operation of DSO with block diagram.

1 Answer

Answer :

The input is amplified and attenuated with input amplifiers. The output of the input signal amplifiers feeds an analog to digital converter (ADC). There are numbers of ADC available. But the selection of ADC is depends on the speed of converters, because the conversation of analog to digital signal should be in fast rate. A digital storage oscilloscope digitizes the input signal, so that all subsequent signals are digital. The storage occurs in electronic digital memory. The input signal is digitized and stored in memory in digital form. In this state it is capable of being analyzed to produce a variety of different information. To view the display on the CRT, the data from memory is reconstructed in analog form.

image

Related questions

Description : What is PLL? Explain its operation with a block diagram.

Last Answer : PLL - A phase-locked loop or phase lock loop is a control system that generates an output signal whose phase is related to the phase of an input signal Block diagram  ... to the input frequency. The phase - locked loop goes through three states free running capture and phase lock.

Description : block diagram of logic analyzer.

Last Answer : A logic analyzer can be triggered on a complicated sequence of digital events, then capture a large amount of digital data from the system under test (SUT).When logic analysers first came ... Once the data are captured, they can be displayed several ways, from the simple) to the complex 

Description : What is digital storage oscilloscope (DSO)?

Last Answer : Digital storage oscilloscope have many advantages as compared to analogue oscilloscope. Digital storage oscilloscope uses analogue to digital converter and digital to analogue converter and also it ... oscilloscope is used for comparing waveforms and recording and it have many different uses.

Description : Draw the labeled block diagram of process control system and explain each block.

Last Answer : Explanation - Process control system consists of process or plant, sensor, error detector, automatic Controller, actuator or control element. 1) Process or plant- process means some manufacturing sequence ... process which changes the process variable. Output of this block is denoted by u .

Description : Draw the block diagram of PLC.

Last Answer : Block diagram of PLC and input/output devices used for PLC Input/output devices - The input module has bank of terminals for physically connecting input devices, like push buttons, limit switches etc. ... is to translate signals from the PLC's CPU into a form that the output device can use.

Description : Draw the block diagram of regulated power supply, explain function of each block and draw waveforms of each stage.

Last Answer : 1. A step down transformer 2. A rectifier 3. A filter 4. A regulator Operation of Regulated Power Supply:- Step Down Transformer:- A step down transformer will ... regulator. A regulator will maintain the output constant even when changes at the input or any other changes occur.

Description : Draw block diagram of PLL as a FM demodulator. Explain function of each block.

Last Answer : Operation:  The FM signal which is to be demodulated is applied at the input of the PLL.  the PLL is locked to the FM  The error voltage produced at ... using PLL ensures a high Linearity, between the instantaneous input frequency and VCO control voltage (error amplifier output)

Description : Block Diagram of op-Amp

Last Answer : Block Diagram: The OP-AMP is basically a different amplifier i.e. it will amplify the voltage which is differentially present between its input terminals.  1.Input stage: The ... normally a complementary output stage. It increases the OPAMP. It also provides a low output resistance. 

Description : Draw block diagram for CNC drilling machine and explain its working.

Last Answer : Block diagram consist of the following points:  Machine tool with DC servo motor as feedback element. The transducer is added as adaptive control application.  The auxiliary controller ... line.  The interrupt pulses are generated by TBG and supplied to computer through inter

Description : Draw the block diagram of satellite sub-system and explain power subsystem.

Last Answer : POWER SUBSYSTEM- This system provides the necessary DC power to the satellite. All communication satellites derive their electrical power from solar cells. There is also a battery backup facility used during ... . to d.c. converter is used to raise the level of low voltages to high voltage.

Description : Describe block diagram of digital comparator and write truth table of 2 bit comparator.

Last Answer : Digital comparator is a combinational circuit which compares two numbers, A and B; and evaluates their relative magnitudes. The outcome of the comparison is given by three binary variables which indicate whether A ... Depending on the result of comparison one of these outputs will go high.

