In Manchester anddifferential Manchester encoding, the transition at the middle of the bit is usedfor __________. A) bit transfer B) baud transfer C) synchronization D) none of the above

In Manchester anddifferential Manchester encoding, the transition at the middle of the bit is usedfor __________.
A)
bit transfer
B)
baud transfer
C)
synchronization
D)
none of the above
by

1 Answer

Answer :

synchronization
by

Related questions

In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit provides synchronization. A) Manchester B) differential ManchesteC) both (a) and (b) D) neither (a) nor (b)r

Description : In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit ... Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : both (a) and (b)

In Ethernet when Manchester encoding is used, the bit rate is: a. Half the baud rate. b. Twice the baud rate. c. Same as the baud rate. d. None of the above

Description : In Ethernet when Manchester encoding is used, the bit rate is: a. Half the baud rate. b. Twice the baud rate. c. Same as the baud rate. d. None of the above

Last Answer : a. Half the baud rate.

_____ encoding has a transition at the middle of each bit. A) RZ B) Manchester C) Differential Manchester D) All the above

Description : _____ encoding has a transition at the middle of each bit. A) RZ B) Manchester C) Differential Manchester D) All the above

Last Answer : All the above

_____ encoding has a transition at the beginning of each 0 bit. A) RZ B) Manchester C) Differential Manchester D) All the above

Description : _____ encoding has a transition at the beginning of each 0 bit. A) RZ B) Manchester C) Differential Manchester D) All the above

Last Answer : Differential Manchester

In Manchester encoding, does a low-to-high light level transition occurring in the middle of the bit duration represent a binary 1 or a binary 0?

Description : In Manchester encoding, does a low-to-high light level transition occurring in the middle of the bit duration represent a binary 1 or a binary 0?

Last Answer : Binary 0.

In___________ thereis alwaysa transition at the middle of the bit, but thebit values are determined at the beginningof the bit. If the nextbit is 0, there is a transition; if the next bit is 1, there is none. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Description : In___________ thereis alwaysa transition at the middle of the bit, but thebit values are determined at the beginningof the bit. If the nextbit is 0, there is a transition; if the next bit is 1, there is none. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : differential Manchester

Standard Ethernet (10-Mbps) uses_______ encoding A) NRZ B) AMI C) Manchester D) differential Manchester

Description : Standard Ethernet (10-Mbps) uses_______ encoding A) NRZ B) AMI C) Manchester D) differential Manchester

Last Answer : Manchester

Which encoding method uses alternating positive and negative values for1s? A) NRZ-I B) RZ C) Manchester D) AMI

Description : Which encoding method uses alternating positive and negative values for1s? A) NRZ-I B) RZ C) Manchester D) AMI

Last Answer : AMI

Which of the following encoding methods does not provide for synchronizationA)NRZ-LB)RZC)NRZ-ID)Manchester?

Description : Which of the following encoding methods does not provide for synchronization? A) NRZ-L B) RZ C) NRZ-I D) Manchester

Last Answer : NRZ-L

Unipolar, bipolar, and polar encoding are typesof _______ encoding. A) line B) block C) NRZ D) Manchester

Description : Unipolar, bipolar, and polar encoding are typesof _______ encoding. A) line B) block C) NRZ D) Manchester

Last Answer : line

The data rate is sometimes calledthe ___ rate. A) baud B) bit C) signal D) none of the above

Description : The data rate is sometimes calledthe ___ rate. A) baud B) bit C) signal D) none of the above

Last Answer : bit

The signal rate is sometimes called the ____ rate. A) baud B) bit C) signal D) none of the above

Description : The signal rate is sometimes called the ____ rate. A) baud B) bit C) signal D) none of the above

Last Answer : baud

The ________ rate defines thenumber of dataelements sent in1s; the______ rate is the numberof signalelements sent in 1s. A) data; signal B) signal; data C) baud; bit D) none of the above

Description : The ________ rate defines thenumber of dataelements sent in1s; the______ rate is the numberof signalelements sent in 1s. A) data; signal B) signal; data C) baud; bit D) none of the above

Last Answer : data; signal

How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

In ________signaling,a portionof the bandwidthis usedfor signaling and another portionfor data. A) in-band B) out-of-band C) mixed D) none of the above

Description : In ________signaling,a portionof the bandwidthis usedfor signaling and another portionfor data. A) in-band B) out-of-band C) mixed D) none of the above

Last Answer : out-of-band

________ are usedfor short-range communications such as those between a PC and aperipheral device. A) Radio waves B) Microwaves C) Infrared waves D) none of the above

Description : ________ are usedfor short-range communications such as those between a PC and aperipheral device. A) Radio waves B) Microwaves C) Infrared waves D) none of the above

Last Answer : Infrared waves

In ATM, the _____ layer defines thetransmission medium,bit transmission,encoding, and electrical-to-optical transformation. A) physical B) ATM layer C) AAL D) none of the above

