Why the Led Glow in Dc Supply ? Whenever give the Ac Supply What is Affect in Led ?

1 Answer

Answer :

LEDs consume DC current to produce light; with AC current the LED will only be lit when current flow is in the proper direction. AC applied to an LED will cause it to blink on and off, and at high frequency the LED will appear to be lit continuously.

Related questions

Description : Rave Glow Sticks

Last Answer : Glowsticking is one dance form that makes use of glow sticks, hence the name. Different materials with similar qualities may be used in the same activity for as long as they are also durable, safe to ... Not only did this pose potential troubles, but it also put the rave culture in a bad light.

Description : Neon Glow Sticks

Last Answer : Glow sticks are not only useful in different party situations, the neon light they emit also open doors to artistry and creative expressions. Although a glow stick cannot be recharged, the glow lasts for a ... , so why ingest it? The newer glow sticks being produced today are said to be non-toxic.

Description : Mouth Glow Sticks

Last Answer : Glow sticks can be used as alternative lighting in different occasions. Whether for camping, underwater exploration, or even during plain power outages, glow sticks can be lit up instantly. No batteries are also ... sticks in our mouth? That greatly depends on you if you want to take on this thrill.

Description : Mini Glow Sticks

Last Answer : Mini glow sticks are not any less popular than their larger counterparts. They are often only one and a half inches in length, but this minute size is the very reason why some people prefer ... online. On top of that, you can also purchase mouth holders that eliminate possibilities of choking.

Description : Glow Stick Necklaces

Last Answer : Glow stick necklaces are not much different from ordinary glow sticks, except that they are usually longer. They are also activated by bending, which breaks the inner vial and produces the chemical reaction of its ... dollar each, but you may need to buy ten or a dozen of them when ordering online.

Description : Cheap Glow Sticks

Last Answer : Glow sticks are great additions to any kind of event. If you're the host, your guests will certainly be impressed to see that you've prepared this kind of thrill for them. In an effort to ... moreover, you also help create a more festive atmosphere through the faint neon colors of the glow sticks.

Description : Bulk Glow sticks

Last Answer : If you're planning to use glow sticks for a birthday party or any large event, you'll find the best deal in terms of price if you'll get them by bulk. Your guests will certainly find ... though: the light of these glow sticks last shorter since they consume the energy of the chemicals more rapidly.

Description : The Guide to Glow Sticks

Last Answer : It is interesting to know how glow sticks manage to emit a strong light despite the absence of any form of battery or bulb. A chemical reaction is responsible for the light they give off. ... lead to unintended results. In addition, fluorescent dye can also damage your clothes and other fabrics.

Description : How To Make Glow In The Dark Ink

Last Answer : You can make glow-in-the-dark ink with 2 simple ingredients. Materials: 1oz Cinnamon 1/4 oz. Phosphorous Instructions: Pour into a small bottle 1 oz. oil of cinnamon and 1/4 oz.phosphorous. Close the bottle tightly and place in a hot water bath. Heat until the ingredients have melted together.

Description : Analyze the effect of supply voltage on performance of LED as regards current, Lumen output, efficacy and life. 

Last Answer : 1) Effect on Current:- In LED current depends upon supply voltage, if voltage get changes then current also change but this change in current will be control by resistors which are connected in series.  2) ...   4) Effect on Life:- If supply voltage is not stable then life of LED get reduced. 

Description : Advantages of LED over CFL.

Last Answer : Advantages of LED over CFL. 1) Efficiency: LED bulbs use close to a third of the amount of power CFL bulbs would use to produce the same amount of light. This makes them ... decorative to heavy duty industrial applications.  6) Maintenance: Smooth light and low maintenance compared to CFL

Description : Draw symbol of LED and explain it’s working principle.

Last Answer : Construction of LED: The basic structure of LED is shown in fig.(a). The active region exists between the p and n regions. The light emerges from the active side in all the directions when electron hole-pairs ... fig.(c). In this way an LED emits light. This is the principle of operation of LED.

Description : List four applications of LED.

