State the applications and specification of (i) Resistor (ii) Capacitor (iii)Inductor

State the applications and specification of (i) Resistor (ii) Capacitor (iii)Inductor
by

1 Answer

Answer :

Application of resistor:

1.Resistors are used in high frequency instrument.

2.Resistor is used in power control circuit.

3.It is used in DC power supplies.

4.Resistors are used in filter circuit networks.

5.It is used in amplifiers, oscillators, telecommunication and digital multimeter.

6.It is used in wave generators.

Applications of capacitor: 

1.Use for capacitors is energy storage. 

2.Additional uses include power conditioning, signal coupling or decoupling, electronic noise filtering, and remote sensing. 

Applications of Inductors: 

1.Filters 

2.Sensors 

Specifications of Resistor: 

1.Temperature Coefficient. 

2.Size or value of a resistor 

3.Power Dissipation / wattage 

4.Tolerance 

5.Thermal Stability 

6.Frequency Response. 

7.Power De-rating. 

8.Maximum Temperature. 

9.Maximum Voltage. 


Capacitor specifications: 

1.Capacitance value 

2.Tolerance 

3.Working voltage 

4.Dielectric 

5.Working temperature 

6.Temperature coefficient 


Inductor Specification: 

1.DC Resistance (DCR) 

2.Maximum DC Current 

3.Electromagnetic Interference (EMI) 

4.Magnetic Saturation Flux Density 

5.Curie Temperature 

by

Related questions

Write applications of each of the following:(i) Fuse (ii) MCB (iii) MCCB.

Description : Write applications of each of the following:(i) Fuse (ii) MCB (iii) MCCB.

Last Answer : i) Applications of fuse:  * Used in domestic installations to provide short circuit protection.  * Used in commercial / Industrial installations to provide overload and short circuit protection.  * Used in ...  * Rectifiers panels,  * U.P.S, Electronic equipment,  * Motors,  * Furnaces

Define: i) Input Offset Voltage ii) Input offset Current iii) Input Bias Current iv) Output offset voltage

Description : Define: i) Input Offset Voltage ii) Input offset Current iii) Input Bias Current iv) Output offset voltage

Last Answer : Definition of parameters of OPAMP is follows:  i) Input Offset Voltage: Input offset voltage is defined as the voltage that must be applied between the two input terminals of an OPAMP to null or ... to ground) and output voltage is obtained non zero such voltage is output offset voltage of opamp.

State two applications of : (i) PVC paper (ii) Porcelain with type of class based on withstand temperature is insulating material.

Description : State two applications of : (i) PVC paper (ii) Porcelain with type of class based on withstand temperature is insulating material. 

Last Answer :  (i) Application of PVC paper : 1. It is used in slot lining or motor winding insulation purpose 2. For Insulation of Transformer winding (ii) Application of Porcelain : 1. Mainly used for manufacturing ... on withstand temperature : * H' & C' Class of insulation i e. 180° and above 180°C 

State suitable single phase motor for following applications: (i) Table fan (ii) Mixers and Grinders

Description : State suitable single phase motor for following applications: (i) Table fan (ii) Mixers and Grinders

Last Answer : Application Suitable Single Phase Motor Table Fan 1) Capacitor split phase motor 2) Capacitor start capacitor run motor Mixers and Grinders 1) Universal motor 2) A.C. Series motor

Explain the lighting scheme to be designed for each of the following: i) Special ward in hospitals ii) Dentist’s Cabin

Description : Explain the lighting scheme to be designed for each of the following: i) Special ward in hospitals ii) Dentist’s Cabin 

Last Answer : i) Special ward in hospital: For the patients in the wards, lighting should create a cozy and pleasant atmosphere. Lighting in the wards should be planned in such a way that it meets the specific ... we use such as cements and bonding agents that we use to restore your teeth back to health.

Compare the salient features of LED and CFL based on: i] Lamp Efficiency ii] Life span

Description :  Compare the salient features of LED and CFL based on: i] Lamp Efficiency ii] Life span 

Last Answer : Parameter LED CFL Lamp Efficiency  High (more than 70 lumen per watt) Comparatively less (50-60 lumen per watt) Life span (in working hours) 10000 3000

A capacitor-start single phase induction motor is switched on to supply with its capacitor replaced by...

Description : A capacitor-start single phase induction motor is switched on to supply with its capacitor replaced by an inductor of equivalent reactance value. It will?

