Describe fire extinguishing method.

1 Answer

Answer :

(i) Carbon Dioxide Extinguishing Systems 

This type is the most suitable & widely recommended one for electrical fires. Carbon dioxide (CO2) extinguishers are normally Class C extinguishers. Before using, Switch off the supply immediately so that the source for the fire to get sustained is isolated using proper insulated hand gear/foot gear . To use the extinguisher, pull the pin near the handle, point the horn at the base of the fire, and hold down the handle. As the flames shrink, continue spraying until the fire is fully extinguished. 


(ii) Dry chemical extinguisher 

The Dry Powder (or Dry Chemical) charged fire extinguisher is a multipurpose fire extinguisher and can be used on wide variety of fires. They are used on electrical fires but leave a residue that may be harmful to sensitive electronics. They work by chemical reaction with the fire causing the particles to expand chemically inhibiting combustion and expelling the oxygen thereby smothering the flames.

Related questions

Description : Write short notes on fire extinguishing methods adopted in electrical engineering. 

Last Answer : Stand 6 to 8 feet away from the fire and follow the four-step PASS procedure. If the fire does not begin to go out immediately, leave the area at once. Always be sure ... fire causing the particles to expand chemically inhibiting combustion and expelling the oxygen thereby smothering the flames. 

Description : What are the different type of fire extinguishers used for different type of fires. Describe in brief working of fire extinguisher used for ‘electrical fire’?

Last Answer : Ans The types of extinguishers normally used are: Soda acid type Foam type Dry powder type Carbon dioxide type & Halol (chloro bromo methane) type Soda acid type of extinguisher is ... checked regularly for loss of charge, damage etc. Records of all tests and checks must be maintained.

Description : Distinguish between fire tube and water tube boilers in steam power plant.

Last Answer : Fire Tube boiler Water Tube boiler In fire tube boilers hot gases are passed through the tubes and water surrounds these tubes. In these boilers water is inside the tubes and hot gases are ... risk of explosion due to low pressure. Risk of explosion is more due to high pressure.

Description : Merits of two wattmeter method

Last Answer : Advantages of Two Wattmeter Method for 3-Phase Power Measurement: 1) It is used for balanced as well as unbalanced load. 2) For the star type load, it is not necessary to ... reactive volt-amperes for balanced loads also. 7) The circuit connections are independent of load connection.

Description : Write one advantage and one disadvantage each for spring control method and gravity control method.

Last Answer : Advantages of Spring Control Method: 1) The spring-controlled meters may be used in any position. 2) In some instruments, springs can be used as current leads. 3) As springs are light in weight ... only. 2) Scale is non-uniform. 3) Control weights add to the weight of instrument.

Description : State any two disadvantages of one wattmeter method of measurement of 3 phase power.

Last Answer : State any two disadvantages of one wattmeter method of measurement of 3 phase power. Disadvantages of one wattmeter method:- 1. Only used for balanced load 2. It can not be used for ... connection then neutral point must be available 4. Delta connection must be opened to connect current coil.

Description : With neat diagram explain calibration of energy meter by direct loading method.

Last Answer : Calibration of Energy Meter by Direct Loading Method:  There are three methods for testing/calibration:  1. Long period dial test  2. Using rotary sub- standard meter  3. Using precision grade instruments  All ... of substandard meter in kWh  Then % error = [(D - DS)/DS] x 100

Description : Explain V- I method of measurement of medium resistance. 

Last Answer : In this method, use suitable source, ammeter and voltmeter and connect them as shown in the above diagram. Take reading of voltmeter and ammeter, then value of resistance = R = V/I Ω To minimise the error take 4 to 5 observation for the same resistance and take their average.

Description : Explain spring control method with neat diagram.

Last Answer : Spring Control Method: As shown in the figure the inner ends of the both springs are attahced to the spindle ,while outer end of upper spring is attached to the lever and outer end of ... the springs are twisted in opposite direction to the motion of pointer and produce controlling torque.

Description : List one advantage and one disadvantage of one wattmeter method. 

Last Answer : Advantages:  1) Only one wattmeter is used.  2) Less number of connections.  3) Cost required is less.  Disadvantages:  1) Used only for 3- Φ balanced load and not for ... be accessible for connecting the Pressure coil.  3) Delta connection must be opened to connect current coil. 

Description : List any four errors in induction type energy meter. Give method of compensation for each.

Last Answer : Errors in Induction Type Energy Meter with their Compensation:  1) Error due to friction: This error can be compensated by the additional shading band provided on the shunt electromagnet.  2) Phase ... error: This error can be compensated by providing a flux diverter' to the current magnet. 

