The ________ rate defines thenumber of dataelements sent in1s; the______ rate is the numberof signalelements sent in 1s. A) data; signal B) signal; data C) baud; bit D) none of the above

The ________ rate defines thenumber of dataelements sent in1s; the______ rate is the numberof signalelements sent in 1s.
A)
data; signal
B)
signal; data
C)
baud; bit
D)
none of the above
by

1 Answer

Answer :

data; signal
by

Related questions

The data rate is sometimes calledthe ___ rate. A) baud B) bit C) signal D) none of the above

Description : The data rate is sometimes calledthe ___ rate. A) baud B) bit C) signal D) none of the above

Last Answer : bit

The signal rate is sometimes called the ____ rate. A) baud B) bit C) signal D) none of the above

Description : The signal rate is sometimes called the ____ rate. A) baud B) bit C) signal D) none of the above

Last Answer : baud

An analog signal carries 4 bits in each signal unit. If 1000 signal units are sent per second, then baud rate and bit rate of the signal are ............... and .............. (A) 4000 bauds \ sec & 1000 bps (B) 2000 bauds \ sec & 1000 bps (C) 1000 bauds \ sec & 500 bps (D) 1000 bauds \ sec & 4000 bps

Description : An analog signal carries 4 bits in each signal unit. If 1000 signal units are sent per second, then baud rate and bit rate of the signal are ............... and .............. (A) 4000 bauds \ sec & ... (B) 2000 bauds \ sec & 1000 bps (C) 1000 bauds \ sec & 500 bps (D) 1000 bauds \ sec & 4000 bps

Last Answer : (D) 1000 bauds \ sec & 4000 bps Explanation: Bit rate is the number of bits per second. Baud rate is the number of signal units per second. Baud rate is less than or equal to the bit rate. Baud rate = 1000 bauds per second (baud/s) Bit rate = 1000 x 4 = 4000 bps

How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

In Frame Relay, the EA field defines thenumber of bytes; it is _____ in the last byte of the address. A) 0 B) 1 C) 2 D) 3

Description : In Frame Relay, the EA field defines thenumber of bytes; it is _____ in the last byte of the address. A) 0 B) 1 C) 2 D) 3

Last Answer : 1

An analog signal has a bit rate of 6000 bps and a baud rate of 2000 baud. How many data elements are carried by each signal element ? (A) 0.336 bits/baud (B) 3 bits/baud (C) 120,00,000 bits/baud (D) None of the above

Description : An analog signal has a bit rate of 6000 bps and a baud rate of 2000 baud. How many data elements are carried by each signal element ? (A) 0.336 bits/baud (B) 3 bits/baud (C) 120,00,000 bits/baud (D) None of the above

Last Answer : (B) 3 bits/baud

In Ethernet when Manchester encoding is used, the bit rate is: a. Half the baud rate. b. Twice the baud rate. c. Same as the baud rate. d. None of the above

Description : In Ethernet when Manchester encoding is used, the bit rate is: a. Half the baud rate. b. Twice the baud rate. c. Same as the baud rate. d. None of the above

Last Answer : a. Half the baud rate.

How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

The baud rate of a signal is 600 baud/second. If each signal unit carries 6 bits, then the bit rate of a signal is ................. (A) 3600 (B) 100 (C) 6/600 (D) None of the above

Description : The baud rate of a signal is 600 baud/second. If each signal unit carries 6 bits, then the bit rate of a signal is ................. (A) 3600 (B) 100 (C) 6/600 (D) None of the above

Last Answer : (A) 3600 

In Manchester anddifferential Manchester encoding, the transition at the middle of the bit is usedfor __________. A) bit transfer B) baud transfer C) synchronization D) none of the above

Description : In Manchester anddifferential Manchester encoding, the transition at the middle of the bit is usedfor __________. A) bit transfer B) baud transfer C) synchronization D) none of the above

Last Answer : synchronization

If the bit rate for an FSK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200

Description : If the bit rate for an FSK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200

Last Answer : 1200

f the bit rate for an ASK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200

Description : f the bit rate for an ASK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200

Last Answer : 1200

With anIP address set starting with 150, you currently havesix offices that you are treating as subnets. Plans are in place toopen 10 more officesbefore the end of theyear. What subnet mask should you useto satisfy the needed numberof subnets and maximize thenumberof hosts available at eachsite? A. 192 B. 224 C. 240 D. 248 E. 252

Description : With anIP address set starting with 150, you currently havesix offices that you are treating as subnets. Plans are in place toopen 10 more officesbefore the end of theyear. What subnet mask should you useto ... maximize thenumberof hosts available at eachsite? A. 192 B. 224 C. 240 D. 248 E. 252

Last Answer : 248

In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Last Answer : asynchronous

For a ______ channel, the Nyquist bit rate formula defines thetheoretical maximum bit rate. A) noisy B) noiseless C) bandpass D) low-pass

