State different types of electrical signal and draw all types of waveforms.

State different types of electrical signal and draw all types of waveforms.
by

1 Answer

Answer :

Types of electrical signals

1) Sine wave

2) Triangular wave

3) Square wave


Waveforms

image

by

Related questions

Draw the block diagram of regulated power supply, explain function of each block and draw waveforms of each stage.

Description : Draw the block diagram of regulated power supply, explain function of each block and draw waveforms of each stage.

Last Answer : 1. A step down transformer 2. A rectifier 3. A filter 4. A regulator Operation of Regulated Power Supply:- Step Down Transformer:- A step down transformer will ... regulator. A regulator will maintain the output constant even when changes at the input or any other changes occur.

State the different types of outdoor flood lighting and where are they used.

Description : State the different types of outdoor flood lighting and where are they used.

Last Answer : There are three types of projectors used for flood lighting :  a) Narrow beam Projector b) Medium angle Projector c) Wide angle Projector a) Narrow beam Projectors: - Light beam with such ... yards, stadiums, car parking area etc. 3) It is used for illuminating advertisements, boarding's etc.

State different types of holders used in wiring installation.

Description : State different types of holders used in wiring installation.

Last Answer : Following types of holders used in wiring installation: 1. Pendent Holder 2. Batten Holder 3. Angle holder 4. Screwed holder 

State the purpose of lighting control. List the different types of dimmer.

Description : State the purpose of lighting control. List the different types of dimmer.

Last Answer : Purpose of Lighting Control:- 1. To turn ON or OFF the lamps 2. For dimming: The dimming control permits the adjustment of lighting over a range. 3. For changing the lighting levels ... operated dimmer 6) Triac operated Dimmer 7) PWM (Pulse width modulation) Controlled technique.

List different types of stepper motor. State one application of stepper motor.

Description : List different types of stepper motor. State one application of stepper motor.

Last Answer : Types of stepper motor : (i)Variable - reluctance motor (ii) Permanent- magnet motors (iii) Hybrid motors. Applications of stepper motor : In robotics, In CNC machines, In computers, printers, ... In Watches, In biomedical applications such as X-ray machines, CT scan, In Process control systems. 

Give different types of IC.

Description : Give different types of IC.

Last Answer : 1. Analog IC 2. Digital IC 3. Thin and thick film ICs 4. Monolithic ICs 5. Hybrid or multichip ICs

Define resistor and draw symbol of variable resistor.

Description : Define resistor and draw symbol of variable resistor.

Last Answer : Resistor: A resistor is an electrical component that limits or regulates the flow of electrical current in an electronic circuit. Symbol of variable resistor:   

List the different types of tariff.

Description : List the different types of tariff.

Last Answer : Various types of Tariff:-  1) Flat-demand Tariff  2) Simple-demand Tariff or Uniform Tariff  3) Flat-rate Tariff  4) Step-rate Tariff  5) Block-rate Tariff  6) Two-part Tariff  7) Maximum demand Tariff ... c) KW and KVAR Tariff 10) TOD (Time of Day) Tariff 11) TOU ( Time of Usage) Tariff

State the types of protections provided by MCB.

Description : State the types of protections provided by MCB. 

Last Answer : The types of protections provided by MCB: 1. MCB provides short circuit protection. 2. MCB provides overload protection

State two types of Electronic dimmer.

Description : State two types of Electronic dimmer.

Last Answer : Two types of electronic dimmers are: 1) S.C.R. operated dimmer 2) Triac operated dimmer 

Types of rolling mills and its applications

Description : Types of rolling mills and its applications

Last Answer : Types of rolling mills and its applications (1) Two-high rolling mill: used in blooming and slabbing mills (2) Three-high rolling mill: used for making plates or sections. (3) Four- ... : This mill is used for rolling stainless steel and other high strength steel sheets of thin gauge.

Define Multivibrator. State the types of multivibrator. Which M/V can be used as a flip-flop? Draw the circuit diagram.

Description : Define Multivibrator. State the types of multivibrator. Which M/V can be used as a flip-flop? Draw the circuit diagram.

Last Answer : Definition:- A multivibrator is an electronic circuit that switches rapidly by means of positive feedback between two or more states.  OR  A multivibrator is an electronic circuit used to implement a ... Bistable Multivibrator: it can operate as a flip-flop, Circuit diagram 

State the type of insulating materials under Class Y and Class B.