Description : The self GMD method is used to evaluate

Last Answer : The self GMD method is used to evaluate inductance and capacitance

Description : Has anyone run buck naked, out of a shower, from a fire alarm?

Last Answer : Surely it has, to someone, sometime. It never happened to me, but I was staying in a small hotel once when a fire alarm went off after midnight and I was only able to grab a coat ... That was pretty interesting. Nobody unclothed, though. I'm sure somebody would have contributed a blanket or jacket.

Description : Does fire have an alternative to oxygen?

Last Answer : Nope. But it doesn’t take a lot of oxygen, which is why roots can smolder for months.

Description : When will sound based fire extinguishers be used for wildfires?

Last Answer : Have you any idea what might be required to generate sounds sufficient to extinguish a blaze the size of a forest fire?

Description : How do you make fire hotter with only matches and wood?

Last Answer : Airflow. Blow on it. Bellows. Fan.

Description : My Kindle Fire seems to steadily lose battery life even while it's in sleep mode - troubleshooting advice?

Last Answer : Sounds pretty normal to me.

Description : How much does fire weigh?

Last Answer : I think it’s hot gas and ash, and the mass depends on the specific contents.

Description : Why do we play with fire?

Last Answer : May be some primordial thing.

Description : Did you know that we are all doomed when the earth catches fire today?

Last Answer : I can help these people. We all know that it is as easy for a rich person to get into heaven as it is for a camel to pass through the eye of a needle. I can relieve these people of all ... of salvation, but I can take on the burden of the excess of wealth of others to assure their eternal bliss.

Description : What should I expect involving a fire insurance claim?

Last Answer : Is business loss the same as business interruption?

Description : Do you have first hand experience of a bush fire?

Last Answer : answer:While I was a kid growing up in the 60's and 70's on the edge of Los Angeles, there were several fires that came within threatening distance. In LA in those years thick air was not so ... a few hours or days of acrid smoke you might wish you had gone somewhere else for a while anyway.

Description : Have you ever lit a fire that got out of control?

Last Answer : answer:Two words: mushroom cloud. Technically it was my brother that lit it, and I guess technically we got it under control within a few minutes. But still…

Description : In the case of the San Bruno fire is PG&E trying to duck, dodge, and hide?

Last Answer : Of course they are. They stand to lose millions!

Description : How can i make fire from house hold items?

Last Answer : answer:Do you have a cardboard egg carton, lint from the laundry dryer, and a little wax (plus a match)? We used to stuff the individual egg sections with the lint, pour a bit of wax in it, ... to use the sections to start a campfire in scouts. You might also find something on this How To website.

Description : How effective are fire drills in preparing people for an emergency?

Last Answer : I've wondered this myself. During a drill, at least all the ones I've been through, everyone knew it was a drill. If it were a real fire I believe the panic factor would be a lot ... panic situation I guess having some kind of muscle memory and subconscious guiding the way might help quite a bit.

Description : If your house was on fire and you could only save 3 things (excluding pets and people, they make it out safely) what would you save and why?

Last Answer : Everything with an Apple logo on it :) My livelihood is on those thingamachingies

Description : Whenever there is a brush fire or forest fire that covers a large amount of territory, how do they determine how many acres have already been burned and how do they determine how much of the fire is actually contained at any given point?

Last Answer : As far as total acres burned I'd assume it's done via satellite imagery or by simple plane flyovers. For percentage contained, it's probably done the same way. They can say certain fires ... how much is contained. Then you can figure out a percentage contained amount / total burning = percent.

Description : Have any other Angelinos been evacuated do to the fire?

Last Answer : I’ve been seeing the news coverage, but they are not saying exactly where the fires are. Good luck Tiny!

Description : Would it be worse to be set on fire, or frozen in ice?

Last Answer : Well, I think you would die if you were frozen inside a large block of ice, whereas you would have a chance to live if you were only set on fire. If the question were, would you rather die by hot or die by cold, then i would pick cold – your senses would numb faster.

Description : Types of Fire Extinguishers? Use of Fire Extinguisher ?

Last Answer : Ans. CO2 Type Fire Extinguishers, DCP type Fire Extinguishers Used for extinguishing fires of (1) Solid fires (2) Liquid fires (3) Gasfires(4)Electric

Description : How to Use a Fire Extinguisher

Last Answer : How to Use a Fire Extinguisher Fires are among the most common accidents that happen at homes, which is why it's very important to get a fire extinguisher. This helpful equipment will help you ... fire extinguisher at home and the right knowledge to use it, you can prevent this from happening.