Description : In ATM, the _____ layer defines thetransmission medium,bit transmission,encoding, and electrical-to-optical transformation. A) physical B) ATM layer C) AAL D) none of the above

Last Answer : physical

In the MIME header field, ____describes how the object within the body was encoded in order that it be included in the message using a mail-safe form. a. content-type b. content-transfer-encoding c. content-description d. content-id

Description : In the MIME header field, ____describes how the object within the body was encoded in order that it be included in the message using a mail-safe form. a. content-type b. content-transfer-encoding c. content-description d. content-id

Last Answer : b. content-transfer-encoding

In the MIME header field____describes how the object within the body is to be interpreted. a. content-type b. content-transfer-encoding c. content-description d. content-id

Description : In the MIME header field____describes how the object within the body is to be interpreted. a. content-type b. content-transfer-encoding c. content-description d. content-id

Last Answer : a. content-type

Delimiting and synchronization of data exchange is provided by __________ a. Application layer b. Session layerc. Transport layer d. Link layer

Description : Delimiting and synchronization of data exchange is provided by __________ a. Application layer b. Session layer c. Transport layer d. Link layer

Last Answer : b. Session layer

Delimiting and synchronization of data exchange is provided by __________ a. Application layer b. Session layerc. Transport layer d. Link layer

Description : Delimiting and synchronization of data exchange is provided by __________ a. Application layer b. Session layer c. Transport layer d. Link layer

Last Answer : b. Session layer

Delimiting and synchronization of data exchange is provided by __________ a) Application layer b) Session layer c) Transport layer d) Link layer

Description : Delimiting and synchronization of data exchange is provided by __________ a) Application layer b) Session layer c) Transport layer d) Link layer

Last Answer : b) Session layer

What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) Baud C) Bits per second D) Both B and C

Description : What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) Baud C) Bits per second D) Both B and C

Last Answer : B) Baud

How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

Is the total useful information processed or communicated over a specific amount of time A. Baud rate B. Bit rate C. Information theory D. Throughput

Description : Is the total useful information processed or communicated over a specific amount of time A. Baud rate B. Bit rate C. Information theory D. Throughput

Last Answer : D. Throughput

The baud rate of a signal is 600 baud/second. If each signal unit carries 6 bits, then the bit rate of a signal is ................. (A) 3600 (B) 100 (C) 6/600 (D) None of the above

Description : The baud rate of a signal is 600 baud/second. If each signal unit carries 6 bits, then the bit rate of a signal is ................. (A) 3600 (B) 100 (C) 6/600 (D) None of the above

Last Answer : (A) 3600 

An analog signal carries 4 bits in each signal unit. If 1000 signal units are sent per second, then baud rate and bit rate of the signal are ............... and .............. (A) 4000 bauds \ sec & 1000 bps (B) 2000 bauds \ sec & 1000 bps (C) 1000 bauds \ sec & 500 bps (D) 1000 bauds \ sec & 4000 bps

Description : An analog signal carries 4 bits in each signal unit. If 1000 signal units are sent per second, then baud rate and bit rate of the signal are ............... and .............. (A) 4000 bauds \ sec & ... (B) 2000 bauds \ sec & 1000 bps (C) 1000 bauds \ sec & 500 bps (D) 1000 bauds \ sec & 4000 bps

Last Answer : (D) 1000 bauds \ sec & 4000 bps Explanation: Bit rate is the number of bits per second. Baud rate is the number of signal units per second. Baud rate is less than or equal to the bit rate. Baud rate = 1000 bauds per second (baud/s) Bit rate = 1000 x 4 = 4000 bps

An analog signal has a bit rate of 6000 bps and a baud rate of 2000 baud. How many data elements are carried by each signal element ? (A) 0.336 bits/baud (B) 3 bits/baud (C) 120,00,000 bits/baud (D) None of the above

Description : An analog signal has a bit rate of 6000 bps and a baud rate of 2000 baud. How many data elements are carried by each signal element ? (A) 0.336 bits/baud (B) 3 bits/baud (C) 120,00,000 bits/baud (D) None of the above

Last Answer : (B) 3 bits/baud

Define (i)Bit rate (ii)Baud rate

Description : Define (i)Bit rate (ii)Baud rate

Last Answer : (i)Bit rate :- Bit rate is simply the number of bits transmitted during one second and is expressed in bits per second (bps). Mathematically bit rate is given by:- Rb =1 / Tb where Tb is time ... 1 / Ts Where, baud rate = symbol rate (symbols per second) and Ts = time interval of one symbol.