Description : For a ______ channel, the Nyquist bit rate formula defines thetheoretical maximum bit rate. A) noisy B) noiseless C) bandpass D) low-pass

Last Answer : noiseless

In modulo-2 arithmetic, we use the______ operationfor bothaddition and subtraction. A) XOR B) OR C) AND D) none of the above

Description : In modulo-2 arithmetic, we use the______ operationfor bothaddition and subtraction. A) XOR B) OR C) AND D) none of the above

Last Answer : XOR

Find thenumber of addresses in ablock of classless addresses if one of theaddresses is 12.2.2.7/30. A) 2 B) 4 C) 8 D) none of the above

Description : Find thenumber of addresses in ablock of classless addresses if one of theaddresses is 12.2.2.7/30. A) 2 B) 4 C) 8 D) none of the above

Last Answer : 4

Find thenumber of addresses in ablock of classless addresses if one of theaddresses is 12.2.2.7/24. A) 32 B) 64 C) 256 D) none of the above

Description : Find thenumber of addresses in ablock of classless addresses if one of theaddresses is 12.2.2.7/24. A) 32 B) 64 C) 256 D) none of the above

Last Answer : 256

In IPv4, what is needed to determine thenumber of the last byte of a fragment? A) Identification number B) Offset number C) Total length D) (b) and (c)

Description : In IPv4, what is needed to determine thenumber of the last byte of a fragment? A) Identification number B) Offset number C) Total length D) (b) and (c)

Last Answer : (b) and (c)

When propagationspeed is multiplied by propagation time, we get the ________. A) throughput B) wavelength of thesignal C) distortionfactor D) distancea signal or bit has traveled

Description : When propagationspeed is multiplied by propagation time, we get the ________. A) throughput B) wavelength of thesignal C) distortionfactor D) distancea signal or bit has traveled

Last Answer : distancea signal or bit has traveled

The cash bag should always be sent to the account office by the BPM enclosed on the______ a) BO daily account b) SO daily account c) BO Slip d) SO slip

Description : The cash bag should always be sent to the account office by the BPM enclosed on the______ a) BO daily account b) SO daily account c) BO Slip d) SO slip

Last Answer : a) BO daily account

What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) Baud C) Bits per second D) Both B and C

Description : What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) Baud C) Bits per second D) Both B and C

Last Answer : B) Baud

Is the total useful information processed or communicated over a specific amount of time A. Baud rate B. Bit rate C. Information theory D. Throughput

Description : Is the total useful information processed or communicated over a specific amount of time A. Baud rate B. Bit rate C. Information theory D. Throughput

Last Answer : D. Throughput

Define (i)Bit rate (ii)Baud rate

Description : Define (i)Bit rate (ii)Baud rate

Last Answer : (i)Bit rate :- Bit rate is simply the number of bits transmitted during one second and is expressed in bits per second (bps). Mathematically bit rate is given by:- Rb =1 / Tb where Tb is time ... 1 / Ts Where, baud rate = symbol rate (symbols per second) and Ts = time interval of one symbol.

In ATM, the _____ layer defines thetransmission medium,bit transmission,encoding, and electrical-to-optical transformation. A) physical B) ATM layer C) AAL D) none of the above

Description : In ATM, the _____ layer defines thetransmission medium,bit transmission,encoding, and electrical-to-optical transformation. A) physical B) ATM layer C) AAL D) none of the above

Last Answer : physical

In IPv6, the ________ prefix defines the purpose of the address. A) type B) purpose C) both a and b D) none of the above

Description : In IPv6, the ________ prefix defines the purpose of the address. A) type B) purpose C) both a and b D) none of the above

Last Answer : type

If the baudrate fora 64-QAM signal is 2000, what is the bit rate? A) 300 B) 400 C) 1000 D) 12000

Description : If the baudrate fora 64-QAM signal is 2000, what is the bit rate? A) 300 B) 400 C) 1000 D) 12000

Last Answer : 12000

If the bit rate for a16-QAM signal is 4000 bps, what is the baudrate? A) 300 B) 400 C) 1000 D) 1200

Description : If the bit rate for a16-QAM signal is 4000 bps, what is the baudrate? A) 300 B) 400 C) 1000 D) 1200

Last Answer : 1000

The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Description : The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Last Answer : DSSS

The _____schemeuses data patterns of size 2 and encodes the 2-bit patterns as one signal element belonging to a four-level signal. A) 4B5B B) 2B1Q C) MLT-3 D) none of the above

Description : The _____schemeuses data patterns of size 2 and encodes the 2-bit patterns as one signal element belonging to a four-level signal. A) 4B5B B) 2B1Q C) MLT-3 D) none of the above

Last Answer : 2B1Q

If the baudrate is400 for a QPSK signal, thebit rate is ________ bps. A) 100 B) 400 C) 800 D) 1600

Description : If the baudrate is400 for a QPSK signal, thebit rate is ________ bps. A) 100 B) 400 C) 800 D) 1600