Description : How to Put Out a Gas Fire

Last Answer : How to Put Out a Gas Fire Gasoline is a very useful substance, but it is also one of the most dangerous chemicals in the world. When exposed to a spark or an open flame, any source of gasoline ... fire brigade. Gas fires are very dangerous, so you must take extra care when putting out gas fires.

Description : How to Build a Fire Pit

Last Answer : How to Build a Fire Pit Building a fire pit can be an easy and subtle job, it just takes the right person to put forth their effort and get the job done. Once this magnificent addition to your home is ... family. Now that you are finished, you can sit back, get the firewood, light it up and enjoy.

Description : How to Build a Brick Fire Pit

Last Answer : How to Build a Brick Fire Pit If you are wanting an exciting yet inexpensive addition to your backyard, an outdoor fire pit is the perfect choice. Although it is pretty challenging to construct, it is ... wood to burn. Many different logs give their own unique flavor to the food you will be cooking.

Description : How to Build Fire

Last Answer : How to Build Fire How to Build Fire Fire is a combination of excessive heat and glowing light. Fire can be made with the contact of heat or any other energy; it can be formed from a match- ... burn, first use a rolled newspaper on the ground then the small kindling. Allow enough oxygen to enter.

Description : How to Choose a Birth Control Method

Last Answer : How to Choose a Birth Control Method Birth control methods depend on the couple's needs and commitment to the method. Some couples just need to prevent pregnancy while others wish to avoid sexually- ... unplanned sex, a broken condom or failure to take birth control pills two days in a row.

Description : How to Use the Rhythm Method

Last Answer : How to Use the Rhythm Method The rhythm method is one of the many natural ways of birth control. This technique is based on the length of your menstrual cycle. Here are some tips you can ... their phases. There are numerous natural birth control techniques. Use the one the best suits your needs.

Description : Explain the thermal triggering method of SCR. Enlist different triggering methods of SCR.

Last Answer : Types of Triggering: 1) Forward voltage triggering 2) Thermal triggering (Temperature triggering) 3) Radiation triggering (Light triggering) 4) dv/dt triggering 5) Gate triggering ... generated leakage current increases. This current gets multiplied internally and thyristor is turned on. 

Description : Illustrate with neat wiring diagram a single lamp control by two point method.

Last Answer : Single lamp control by two point method:  This system is commonly used for stair case wiring. It consists of two way switches (the switch operates always in one of the two possible positions) the ... the person will change the position of switch S2, so that the lamp will be switched OFF'.

Description : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Last Answer : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Description : Draw and explain bulk correction method for power factor & control.

Last Answer : Bulk correction method for power factor & control: i) Here individual starter controls the capacitors located at distribution panel. ii) Centralized compensation is employed in large industrial plants where many ... capacitor units in steps to maintain P.F. more than preset limit (0.95). 

Description : Explain energy conservation method in lighting system by using installation of separate transformer / servo stabilizer.

Last Answer : Energy conservation techniques by installation of separate transformer / servo stabilizer: The luminous efficiency of lamps depends upon the voltage applied across the terminals. It gives its best ... the voltage constant in that installation for giving best luminous efficiency of lamps.

Description : The power consumed by a balanced 3-ph load is measured by two-wattmeter method. The meter readings are 8 kW and 4 kW. The power factor of the load is (A) zero (B) 0.5 (C) between zero and 0.5 (D) between 0.5 and unity

Last Answer : The power consumed by a balanced 3-ph load is measured by two-wattmeter method. The meter readings are 8 kW and 4 kW. The power factor of the load is between 0.5 and unity

Description : Compared to Gauss-Seidel method, Newton-Raphson method takes : A. less number of iterations and more time per iteration B. less number of iterations and less time per iteration C, more number of iterations and more time per iteration D. more number of iterations and less time per iteration

Last Answer : Compared to Gauss-Seidel method, Newton-Raphson method takes : A. less number of iterations and more time per iteration B. less number of iterations and less time per iteration ... of iterations and more time per iteration D. more number of iterations and less time per iteration

Description : The bridge method commonly used for finding mutual inductance is (A) Heaviside Campbell bridge (B) Schering bridge (C) De Sauty bridge (D) Wien bridge

Last Answer : The bridge method commonly used for finding mutual inductance is Heaviside Campbell bridge

Last Answer : Plugging braking method can bring the locomotive to dead stop.

Last Answer : Plugging method of braking is generally used in elevators.

Last Answer : Regenerative method of braking is based on that back e.m.f. is equal to the applied voltage.

Last Answer : The main disadvantage of the Ward-Leonard control method is high initial cost, high maintenance cost, low efficiency at light loads.