Description : State the type of insulating materials under Class Y and Class B.

Last Answer : The type of insulating materials under Class Y : 1. Cotton  2. Silk 3. Paper 4. Rubber 5. PVC The type of insulating materials under Class B: 1. Backelite 2. Impregnated varnish 3. Mica 4. Fiber glass 5. Asbestos 

State the impact of inductance and resistance on transmission line performance

Description : State the impact of inductance and resistance on transmission line performance

Last Answer : Impact of inductance on transmission line: 1) It causes IXL drop in transmission line which affects regulation. 2) It is the only parameter which decides power transmission capacity of line i. ... is very small, it causes losses, temperature rise& poor voltage regulation so it cannot be neglected

State the needs and benefits of star labelling.

Description : State the needs and benefits of star labelling. 

Last Answer : Needs of star labelling: * Star labelling is meanly required to recognize quality of product * Star labelling is also required to determine life and efficiency of the product. * Star labels ... emission and air pollution will be reduces. 5. Market efficiency and compilation will be improve. 

State the various lighting calculations methods and Describe any one of them.

Description : State the various lighting calculations methods and Describe any one of them.

Last Answer : Lighting calculation methods: 1. Lumens or Light flux method 2. Point to point or Inverse Square law method 3. Watts per Square meter method i) Lumens or Light ... is taken according to the illumination desired on an average value considering overall efficiency of the lighting system.

Explain the suitability of aluminium as an electrical conductor with respect to its mechanical and electrical properties.

Description : Explain the suitability of aluminium as an electrical conductor with respect to its mechanical and electrical properties. 

Last Answer : Following are requirements of conductor:- i) High conductivity :  Material should have high conductivity, So that * cross section of conductor (size) reduces, * Copper losses reduces, * So Efficiency ... . Boiling point is 1820°C 9. Specific gravity is 2.7 10. High resistance to corrosion. 

different types of errors occurs in measurement.

Description : different types of errors occurs in measurement.

Last Answer : Generally errors are classified into three types: systematic errors, random errors and blunders. 1) Gross Errors 2) Random Errors 3) Systematic Errors Instrumental Errors Environmental ... to wrong observations or reading in the instruments particularly in case of energy meter reading. 

List the different types of frequency meters.

Description : List the different types of frequency meters.

Last Answer : Different types of frequency meters  1. Reed type [Mechanical type] 2. Ferro-dynamic type [Resonances type] 3. Weston type 4. Ratio-meter type 5. Saturable core type 6. Digital type

List different types of FET.

Description : List different types of FET.

Last Answer : Types of FETs:  1. Junction FET (JFET) i. N-Channel JFET ii. P-Channel JFET  2. MOSFET i. E-MOSFET ii. D-MOSFET 

What are the different types of capacitors?

Description : What are the different types of capacitors?

Last Answer : (b) is facilitated by telomerase

Draw the block diagram of PLC.

Description : Draw the block diagram of PLC.

Last Answer : Block diagram of PLC and input/output devices used for PLC Input/output devices - The input module has bank of terminals for physically connecting input devices, like push buttons, limit switches etc. ... is to translate signals from the PLC's CPU into a form that the output device can use.

Draw equivalent circuit of alternator.

Description : Draw equivalent circuit of alternator.

Last Answer : Equivalent circuit of alternator

Draw block diagram of PLL as a FM demodulator. Explain function of each block.

Description : Draw block diagram of PLL as a FM demodulator. Explain function of each block.

Last Answer : Operation:  The FM signal which is to be demodulated is applied at the input of the PLL.  the PLL is locked to the FM  The error voltage produced at ... using PLL ensures a high Linearity, between the instantaneous input frequency and VCO control voltage (error amplifier output)

Draw & explain operation of phase detector.

Description : Draw & explain operation of phase detector.

Last Answer : In phase detector, the op-Amp basically acts as a zero crossing detector. If a sine wave is applied at the i/p, we get square wave at the op-Amp o/p (at point ... to two channel of the CRO. The time duration between the pulses corresponding to voltages represent the phase between them. 

Draw the symbol of LED & photodiode.

Description : Draw the symbol of LED & photodiode. 

Last Answer : Symbol of LED & photodiode

State advantages of MOSFET.

Description : State advantages of MOSFET.

