The data rate is sometimes calledthe ___ rate.
A)
baud
B)
bit
C)
signal
D)
none of the above

1 Answer

Answer :

bit

Related questions

Description : The signal rate is sometimes called the ____ rate. A) baud B) bit C) signal D) none of the above

Last Answer : baud

Description : The ________ rate defines thenumber of dataelements sent in1s; the______ rate is the numberof signalelements sent in 1s. A) data; signal B) signal; data C) baud; bit D) none of the above

Last Answer : data; signal

Description : An analog signal has a bit rate of 6000 bps and a baud rate of 2000 baud. How many data elements are carried by each signal element ? (A) 0.336 bits/baud (B) 3 bits/baud (C) 120,00,000 bits/baud (D) None of the above

Last Answer : (B) 3 bits/baud

Description : In Ethernet when Manchester encoding is used, the bit rate is: a. Half the baud rate. b. Twice the baud rate. c. Same as the baud rate. d. None of the above

Last Answer : a. Half the baud rate.

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

Description : The baud rate of a signal is 600 baud/second. If each signal unit carries 6 bits, then the bit rate of a signal is ................. (A) 3600 (B) 100 (C) 6/600 (D) None of the above

Last Answer : (A) 3600 

Description : An analog signal carries 4 bits in each signal unit. If 1000 signal units are sent per second, then baud rate and bit rate of the signal are ............... and .............. (A) 4000 bauds \ sec & ... (B) 2000 bauds \ sec & 1000 bps (C) 1000 bauds \ sec & 500 bps (D) 1000 bauds \ sec & 4000 bps

Last Answer : (D) 1000 bauds \ sec & 4000 bps Explanation: Bit rate is the number of bits per second. Baud rate is the number of signal units per second. Baud rate is less than or equal to the bit rate. Baud rate = 1000 bauds per second (baud/s) Bit rate = 1000 x 4 = 4000 bps

Description : In Manchester anddifferential Manchester encoding, the transition at the middle of the bit is usedfor __________. A) bit transfer B) baud transfer C) synchronization D) none of the above

Last Answer : synchronization

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

Description : The IPv4header field formerly knownas the service type field is now calledthe _______ field. A) IETF B) checksum C) differentiatedservices D) noneof the above

Last Answer : differentiatedservices

Description : What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) Baud C) Bits per second D) Both B and C

Last Answer : B) Baud

Description : Is the total useful information processed or communicated over a specific amount of time A. Baud rate B. Bit rate C. Information theory D. Throughput

Last Answer : D. Throughput

Description : Define (i)Bit rate (ii)Baud rate

Last Answer : (i)Bit rate :- Bit rate is simply the number of bits transmitted during one second and is expressed in bits per second (bps). Mathematically bit rate is given by:- Rb =1 / Tb where Tb is time ... 1 / Ts Where, baud rate = symbol rate (symbols per second) and Ts = time interval of one symbol.

Description : If the baudrate fora 64-QAM signal is 2000, what is the bit rate? A) 300 B) 400 C) 1000 D) 12000

Last Answer : 12000

Description : If the bit rate for a16-QAM signal is 4000 bps, what is the baudrate? A) 300 B) 400 C) 1000 D) 1200

Last Answer : 1000

Description : If the bit rate for an FSK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200

Last Answer : 1200

Description : f the bit rate for an ASK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200

Last Answer : 1200

Description : The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Last Answer : DSSS

Description : The _____schemeuses data patterns of size 2 and encodes the 2-bit patterns as one signal element belonging to a four-level signal. A) 4B5B B) 2B1Q C) MLT-3 D) none of the above

Last Answer : 2B1Q

Description : What is a sum of the data values divided by the number of data items is calledthe?

Last Answer : What is the answer ?

Description : The x.25 standard specifies a a. technique for start-stop data b. technique for dial access c. DTE/DCE interface d. data bit rate e. none of above

Last Answer : DTE/DCE interface

Description : A ________receivesa signal and,before it becomes too weak or corrupted, regenerates the original bit pattern. It thensends the refreshed signal. A) passive hub B) repeater C) bridge D) router

Last Answer : repeater

Description : When propagationspeed is multiplied by propagation time, we get the ________. A) throughput B) wavelength of thesignal C) distortionfactor D) distancea signal or bit has traveled

Last Answer : distancea signal or bit has traveled

Description : Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Last Answer : d. 256

Description : Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Last Answer : c. 464