Description : Draw the block diagram of basic wind energy conversion system and write function of each block. 

Last Answer : Block diagram of basic wind energy conversion system: OR Components of wind power plant and their functions:  1) Rotor /Blade/Aero-turbine: Blade extracts significant power from the ... stronger and smoother. Towers are supports to raise the main part of the turbine up in the air.

Description : Explain with block diagram photovoltaic power generation.

Last Answer : Photovoltaic power generation:  Photovoltaic power generating system consists of following components: 1. Photovoltaic cell panel: Its function is to convert energy content of sunrays directly into DC ... . Step-up transformer: It step-up input voltage to utilization voltage e.g. 230V.

Description : Draw a block diagram of electronic energy meter. Write function of each block.

Last Answer : Electronic Energymeter  Functions of components/blocks: - CT reduces current to reasonable value for current scaling network. - Voltage & current scaling networks reduce proportionally the voltage ... ADC converts the square wave frequency analog output to display the energy in watthour.

Description : Describe principle of operation of Doppler type ultrasonic flow meter with diagram. 

Last Answer : Diagram: Working:  The flow meter consists of a crystal transducer mounted outside the pipe in which flow is to be measured. This transducer is a piezoelectric crystal which ... , so the frequency of the reflected wave is shifted to particle velocity, according to Doppler principle.

Description : operation of ramp type DVM.

Last Answer : This is given to an input comparator which will compare two signals and generates the output. One input to the input comparator is from the input and another input is from the ramp. This input voltage and ... ground and output is given. This output will stop the flow of purchase from clock

Description : operation of half wave rectifier type AC Voltmeter.

Last Answer :  Half-wave Rectifier Voltmeter The d'Arsonval meter movement only responds to the average or dc value of the current through the moving coil. In order to measure alternating ... ) input voltage signal alternating signal needs to be rectified first by using diode rectifier to produce 

Description :  operation of whetstone bridge. 

Last Answer : A Wheatstone bridge is widely used to measure the electrical resistance. This circuit is built with two known resistors, one unknown resistor and one variable resistor connected in the form of bridge. ... using a Wheatstone Bridge the unknown electrical resistance value can easily measure.

Description : The operation of a ramp type Digital Voltmeter is based on the principle of (A) Voltage-to-current conversion. (B) Voltage-to-time conversion. (C) Current-to-time conversion. (D) Current-to-frequency conversion.

Last Answer : The operation of a ramp type Digital Voltmeter is based on the principle of Voltage-to-time conversion.

Description : Describe the basic SHA operation with the help of its four mode specifications.

Last Answer : Sample-and-hold amplifier (SHA) is a unity gain amplifier with a mode control switch where the input of the amplifier is connected to a time-varying signal. A trigger pulse at the mode control switch ... but other forms, such as optical and mechanical forms, are possible. Also denoted S/H.

Description : Explain the operation of UPS with a neat block diagram.

Last Answer : Uninterruptible-Power-Supplies (UPS): A block diagram of UPS system is shown in figure. It essentially consists of four major components: i)Rectifier (or battery charger) ii) ... . Due to fast action requirement, transfer switch can be implemented by fast acting semiconductor devices.

Description : Draw neat block diagram of FM receiver and explain function of each block

Last Answer : Explanation:-  RF amplifier: There are two important functions of RF amplifier: 1) To increase the strength of weak RF signal. 2) To reject image frequency signal. In FM ... FM broadcast, the maximum modulating frequency is 15 kHz. Hence the audio amplifier must have large bandwidth.

Description : Draw block diagram of instrumentation system. State function.

Last Answer : Primary transducer: The sensor which comes in contact with the measurement medium to sense the quantity. Variable conversion element: the transducer which converts the sensor ... transmitted through suitable transmission medium to the operator or presented with the help of indicators.

Description : Draw block diagram of CRO. Write function of each block.

