Find current through resistor using nodal analysis

Find current through resistor using nodal analysis

image

by

1 Answer

Answer :


Find current through resistor using nodal analysis

by

Related questions

Sinusoidal Steady-State Analysis - Using nodal analysis, find node voltages in the circuit.

Description : Sinusoidal Steady-State Analysis - Using nodal analysis, find node voltages in the circuit.

Last Answer : Sinusoidal Steady-State Analysis - Using nodal analysis, find node voltages in the circuit.

Nodal analysis problem two current source

Description : Nodal analysis problem two current source

Last Answer : Nodal analysis problem two current source

Nodal analysis problem

Description : Nodal analysis problem

Last Answer : Nodal analysis problem

Nodal analysis example with dependent current source

Description : Nodal analysis example with dependent current source

Last Answer : Nodal analysis example with dependent current source

Nodal Analysis Example 3

Description : Nodal Analysis Example 3

Last Answer : Nodal Analysis Example 3

Nodal Analysis with Voltage Sources dependent voltage source and two supernode

Description : Nodal Analysis with Voltage Sources dependent voltage source and two supernode

Last Answer : Nodal Analysis with Voltage Sources dependent voltage source and two supernode

Nodal analysis example with voltage source and supernode

Description : Nodal analysis example with voltage source and supernode

Last Answer : Nodal analysis example with voltage source and supernode

Nodal Analysis with Voltage Sources

Description : Nodal Analysis with Voltage Sources

Last Answer : Nodal Analysis with Voltage Sources

Nodal Analysis Example 2

Description : Nodal Analysis Example 2

Last Answer : Nodal Analysis Example 2

Nodal analysis example 1

Description : Nodal analysis example 1

Last Answer : Nodal analysis example 1

Sinusoidal Steady-State Analysis - nodal analysis super node problem solution 2

Description : Sinusoidal Steady-State Analysis - nodal analysis super node problem solution 2

Last Answer : Sinusoidal Steady-State Analysis - nodal analysis super node problem solution 2

Sinusoidal Steady-State Analysis - nodal analysis super node problem solution

Description : Sinusoidal Steady-State Analysis - nodal analysis super node problem solution

Last Answer : Sinusoidal Steady-State Analysis - nodal analysis super node problem solution

Nodal analysis problems

Description : Nodal analysis problems

Last Answer : Nodal analysis problem 2

Nodal Analysis of Electric Circuits Example

Description : Nodal Analysis of Electric Circuits Example

Last Answer : Nodal Analysis of Electric Circuits Example 1 : https://youtu.be/XLS6kDQuHj0 Nodal Analysis of Electric Circuits Example 2 : https://youtu.be/OFhurvl74bA Nodal Analysis of Electric Circuits ... youtu.be/GmOozdjTVtM Nodal Analysis of Electric Circuits Example 9 : https://youtu.be/KjgfjJ7Ubb8

What happens when a current flows through a wire?

Description : What happens when a current flows through a wire?

Last Answer : Current can produce two effect one is heating effect and second is magnetic effect.

A 1000Ohm, 1 Watt resistor can safely pass a current of

Description : A 1000Ohm, 1 Watt resistor can safely pass a current of

Last Answer : A 1000 Ohm, 1 Watt resistor can safely pass a current of 30 mA

The disc of an instrument using eddy current damping should be of?

Last Answer : The disc of an instrument using eddy current damping should be of conducting and non-magnetic material.

Give the circuit analysis of current source inverter with resistive load.

Description : Give the circuit analysis of current source inverter with resistive load. What are the main difference between voltage source inverter and current source inverter?

Last Answer : Current source inverter (CSI): In current source inverter, the output current is independent of load. The input current of current source inverter is constant. Current source converter converts DC input current to ... are connected in parallel. In CSI diodes are connected in series.

Can a supernode contain a resistor?

Description : Can a supernode contain a resistor?

Last Answer : contain

How to find total impedance Z, current I and Impedance angle ?

Description : How to find total impedance Z, current I and Impedance angle ?

Last Answer : How to find total impedance Z, current I and Impedance angle ?

