Define Dielectric Strength for transformer oil. State its value for new transformer oil.

1 Answer

Answer :

Dielectric strength is defined as the maximum voltage that can be applied to across to the
Fulid with out electrical breakdown is called Dielectric strength.

Related questions

Description : The dielectric strength of transformer oil is expected to be?

Last Answer : The dielectric strength of transformer oil is expected to be 33 kV.

Description : Define earthing. State its types.  

Last Answer : Definition of earthing: * Earthing means connecting the metal body of electrical device to the general mass of earth by a wire of negligible resistance. OR * Earthing means connecting the metal body of ... ii) Pipe type earthing iii) Rod type earthing iv) Strip earthing v)Water main earthing

Description : What do you mean by active filter? State its advantages over passive filter . Define pass band & stop band with respect to filter.

Last Answer : Active Filter: Active Filter is formed by using active element along with the passive components.  Advantages of Active filter over Passive filter: High value of pass band gain can be obtained. It is ... pass band.  Stop Band Filter: The frequency range which is attenuated is known as stop band.

Description : Define : (i) Dielectric strength (ii) Breakdown voltage

Last Answer : (i) Dielectric strength: The voltage which a dielectric material can withstand without breaking down (without losing its dielectric property) is called its dielectric strength. It is represented by kV/mm ... or is no longer an insulator) for a specified thickness, is its breakdown voltage. 

Description : What is dielectric strength of an insulating material? What is its unit?

Last Answer : Dielectric Strength: The dielectric strength of an insulating material is the maximum voltage which the insulating medium can withstand without breakdown. Unit is volts per millimeter (V/mm), or kV/mm or kV/cm

Description : State the procedure for testing of earth pit resistance with necessary diagrams.

Last Answer : Following procedure (Method) for testing of earth pit resistance with necessary diagrams. 1) Earth Tester : i) Three point method ii) Four point method 2) By Potential drop method 3 ... of that earthing pit. In this test the accuracy is less but electrical rods are not required. 

Description : State the procedure for laying / installation of underground cable.  

Last Answer : 1) Direct laying Cable: or Trench laying method: Procedure: * For laying of a cable trench about 1.5m deep and 0.5m wide is made along the cable route. * A ... over. * Cables laid in this manner are usually plain lead covered because troughing affords good mechanical protection. 

Description : State the insulating materials used in motor. Write temperature class and withstand temperature ranges for them. 

Last Answer : The insulating materials used in motor are as belows: 1. Cotton, 2. Silk, or paper, 3. Press board, 4. Resins 5. PVC 6. Cellulose-Fiber, 7. Enameled coating, etc  ... Over 180° Mica, porcelain, ceramics, glass quartz, asbestos, treated glass fiber or treated asbestos. etc.

Description : State the material used for making (1) Magnetic Core (2) Fuse element  

Last Answer : The material used for making of:  (1) Magnetic Core : Iron, cobalt, Nickel, CRGO, HRGO , silicon steel  (2) Fuse Element: Tin- lead wire, Tinned copper wire 

Description : State suitable single phase motor for following applications: (i) Table fan (ii) Mixers and Grinders

Last Answer : Application Suitable Single Phase Motor Table Fan 1) Capacitor split phase motor 2) Capacitor start capacitor run motor Mixers and Grinders 1) Universal motor 2) A.C. Series motor

Description : State properties of conductor material used for overhead conductor. 

Last Answer : Following are the properties of conductor material:-   1. High conductivity :- Material should have high conductivity 2. High mechanical strength:- Material should have sufficiently high mechanical strength ... available & less costly. 9. Scrap Value: - Material should have high scrap value. 

Description : State design considerations for illumination scheme of commercial complex.

Last Answer : Design considerations for illumination scheme of commercial complex: * Tasks to be performed in the space * Desired light levels based on the tasks performed in the space * Room size ... conditions * Cleanliness of the area during operation * Maintenance schedule * Availability of daylight

Description : State the selection criterion of the lamp for various purposes.

Last Answer : Selection criterion of the lamp for various purposes:  While selecting a lamp for a particular purpose, the available lamps are compared on the basis of following criteria: * Light output ... such as ballasts * Compatibility with the electrical system * Suitability for the operating environment

Description : Define contract and state its types.

Last Answer : Definition of Contract:- The agreement between two parties under some specific terms and conditions is known as contract.  Types of Engineering contract:- 1) Lump sum contract 2) Item rate contract 3) ... contract 11)Cost plus(+) fluctuating fees rate contract 12) Cost plus(+) fix fee contract 

Description : Define Tender and state any three requirements of valid contract.