______ provides synchronization without increasingthe number of bits. A) Scrambling B) Line coding C) Block coding D) None of the above

Description : ______ provides synchronization without increasingthe number of bits. A) Scrambling B) Line coding C) Block coding D) None of the above

Last Answer : Scrambling

_____ provides redundancy toensure synchronization and inherent errordetection. A) Block coding B) Line coding C) Scrambling D) None of the above

Description : _____ provides redundancy toensure synchronization and inherent errordetection. A) Block coding B) Line coding C) Scrambling D) None of the above

Last Answer : Block coding

Block coding can help in _______at the receiver. A) Synchronization B) Error detection C) Attenuation D) (a) and (b)

Description : Block coding can help in _______at the receiver. A) Synchronization B) Error detection C) Attenuation D) (a) and (b)

Last Answer : (a) and (b)

Which is the main function of transport layer? A) Node to node delivery B) End to end delivery C) Synchronization d) Updating and maintaining routing tables

Description : Which is the main function of transport layer? A) Node to node delivery B) End to end delivery C) Synchronization d) Updating and maintaining routing tables

Last Answer : B) End to end delivery

Which among the following represents the objectives/requirements of Data Link Layer? a. Frame Synchronization b. Error & Flow Control c. Both a & b d. None of the above

Description : Which among the following represents the objectives/requirements of Data Link Layer? a. Frame Synchronization b. Error & Flow Control c. Both a & b d. None of the above

Last Answer : c. Both a & b

Header of a frame generally contains a. synchronization bytes b. addresses c. frame identifier d. all of the mentioned

Description : Header of a frame generally contains a. synchronization bytes b. addresses c. frame identifier d. all of the mentioned

Last Answer : d. all of the mentioned

Header of a Layer two frame usually contain ______________ A. synchronization bytes B. addresses C. frame identifier D. all of the mentioned

Description : Header of a Layer two frame usually contain ______________ A. synchronization bytes B. addresses C. frame identifier D. all of the mentioned

Last Answer : D. all of the mentioned

The transmission signal coding method of TI carrier is called a. Bipolar b. NRZ c. Manchester d. Binary

Description : The transmission signal coding method of TI carrier is called a. Bipolar b. NRZ c. Manchester d. Binary

Last Answer : Bipolar

1000Base-T uses________line coding. A) 4D-PAM5 B) 8B6TC) MLT-3 D) Manchester

Description : 1000Base-T uses________line coding. A) 4D-PAM5 B) 8B6T C) MLT-3 D) Manchester

Last Answer : 4D-PAM5

100Base-T4 uses________line coding. A) NRZ B) 8B6T C) MLT-3 D) Manchester

Description : 100Base-T4 uses________line coding. A) NRZ B) 8B6T C) MLT-3 D) Manchester

Last Answer : 8B6T

The minimum bandwidth of Manchester and differential Manchester is ____that of NRZ. A) the sameas B) twice C) thrice D) none of the above

Description : The minimum bandwidth of Manchester and differential Manchester is ____that of NRZ. A) the sameas B) twice C) thrice D) none of the above

Last Answer : twice

The idea of RZ andthe ideaof NRZ-I are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Description : The idea of RZ andthe ideaof NRZ-I are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : differential Manchester

The idea of RZ andthe ideaof NRZ-L are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Description : The idea of RZ andthe ideaof NRZ-L are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : Manchester

Two common scramblingtechniques are ________. A) NRZ and RZ B) AMI and NRZ C) B8ZS and HDB3 D) Manchester and differential Manchester

Description : Two common scramblingtechniques are ________. A) NRZ and RZ B) AMI and NRZ C) B8ZS and HDB3 D) Manchester and differential Manchester

Last Answer : B8ZS and HDB3

What is Bit Synchronization ?

Description : What is Bit Synchronization ?

Last Answer : The method used to coordinate between different bits when sending a signal is called bit synchronization.

What synchronization is provided so that the start and end of message is identified? A. Carrier B. Character C. Bit D. Clock

Description : What synchronization is provided so that the start and end of message is identified? A. Carrier B. Character C. Bit D. Clock

Last Answer : B. Character

In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the first and the last bytes of the payload, respectively are a. Last fragment, 2400 and 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Description : In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the ... 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Last Answer : c. Last fragment, 2400 and 2759

In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the first and the last bytes of the payload, respectively are a. Last fragment, 2400 and 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Description : In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the ... 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Last Answer : c. Last fragment, 2400 and 2759

The sharing of a medium and its link by two or more devices is called _______. A) modulation B) encoding C) line discipline D) multiplexing

Description : The sharing of a medium and its link by two or more devices is called _______. A) modulation B) encoding C) line discipline D) multiplexing

Last Answer : multiplexing

The ASCII encoding of binary data is called a. base 64 encoding b. base 32 encoding c. base 16 encoding d. base 8 encoding

Description : The ASCII encoding of binary data is called a. base 64 encoding b. base 32 encoding c. base 16 encoding d. base 8 encoding

Last Answer : a. base 64 encoding

What Are The Primary Elements Usedfor Flow Measurement?

Description : What Are The Primary Elements Usedfor Flow Measurement?

Last Answer : The primary elements used for flow measurement are: 1. Orifice Plate. 2. Venturi tube. 3. Pitot tube. 4. Annubars. 5. Flow Nozzle. 6. Weir & Flumes.