Why poles of dc machine are laminated?

Why poles of dc machine are laminated?
by

1 Answer

Answer :

Poles of DC machines are laminated to reduce the eddy current losses in the poles.
by

Related questions

Why does the speed of a DC shunt motor decrease as the load increases?

Description : Why does the speed of a DC shunt motor decrease as the load increases?

Last Answer : Because if the load is increasing then the torque must also be increase. If not then the speed of motor will decrease.

Why is the armature of DC generator laminated?

Description : Why is the armature of DC generator laminated?

Last Answer : The armature of DC generator is laminated to reduce eddy current losses.

What are the uses of Thermistors ?

Description : What are the uses of Thermistors ?

Last Answer : Thermistors are frequently used in electronic circuits in which it is desired to provide temperature measurement, temperature control, and temperature compensation.

State the different types of outdoor flood lighting and where are they used.

Description : State the different types of outdoor flood lighting and where are they used.

Last Answer : There are three types of projectors used for flood lighting :  a) Narrow beam Projector b) Medium angle Projector c) Wide angle Projector a) Narrow beam Projectors: - Light beam with such ... yards, stadiums, car parking area etc. 3) It is used for illuminating advertisements, boarding's etc.

The magnetic neutral plane shifts in a dc machine

Description : The magnetic neutral plane shifts in a dc machine (A) in the direction of motion of motor (B) in the direction of motion of generator (C) due to increase in the field flux (D) cause reduction of flash over between commutator segments

Last Answer : The magnetic neutral plane shifts in a dc machine in the direction of motion of generator

what are the losses in DC machine?

Last Answer : Iron loss, copper loss and mechanical losses these are the losses in DC machine.

Losses in dc machine..?

Last Answer : Copper losses,iron losses,variable losses , constant losees

Explain concept of back emf in DC machine. State how it governs armature current.

Description : Explain concept of back emf in DC machine. State how it governs armature current. 

Last Answer : Back emf: When the armature of DC machine rotates under the influence of driving torque, the armature conductors move in the magnetic field and cut it and hence emf is induced in them. The ... flow of armature current i.e. it automatically changes the armature current to meet load requirements.

A 200 V DC machine supplies 20 A at 200 V as a generator. The armature resistance is 0.2

Description : A 200 V DC machine supplies 20 A at 200 V as a generator. The armature resistance is 0.2 Ohm. If the machine is now operated as a motor at same terminal voltage and current but with the flux increased by 10%, the ratio of motor speed to generator speed is

Last Answer : A 200 V DC machine supplies 20 A at 200 V as a generator. The armature resistance is 0.2 Ohm. If the machine is now operated as a motor at same terminal voltage and current but with the flux increased by 10%, the ratio of motor speed to generator speed is 0.87

A 36 slot, 4 -pole, dc machine has a simplex lap winding with two conductors per slot. The back pitch and

Description : A 36 slot, 4 -pole, dc machine has a simplex lap winding with two conductors per slot. The back pitch and front pitch adopted could be respectively

Last Answer : A 36 slot, 4 -pole, dc machine has a simplex lap winding with two conductors per slot. The back pitch and front pitch adopted could be respectively 19,17

The induced emf in the armature of a lap -wound four -pole dc machine having 100 armature conductors

Description : The induced emf in the armature of a lap -wound four -pole dc machine having 100 armature conductors rotating at 600 rpm and with 1 Wb flux per pole is  (1) 1000V (2) 100V (3) 600V (4) 10,000V

Last Answer : The induced emf in the armature of a lap -wound four -pole dc machine having 100 armature conductors rotating at 600 rpm and with 1 Wb flux per pole is 1000V

Aluminium is not used as winding wire for the armature of a dc machine because

Description : Aluminium is not used as winding wire for the armature of a dc machine because  (1) aluminium has low resistivity (2) a large winding space is taken by aluminium conductors and creates ... ) the thermal conductivity of aluminium is low (4) aluminium has low conductivity as compared to copper

Last Answer : Aluminium is not used as winding wire for the armature of a dc machine because  (2) a large winding space is taken by aluminium conductors and creates jointing problems (3) the thermal conductivity of aluminium is low (4) aluminium has low conductivity as compared to copper

In a dc machine, interpoles are used to

Description : In a dc machine, interpoles are used to  (1) neutralize the effect of armature reaction in the interpolar region (2) generate more induced emf in the armature (3) avoid interference of the armature flux with the main -field flux (4) reduce the demagnetizing effect of armature reaction

Last Answer : In a dc machine, interpoles are used to neutralize the effect of armature reaction in the interpolar region

What is the percentage of stray losses in DC machine?

Description : What is the percentage of stray losses in DC machine?

Last Answer : Percentage of stray losses in DC machine is about 1 % .

Brushes of DC machine are made up of ?

Description : Brushes of DC machine are made up of ?

Last Answer : Brushes of DC machine are made up of carbon.

Types of slotting machine

Description : Types of slotting machine

Last Answer : 1. Puncher slotter 2. Precision slotter 3. Production slotter  Working Principle of Slotting machine:- The slotting machine is a reciprocating machine tool in which, The vertical slide holding the cutting ... longitudinal and cross feeds, a rotary feed motion is also provided in the work table. 