Last Answer : Advantages of MOSFET * MOSFETs provide greater efficiency while operating at lower voltages. * Absence of gate current results in high input impedance. * High switching speed. * They operate at lower ... due to lower resistance of channel. * They are easy to manufacture. * They are portable.

Draw and explain V and inverted V curves for synchronous motor.

Description : Draw and explain V and inverted V curves for synchronous motor.

Last Answer : V curves' and inverted V curves' for Synchronous Motor:  V curve:  V curve is a plot of the stator current versus field current for different constant loads. The graph is plotted ... Vcurves of synchronous motor. The highest point on each of these curves indicates unity power factor.

What is Phase sequence? Draw waveforms of 3 phase emf.

Description : What is Phase sequence? Draw waveforms of 3 phase emf.

Last Answer : Phase sequence: It is the order in which the three phases reach their peak or maximum values. It is shown in below fig. the phase sequence is A-B-C (or R-Y-B). In the following waveforms, it is ... 120º, B- phase voltage attains its positive maximum value. So the phase sequence is R-Y-B. 

Define Analog Transducer and give examples of it

Description : Define Analog Transducer and give examples of it

Last Answer : Analog Transducer: An analog transducer is a device that converts the input signal into a continuous DC signal of voltage or current. Examples: * Strain gauge * L.V.D.T * Thermocouple * Thermistor

Define earthing. State its types.

Description : Define earthing. State its types.  

Last Answer : Definition of earthing: * Earthing means connecting the metal body of electrical device to the general mass of earth by a wire of negligible resistance. OR * Earthing means connecting the metal body of ... ii) Pipe type earthing iii) Rod type earthing iv) Strip earthing v)Water main earthing

Define contract and state its types.

Description : Define contract and state its types.

Last Answer : Definition of Contract:- The agreement between two parties under some specific terms and conditions is known as contract.  Types of Engineering contract:- 1) Lump sum contract 2) Item rate contract 3) ... contract 11)Cost plus(+) fluctuating fees rate contract 12) Cost plus(+) fix fee contract 

Define service connection and state types connection and state types of overhead service connection

Description : Define service connection and state types connection and state types of overhead service connection

Last Answer : Service Connection:- It is the input conductor or wire which is carried out from supply company (authorities) pole to consumers' main board or premises. Types of overhead service ...  1. Overhead service connection with Bare conductor 2. Overhead service connection with weather proof cable  

State the types of wind turbines.

Description : State the types of wind turbines. 

Last Answer : The types of Wind Turbines:-  1) Vertical axis wind turbine (VAWT)   2) Horizontal axis wind turbine (HAWT)   i) Up wind HAWT   ii) Down Wind HAWT  OR  The types of wind turbines:-  1. Small size wind turbine  2. Medium size wind turbine  3. Large size wind turbine 

List different starting methods of three phase synchronous motor. Explain any one of them.

Description : List different starting methods of three phase synchronous motor. Explain any one of them.

Last Answer : Different Starting Methods of Three Phase Synchronous Motor: As synchronous motor is not self starting, different methods of starting are as follows: 1) By using an Induction (Pony) motor 2) ... . The rotor gets pulled into synchronism and starts running at constant speed as a synchronous motor. 

Types of slotting machine

Description : Types of slotting machine

Last Answer : 1. Puncher slotter 2. Precision slotter 3. Production slotter  Working Principle of Slotting machine:- The slotting machine is a reciprocating machine tool in which, The vertical slide holding the cutting ... longitudinal and cross feeds, a rotary feed motion is also provided in the work table. 

List types of chips produced in machining process.

Description : List types of chips produced in machining process.

Last Answer : The various types of chips produced in machining process are as follows: 1. Continuous chips: According to its name, continuous chips have a continuous segment. . 2. Discontinuous chips or segmental chips: ... chip is same as the continuous chips except a built edge is form at the face of tool.

List types of timers.

Description : List types of timers.

Last Answer : Types of Timers: Retentive Timers: 1. ON Delay 2. OFF Delay Non Retentive Timers: 1. ON Delay 2. OFF Delay

In which of the following waveforms is RMS voltage equal to the average voltage?

Description : In which of the following waveforms is RMS voltage equal to the average voltage? A) Triangle wave B) Square wave C) Sine wave D) None of these

Last Answer : In which of the following waveforms is RMS voltage equal to the average voltage? A) Triangle wave B) Square wave C) Sine wave D) None of these

Which of the following waveforms has the lowest form factor?