Last Answer : Applications of LED 1.As a power supply status indicator in electronics instruments 2.In traffic light Indicators. 3.In data displaying boards. 4.In medical applications and toys 5.In optical fiber communications 6.Remote controls

Description : How to Build a Led Billboard

Last Answer : How to Build a Led Billboard How to Build a LED Billboard LEDs are basically light emitting diodes. They tend to emit light when an electrical power courses through them. A LED billboard is a ... plazas. China is one of the largest competitors in the global market for producing state of art LEDs.

Description : What are the advantages of LED lamps?

Last Answer : What are the advantages of LED lamps? LED lamps have an advantage over fluorescent lamps in the first place in terms of environmental friendliness. Another reason for using LED lamps is ... advantages. Today, such lamps are used in everyday life, for industrial lighting and street lighting.

Description : Draw symbols of zener diode and LED.

Last Answer : Symbol of zener diode : Symbol of LED

Description :  Compare the salient features of LED and CFL based on: i] Lamp Efficiency ii] Life span 

Last Answer : Parameter LED CFL Lamp Efficiency  High (more than 70 lumen per watt) Comparatively less (50-60 lumen per watt) Life span (in working hours) 10000 3000

Description : Describe working principle of LED with diagram.

Last Answer : Constructional Diagram: * Light Emitting Diode (LED) works only in forward bias condition. When Light Emitting Diode (LED) is forward biased, the free electrons from ... gallium arsenide and gallium phosphide the emitted photons have sufficient energy to produce intense visible light.

Description : Draw the symbol of LED & photodiode. 

Last Answer : Symbol of LED & photodiode

Description : How do you know the voltage of an LED?

Last Answer : After connecting led to a DC source we can measure the voltage of led by connecting a voltmeter across it.  But voltage rating of the led is given by the manufacturers. Or we can ... in the market For more doubts connect with me in linkdin [email protected] 

Description : What is the voltage of a red LED?

Last Answer : A red led requires 2v to light. LEDs requires different amounts of voltage ranging between 1.8 and 3.3 depending on the intensity and color of the Led.

Description : When troubleshooting electronic equipment, you should use a high impedance multimeter ________________. A. to prevent excess current flow through the meter that would damage it B. for AC measurements only ... being tested D. so as not to load down the circuit and obtain erroneous voltage readings

Last Answer : Answer: D

Description : when charging a battery we use a DC supply but not an AC supply. Why ?

Last Answer : When power is supplied to the battery, electrolyte inside the battery is divided into positive and negative ions, where ions with similar pole is gained in one side. This reactionʼs flow coincides with direct current.

Description : AC supply system compared to DC supply system has the advantage:

Last Answer : AC supply system compared to DC supply system has the advantage: low cost of switching

Description : A burned-out LED should be indicated by _____________. A. excessive output B. a slight glow in the crystal C. excessive illumination D. no illumination

Last Answer : Answer: D

Description : If 200w, 100 w and 60 w lamps connected in series with 230V AC , which lamp glow brighter? Each lamp voltage rating is 230V.

Last Answer :  Each bulb when independently working will have currents (W/V= I)  For 200 Watt Bulb current (I200) =200/230=0.8696 A  For 100 Watt Bulb current (I100) =100/230=0.4348 A  ... current through it. So minimum power dissipated across it as min current X equal Voltage across =s min power dissipation

Description : If the supply voltage is 220 volts 60 Hz, what is the operating voltage of the motor controller circuitry illustrated? EL-0011 A. 110 volts DC B. 110 volts AC C. 220 volts DC D. 220 volts AC

Last Answer : Answer: D

Description : A DC generator is used to supply direct current in order to maintain an AC generator field and is known as a/an _____________. A. rotor B. stator C. exciter D. armature

Last Answer : Answer: C

Description : AC and DC generators are similar in that they _____________. A. both generate alternating voltages B. both rectify the voltage before delivery C. are constructed at the same physical size for the same kilowatt rating D. both supply three-phase power

Last Answer : Answer: A

Description : The electrical supply applied to the anodes shown in the illustration is _____________. EL-0090 A. low voltage, high current DC B. low voltage, high current AC C. high voltage, low current DC D. high voltage, low current AC

Last Answer : Answer: A

Description : The most common source of excitation for synchronous motors is a/an ______________. A. stepup transformer B. half-wave rectifier C. DC supply D. AC supply