Last Answer : 800

What is used to identify whether a data word has an odd or even number of 1’s ? (1) Carry bit (2) Sign bit (3) Zero bit (4) Parity bit

Description : What is used to identify whether a data word has an odd or even number of 1’s ? (1) Carry bit (2) Sign bit (3) Zero bit (4) Parity bit

Last Answer : Parity bit

A 8-Mbps tokenring has atoken holding timer value of 10 msec. What is the longest frame (assumeheader bits are negligible) that canbe sent on this ring? A. 8000 B frame B. 80,000 B frame C. 8 x 105 bit frame D. 10,000 B frame

Description : A 8-Mbps tokenring has atoken holding timer value of 10 msec. What is the longest frame (assumeheader bits are negligible) that canbe sent on this ring? A. 8000 B frame B. 80,000 B frame C. 8 x 105 bit frame D. 10,000 B frame

Last Answer : 10,000 B frame

Bits can be sent over guided and unguided media as analog signal by ___________ a. digital modulation b. amplitude modulation c. frequency modulation d. phase modulation

Description : Bits can be sent over guided and unguided media as analog signal by ___________ a. digital modulation b. amplitude modulation c. frequency modulation d. phase modulation

Last Answer : a. digital modulation

The rate for a discrete source is simply the______. a. Entropy b. Loss c. Noise d. Distortion

Description : The rate for a discrete source is simply the______. a. Entropy b. Loss c. Noise d. Distortion

Last Answer : a. Entropy

In Ethernet addressing, ifall the bits are 1s, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Description : In Ethernet addressing, ifall the bits are 1s, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : broadcast

What is the main function of Session layer in OSI model? a. Defines how data is formatted between the devices b. Made physical connection between server and client c. Both a and b d. None of the above

Description : What is the main function of Session layer in OSI model? a. Defines how data is formatted between the devices b. Made physical connection between server and client c. Both a and b d. None of the above

Last Answer : a. Defines how data is formatted between the devices

The x.25 standard specifies a a. technique for start-stop data b. technique for dial access c. DTE/DCE interface d. data bit rate e. none of above

Description : The x.25 standard specifies a a. technique for start-stop data b. technique for dial access c. DTE/DCE interface d. data bit rate e. none of above

Last Answer : DTE/DCE interface

A ________receivesa signal and,before it becomes too weak or corrupted, regenerates the original bit pattern. It thensends the refreshed signal. A) passive hub B) repeater C) bridge D) router

Description : A ________receivesa signal and,before it becomes too weak or corrupted, regenerates the original bit pattern. It thensends the refreshed signal. A) passive hub B) repeater C) bridge D) router

Last Answer : repeater

Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Description : Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Last Answer : d. 256

Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Description : Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Last Answer : c. 464

The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above

Description : The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above

Last Answer : multicast group

A ________ is a 16-bit number used by the host-to-host protocol to identify to which higher- level protocol or application program (process) it must deliver incoming messages A. connection B. UDP C. port D. TCP

Description : A ________ is a 16-bit number used by the host-to-host protocol to identify to which higher- level protocol or application program (process) it must deliver incoming messages A. connection B. UDP C. port D. TCP

Last Answer : C. port

In synchronous TDM, forn signal sources of the same data rate, eachframe contains _______ slots. A) n B) n + 1 C) n- 1 D) 0to n

Description : In synchronous TDM, forn signal sources of the same data rate, eachframe contains _______ slots. A) n B) n + 1 C) n- 1 D) 0to n

Last Answer : n

Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Last Answer : d. 20000

Determine the maximum length of the cable (in km) for transmitting data at a rate of 500 Mbps in an Ethernet LAN with frames of size 10,000 bits. Assume the signal speed in the cable to be 2,00,000 km/s.b. 2 c. 2.5 d. 5

Description : Determine the maximum length of the cable (in km) for transmitting data at a rate of 500 Mbps in an Ethernet LAN with frames of size 10,000 bits. Assume the signal speed in the cable to be 2,00,000 km/s. b. 2 c. 2.5 d. 5

Last Answer : b. 2

The ________ modeprovides synchronizationfor the entire stream of bits must. In other words, it guarantees that the data arrive ata fixed rate. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : The ________ modeprovides synchronizationfor the entire stream of bits must. In other words, it guarantees that the data arrive ata fixed rate. A) synchronous B) asynchronous C) isochronous D) none of the above

Last Answer : isochronous

1’s complement representation of decimal number of -17 by using 8 bit representation is (A) 1110 1110 (B) 1101 1101 (C) 1100 1100 (D) 0001 0001

Description : 1’s complement representation of decimal number of -17 by using 8 bit representation is (A) 1110 1110 (B) 1101 1101 (C) 1100 1100 (D) 0001 0001

Last Answer : (A) 1110 1110

________ is the process of converting digitaldata to adigital signal. A) Block coding B) Line coding C) Scrambling D) None of the above

Description : ________ is the process of converting digitaldata to adigital signal. A) Block coding B) Line coding C) Scrambling D) None of the above

Last Answer : Line coding