The diagonal elements of a nodal admittance matrix are strengthened by adding :

Description : The diagonal elements of a nodal admittance matrix are strengthened by adding :  (A) Shunt capacitors (C) Generators (B) Shunt inductances (D) Resistive loads

Last Answer : A

State the applications and specification of (i) Resistor (ii) Capacitor (iii)Inductor

Description : State the applications and specification of (i) Resistor (ii) Capacitor (iii)Inductor

Last Answer : Application of resistor: 1.Resistors are used in high frequency instrument. 2.Resistor is used in power control circuit. 3.It is used in DC power supplies. 4.Resistors are used ... DC Current  3.Electromagnetic Interference (EMI)  4.Magnetic Saturation Flux Density  5.Curie Temperature 

Define resistor and draw symbol of variable resistor.

Description : Define resistor and draw symbol of variable resistor.

Last Answer : Resistor: A resistor is an electrical component that limits or regulates the flow of electrical current in an electronic circuit. Symbol of variable resistor:   

Source transformation Replace the circuit with voltage source in series with a single resistor

Description : Source transformation Replace the circuit with voltage source in series with a single resistor

Last Answer : Source transformation Replace the circuit with voltage source in series with a single resistor

Which of the following is NOT a non-linear resistor?

Description : Which of the following is NOT a non-linear resistor? A) Varistor B) Precision resistor C) NTC thermistor D) PTC thermistor 

Last Answer : Which of the following is NOT a non-linear resistor? A) Varistor B) Precision resistor C) NTC thermistor D) PTC thermistor 

A resistor in which the resistance changes exponentially with change in temperature is called as

Description :  A resistor in which the resistance changes exponentially with change in temperature is called as A) Potentiometer B) Phototransistor C) Varactor D) Thermistor 

Last Answer :  A resistor in which the resistance changes exponentially with change in temperature is called as Thermistor 

In a 5 bit weighted resistor D/A converters, the resistor value corresponding to LSB is 40 kΩ, and the resistor

Description : In a 5 bit weighted resistor D/A converters, the resistor value corresponding to LSB is 40 kΩ, and the resistor value corresponding to MSB will be (A) 0.4 kΩ (B) 3 kΩ (C) 2.8 kΩ (D) 2.5 kΩ

Last Answer : In a 5 bit weighted resistor D/A converters, the resistor value corresponding to LSB is 40 kΩ, and the resistor value corresponding to MSB will be 2.5 kΩ 

An open resistor, when checked with an ohm-meter reads?

Description : An open resistor, when checked with an ohm-meter reads?

Last Answer : An open resistor, when checked with an ohm-meter reads infinite.

Standard resistor is made from?

Last Answer : Standard resistor is made from maganin.

Draw & explain touch plate switch using IC555.

Description : Draw & explain touch plate switch using IC555.

Last Answer : It is construct form monostable multivibrator , when metal plates touch by finger then voltage at pin number 2 goes to below 1/3 Vcc then output of lower comparator becomes high hence flip flop set and ... then output of timer goes low and it low till up to the metal plates touch by finger .

A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Description : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Last Answer : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Using phasors, determine in the following equations

Description : Using phasors, determine in the following equations

Last Answer : Using phasors, determine in the following equations

Logic Simplification Using Boolean Algebra

Description : Logic Simplification Using Boolean Algebra

Last Answer : Logic Simplification Using Boolean Algebra 1 : https://youtu.be/fuoSMm2dJMc Logic Simplification Using Boolean Algebra 2 : https://youtu.be/bfCdur2QcJ4 Logic Simplification Using Boolean Algebra 3 : ... .be/V02wz8gz1UU Logic Simplification Using Boolean Algebra 7 : https://youtu.be/rgnJKgFO-SU

Build using minimum number of CMOS gates.

Description : Build using minimum number of CMOS gates. Three input NAND gate. Two input NOR gate Three input NOR gate Two input AND gate Two input OR gate

Last Answer : Three input NAND gate. Two input NOR gate Three input NOR gate Two input AND gate Two input OR gate

The speed of a universal motor is generally reduced by using?