Last Answer : 1. Vertical amplifier strengthens the input signal applied to vertical depleting plates 2. Trigger circuit gives input to time base circuit 3. The output of time base generator is amplified by ... of CRT internally coated with Phosphors material on which we observe waveform of the input signal.

Description : Describe the operation of N channel enhancement type MOSFET with diagram.

Last Answer : As its name indicates, this MOSFET operates only in the enhancement mode and has no depletion mode. It operates with large positive gate voltage only. It does not conduct when the ... of charge carriers attracted to the positive gate. Thus drain current is controlled by the gate potential.

Description : Draw diagram of class A push-pull amplifier and explain its operation. 

Last Answer : Class A Push-pull Amplifier: The circuit diagram of class A push-pull amplifier is as shown in the fig.(a). Operation: The resistors R1 and R2 along with Vcc provide the dc biasing so as ... Vcc is applied to the collectors of transistors Q1 and Q2 through the centretapped output transformer. 

Description : How to Install Glass Block Windows

Last Answer : How to Install Glass Block Windows In some rooms, like bathrooms and dark areas of the house, natural light looks great, so instead of regular windows, many people use glass block windows in various styles ... glass block windows.If you do it yourself using these steps, you can save a lot of money!

Description : How to Repair an Engine Block

Last Answer : How to Repair an Engine Block For a motor enthusiast, one of the worst things that can happen is a cracked or broken engine block. While a person with a new or used car only a few years ... require you to insert some type of sealant or epoxy. Not all metal stitching kits require this added feature.

Description : Which is better, brick or foam block?

Last Answer : Which is better, brick or foam block? Ideal materials for construction, or at least having an undoubted advantage over others, have not yet been invented. Both the brick and the foam ... risk of getting low-quality building material can be attributed to the general disadvantage of foam blocks.

Description : Fuel Pump Operation

Last Answer : Most people know that their cars have fuel pumps, but they don't really know how they operate. Some even pay attention to their fuel pumps only when they have already malfunctioned. It is important ... check your fuel pump for any problems because a defective pump can be dangerous while on the road.

Description : State jumping operation.

Last Answer : Jumping up operation: This process makes metal shorter and thicker and carried out at near welding temperature. Metal can be either thickened at the ends of bars or swollen in the center.

Description : With neat sketch explain four modes of operation of a TRIAC? 

Last Answer : Modes of operation of a TRIAC: There are four different operating modes of TRIAC:  1) MT2 and gate are positive with respect to terminal MT1(Mode1) : Here terminal MT2 is positive ... junction P2-N2 is forward biased, current carriers are injected and therefore, the TRIAC is turned on. 

Description : Draw & explain operation of phase detector.

Last Answer : In phase detector, the op-Amp basically acts as a zero crossing detector. If a sine wave is applied at the i/p, we get square wave at the op-Amp o/p (at point ... to two channel of the CRO. The time duration between the pulses corresponding to voltages represent the phase between them. 

Description : State the principle of operation of d.c. motor.

Last Answer : When a current carrying conductor is placed in a magnetic field, the conductor experiences the force. The magnitude of force is given by F = BIL newton  where F – Force   B – maximum flux density   I – Current   L – Length of conductor

Description : State principle of operation of piezo-electric transducer. State its application.

Last Answer : The piezoelectric element used for converting mechanical movement into electric signals. The mechanical deformation generates charges and this charge appears as a voltage across the electrodes.  ... destructive test (NDT) equipments 6. Piezoelectric materials are used in ultrasonic transducers. 

Description : Draw and explain integrated duration curve used in system operation. 

Last Answer : Diagram of integrated duration curve used in system operation: Explanation:  Integrated duration curve is obtained from load duration curve. It is drawn in between load on Y-axis in KW/MW and the X- ... a particular time of a day can also be shown on a curve which is called as mass curve. 

Description : Explain the operation of advanced gas cooled reactor.