Laminated cores, in electrical machines, are used to reduce?

Description : Laminated cores, in electrical machines, are used to reduce?

Last Answer : Laminated cores, in electrical machines, are used to reduce eddy current loss.

In AC. circuits, laminated iron is invariably used in order to?

Description : In AC. circuits, laminated iron is invariably used in order to?

Last Answer : In AC. circuits, laminated iron is invariably used in order to reduce eddy current loss.

Why does the core of a transformer need to be laminated?

Description : Why does the core of a transformer need to be laminated?

Last Answer : Transformer cores are laminated to reduce eddy current loss.

why the Transformer core is laminated?

Last Answer : Transformer core is laminated to reduce Eddy current losses.

How to Clean Laminated Floors ?

Description : How to Clean Laminated Floors ?

Last Answer : How to Clean Laminated Floors Laminated floors offer beauty and style just like hardwood or stone floors, but with much easier maintenance. Made with dense fibers and wood particles, the flooring material is ... indoors. Clean up spills as soon as possible for easier removal, and you're all set.

In a D.C. machine stray loss is the sum of?

Last Answer : In a D.C. machine stray loss is the sum of iron loss and mechanical loss.

To avoid formation of grooves in the commutator of a D.C. machine?

Last Answer : To avoid formation of grooves in the commutator of a D.C. machine the brushes of opposite polarity should track each other.

Open circuited armature coil of a D.C. machine is?

Last Answer : Open circuited armature coil of a D.C. machine is identified by the scarring of the commutator segment to which open circuited coil is connected and indicated by a spark completely around the commutator.

In case of D.C. machine winding, number of commutator segments is equal to?

Last Answer : In case of D.C. machine winding, number of commutator segments is equal to number of armature coils.

Iron losses in a D.C. machine are independent of variations in?

Last Answer : Iron losses in a D.C. machine are independent of variations in load.

In a four-pole D.C. machine?

Last Answer : In a four-pole D.C. machine alternate poles are north and south.

State the modification to be done in dc series motor to work satisfactorily as ac series motor. State applications of ac series motor.

Description : State the modification to be done in dc series motor to work satisfactorily as ac series motor. State applications of ac series motor.

Last Answer : Modifications are necessary in a dc series motor so that it operates satisfactorily on ac supply. The modifications are as follows:  1) AC series motor is built with a few field turns as ... and grinders 5) High speed vacuum cleaners 6) Sewing machines 7) Food processors 8) Drilling machine 

What is the time response of a system whose poles lie on the right hand side of s-plane?

Description : What is the time response of a system whose poles lie on the right hand side of s-plane? A) Exponentially increasing B) Exponentially decreasing C) Sinusoidal oscillations D) Step response 

Last Answer : What is the time response of a system whose poles lie on the right hand side of s-plane? A) Exponentially increasing B) Exponentially decreasing C) Sinusoidal oscillations D) Step response 

The number of poles of 8/6 stepper motor can be :

Description : The number of poles of 8/6 stepper motor can be :

Last Answer : The number of poles of 8/6 stepper motor can be : 4

After drawing the Root-Locus, the closed-loop poles corresponding to a specified value of gain K can be

Description : After drawing the Root-Locus, the closed-loop poles corresponding to a specified value of gain K can be determined from which of the following criterion ? (A) Magnitude criterion alone (B) Angle criterion alone (C) Both Magnitude and Angle criteria (D) Angle of departure and angle of arrival.

Last Answer : After drawing the Root-Locus, the closed-loop poles corresponding to a specified value of gain K can be determined from which of the following criterion ? (A) Magnitude criterion alone (B) Angle ... (C) Both Magnitude and Angle criteria (D) Angle of departure and angle of arrival.

lf the poles of system are lying on the imaginary axis in s-plane, then the system will be

Description : lf the poles of system are lying on the imaginary axis in s-plane, then the system will be

Last Answer : lf the poles of system are lying on the imaginary axis in s-plane, then the system will be marginally stable

What are Sandals

Description : What are Sandals

Last Answer : Sandals refer to an open type of footwear that has soles held together by straps that cross and pass the instep of the feet and the ankle. The most distinguishing feature of a pair of sandals is that ... event, you can choose between a pair of flats that is bejeweled and a strappy high heeled pair.

why AC current is smaller than DC current

Description : why ACcurrent is smaller than DC current

Last Answer : AC current is not always smaller than DC.

State the function of following parts of DC motor : i) Yoke ii) Poles iii) Field winding iv) Commutator.

Description : State the function of following parts of DC motor : i) Yoke ii) Poles iii) Field winding iv) Commutator. 

Last Answer : Function : i) Yoke: The yoke serves the following two purposes. i) It supports the other components such as poles and provides mechanical protection for whole machine. ii) It forms a part of ... one pole to another and thus to help the motor to develop a continuous and unidirectional torque  

Electrical specifications with values for washing machine.