Last Answer : The speed of a universal motor is generally reduced by using gear trains.

What are the advantages of using Linux?

Description : What are the advantages of using Linux?

Last Answer : Advantages of Linux are as follows :Linux is open source and free.Linux Is multiuser and multitasking operating system.Linux is the stable operating system.Linux is reliable.Linux can be modify according to requirements.Linux is the secure operating system.

can we turn off thyristor using Gate?

Last Answer : No we cannot turn off normal thyristor using Gate.

How to write a structural analysis of a script?

Description : How to write a structural analysis of a script?

Last Answer : You should have a good introduction, explaining the environment and the characters.

Lewis PLC is breaking down and classifying costs to determine which are associated with specific marketing activities. Lewis is performing a A)marketing cost analysis. B)sales analysis. C)marketing audit. D)cost audit. E)variable cost analysis.

Description : Lewis PLC is breaking down and classifying costs to determine which are associated with specific marketing activities. Lewis is performing a A)marketing cost analysis. B)sales analysis. C)marketing audit. D)cost audit. E)variable cost analysis.

Last Answer : A)marketing cost analysis.

Magnetic Circuit and its Analysis

Description : Magnetic Circuit and its Analysis

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Mesh Analysis with two supermesh

Description : Mesh Analysis with two supermesh

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Mesh Analysis Example

Description : Mesh Analysis Example

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Sinusoidal Steady-State Analysis mesh analysis

Description : Sinusoidal Steady-State Analysis mesh analysis

Last Answer : Sinusoidal Steady-State Analysis mesh analysis

Apply phasor analysis to evaluate the following

Description : Apply phasor analysis to evaluate the following

Last Answer : Apply phasor analysis to evaluate the following

Mesh analysis problems

Description : Mesh analysis problems

Last Answer : Mesh analysis 1 : https://youtu.be/X_nWbAkDoH4 Mesh analysis 2 : https://youtu.be/-GzGDUZN56A Mesh analysis 3 : https://youtu.be/AsZlXbO_82M Mesh analysis 4 : https://youtu.be/D8zLPMFhwlg ... Mesh analysis 22 : https://youtu.be/XSOZ1urxvpc Mesh analysis 23 : https://youtu.be/wwBI15MznQY

Give four steps to solve mesh analysis.

Description : Give four steps to solve mesh analysis.

Last Answer : Steps to Solve Circuit using Mesh Analysis:  i) For a given planar circuit, convert each current source, if any, into voltage source,  ii) Assign a mesh current to each mesh. The direction ... find the mesh currents.  v) Using mesh currents then find the branch currents and branch voltages.

In a series RLC high Q circuit, the current peaks at a frequency

Description : In a series RLC high Q circuit, the current peaks at a frequency  (1) equal to the resonant frequency (2) greater than the resonant frequency (3) less than the resonant frequency (4) equal to half the resonant frequency

Last Answer : In a series RLC high Q circuit, the current peaks at a frequency equal to the resonant frequency

Which of the following theorems enables a number of voltage (or current) source to be combined directly into

Description : Which of the following theorems enables a number of voltage (or current) source to be combined directly into a single voltage (or current) source. (1) compensation theorem (2) reciprocity theorem (3) superposition theorem (4) Millman's theorem

Last Answer : Which of the following theorems enables a number of voltage (or current) source to be combined directly into a single voltage (or current) source. (1) compensation theorem (2) reciprocity theorem (3) superposition theorem (4) Millman's theorem

The line current in a balanced delta system is 30 A. The load current is

Description : The line current in a balanced delta system is 30 A. The load current is (A) 30√3 A (B) 30/√3 A (C) 10 A (D) 30/√2 A

Last Answer : The line current in a balanced delta system is 30 A. The load current is 30/√3 A

The internal resistances of an ideal current source, and an ideal voltage source are, respectively,

Description : The internal resistances of an ideal current source, and an ideal voltage source are, respectively, (A) 0, ∞ (B) ∞, ∞ (C) ∞, 0 (D) 0,0

Last Answer : The internal resistances of an ideal current source, and an ideal voltage source are, respectively, ∞, 0