Define Energy conservation.

Define Energy conservation. 
by

1 Answer

Answer :

Energy conservation: 

Reduction in the amount of energy consumed in a process or system, or by an organization or society, through economy, elimination of waste, and rational use is referred as energy conservation. 

 OR 

 It is defined as reducing growth of energy consumption by avoiding unnecessary usages of energy by applying the energy conservation techniques. 

OR

 It’s the process of reduction in the growth of electrical power utilization and to avoid unnecessary use of electrical power and to increase the efficiency of every machine and material by minimizing the losses.
by

Related questions

State the difference between energy conservation and energy audit.

Description : State the difference between energy conservation and energy audit. 

Last Answer : energy conservation Energy audit It is reducing the growth of energy consumption by avoiding unnecessary usage of energy It is an inspection, survey & analysis of energy flows ... Various measuring instruments, with proper sensing elements are required for the energy audit. 

List the energy conservation technique in induction motor.

Description : List the energy conservation technique in induction motor. 

Last Answer : Following are the list of energy conservation techniques in electrical motors: 1) Reduction in iron losses by using low loss silicon steel core material laminated to thinner dimension. 2) Using bigger length ... at light load. 13) By rewinding in induction motor 14) By motor survey

Discuss how power factor tariff results into energy conservation.

Description : Discuss how power factor tariff results into energy conservation.

Last Answer : Power factor tariff results into energy conservation: i) Applying incentives and penalties according to power factor is an effective way, which enables consumer to improve power factor so that he can ... finally leads to reduction in the current drawn by the load and helps for energy conservation.

Explain the need of energy conservation in present scenario.

Description : Explain the need of energy conservation in present scenario.

Last Answer : Need of energy conservation in present scenario: 1. Fossil fuels like coal, oil which have taken no. of years to form and now they are on the verge of depleting soon. 2. In last ... protection and integrated economic and social development. 9. Energy saved is as good as energy generated. 

Explain the “mitigation of power theft” and “faulty meter replacement” for energy conservation techniques to reduce commercial losses.

Description : Explain the “mitigation of power theft” and “faulty meter replacement” for energy conservation techniques to reduce commercial losses. 

Last Answer : Energy conservation techniques to reduce commercial losses:  1. Mitigation of Power Theft: Power theft being the most important issue which all of the service providing utilities ... agricultural sector. Prepaid meters may prove effective measures against unauthorized abstraction of energy. 

Explain following techniques related to energy conservation in transmission and distribution system. (i) By balancing phase currents (ii) Variable technical losses (I2R losses).

Description : Explain following techniques related to energy conservation in transmission and distribution system. (i) By balancing phase currents (ii) Variable technical losses (I2R losses).

Last Answer : (i) Balancing Phase currents: Proper (healthy balanced) three phase loads always draw equal currents in all lines but single phase loads in the 3 phase 4 wire system or loads connected between two ... . 11) Minimize I2R losses. 12) Balance the load currents. 13) Regulate the system voltages.

What is Time of Day tariff? How it help in energy conservation?

Description : What is Time of Day tariff? How it help in energy conservation?

Last Answer : Time-off-day tariff:- In addition to basic tariff (Maximum Demand Tariff / KVA Maximum Demand Tariff / Load factor tariff /also the tariff in which P.F. of industrial consumer is taken ... the rated load for longer times of the day their overall efficiency gets higher helping to conserve energy.

Explain energy conservation technique in induction motor by minimizing idle and redundant running of motor.

Last Answer : Energy conservation technique in induction motor by minimizing idle and redundant running of motor: 1) Loss of energy as the no load power drawn is approximately about 12% to 16% of rated ... to unnecessary line losses. 4) Reduction in overall system energy efficiency over period of time.

State the need of energy conservation in transformer.

Description : State the need of energy conservation in transformer. 

Last Answer : Need of energy conservation in transformer: In electrical power system, transformers are used to change the voltage levels of different sections as per the need of economic and efficient operation of ... for some other good reason. Therefore, there is need of energy conservation in transformer.

State the need of energy conservation in electrical motor.

Description : State the need of energy conservation in electrical motor.

Last Answer : Need of energy conservation in Electrical motors: 1. Induction motors are used as electrical drives in industrial, commercial and residential sectors. 2. Considering all industrial applications, 70% of ... system. 8. To adopt advanced technology in design and to use better quality materials.

Explain any two energy conservation techniques in fan.

Description : Explain any two energy conservation techniques in fan.

Last Answer : Following are energy conservation techniques in Fans : 1) Use the electronic regulators instead of conventional regulator: Function of regulator is to control the speed of the fan. The conventional regulators ... 't forget to properly maintain your electric fan and keep it in good working order. 