Last Answer : A capacitor-start single phase induction motor is switched on to supply with its capacitor replaced by an inductor of equivalent reactance value. It will not start at all.

List specification of BJT.

Description : List specification of BJT.

Last Answer : * The bipolar junction transistor (BJT) has small signal current gain, α (hfb). * Maximum collector current Ic (max). * Maximum collector to emitter voltage, VCE (max). * Collector to emitter ... . * Collector to emitter cut off voltage, VCEO. * Base emitter saturation voltage, VBE (sat).

An inductor of Q factor 10 is connected in series with a capacitor having a Q factor of 100. The overall Q factor

Description : An inductor of Q factor 10 is connected in series with a capacitor having a Q factor of 100. The overall Q factor of the circuit is :  (A) 100/11 (B) 11/100 (C) 110 (D) 1000

Last Answer : An inductor of Q factor 10 is connected in series with a capacitor having a Q factor of 100. The overall Q factor of the circuit is : 100/11

Define resistor and draw symbol of variable resistor.

Description : Define resistor and draw symbol of variable resistor.

Last Answer : Resistor: A resistor is an electrical component that limits or regulates the flow of electrical current in an electronic circuit. Symbol of variable resistor:   

List specification of 3G W- CDMA (UMTS).

Description : List specification of 3G W- CDMA (UMTS).

Last Answer : Specifications of UMTS are:  1. It is more robust for multipath delays.  2. It provides higher immunity towards frequency selective fading.  3. It has very high packet data rates of 2.048Mbps. ... such as voice, data, multimedia, internet etc.  11. It has global seamless connectivity (roaming). 

List specification of zener diode

Description : List specification of zener diode

Last Answer : 1. Zener Voltage 2. Maximum Zener current 3. Power dissipation 4. Operating temperature 5. Dynamic Resistance 

What is the Power Supply specification for 8085AH microprocessor?

Description : What is the Power Supply specification for 8085AH microprocessor? A) Single +5V supply with 10% voltage margins B) Dual +5V supply with 10% voltage margins C) Single +10V supply with 5% voltage margins D) Dual +5V supply with 5% voltage margins 

Last Answer : What is the Power Supply specification for 8085AH microprocessor? A) Single +5V supply with 10% voltage margins B) Dual +5V supply with 10% voltage margins C) Single +10V supply with 5% voltage margins D) Dual +5V supply with 5% voltage margins 

A certain power MOSFET has a maximum junction temperature specification of 1500o C, a junction-to-case

Description : A certain power MOSFET has a maximum junction temperature specification of 1500o C, a junction-to-case thermal resistance of 1.00 C/W, and a junction-to ambient thermal resistance of 600 C/W. If the ambient temperature is 300o C ... the device will be A) 1.52 W B) 1.72 W C) 1.92W D) 2.00 W

Last Answer : A certain power MOSFET has a maximum junction temperature specification of 1500o C, a junction-to-case thermal resistance of 1.00 C/W, and a junction-to ambient thermal resistance of  ... 300o C, then the maximum allowable power dissipation in the device will be 2.00 W 

Why inductor current lags inductor voltage ?

Description : Why inductor current lags inductor voltage ?

Last Answer : Inductor is a wire wounding structure having a core material it induces emf which is opposite to the voltage supply and proportional to rate of change of current so current lags the voltage in inductor

An inductor is connected in series with SCR to protect it from

Description : An inductor is connected in series with SCR to protect it from A) Excessive high voltage B) Excessive high dv/dt C) Excessive high di/dt D) Excessive large forward current 

Last Answer : An inductor is connected in series with SCR to protect it from Excessive high di/dt

What are the types of power losses in inductor?

Description : What are the types of power losses in inductor?

Last Answer : Copper losses, Eddy current loss, and hysteresis loss are the types of power losses in inductor.

What is the difference between a coil and an inductor?

Description : What is the difference between a coil and an inductor?

Last Answer : Inductor is covering with insulating material is called coil.so they differentiate between coil and inductor.

Give the applications of IGBT

Description : Give the applications of IGBT

Last Answer : 1) AC and DC motor drives 2) SMPS 3) Inverters 4) Choppers 5) Solid-state Relays 6) solid-state Contactors

Source transformation Replace the circuit with voltage source in series with a single resistor

Description : Source transformation Replace the circuit with voltage source in series with a single resistor

Last Answer : Source transformation Replace the circuit with voltage source in series with a single resistor

Find current through resistor using nodal analysis

Description : Find current through resistor using nodal analysis

Last Answer : Find current through resistor using nodal analysis

Which of the following is NOT a non-linear resistor?