Last Answer : Operation:- Carbon dioxide or Helium is the gas used for transferring the heat produced form the reactor core to the Heat exchanger. The gas is pumped through the reactor core at high pressure. In heat ... The AGR was designed to have a high thermal efficiency 40 %. Steam pressure is 162 Kg/cm2 

Description : Describe operation of N-channel JFET

Last Answer : Operation of N-channel JFET  1) When VGS = 0 volt: When a voltage is applied between the drain and source with a DC supply voltage VDD with VGS = 0 V, the electrons flow from source ... to zero. The gate to source voltage at which current reduces to zero is called as pinch-off voltage.

Description : What is photodiode? Draw the symbol and explain operation of photodiode. 

Last Answer : A photodiode is a light detector that converts light into an electrical current. A photodiode is a semi-conductor device, with a p-n junction and an intrinsic layer between p and n layers ... current is independent of reverse bias voltage. Reverse current is mostly depends on the light intensity.

Description : Which of the following thyristors can be used for high frequency of operation? A) TRIAC B) DIAC C) SCR D) GTO 

Last Answer : Which of the following thyristors can be used for high frequency of operation? A) TRIAC B) DIAC C) SCR D) GTO 

Description : What would happen if a power transformer designed for operation on 50 Hz (frequency) were connected to a 500 Hz (frequency) source of the same voltage:  (A) Eddy Current and Hysteresis losses will be ... Current will be too much high  (C) Transformer may start to smoke and burn  (D) No effect

Last Answer : What would happen if a power transformer designed for operation on 50 Hz (frequency) were connected to a 500 Hz (frequency) source of the same voltage:  (A) Eddy Current and Hysteresis losses will be ... will be too much high  (C) Transformer may start to smoke and burn  (D) No effect

Description : A four -quadrant operation requires two full converters connected in  (1) Series (3) Back to back (2) Parallel (4) Series Cascade

Last Answer : A four-quadrant operation requires two full converters connected in Parallel 

Description : An additional condition for parallel operation of three-phase transformers over single-phase transformers is that

Last Answer : An additional condition for parallel operation of three-phase transformers over single-phase transformers is that the transformers should belong to the same vector group

Last Answer : For the parallel operation of two or more D.C. compound generators, we should ensure that series fields of all generators should be either on positive side or negative side of the armature.

Last Answer : Overhead system can be designed for operation up to 400 kV.

Last Answer : Necessary conditions required to be satisfied in order to ensure successful parallel operation of single phase transformers:  1. Only transformers having the same phase displacement between primary and secondary ... . 7. The phase sequence must be followed strictly on HV and LV side connection.

Description : parallel operation of MOSFET can be done more easily as compared to thyristor. why?

Last Answer : Parallel operation of MOSFET can be done more easily as compared to thyristor because the resistance of MOSFET is increases with increase in temperature. MOSFET have the positive temperature coefficient. In ... the parallel operation of MOSFET can be done more easily as compared to the thyristor.

Description : Explain the series and parallel operation of MOSFET. Which is suitable and why?

Last Answer : Series operation of MOSFET: To increase voltage handling capability MOSFETs are connected in series. When the MOSFETs are connected in series each MOSFET should turn on and turn off ... on and turn off time and transconductance. Each MOSFET should share current equally.  

Description : Also, highlight the problem faced during parallel operation.

Last Answer : Parallel operation of IGBT: Parallel operation of IGBT is done for obtaining high current rating. Paralleling of IGBT reduces conduction losses and thermal stress. IGBT combines the qualities of ... . IGBTs must share losses equally otherwise IGBT may get failure due to thermal differences.

Description : With a neat diagram explain the construction of calendria type evaporator.

Last Answer : Calendria type(Short tube) evaporator: Construction: It consists of vertical cylindrical shell incorporating short vertical tube bundle with horizontal tube sheet. Vapour inlet is provided at top ... sheet, while non condensable gas is vented to atmosphere from point near top tube sheet.