Description : In synchronous TDM, forn signal sources of the same data rate, eachframe contains _______ slots. A) n B) n + 1 C) n- 1 D) 0to n

Last Answer : n

Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Last Answer : d. 20000

Description : Determine the maximum length of the cable (in km) for transmitting data at a rate of 500 Mbps in an Ethernet LAN with frames of size 10,000 bits. Assume the signal speed in the cable to be 2,00,000 km/s. b. 2 c. 2.5 d. 5

Last Answer : b. 2

Description : The pattern of groups that have odd parity calledthe ses must match one of the of columns in the parity check matrix: a. Syndrome b. Dynodes c. Both d. None of these

Last Answer : a. Syndrome

Description : The ___ bit decides whether it is a system descriptor or code/data segment descriptor a) P b) S c) D d) G

Last Answer : a) P

Description : What is the baud rate in Arduino?

Last Answer : The baud rate in Arduino is the speed at which data is transmitted over a serial port, measured in bits per second (bps).

Description : In serial communication modes, mode 1 the Baud rate = a) BR=2SMOD/32 * (Timer 0 over flow rate) b) BR=2SMOD/16 * (Timer 1 over flow rate) c) BR=2SMOD/16 * (Timer 0 over flow rate) d) BR=2SMOD/32 * (Timer 1 over flow rate)

Last Answer : b) BR=2SMOD/16 * (Timer 1 over flow rate)

Description : What is the baud rate of the standard 10 Mbps Ethernet ? (A) 10 megabaud (B) 20 megabaud (C) 30 megabaud (D) 40 megabaud

Last Answer : (B) 20 megabaud

Description : What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) BaudC) Bits per second D) Both B and C

Last Answer : B) Baud

Description : Black box testing sometimes called ? Data Flow testing Loop Testing Behavioral Testing Graph Based Testing

Last Answer : Behavioral Testing

Description : Black box testing sometimes called ? Data Flow testing Loop Testing Behavioral Testing Graph Based Testing

Last Answer : Behavioral Testing

Description : For a ______ channel, we need to use the Shannon capacity tofind the maximum bit rate. A) noisy B) noiseless C) bandpass D) low-pass

Last Answer : noisy

Description : For a ______ channel, the Nyquist bit rate formula defines thetheoretical maximum bit rate. A) noisy B) noiseless C) bandpass D) low-pass

Last Answer : noiseless

Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps

Last Answer : d. 3200 bps

Description : The data recording format in most of the modern magnetic tape is a. 7-bit ASCII b. 7-bit EBCDIC c. 8-bit ASCII d. 8-bit EBCDIC

Last Answer : 8-bit EBCDIC

Description : High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Last Answer : bit-oriented

Description : Which error detection method consists of just one redundant bit per data unit? A) Simple parity check B) Two-dimensionalparity check C) CRC D) Checksum

Last Answer : Simple parity check

Description : Error detection ata data link level is achieved by A. bit stuffing B. cyclic redundancy codes C. Hamming codes D. equalization

Last Answer : cyclic redundancy codes

Description : the maximum window size for data transmission using the selective reject protocol with n-bit frame sequence numbers is: a. 2^n b. 2^(n-1) c. 2^n – 1 d. 2^(n-2)

Last Answer : b. 2^(n-1)

Description : Bit stuffing refers to a. inserting a 0 in user stream to differentiate it with a flag b. inserting a 0 in flag stream to avoid ambiguity c. appending a nipple to the flag sequence d. appending a nipple to the use data stream

Last Answer : a. inserting a 0 in user stream to differentiate it with a flag

Description : The layer that transmits data in the form of bit streams using electrical and mechanicalsystems is in the OSI model. a. Physical layer b. Transport Layer c. Network Layer d. Data Link Layer

Last Answer : a. Physical layer

Description : In _____coding, we divideour message into blocks, each of k bits, called ___. A) block; blockwords B) linear; datawords C) block; datawords D) none of the above

Last Answer : block; datawords

Description : ___ cable can carry signals ofhigher frequency ranges than_____ cable. A) Twisted-pair; fiber-optic B) Coaxial; fiber-optic C) Coaxial; twisted-pair D) none of the abov

Last Answer : Coaxial; twisted-pair

Description : MSOffice2000 included a full-fledged Web designingsoftwarecalled ___ A. MS Word B. Front Page Express C. FrontPage 2000 D. None of these

Last Answer : FrontPage 2000