Description : Which of the following is NOT a non-linear resistor? A) Varistor B) Precision resistor C) NTC thermistor D) PTC thermistor 

Last Answer : Which of the following is NOT a non-linear resistor? A) Varistor B) Precision resistor C) NTC thermistor D) PTC thermistor 

A resistor in which the resistance changes exponentially with change in temperature is called as

Description :  A resistor in which the resistance changes exponentially with change in temperature is called as A) Potentiometer B) Phototransistor C) Varactor D) Thermistor 

Last Answer :  A resistor in which the resistance changes exponentially with change in temperature is called as Thermistor 

A 1000Ohm, 1 Watt resistor can safely pass a current of

Description : A 1000Ohm, 1 Watt resistor can safely pass a current of

Last Answer : A 1000 Ohm, 1 Watt resistor can safely pass a current of 30 mA

In a 5 bit weighted resistor D/A converters, the resistor value corresponding to LSB is 40 kΩ, and the resistor

Description : In a 5 bit weighted resistor D/A converters, the resistor value corresponding to LSB is 40 kΩ, and the resistor value corresponding to MSB will be (A) 0.4 kΩ (B) 3 kΩ (C) 2.8 kΩ (D) 2.5 kΩ

Last Answer : In a 5 bit weighted resistor D/A converters, the resistor value corresponding to LSB is 40 kΩ, and the resistor value corresponding to MSB will be 2.5 kΩ 

An open resistor, when checked with an ohm-meter reads?

Description : An open resistor, when checked with an ohm-meter reads?

Last Answer : An open resistor, when checked with an ohm-meter reads infinite.

Standard resistor is made from?

Last Answer : Standard resistor is made from maganin.

Can a supernode contain a resistor?

Description : Can a supernode contain a resistor?

Last Answer : contain

Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Description : Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Last Answer : Parts Insulating Materials  Insulation between heating element and base plate of electric iron. Mica Insulation used over copper or aluminium conductor used for making coils.  ... Transformer bushings Porcelain  Insulation between transmission line and pole. Porcelain

Compare between BJT and FET on the basis of (i) Biolar/Unipolar (ii) Tharmal Runaway (iii) Noise (iv) Applications

Description : Compare between BJT and FET on the basis of (i) Biolar/Unipolar (ii) Tharmal Runaway (iii) Noise (iv) Applications

Last Answer : Parameter BJT FET Bipolar/Unipolar It is bipolar device i.e. current in this device is carried by electrons and holes. It is unipolar device i.e. current ... in oscilloscopes, electronic voltmeters and other measuring and testing equipment because of their high input impedance.

State the function of following parts in Induction motor. (i) Stator (ii) Slip rings

Description : State the function of following parts in Induction motor. (i) Stator (ii) Slip rings

Last Answer : Name of part Function Stator 1) Stator frame supports the core, terminal box and protects the inner parts. 2) Stator core houses stator winding. 3) Stator winding ... ) Provides facility to connect external resistance to rotor circuit through brushes for starting and control.

Draw the symbol of i) Iron core inductor ii) variable capacitor iii) resistor iv) Ferrite core inductor

Description : Draw the symbol of i) Iron core inductor ii) variable capacitor iii) resistor iv) Ferrite core inductor

Last Answer :  Iron core inductor:  Ferrite core inductor:  

Charging Action of capacitor

Description : Charging Action of capacitor

Last Answer : Charging Action of capacitor .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Capacitor : Before charging takes place

Description : Capacitor : Before charging takes place

Last Answer : Capacitor : Before charging takes place

Why is a capacitor used in a single phase motor and not in three phase motor ?

Description : Why is a capacitor used in a single phase motor and not in three phase motor ?

Last Answer : In 1-phase induction motor capacitor work is generate the auxiliary winding current than excite the main winding to rotor starts rotate. After rotor start rotating about 75% of their speed than auxiliary ... emf to start the motor.so,in 3-phase induction motor is self start induction motor.

Does current flow through a capacitor ?

Description : Does current flow through a capacitor ?

Last Answer : Imagine a pipe with a flexible diaphram in the middle separating two haves of the pipe. Now the pipe is filled with air. If you apply a pressure to one end the diaphram will deform ... capacitor, the effects on electrons will be recreated across the boundary. But theres no electrical connection...

Why is a capacitor used in a ceiling fan ?

Description : Why is a capacitor used in a ceiling fan ?