Description : Which of the following waveforms has the lowest form factor? A) Sine wave B) Square wave C) Sawtooth wave D) Triangle wave

Last Answer : Which of the following waveforms has the lowest form factor? A) Sine wave B) Square wave C) Sawtooth wave D) Triangle wave

State the procedure for testing of earth pit resistance with necessary diagrams.

Description : State the procedure for testing of earth pit resistance with necessary diagrams.

Last Answer : Following procedure (Method) for testing of earth pit resistance with necessary diagrams. 1) Earth Tester : i) Three point method ii) Four point method 2) By Potential drop method 3 ... of that earthing pit. In this test the accuracy is less but electrical rods are not required. 

State the procedure for laying / installation of underground cable.

Description : State the procedure for laying / installation of underground cable.  

Last Answer : 1) Direct laying Cable: or Trench laying method: Procedure: * For laying of a cable trench about 1.5m deep and 0.5m wide is made along the cable route. * A ... over. * Cables laid in this manner are usually plain lead covered because troughing affords good mechanical protection. 

State any two advantages of MCB over Fuse. State the standard specifications of MCB available in the market.

Description : State any two advantages of MCB over Fuse. State the standard specifications of MCB available in the market.  

Last Answer : Following advantages of MCB over Fuse: 1. No need of replacement of fuse wire. 2. Manually restore of supply is simple. 3. Fault understanding by visual inspection 4. More safe than fuse The standard specifications of ... 6A, 10A,16A,20A, 25A, 30A, 32A, 40A, 50A, 60A and 63A 6. 250V and 450 v

State two applications of : (i) PVC paper (ii) Porcelain with type of class based on withstand temperature is insulating material.

Description : State two applications of : (i) PVC paper (ii) Porcelain with type of class based on withstand temperature is insulating material. 

Last Answer :  (i) Application of PVC paper : 1. It is used in slot lining or motor winding insulation purpose 2. For Insulation of Transformer winding (ii) Application of Porcelain : 1. Mainly used for manufacturing ... on withstand temperature : * H' & C' Class of insulation i e. 180° and above 180°C 

State the applications of TIG welding.

Description : State the applications of TIG welding.

Last Answer : The applications of TIG welding are as follows: 1. Mostly used to weld aluminum and aluminum alloys. 2. It is used to weld stainless steel, carbon base alloy, copper base alloy, nickel base alloy etc. 3. It is used to welding dissimilar metals. 4. It is mostly used in aerospace industries.

State the applications of rolling.

Description : State the applications of rolling.

Last Answer : Applications of rolling are as follows: 1. Concrete reinforcing bars. 2. Plates. 3. Wire rods. 4. Sheet and strip. 5. Rails. 6. Piping and tubes. 7. Body panels. 8. Construction materials

State the modification to be done in dc series motor to work satisfactorily as ac series motor. State applications of ac series motor.

Description : State the modification to be done in dc series motor to work satisfactorily as ac series motor. State applications of ac series motor.

Last Answer : Modifications are necessary in a dc series motor so that it operates satisfactorily on ac supply. The modifications are as follows:  1) AC series motor is built with a few field turns as ... and grinders 5) High speed vacuum cleaners 6) Sewing machines 7) Food processors 8) Drilling machine 

State advantages of rotating field type alternators.

Description : State advantages of rotating field type alternators. 

Last Answer : Advantages of Rotating Field Type Alternator: 1) For high-voltage alternator, large space is required to accommodate conductors with insulation, as high voltage is induced in them. If field poles are placed ... is kept rotating. 8) Rotating field is comparatively light and can run with high speed. 

State advantages of short pitch winding over full pitch winding in alternators.

Description : State advantages of short pitch winding over full pitch winding in alternators. 

Last Answer : Advantages of Short Pitch Winding over Full Pitch Winding in Alternators: 1) Short pitching reduces the amount of copper needed for end connection when compared with full pitched coil. 2) They ... reduced, thereby increasing the efficiency. 4) The power quality of generated emf is improved. 

State the need of automation.

Description : State the need of automation. 

Last Answer : Need of Automation in Process : * To fulfill the demand of product at right time. * To reduce the human errors and involvement of human being in the process. * For better productivity. * For better ... of process. * For better quality. * For reducing man power. * For reducing cost of product.