Compare the AC and DC Arc lamps.

1 Answer

Answer :

AC Arc Lamp
DC Arc Lamp
Cross section area of electrode is same
Cross section area of electrode is positive rod is twice that of negative rod
Series inductor is used for stability
Series resistance used for stability
Voltage required is (39 +2.8 L)V Where L is length of arc in mm 
Voltage is required 40V to 60V
AC supply is used for AC arc lamp
DC supply is used for DC arc lamp
Luminous efficiency is less
Luminous efficiency is high

Related questions

Description :  Compare the salient features of LED and CFL based on: i] Lamp Efficiency ii] Life span 

Last Answer : Parameter LED CFL Lamp Efficiency  High (more than 70 lumen per watt) Comparatively less (50-60 lumen per watt) Life span (in working hours) 10000 3000

Description : Compare between Resistance welding and Arc welding on any six points.

Last Answer : Sr.No Parameters Resistance Welding Arc Welding 1 Type of welding Plastic/Pressure/Non-fusion welding Fusion/Non pressure welding 2 Principle of heat developed Heat ... It is suitable for mass production It is suitable for heavy job, maintenance and repair work

Description : State the modification to be done in dc series motor to work satisfactorily as ac series motor. State applications of ac series motor.

Last Answer : Modifications are necessary in a dc series motor so that it operates satisfactorily on ac supply. The modifications are as follows:  1) AC series motor is built with a few field turns as ... and grinders 5) High speed vacuum cleaners 6) Sewing machines 7) Food processors 8) Drilling machine 

Description : Is the power line voltage available in our homes a dc or an ac voltage?

Last Answer : The power line voltage available in our homes is AC. Mobile dwellings are the most commonly DC-supplied homes and even then they tend to include AC supply for heavier loads.

Description : Enlist the luminaries used in factory lighting and lux level required in various areas.

Last Answer : Area Luminaries Lux level Office building Fluorescent tube, LED, CFL 500 lux Testing centre Fluorescent tube, LED, CFL 400 to 500 lux Workshop/work place Halogen ... , LED, CFL, Projector lamp, filament lamp, Halogen Lamp, Metal Halide lamp etc Above 600 Lux

Description : State the various lighting calculations methods and Describe any one of them.

Last Answer : Lighting calculation methods: 1. Lumens or Light flux method 2. Point to point or Inverse Square law method 3. Watts per Square meter method i) Lumens or Light ... is taken according to the illumination desired on an average value considering overall efficiency of the lighting system.

Description : State the different types of outdoor flood lighting and where are they used.

Last Answer : There are three types of projectors used for flood lighting :  a) Narrow beam Projector b) Medium angle Projector c) Wide angle Projector a) Narrow beam Projectors: - Light beam with such ... yards, stadiums, car parking area etc. 3) It is used for illuminating advertisements, boarding's etc.

Description : Analyze the effect of supply voltage on performance of LED as regards current, Lumen output, efficacy and life. 

Last Answer : 1) Effect on Current:- In LED current depends upon supply voltage, if voltage get changes then current also change but this change in current will be control by resistors which are connected in series.  2) ...   4) Effect on Life:- If supply voltage is not stable then life of LED get reduced. 

Description : Define the terms incandescent and incandescent lamp.

Last Answer : Incandescent is the phenomenon in which the object emits or creates light when it is heated. An incandescent lamp is a lamp in which the filament is heated by electrical current & light is created.

Description : How does the resistance of a conductor compare to that of an insulator?

Last Answer : The resistance of a conductor can be significantly lower than the resistance of an insulator, depending on each material's atomic properties.

Description : Compare between Hot rolling and Cold rolling.

Last Answer : Hot rolling Cold rolling  Metal is fed to the rolls after being heated above the recrytallization temperature. Metal is fed to the rolls when it is below the recrytallization temperature. ... Hot rolling is the father of the cold rolling. Cold rolling follows the hot rolling.

Description : Why are DC motors used in trains and not AC motors ?

Last Answer : The reason is torque. torque is inversely proportional to speed..i.e when th knowe train comes to rest position to motion.. initial speed is zero..so it requires high starting torque for ... current will flow through field and armature coils then maximum torque is available at the intial condition.

Description : Why is AC considered more efficient than DC?

Last Answer : Ac is more efficient than dc because it is easy to maintain and change the voltage of ac for transmission and distribution purpose. Plant cost of ac transmission is much lower compared to dc transmission. When fault occurs it is easy to interrupt ac supply.

Description : Which is more dangerous AC or DC and why ?

Last Answer : Dc is more dangerous than Ac because in Ac the voltage  will varies but in dc the constant voltage 

Description : What is the conversion between. AC to AC ? DC to DC? AC to DC? DC to AC ?

Last Answer : 1.ac to ac is regulation 2.dc to dc is chopper 3.ac to dc is rectifier 4.dc to ac is inverter

Description : Do you think is DC better than AC to transmit energy?

Last Answer : In Long distance DC transmission will be better in cost. It requires more equipments for flexiblity In short distance AC transmission is better in  cost. It is more Flexible

Description : Distinguish between AC and DC.

Last Answer : Particulars Direct Current Alternating Current Definition It is the current whose magnitude and direction do not change with respect to time. It is the current whose ... system, electroplating, Battery charging, Traction. AC machines, Domestic and industrial supply.

Description : The main advantage of AC over DC is:  (A) Conversion flexibility from one voltage level to other (B) AC can be easily converted into DC by using a rectifier (C) AC is easy to maintain & can be easily distributed at long distances (D) All of the above

Last Answer : Ac is easy to maintain and ac can be easily converted to dc by rectifier .There is no commutator for conversion in ac that's why ac machines are weight less and more efficiency.ac machines occupy less space than dc .

Description : Which of the following motors can run on both AC and DC? A) Universal motor B) Dual wattage motor C) Flexible motor D) All the above

Last Answer : Which of the following motors can run on both AC and DC? A) Universal motor B) Dual wattage motor C) Flexible motor D) All the above

Description : How is a thyristor used to convert AC to DC?

Last Answer : thyristor

Description : What is the difference between an AC and DC generator?

Last Answer : The generator which generates DC voltage is called DC generator and generator which generates AC voltage is called AC generator (or) Alternator. In DC generator armature is rotated and field winding ... generator. A DC generator can generate low voltages but an AC generator can generate upto 11kv.

Description : Do cell phones use AC or DC current?

Last Answer : DC of course.

Description : Is current from a battery AC or DC?

Last Answer : The current from the battery is DC

Description : Is electricity generated in AC or DC?

Last Answer : Electricity   is  generated  in  AC.

Description : What is the difference between AC and DC drive?

Last Answer : AC means alternating current It's Frequency is 50hz Dc means direct current ItsI Frequency is 0Hz

Description : Is it AC or DC electricity in the home?

Last Answer : Obviously its A.C

Last Answer : Igbt alone cant convert dc to ac. igbt half bridge or full bridge or three phase topology could be used to convert dc to ac. also igbt gates should be driven by microcontroller or pwm/spwm gate driving signals ... e4(-) and g4 c2e1 and c4e3 pins are AC output pins. its name is igbt inverter.

Description : Can transformer convert AC to DC?

Last Answer : No, Transformer cannot convert AC to DC.

Description : are AC and DC resistances same?

Last Answer : Resistance is the ability of a circuit or element (which is called resistor) to oppose current. Examples of Resistors with the ability of high resistance are Wood, Air, Mica, Glass, Rubber, Tungsten ... constant. Therefore, only the original resistance of wire comes into play. they are not the same

Last Answer : NO IT ONLY CONVERT FROM AC TO DC BECAUSE DIODE WHICH ARE USED IN IT, ARE UNIDIRECTIONAL.

Last Answer : IT CHANGES NEGATIVE CYCLE IN TO POSITIVE CYCLE FROM AC CURRENT.

Last Answer : Induction motor is a AC motor it is also known as asynchronous motor .

Description : Why does the speed of a DC shunt motor decrease as the load increases?

Last Answer : Because if the load is increasing then the torque must also be increase. If not then the speed of motor will decrease.

Description : Explain construction and working of AC servomotor.

Last Answer : Construction of AC Servo Motor: AC servo motor is mainly composed of a stator and a rotor. Laminated stator core is usually made of silicon steel. Two phase windings are placed in the stator slots at 90 degree ... on rotor. Due to the force or torque acting on the rotor, it is set in motion. 

Description : AC power plugs and sockets

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : Write various advantages of using high mast tower lighting viz a vIz Sodium lamps in circulating areas?

Last Answer : Ans. (i) Better illumination (ii) Vide area illumination (iii)where mass public movement (iv) Where loading & unloading of materials (v) At goods coaches & passenger coaches formation, checking and maintenance.

Description : Ceiling lamps. What are they and how to choose?

Last Answer : Well-chosen lighting can stimulate productive activities and can create an intimate and relaxing atmosphere. The variety of ceiling lights is not limited to traditional center chandeliers. In addition ... Their placement along the perimeter of the bathroom will visually make the room more spacious.

Description : What are the advantages of LED lamps?

Last Answer : What are the advantages of LED lamps? LED lamps have an advantage over fluorescent lamps in the first place in terms of environmental friendliness. Another reason for using LED lamps is ... advantages. Today, such lamps are used in everyday life, for industrial lighting and street lighting.

Description : What kind of lamps are there and how to make the right choice?

Last Answer : What kind of lamps are there and how to make the right choice? Which of the lamps in the store should you choose? Having solved several tasks at once to illuminate the room and create coziness? ... in the room. And, familiar to everyone, fluorescent lamps can create the illusion of a sunny day.

Description : Two 100W, 200V lamps are connected in series across a 200V supply. The total power consumed by each lamp will be in Watts

Last Answer : 4800

Description : Choose the correct order of electric discharge lamps in their increasing order of efficiencies (lumens/watt) :  (A) Sodium vapour lamp, Mercury vapour lamp, Neon lamp  (B) Neon lamp, Sodium vapour ... Mercury vapour lamp, Sodium vapour lamp  (D) Mercury vapour lamp, Sodium vapour lamp, Neon lamp

Last Answer : Choose the correct order of electric discharge lamps in their increasing order of efficiencies (lumens/watt) :  (A) Sodium vapour lamp, Mercury vapour lamp, Neon lamp  (B) Neon lamp, Sodium ... Mercury vapour lamp, Sodium vapour lamp  (D) Mercury vapour lamp, Sodium vapour lamp, Neon lamp

Description : State the insulating materials used in motor. Write temperature class and withstand temperature ranges for them. 

Last Answer : The insulating materials used in motor are as belows: 1. Cotton, 2. Silk, or paper, 3. Press board, 4. Resins 5. PVC 6. Cellulose-Fiber, 7. Enameled coating, etc  ... Over 180° Mica, porcelain, ceramics, glass quartz, asbestos, treated glass fiber or treated asbestos. etc.

Description : Explain the suitability of aluminium as an electrical conductor with respect to its mechanical and electrical properties. 

Last Answer : Following are requirements of conductor:- i) High conductivity :  Material should have high conductivity, So that * cross section of conductor (size) reduces, * Copper losses reduces, * So Efficiency ... . Boiling point is 1820°C 9. Specific gravity is 2.7 10. High resistance to corrosion. 

Description : State the type of insulating materials under Class Y and Class B.

Last Answer : The type of insulating materials under Class Y : 1. Cotton  2. Silk 3. Paper 4. Rubber 5. PVC The type of insulating materials under Class B: 1. Backelite 2. Impregnated varnish 3. Mica 4. Fiber glass 5. Asbestos 

Description : State the impact of inductance and resistance on transmission line performance

Last Answer : Impact of inductance on transmission line: 1) It causes IXL drop in transmission line which affects regulation. 2) It is the only parameter which decides power transmission capacity of line i. ... is very small, it causes losses, temperature rise& poor voltage regulation so it cannot be neglected

Description : State the needs and benefits of star labelling. 

Last Answer : Needs of star labelling: * Star labelling is meanly required to recognize quality of product * Star labelling is also required to determine life and efficiency of the product. * Star labels ... emission and air pollution will be reduces. 5. Market efficiency and compilation will be improve. 

Description : State the difference between energy conservation and energy audit. 

Last Answer : energy conservation Energy audit It is reducing the growth of energy consumption by avoiding unnecessary usage of energy It is an inspection, survey & analysis of energy flows ... Various measuring instruments, with proper sensing elements are required for the energy audit. 

Description : Draw the block diagram of regulated power supply, explain function of each block and draw waveforms of each stage.

Last Answer : 1. A step down transformer 2. A rectifier 3. A filter 4. A regulator Operation of Regulated Power Supply:- Step Down Transformer:- A step down transformer will ... regulator. A regulator will maintain the output constant even when changes at the input or any other changes occur.

Description : Give the function of fuse and switch.

Last Answer : Functions of fuse:  * To break the circuit under fault condition.  * To provide overcurrent protection to the circuit.  * To provide short circuit protection to the circuit.  * To provide ...  * To make the electric circuit manually.  * To break the electric circuit manually.

Description : Explain the concept of lagging and leading phase angle by waveform.

Last Answer : i) Leading phase angle :  When two ac quantities of same frequency do not attain their respective zero or peak values simultaneously, then the quantities are said to be out-of-phase quantities. The ... Similarly, in the second diagram, the voltage is said to be lagging the current by  Φ.