Last Answer : For splitting phase so that a rotating magnetic field will be produced & as per Lenz's law a torque will be created & rotor starts rotating. In single phase if capacitor is not used for split phase then a pulsating mag. field is produced which is unable to produce torque on rotor

Explain the working of a single phase capacitor start induction motor.

Description : Explain the working of a single phase capacitor start induction motor. 

Last Answer : Single phase capacitor start induction motor https://youtu.be/31lvvzU5Puc

Energy stored in capacitor examples

Description : Energy stored in capacitor examples

Last Answer : Energy stored in capacitor examples

Series and parallel capacitor problem

Description : Series and parallel capacitor problem

Last Answer : Series and parallel capacitor problem 1 : https://youtu.be/MSl5mRwtjAE Series and parallel capacitor problem 2 : https://youtu.be/yGwbpyEtIyw Series and parallel capacitor problem 3 : https:// ... https://youtu.be/_7KwEwWqiNU Series and parallel capacitor problem 10 : https://youtu.be/et8MCWV_OyE

Problem on capacitor

Description : Problem on capacitor

Last Answer : Problem on capacitor 1 : https://youtu.be/ZyT3WOFN8fs Problem on capacitor 2 : https://youtu.be/JBwEfekvutE Problem on capacitor 3 : https://youtu.be/E1lhIn5t8Mo Problem on capacitor 4 : https://youtu.be/yl651f4IUfg

For a DC circuit capacitor is

Description : For a DC circuit capacitor is

Last Answer : For a DC circuit capacitor is virtually an open circuit

What is a capacitor voltage transformer?

Description : What is a capacitor voltage transformer? A) It is a transformer used in power systems to step up low voltage signals and provide extra high voltage B) It is a transformer used in power systems ... in power systems to step down extra high voltage signals and provide low voltage D) None of these

Last Answer : What is a capacitor voltage transformer? A) It is a transformer used in power systems to step up low voltage signals and provide extra high voltage B) It is a transformer used in power systems ... power systems to step down extra high voltage signals and provide low voltage D) None of these

What happens to the capacitance if mica is inserted between the plates of an air capacitor?

Description : What happens to the capacitance if mica is inserted between the plates of an air capacitor? A) The capacitance increases B) The capacitance decreases C) The capacitance remains the same D) The capacitance becomes zero

Last Answer : What happens to the capacitance if mica is inserted between the plates of an air capacitor? A) The capacitance increases B) The capacitance decreases C) The capacitance remains the same D) The capacitance becomes zero

What is the charge on each capacitor when a 150 V is applied across two capacitors with values 5 μF and 10 μF,

Description : What is the charge on each capacitor when a 150 V is applied across two capacitors with values 5 μF and 10 μF, connected in series? A) 500 μC B) 0.5 μC C) 0.5 C D) None of these

Last Answer : What is the charge on each capacitor when a 150 V is applied across two capacitors with values 5 μF and 10 μF, connected in series? A) 500 μC B) 0.5 μC C) 0.5 C D) None of these

What is the stored energy when 200 V is applied across a 7 μF capacitor?

Description : What is the stored energy when 200 V is applied across a 7 μF capacitor? A) 1400 Joules B) 0.7 Joules C) 0.14 Joules D) None of these

Last Answer : What is the stored energy when 200 V is applied across a 7 μF capacitor? A) 1400 Joules B) 0.7 Joules C) 0.14 Joules D) None of these

Which of the following can be used to measure the capacitance of a capacitor?

Description : Which of the following can be used to measure the capacitance of a capacitor? A) Rheostat B) Schering bridge C) Wheatstone bridge D) None of these

Last Answer : Which of the following can be used to measure the capacitance of a capacitor? A) Rheostat B) Schering bridge C) Wheatstone bridge D) None of these

Dielectric loss in a capacitor is best measured by

Description : Dielectric loss in a capacitor is best measured by (A) Wien Bridge (B) Schering Bridge (C) Anderson Bridge (D) Heaviside-Campbell Equal Ratio Bridge

Last Answer : Dielectric loss in a capacitor is best measured by Schering Bridge

A capacitor is generally a?

Description : A capacitor is generally a?

Last Answer : A capacitor is generally a linear and bilateral component.

Power factor of an inductive circuit is usually improved by connecting capacitor to it in?

Description : Power factor of an inductive circuit is usually improved by connecting capacitor to it in?

Last Answer : Power factor of an inductive circuit is usually improved by connecting capacitor to it in parallel.