Description : Electrical specifications with values for washing machine. 

Last Answer : 1. Type: Top loading / Front loading type 2. Capacity range: 6kg to 15kg 3. Motor Used: Induction motor 4. Input voltage: 100V- 240V 5. Power: in 1200W / Output power 100–400W{can go upto 1000W) 6. Efficiency: Max efficiency 31% 7. Wattage: 2.100-2.400 W 8. Current: 13A 9. Frequency: 50hz

function of exposer in photocopier machine.

Description : function of exposer in photocopier machine.

Last Answer : A bright lamp illuminates the original document, and the whitws areas of the original document reflect the light onto the surface of the photoconductive drum. The areas of the drum that are exposed ... discharge to the ground. The areas of the drum not exposed to light remains negatively charged

Draw block diagram for CNC drilling machine and explain its working.

Description : Draw block diagram for CNC drilling machine and explain its working.

Last Answer : Block diagram consist of the following points:  Machine tool with DC servo motor as feedback element. The transducer is added as adaptive control application.  The auxiliary controller ... line.  The interrupt pulses are generated by TBG and supplied to computer through inter

Why inductor current lags inductor voltage ?

Description : Why inductor current lags inductor voltage ?

Last Answer : Inductor is a wire wounding structure having a core material it induces emf which is opposite to the voltage supply and proportional to rate of change of current so current lags the voltage in inductor

What is the function of the roll forming machine ?

Description : What is the function of the roll forming machine ?

Last Answer : It is much easier to make croissants and other dinner rolls with a roll forming machine, than it is to roll the croissants by hand. The primary function, therefore, is to take the mixed dough and to thin it, then fold it, to prepare the dough for baking.

How to Repair a Washing Machine

Description : How to Repair a Washing Machine

Last Answer : How to Repair a Washing Machine One of the modern conveniences that most people cannot live without is their washing machine. Washing machines have become extremely commonplace in today's homes and while ... store for more information on fixing it, or whether it is worth replacing the entire unit.

How to Repair a Sewing Machine

Description : How to Repair a Sewing Machine

Last Answer : How to Repair a Sewing Machine As being one of the more heavy-duty appliances, sewing machines can provide many years of reliable use. Often they do need to be cleaned out due to the excess ... it does, you will have to increase the belt's tension by shifting the motor-mountain screws again.

How to Thread a Sewing Machine

Description : How to Thread a Sewing Machine

Last Answer : How to Thread a Sewing Machine So you finally found a pattern you want to sew. You've got your mom's trusty sewing machine out, but before you can start sewing away, you must first learn to thread the ... be an easy task. Soon, you'll be a whiz at threading a sewing machine and at sewing, too!

How to Clean a Washing Machine

Description : How to Clean a Washing Machine

Last Answer : How to Clean a Washing Machine You need a washing machine to clean all your clothes and have them smelling clean, so have you ever thought about what it takes to keep the actual machine clean? ... of the washing machine dry. Repeat cleaning the front load washing machine at least once a month.

10 Benefits of climber machine

Description : 10 Benefits of climber machine

Last Answer : 10 Benefits of climber machine The climber machine is tall, slim machine pinched away in the corner of the gym. Maybe you've seen someone on it apparently with his personal trainer in ferry. It's ... that will give more strength to the arms and legs and will increase the strength of the body too.

How to choose a rowing machine and how to use it?

Description : How to choose a rowing machine and how to use it?

Last Answer : Many people know that it is easy to calculate rowing athletes against the background of other people by a special article. The beauty of their figure is formed during rowing sessions, which provide an ... times for 10 minutes with 10-minute breaks, this will be tantamount to one 30-minute lesson.

Capsule coffee machine. What are the advantages?

Description : Capsule coffee machine. What are the advantages?

Last Answer : Having a coffee maker in the house helps us to easily cheer up and brighten up the beginning of the upcoming day in the morning, especially if the weather is unpleasant. A cup of hot ... favor is the fact that the profile of this manufacturer is precisely capsule coffee makers and coffee capsules.

How to choose a washing machine?

Description : How to choose a washing machine?

Last Answer : How to choose a washing machine? When choosing a washing machine, first of all, you need to think about the future location of its placement. According to what space you have, choose: ... occurs using a fairly simple method - the machine includes an additional rinse cycle. Enjoy the shopping!

Explain the basic parts of a slotting machine with neat sketch.

Description : Explain the basic parts of a slotting machine with neat sketch. 

Last Answer : Base or Bed The base is rigidly built to take up all the cutting forces and the entire load of the machine. The top of the bed is accurately finished to provide guideways on which ... return mechanism. 2. Variable speed reversible motor drive mechanism. 3. Hydraulic drive mechanism.

Write down the basic parts of a lathe machine with their proper functions.

Description : Write down the basic parts of a lathe machine with their proper functions. 

Last Answer : Important Parts of Lathe and their Functions 1. Bed It is the main body of the machine. All main components are bolted on it. It is usually made by cast iron due to its high compressive strength and ... carriage on bed. 12. Spindle: It is the main part of lathe which holds and rotates the chuck.