/5B; NRZ-I B) 8B/10B; NRZ C) 4B/5B; MLT-3 D) 8B/10B; NRZ
Last Answer : 4B/5B; NRZ-I
Description : 100Base-TX uses_________ block coding and ________ linecoding. A) 4B/5B; NRZ B) 8B/10B; NRZ C) 4B/5B; MLT-3 D) 8B/10B; NRZ
Last Answer : 4B/5B; MLT-3
Description : Is BJT unipolar or bipolar Why?
Last Answer : Bipolar Junction Transistor (BJT) is a bipolar device because current is carried by both holes and electrons hence it is called bipolar.
Last Answer : IGBT is a bipolar device.
Description : The sharing of a medium and its link by two or more devices is called _______. A) modulation B) encoding C) line discipline D) multiplexing
Last Answer : multiplexing
Description : Which ports connect special typesof music instruments tosound cards ? (A) BUS (B) CPU (C) USB (D) MIDI (E) MINI
Last Answer : USB
Description : What are the four widely used variations of the NRZ encoding method?
Last Answer : a. Non-return-to-zero level (NRZ-L). b. Enhanced non-return-to-zero level (E-NRZ-L). c. Non-return-to-zero mark (NRZ-M). d. Non-return-to-zero space (NRZ-S).
Description : In Manchester encoding, does a low-to-high light level transition occurring in the middle of the bit duration represent a binary 1 or a binary 0?
Last Answer : Binary 0.
Description : In______, the changeor lackof change in the level of the voltagedetermines the value of the bit. A) NRZ-I B) NRZ-L C) both (a)and (b) D) neither (a) nor (b)
Last Answer : NRZ-I
Description : In_____, the level of the voltagedetermines the valueof the bit. A) NRZ-I B) NRZ-L C) both (a) and (b) D) neither (a) nor (b)
Description : _______ isnormally referred toas mB/nB coding; it replaceseach m-bit group with an n-bit group. A) Block coding B) Line coding C) Scrambling
Last Answer : Block coding
Description : 1000Base-T uses________line coding. A) 4D-PAM5 B) 8B6T C) MLT-3 D) Manchester
Last Answer : 4D-PAM5
Description : In___________ thereis alwaysa transition at the middle of the bit, but thebit values are determined at the beginningof the bit. If the nextbit is 0, there is a transition; if the next bit is 1, there is none. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)
Description : In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit ... Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)
Last Answer : both (a) and (b)
Description : In ATM, the _____ layer defines thetransmission medium,bit transmission,encoding, and electrical-to-optical transformation. A) physical B) ATM layer C) AAL D) none of the above
Last Answer : physical
Description : The ASCII encoding of binary data is called a. base 64 encoding b. base 32 encoding c. base 16 encoding d. base 8 encoding
Last Answer : a. base 64 encoding
Description : In the MIME header field, ____describes how the object within the body was encoded in order that it be included in the message using a mail-safe form. a. content-type b. content-transfer-encoding c. content-description d. content-id
Last Answer : b. content-transfer-encoding
Description : In the MIME header field____describes how the object within the body is to be interpreted. a. content-type b. content-transfer-encoding c. content-description d. content-id
Last Answer : a. content-type
Description : In block coding, if k =2 and n =3, we have _______ invalid codewords. A) 8 B) 4 C) 2 D) none of the above
Last Answer : 2
Description : To guarantee the detectionof up to 5errors in all cases, the minimum Hamming distance in a block code mustbe _______. A) 5 B) 6 C) 11 D) none of the above
Last Answer : 6
Description : The number of addresses in a class A block is _______. A) 65,534 B) 16,777,216 C) 256 D) none of the above
Last Answer : 16,777,216
Description : The number of addresses in a class B block is _______. A) 65,536 B) 16,777,216 C) 256 D) none of the above
Last Answer : 65,536
Description : The number of addresses in a class C block is _______. A) 65,534 B) 16,777,216 C) 256 D) none of the above
Last Answer : 256
Description : To guarantee the detection of up to 5 errors in all cases, the minimum Hamming distance in a block code must be _______ A. 5 B. 6 C. 11 D. none of the above
Last Answer : B. 6
Description : How can the loss of timing occur in NRZ line coding?
Last Answer : If long strings of 1s or 0s are present causing a lack of level transitions.
Description : Why JFET is called a unipolar transistor?
Last Answer : In JFET, the current conduction is either by electrons or holes and controlled by means of an electric field between the gate electrode and the conducting channel of the device, So it is called as a unipolar transistor.
Description : The following statement about lithium is not correct: A. It has a sedative action in normal individuals B. It controls mania, but takes 1-2 weeks to produce the effect C. ... recurrent unipolar depression D. It can be combined with tricyclic antidepressants for refractory cases of major depression
Last Answer : A. It has a sedative action in normal individuals
Description : Compare between BJT and FET on the basis of (i) Biolar/Unipolar (ii) Tharmal Runaway (iii) Noise (iv) Applications
Last Answer : Parameter BJT FET Bipolar/Unipolar It is bipolar device i.e. current in this device is carried by electrons and holes. It is unipolar device i.e. current ... in oscilloscopes, electronic voltmeters and other measuring and testing equipment because of their high input impedance.
Description : Explain DC coupled drive circuit with unipolar output.
Last Answer : DC coupled drive circuit with unipolar output: The figure shows the circuit and waveforms
Description : In ________, we combine signals from different sources to fit into a larger bandwidth. A) spread spectrum B) line coding C) block coding D) none of the above
Last Answer : spread spectrum
Description : ______ provides synchronization without increasingthe number of bits. A) Scrambling B) Line coding C) Block coding D) None of the above
Last Answer : Scrambling