Last Answer : Meaning Tender:- Tender is offer or invitation of the work between any two parties. This offer may be written or non written. This offer is given by party no.1 (owner) to party no.2 ( ... . Contract should be signed by proper authorized persons. 6. It should be legally challenged in the court.

Description : Define service connection and state types connection and state types of overhead service connection

Last Answer : Service Connection:- It is the input conductor or wire which is carried out from supply company (authorities) pole to consumers' main board or premises. Types of overhead service ...  1. Overhead service connection with Bare conductor 2. Overhead service connection with weather proof cable  

Description : State any four dielectric materials.

Last Answer : Ceramics, distilled water, paper, mica, polyethylene, and glass. Metal oxides

Description : Write one application for the give dielectric material. (i) Polyvinyl Carbide(PVC) (ii) Glass (iii) Mica (iv) Cotton and Silk

Last Answer : (i) Polyvinyl Carbide(PVC):it is used in insulation of wires and cables in domestic wiring as well as in aircraft and factory wiring (any one)  (ii) Glass: 1) Alkaline glasses are used for ... with wax or varnishes are used in windings of magnet coils and small medium sized mechanics (any one) 

Description : The power factor of dielectric :  (A) is a function of temperature of the dielectric only (B) depends only on voltage stress to which the dielectric is stressed (C) always constant (D) both (A) and (B)

Last Answer : The power factor of dielectric :  (A) is a function of temperature of the dielectric only (B) depends only on voltage stress to which the dielectric is stressed (C) always constant (D) both (A) and (B)

Description : The bridge most suited for accurate measurement of relative permittivity of dielectric materials is (A) Carey Foster Bridge (B) Anderson’s bridge (C) Heaviside Bridge modified by Campbell. (D) Schering Bridge.

Last Answer : The bridge most suited for accurate measurement of relative permittivity of dielectric materials is Schering Bridge.

Description : The frequencies and voltage used in Dielectric heating are (A) 10 – 30 MHz, upto 25 kV (B) 50 – 60 Hz, upto 25 kV (C) 10 – 30 MHz, upto 100 V (D) 50 – 60 Hz, 110 V – 230 V

Last Answer : The frequencies and voltage used in Dielectric heating are 10 – 30 MHz, upto 25 kV

Description : Dielectric loss in a capacitor is best measured by (A) Wien Bridge (B) Schering Bridge (C) Anderson Bridge (D) Heaviside-Campbell Equal Ratio Bridge

Last Answer : Dielectric loss in a capacitor is best measured by Schering Bridge

Description : What is the difference between an insulator and a dielectric?

Last Answer : Dielectric is the another name for insulator.

Description : Define magnetic field strength and state its unit.

Last Answer : Magnetic field strength is the force experienced by a unit N-pole when placed at any point in a magnetic field is known as magnetic field strength or magnetizing force. Magnetising force or magnetic field ... unit of length is metre. So the unit of magnetic field strength is ampere turns per metre.

Description : 63 The dielectric strength of transformer oil is expected to be A. 1kV B. 33kV C. 100kV D. 330 kV

Last Answer : B. 33kv

Description : Has anyone (in this case a true warrior) ever made you feel like a giant ass, but in a really good way? (Someone that inspires you with their strength and determination)

Last Answer : I’m having a hard day today. Someone I really love and look up to has read me the riot act and made me feel terrible. It hasn’t or doesn’t help me or inspire me and it doesn’t make me feel good. Sorry it is just a really hard day and things are pretty rough.

Description : A magnetic circuit has effective iron length of 100 cm and it is wound with 800 turns of wire carries 1 A. Find the magnetic field strength.

Last Answer : magnetic field strength

Description : The electric breakdown strength of insulating materials depends on  (A) Nature of applied voltage (B) lmperfection of dielectric material (C) Pressure, temperature and humidity (D) All or these

Last Answer : The electric breakdown strength of insulating materials depends on  (A) Nature of applied voltage (B) lmperfection of dielectric material (C) Pressure, temperature and humidity (D) All or these

Description : Polarity Test of Transformer

Last Answer : Polarity Test of Transformer

Description : What's with the apparently endless confusion between it's and its?

Last Answer : Well, where my confusion came in is when you say “It’s foot was hurt….” Well, I saw that as a possessive, see? However, my boss taught HS English for a million years, so she quickly cerrekted me! Something about you only use the possessive with….nouns…?

Description : Explain the suitability of aluminium as an electrical conductor with respect to its mechanical and electrical properties. 