Last Answer : Answer: C

Description : The most common source of excitation for synchronous motors is a/an _____________. A. low voltage battery B. motor attenuator set C. DC exciter generator D. AC supply

Last Answer : Answer: C

Description : When using multiple SAW arc systems (twin wires etc), the arcs often have different polarities or use all AC rather than DC polarity, this is to? a) Prevent arc blow between arcs b) To maximize productivity c) To even out the power factor on the mains supply d) Make it easier to initiate the arc

Last Answer : a) Prevent arc blow between arcs

Description : Explain what happens if a DC motor is fed with AC supply

Last Answer : Motor will run at low speed, sparking at brushes, heat due to eddy current will finally burn the motor.

Description : An AC supply of 230 V is applied to half wave rectifier circuit. A transformer turns ratio is 20 : 1. Find i) Output DC voltage (ii) Peak Inverse Voltage (PIV)

Last Answer : Solution:

Description : Two bulbs of 100w and 40w respectively are connected in series across a 230v supply which bulb will glow bright and why?

Last Answer : A:Since two bulbs are in series they will get equal amount of electrical current but as the supply voltage is constant across the bulb(P=V^2/R).So the resistance of 40W bulb is greater and voltage across 40W is more (V=IR) so 40W bulb will glow brighter.

Description : Two bulbs of 100w and 40w respectively connected in series across a 230v supply which bulb will glow bright and why?

Last Answer : Since two bulbs are in series they will get equal amount of electrical current but as the supply voltage is constant across the Bulb (P=V^2/R).So the resistance of 40W bulb is greater and voltage across 40W is more (V=IR) so 40W bulb will glow brighter.

Description : When current flows through heater coil it glows but supply wiring does not glow because?

Last Answer : When current flows through heater coil it glows but supply wiring does not glow because resistance of heater coil is more than the supply wires.

Description : On AC vessels, which of the following statements represents the most difficult problem involved in obtaining a DC potential suitable for use by computer components? A. A stepdown transformer is ... voltage must be rectified and made ripple free. D. Rectifiers cannot operate with voltage regulators.

Last Answer : Answer: C

Description : Why does my 2001 Infiniti G20 make a squealing noise whenever i start it and turn the AC on?

Last Answer : answer:It sounds like you may have a loose or dry belt(s). You can get some belt conditioner that you spray on the belt while the engine is running, or you may have to replace the belt(s). Napa and Pep Boys should both carry some.

Last Answer : Due to no potential difference between the ends of the circiut there is no existance of current 

Last Answer : dc

Description : Why are DC motors used in trains and not AC motors ?

Last Answer : The reason is torque. torque is inversely proportional to speed..i.e when th knowe train comes to rest position to motion.. initial speed is zero..so it requires high starting torque for ... current will flow through field and armature coils then maximum torque is available at the intial condition.

Description : Why is AC considered more efficient than DC?

Last Answer : Ac is more efficient than dc because it is easy to maintain and change the voltage of ac for transmission and distribution purpose. Plant cost of ac transmission is much lower compared to dc transmission. When fault occurs it is easy to interrupt ac supply.

Description : Which is more dangerous AC or DC and why ?

Last Answer : Dc is more dangerous than Ac because in Ac the voltage  will varies but in dc the constant voltage 

Description : Why is AC better for long distance power transmission than DC ?

Last Answer : ac is more economical to transmit for long distances . wires can be made smaller by step up transformer .. since major cost are wires to transmit .. then at the end of distance step down transformer is used for commercial use.

Description : Why can't we store AC in batteries instead of DC ?

Last Answer : Because the direction of the current changes in AC electricity, you cannot directly store the power. Placing a capacitor in an AC circuit has no effect on the alternating flow of the electricity. The only ... is indirectly, by storing DC and then using a power inverter to convert the DC to AC.

Description : What would happen if a DC motor was supplied with AC ?

Last Answer : With three phase induction motor, humming and not rotate, but if single phase universal motor like air blower, home mixture, motor run on constant speed..speed variation not possible...

Description : What is the conversion between. AC to AC ? DC to DC? AC to DC? DC to AC ?

Last Answer : 1.ac to ac is regulation 2.dc to dc is chopper 3.ac to dc is rectifier 4.dc to ac is inverter