Explain energy conservation method in lighting system by using installation of separate transformer / servo stabilizer.

Description : Explain energy conservation method in lighting system by using installation of separate transformer / servo stabilizer.

Last Answer : Energy conservation techniques by installation of separate transformer / servo stabilizer: The luminous efficiency of lamps depends upon the voltage applied across the terminals. It gives its best ... the voltage constant in that installation for giving best luminous efficiency of lamps.

Describe the following energy conservation methods of lighting system. i) By replacing lamp sources ii) Using light control gears.

Description : Describe the following energy conservation methods of lighting system. i) By replacing lamp sources ii) Using light control gears.

Last Answer : Energy conservation methods of lighting system:  i) By replacing lamp sources:  Installation of energy efficient fluorescent lamps in place of Conventional fluorescent lamps. Installation of ... (HF) electronic ballasts in place of conventional ballasts which saves energy up to 35%.

Describe the following energy conservation methods of electrical motor. i) By motor survey ii) By matching loads with motor rating

Description : Describe the following energy conservation methods of electrical motor. i) By motor survey ii) By matching loads with motor rating

Last Answer : Energy conservation methods of electrical motor:  1) By Motor Survey: Large industries have a massive population of LT motors. Load survey of LT motors can be taken-up methodically to ... -speed motors, eddy-current couplings, fluid couplings, and solid-state electronic variable speed drives.

Explain energy conservation technique “by improving power quality” for induction motor.

Description : Explain energy conservation technique “by improving power quality” for induction motor.

Last Answer : Energy conservation method in induction motor by improving power quality: Electrical energy can be conserved by improving the power quality. It can be achieved by avoiding voltage unbalance, maintaining ... losses can be minimized by using harmonic filter thus reducing the harmonics in the system.

Explain about Electric Energy Conservation? How Energy conservation can be done in Lighting?

Description : Explain about Electric Energy Conservation? How Energy conservation can be done in Lighting?

Last Answer : Ans: Today in India, the per capita availability of energy is much less than the energy in developed countries. The demand for energy is always out placing availability, the shortfall being ... In streets of rural areas and side streets, street lighting luminaires with fluorescent lamps are used.

What do you mean by energy conservation? why it is required and how it can be done?

Description : What do you mean by energy conservation? why it is required and how it can be done?

Last Answer : Ans Energy conservation means saving of Electricity without fore going its utility. Conservation is required in present scenario of growing demand of power, depleting of natural resources and increase of and lack of ... pumps. i. Use of APFC panels j. Use of copper wiring inplace of Aluminum wiring.

State the Principle of energy conservation.

Description : State the Principle of energy conservation.

Last Answer : Principle of energy conservation: The law of conservation of energy states that the total energy of an isolated system remains constant-it is said to be conserved over time. Energy can neither be ... due to burning of fuels, greenhouse gases and avoid harmful effects on all livings on earth. 

Define energy. Write unit of it.

Description : Define energy. Write unit of it.

Last Answer : Energy :-  Electrical energy is defined as the work done in moving electrical charge in electrical fields over specific time duration  OR  The total power delivered or consumed by consumer over specific time duration.  ... the power w.r.t. time  Unit :- Its Unit in watt sec., WHr., KWHr.

Define the following terms and state their units: (i) Luminous intensity, (ii) Luminous flux

Description : Define the following terms and state their units: (i) Luminous intensity, (ii) Luminous flux

Last Answer : i) Luminous intensity: This is defined as the luminous flux emitted into a solid angle of space in a specific direction. Its unit is the candela.  OR  The luminous flux per unit solid angle ( ... energy radiated by the light source in all direction. The unit of luminous flux is lumen (lm) 

Explain stepwise the “Detailed energy audit” procedure.

Description : Explain stepwise the “Detailed energy audit” procedure.

Last Answer : A) Start up meeting: For this programme, we proceed with this meeting. If then continue us until implementation of energy saving measures. B) Analysis of energy used: Identify where ... are considered, the analysis of energy loss and measurement of insulation level is also considered.

Where does the money donated to "save the ___ animal" actually go?

Description : Where does the money donated to "save the ___ animal" actually go?

Last Answer : answer:Charities (non-profits) need to file information with the IRS in order to keep their tax exemption. Among other numbers, they need to report: - program expenses (actually helping the animals) ... Here is a REAL BAD one: http://www.charitynavigator.org/index.cfm?bay=search.summary&orgid=12761

Should one turn off the hot water heater if not using the house for a week? or just leave it on?

Description : Should one turn off the hot water heater if not using the house for a week? or just leave it on?

Last Answer : answer:I would leave the heater on but turn off the main water supply. I had a small leak in a copper pipe the was undetectible. We left for a week and when we got home the pipe had split and we had ... left on. The water won't be used so the tank will be full and the heater will seldom kick on.

Define brazing.

Description : Define brazing.  

Last Answer : Brazing: It is a metal joining process in which two or more metal items are joined together by melting and flowing a filler metal into the joint, the filler metal having a lower melting point than the adjoining metal. 

Define absolute pressure, atmospheric pressure.

Description : Define absolute pressure, atmospheric pressure.

Last Answer : Absolute Pressure : Absolute pressure is defined as actual total pressure including atmospheric pressure acting on a surface  Unit of absolute pressure is pounds per square inch absolute and it ... by the air surrounding to the earth. Unit of atmospheric pressure is Pounds per square inch.

Define: 1) Electrode 2) Electrolyte

Description : Define: 1) Electrode 2) Electrolyte

Last Answer : Electrode: An electrode is a small piece of metal or other substance that is used to take an electric current to or from the source of power.  Electrolyte: The substance which is ... electric current to pass through it, resulting in the chemical decomposition, is known as an electrolyte.  

Define earthing. State its types.

Description : Define earthing. State its types.  

Last Answer : Definition of earthing: * Earthing means connecting the metal body of electrical device to the general mass of earth by a wire of negligible resistance. OR * Earthing means connecting the metal body of ... ii) Pipe type earthing iii) Rod type earthing iv) Strip earthing v)Water main earthing

Define Feed and speed in shaping machine

Description : Define Feed and speed in shaping machine

Last Answer : 1) Feed: Feed (S) is the relative movement of the work or tool in a direction perpendicular to the axis of reciprocation of the ram per double stroke. It is expressed in mm per stroke. 2) Speed: ... speed is the speed at which the metal is removed by the cutting tool in a period of one minute.

Define armature reaction in an alternator. Explain the effect of armature reaction at various P.F. of loads of alternator.

Description : Define armature reaction in an alternator. Explain the effect of armature reaction at various P.F. of loads of alternator.

Last Answer : Armature Reaction: The effect of armature flux on main flux is called as armature reaction.  Armature Reaction at Various Power Factors: When armature is loaded, the armature flux modifies ... lagging p.f. For capacitive loads the effect of flux is partly distorting and partly strengthening.

Define impedance diagram and reactance diagram.

Description : Define impedance diagram and reactance diagram.

Last Answer : Impedance diagram: Impedance diagram is the simplified equivalent circuits of single line or one line diagrams of power system in which all components are represented by their equivalent circuit.  ... machines are neglected and is used only for fault current calculation is called reactance diagram.

Define leakage factor.

Description : Define leakage factor.

Last Answer : It is the ratio of total flux to leakage flux.

Define the terms incandescent and incandescent lamp.

Description : Define the terms incandescent and incandescent lamp.

Last Answer : Incandescent is the phenomenon in which the object emits or creates light when it is heated. An incandescent lamp is a lamp in which the filament is heated by electrical current & light is created.

Define Enhance lighting.

Description : Define Enhance lighting.

Last Answer : Enhance lighting: Enhance lighting is the lighting with various colour effect and controlled light intensity, used for decoration and effective visualization of gold, silver, diamond and watches showroom purpose.

Define PIV, TUF, ripple factor, efficiency of rectifier.

Description : Define PIV, TUF, ripple factor, efficiency of rectifier.

Last Answer : PIV: Peak Inverse Voltage (PIV) is defined as the maximum negative voltage which appears across non-conducting reverse biased diode. TUF : Transformer Utilization Factor (TUF) is defined as the ratio of DC output ... Efficiency of rectifier: η = DC output power/ AC input power = PLdc / Pac

Define Analog Transducer and give examples of it

Description : Define Analog Transducer and give examples of it

Last Answer : Analog Transducer: An analog transducer is a device that converts the input signal into a continuous DC signal of voltage or current. Examples: * Strain gauge * L.V.D.T * Thermocouple * Thermistor

Define resistor and draw symbol of variable resistor.

Description : Define resistor and draw symbol of variable resistor.

Last Answer : Resistor: A resistor is an electrical component that limits or regulates the flow of electrical current in an electronic circuit. Symbol of variable resistor:   

Define: i) Input Offset Voltage ii) Input offset Current iii) Input Bias Current iv) Output offset voltage

Description : Define: i) Input Offset Voltage ii) Input offset Current iii) Input Bias Current iv) Output offset voltage

Last Answer : Definition of parameters of OPAMP is follows:  i) Input Offset Voltage: Input offset voltage is defined as the voltage that must be applied between the two input terminals of an OPAMP to null or ... to ground) and output voltage is obtained non zero such voltage is output offset voltage of opamp.

Define Multivibrator. State the types of multivibrator. Which M/V can be used as a flip-flop? Draw the circuit diagram.

Description : Define Multivibrator. State the types of multivibrator. Which M/V can be used as a flip-flop? Draw the circuit diagram.

Last Answer : Definition:- A multivibrator is an electronic circuit that switches rapidly by means of positive feedback between two or more states.  OR  A multivibrator is an electronic circuit used to implement a ... Bistable Multivibrator: it can operate as a flip-flop, Circuit diagram 

What do you mean by active filter? State its advantages over passive filter . Define pass band & stop band with respect to filter.

Description : What do you mean by active filter? State its advantages over passive filter . Define pass band & stop band with respect to filter.

Last Answer : Active Filter: Active Filter is formed by using active element along with the passive components.  Advantages of Active filter over Passive filter: High value of pass band gain can be obtained. It is ... pass band.  Stop Band Filter: The frequency range which is attenuated is known as stop band.

Define Sample and hold period with reference to S/H circuit.

Description : Define Sample and hold period with reference to S/H circuit.

Last Answer : Sample Period:- The time period during which the voltage across the capacitor is equal to the input voltage is called sample period. Hold Period:- The time period during which the voltage across the capacitor is constant is called hold period.

Define Dielectric Strength for transformer oil. State its value for new transformer oil.

Description : Define Dielectric Strength for transformer oil. State its value for new transformer oil.

Last Answer : Dielectric strength is defined as the maximum voltage that can be applied to across to the Fulid with out electrical breakdown is called Dielectric strength.

Define Resonance.

Description : Define Resonance. 

Last Answer : When the frequency of the external periodic force applied to a body is exactly equal to ( matches) natural frequency of body, the body vibrates with maximum amplitude, the effect is known as resonance 

Define the following: i) Residential load ii) Industrial load

Description : Define the following: i) Residential load ii) Industrial load

Last Answer : i) Residential load: The electrical load which is used in residential installation is called as residential load. E.g. incandescent lamp, florescent tube, fan ,5A socket &15A socket etc.   ii ... 3-ph any type of motor, electric furnace ,oven,welding transformer and any power load etc. 

Define Tender and state any three requirements of valid contract.

Description : Define Tender and state any three requirements of valid contract.

Last Answer : Meaning Tender:- Tender is offer or invitation of the work between any two parties. This offer may be written or non written. This offer is given by party no.1 (owner) to party no.2 ( ... . Contract should be signed by proper authorized persons. 6. It should be legally challenged in the court.

Define contract and state its types.

Description : Define contract and state its types.

Last Answer : Definition of Contract:- The agreement between two parties under some specific terms and conditions is known as contract.  Types of Engineering contract:- 1) Lump sum contract 2) Item rate contract 3) ... contract 11)Cost plus(+) fluctuating fees rate contract 12) Cost plus(+) fix fee contract 

Define service connection and state types connection and state types of overhead service connection

Description : Define service connection and state types connection and state types of overhead service connection

Last Answer : Service Connection:- It is the input conductor or wire which is carried out from supply company (authorities) pole to consumers' main board or premises. Types of overhead service ...  1. Overhead service connection with Bare conductor 2. Overhead service connection with weather proof cable  

Define Electrical Installation and give its classification.

Description : Define Electrical Installation and give its classification.

Last Answer : Meaning of Electrical installation : Electrical installation is a process of estimation and erection of electrical wiring with materials, and electrical machines used by ... Residential Electrical Installation ii) Commercial Electrical Installation iii) Industrial Electrical Installation 

Define laminar flow and turbulent flow.

Description : Define laminar flow and turbulent flow.

Last Answer : Laminar flow : When a fluid flowing through the pipe at different speeds (fast at center and slow at edges), and the fluid particles move in layers with one layer sliding over the adjacent ... successive cross sections, then this flow is called as turbulent flow. Reynolds no is greater than 4000 

Define transducer. Give two examples.

Description : Define transducer. Give two examples.

Last Answer : Transducer - It converts one form of signal into another form. A transducer is a device that is used to convert a physical quantity into its corresponding electrical signal.  Classification - 1. Active transducer 2. Passive transducer 

Define natural, mechanical, forced and induced draught systems.

Description : Define natural, mechanical, forced and induced draught systems.

Last Answer : Natural draught system: - When the fuel is burnt (combustion) in the furnace due to natural circulation of air, the draught is called natural draught. Mechanical draught system: -  In a mechanical ... combustion. OR If fan/blower is placed after the furnace then it is called as induced draught