Last Answer : Following are requirements of conductor:- i) High conductivity :  Material should have high conductivity, So that * cross section of conductor (size) reduces, * Copper losses reduces, * So Efficiency ... . Boiling point is 1820°C 9. Specific gravity is 2.7 10. High resistance to corrosion. 

Description : Types of rolling mills and its applications

Last Answer : Types of rolling mills and its applications (1) Two-high rolling mill: used in blooming and slabbing mills (2) Three-high rolling mill: used for making plates or sections. (3) Four- ... : This mill is used for rolling stainless steel and other high strength steel sheets of thin gauge.

Description : What is PLL? Explain its operation with a block diagram.

Last Answer : PLL - A phase-locked loop or phase lock loop is a control system that generates an output signal whose phase is related to the phase of an input signal Block diagram  ... to the input frequency. The phase - locked loop goes through three states free running capture and phase lock.

Description : Magnetic Circuit and its Analysis

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : As used in survey

Last Answer : It's the operation of changing the face of telescope from left to right and vice versa.

Description : Does your state have a strong Citizens Arrest Law?

Last Answer : In Wisconsin, it’s not even clear if an airport security guard can detain someone he witnesses committing a crime on video monitor.

Description : Define : i) Maximum Value ii) RMS Value of ac supply

Last Answer : i) Maximum Value :- The maximum or peak value attained by an alternating quantity during positive or negative half cycle, is called maximum value or peak value.  ii) RMS Value of ac ... as produced by the alternating current when flowing through the same resistance and for the same time. 

Description : Define : i) Average value ii) RMS value of an AC Wave.

Last Answer : i) Average value: The average value is defined as the average of all instantaneous values during one alternation . That is, the ratio of the sum of all considered instantaneous values to the ... as produced by the alternating current when flowing through the same resistance for the same time.

Description : Define average value.

Last Answer : Average Value of Sinusoidal AC Waveform: The average value is defined as the arithmetical average or mean value of all the values of an alternating quantity over one cycle.  And/OR  For ... charge as is transferred by the alternating current during the same time under the same conditions. 

Description : Define RMS value.

Last Answer : RMS Value of Sinusoidal AC Waveform: The RMS value is the Root Mean Square value. It is defined as the square root of the mean value of the squares of the alternating quantity over one cycle ... power or heat as is produced by the alternating current during the same time under the same conditions.

Description : How impressive is my record for this physical challenge?

Last Answer : Cool, but I don’t think anyone would really care except you. What does hitting the headlight on your boat have to do with anything, I don’t get it. lol

Description : What beauty comes from tragedy?

Last Answer : answer:Henryk Mikolaj Górecki turned the tragedy of the Holocaust into incredibly beautiful, soul-stirring music, LENTO SOSTENUTO TRANQUILLO MA CANTABILE (from Symphony No. 3, Symphony of Sorrowful Songs ). Sorry, ... commercial to get through on YouTube, but it's worth it to listen to this music.

Description : Was there ever a bad time in your life that you later look upon with nostalgia?

Last Answer : answer:Definitely can relate; I even asked a similar question awhile back. For me it was being very ill; I know it sounds pretty mental to miss being ill, but sometimes when responsibilities pile up, I ... when my only priority was to get better. Usually I'm very glad to be healthy now, though.

Description : How can I stop being this sensitive?

Last Answer : Take your time making your mind up about a person. Value yourself and the time you give to people.:)

Description : Can Wii Fit help me gain muscle?

Last Answer : No. Even its aerobic “improvement” claims are often disputed.

Description : Is there anything that you have ever been through in your life where afterwards you realized that you're a stronger person than you thought previously?

Last Answer : Suicide of my first husband then later the suicide of my baby brother, who had found my first husband. The only way I survived was my kids and the Grace of God.

Description : List any four materials used for pattern making

Last Answer : The various types of materials used are as follows: 1. Wood 2. Metal. 3. Plastic. 4. Plaster. 5. Wax.

Description : Draw and explain V and inverted V curves for synchronous motor.

Last Answer : V curves' and inverted V curves' for Synchronous Motor:  V curve:  V curve is a plot of the stator current versus field current for different constant loads. The graph is plotted ... Vcurves of synchronous motor. The highest point on each of these curves indicates unity power factor.

Description : Write the ladder program for 24 hour clock.

Last Answer : Ladder Program for 24 hour clock:

Description : Give the expression for ABCD constant of T model.

Last Answer : Expression for ABCD constants of T model: